74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
Rev. 3 — 26 March 2018 Product data sheet
1 General description
The 74HC138-Q100; 74HCT138-Q100 decodes three binary weighted address inputs
(A0, A1 and A2) to eight mutually exclusive outputs (Y0 to Y7). The device features three
enable inputs (E1, E2 and E3). Every output will be HIGH unless E1 and E2 are LOW
and E3 is HIGH. This multiple enable function allows easy parallel expansion to a 1-of-32
(5 to 32 lines) decoder with just four '138 ICs and one inverter. The '138 can be used
as an eight output demultiplexer by using one of the active LOW enable inputs as the
data input and the remaining enable inputs as strobes. Inputs include clamp diodes. This
enables the use of current limiting resistors to interface inputs to voltages in excess of
VCC.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2 Features and benefits
•Automotive product qualification in accordance with AEC-Q100 (Grade 1)
–Specified from -40 °C to +85 °C and from -40 °C to +125 °C
•Complies with JEDEC standard no. 7A
•Input levels:
–For 74HC138-Q100: CMOS level
–For 74HCT138-Q100: TTL level
•Demultiplexing capability
•Multiple input enable for easy expansion
•Ideal for memory chip select decoding
•Active LOW mutually exclusive outputs
•ESD protection:
–MIL-STD-883, method 3015 exceeds 2000 V
–HBM JESD22-A114F exceeds 2000 V
–MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)
•Multiple package options
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
2 / 17
3 Ordering information
Table 1. Ordering information
PackageType number
Temperature range Name Description Version
74HC138D-Q100
74HCT138D-Q100
-40 °C to +125 °C SO16 plastic small outline package; 16 leads;
body width 3.9 mm
SOT109-1
74HC138PW-Q100
74HCT138PW-Q100
-40 °C to +125 °C TSSOP16 plastic thin shrink small outline package;
16 leads; body width 4.4 mm
SOT403-1
74HC138BQ-Q100
74HCT138BQ-Q100
-40 °C to +125 °C DHVQFN16 plastic dual in-line compatible thermal enhanced
very thin quad flat package; no leads;
16 terminals; body 2.5 × 3.5 × 0.85 mm
SOT763-1
4 Functional diagram
Y0
Y1
Y2
Y3
Y4
Y5
Y6
Y7 7
9
10
11
12
13
14
15A0
A1
A23
2
1
6
5
4
E2
E1
E3
mna370
Figure 1. Logic symbol
mna372
ENABLE
EXITING
Y0
Y1
Y2
Y3
Y4
Y5
Y6
Y7 7
9
10
11
12
13
14
15
A0
A1
A2
3-to-8
DECODER
3
2
1
6
5
4
E2
E1
E3
Figure 2. Functional diagram
001aae059
Y6
Y7
E1
E2
E3
A0
A1
A2
Y4
Y5
Y2
Y3
Y0
Y1
Figure 3. Logic diagram
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
3 / 17
5 Pinning information
5.1 Pinning
74HC138
74HCT138
A0 VCC
A1 Y0
A2 Y1
E1 Y2
E2 Y3
E3 Y4
Y7 Y5
GND Y6
aaa-028342
1
2
3
4
5
6
7
8
10
9
12
11
14
13
16
15
Figure 4. Pin configuration SOT109-1
(SO16)
74HC138
74HCT138
A0 VCC
A1 Y0
A2 Y1
E1 Y2
E2 Y3
E3 Y4
Y7 Y5
GND Y6
aaa-028343
1
2
3
4
5
6
7
8
10
9
12
11
14
13
16
15
Figure 5. Pin configuration SOT403-1
(TSSOP16)
aaa-028344
74HC138
74HCT138
Y7 Y5
E3 Y4
E2 Y3
E1 Y2
A2 Y1
A1 Y0
GND
Y6
A
0
V
C
C
Transparent top view
7 10
6 11
5 12
4 13
3 14
2 15
8
9
1
16
terminal 1
index area
(1) This is not a supply pin. The
substrate is attached to this pad using
conductive die attach material. There is
no electrical or mechanical requirement
to solder this pad.However, if it is
soldered, the solder land should remain
floating or be connected to GND.
Figure 6. Pin configuration SOT763-1
(DHVQFN16)
5.2 Pin description
Table 2. Pin description
Symbol Pin Description
A0, A1, A2 1, 2, 3 address input
E1, E2 4, 5 enable input (active LOW)
E3 6 enable input (active HIGH)
Y0, Y1, Y2, Y3, Y4, Y5, Y6, Y7 15, 14, 13, 12, 11, 10, 9, 7 output (active LOW)
GND 8 ground (0 V)
VCC 16 supply voltage
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
4 / 17
6 Functional description
Table 3. Function table [1]
Control Input Output
E1 E2 E3 A2 A1 A0 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
H X X
X H X
XXL
XXXHHHHHHHH
L L L HHHHHHHL
L L HHHHHHHL H
L HL HHHHHL HH
L HHHHHHL HHH
HL L HHHL HHHH
HL HHHL HHHHH
HHL HL HHHHHH
LLH
HHHL HHHHHHH
[1] H = HIGH voltage level;
L = LOW voltage level;
X = don’t care.
7 Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
VCC supply voltage -0.5 +7 V
IIK input clamping current VI < -0.5 V or VI > VCC + 0.5 V - ±20 mA
IOK output clamping current VO < -0.5 V or VO > VCC + 0.5 V - ±20 mA
IOoutput current VO = -0.5 V to (VCC + 0.5 V) - ±25 mA
ICC quiescent supply current - 50 mA
IGND ground current -50 - mA
Tstg storage temperature -65 +150 °C
Ptot total power dissipation [1] - 500 mW
[1] For SO16 package: Ptot derates linearly with 8 mW/K above 70 °C.
For TSSOP16 packages: Ptot derates linearly with 5.5 mW/K above 60 °C.
For DHVQFN16 packages: Ptot derates linearly with 4.5 mW/K above 60 °C.
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
5 / 17
8 Recommended operating conditions
Table 5. Recommended operating conditions
Voltages are referenced to GND (ground = 0 V)
74HC138-Q100 74HCT138-Q100Symbol Parameter Conditions
Min Typ Max Min Typ Max
Unit
VCC supply voltage 2.0 5.0 6.0 4.5 5.0 5.5 V
VIinput voltage 0 - VCC 0 - VCC V
VOoutput voltage 0 - VCC 0 - VCC V
Tamb ambient temperature -40 +25 +125 -40 +25 +125 °C
VCC = 2.0 V - - 625 - - - ns/V
VCC = 4.5 V - 1.67 139 - 1.67 139 ns/V
Δt/ΔV input transition rise and fall rate
VCC = 6.0 V - - 83 - - - ns/V
9 Static characteristics
Table 6. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Tamb = 25 °C Tamb = -40 °C
to +85 °C
Tamb = -40 °C
to +125 °C
Symbol Parameter Conditions
Min Typ Max Min Max Min Max
Unit
74HC138-Q100
VCC = 2.0 V 1.5 1.2 - 1.5 - 1.5 - V
VCC = 4.5 V 3.15 2.4 - 3.15 - 3.15 - V
VIH HIGH-level
input voltage
VCC = 6.0 V 4.2 3.2 - 4.2 - 4.2 - V
VCC = 2.0 V - 0.8 0.5 - 0.5 - 0.5 V
VCC = 4.5 V - 2.1 1.35 - 1.35 - 1.35 V
VIL LOW-level
input voltage
VCC = 6.0 V - 2.8 1.8 - 1.8 - 1.8 V
VI = VIH or VIL
IO = -20 μA; VCC = 2.0 V 1.9 2.0 - 1.9 - 1.9 - V
IO = -20 μA; VCC = 4.5 V 4.4 4.5 - 4.4 - 4.4 - V
IO = -20 μA; VCC = 6.0 V 5.9 6.0 - 5.9 - 5.9 - V
IO = -4.0 mA; VCC = 4.5 V 3.98 4.32 - 3.84 - 3.7 - V
VOH HIGH-
level output
voltage
IO = -5.2 mA; VCC = 6.0 V 5.48 5.81 - 5.34 - 5.2 - V
VI = VIH or VIL
IO = 20 μA; VCC = 2.0 V - 0 0.1 - 0.1 - 0.1 V
IO = 20 μA; VCC = 4.5 V - 0 0.1 - 0.1 - 0.1 V
IO = 20 μA; VCC = 6.0 V - 0 0.1 - 0.1 - 0.1 V
IO = 4.0 mA; VCC = 4.5 V - 0.15 0.26 - 0.33 - 0.4 V
VOL LOW-level
output
voltage
IO = 5.2 mA; VCC = 6.0 V - 0.16 0.26 - 0.33 - 0.4 V
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
6 / 17
Tamb = 25 °C Tamb = -40 °C
to +85 °C
Tamb = -40 °C
to +125 °C
Symbol Parameter Conditions
Min Typ Max Min Max Min Max
Unit
IIinput leakage
current
VI = VCC or GND; VCC = 6.0 V - - ±0.1 - ±1.0 - ±1.0 μA
ICC supply
current
VI = VCC or GND; IO = 0 A;
VCC = 6.0 V
- - 8.0 - 80 - 160 μA
CIinput
capacitance
- 3.5 - pF
74HCT138-Q100
VIH HIGH-level
input voltage
VCC = 4.5 V to 5.5 V 2.0 1.6 - 2.0 - 2.0 - V
VIL LOW-level
input voltage
VCC = 4.5 V to 5.5 V - 1.2 0.8 - 0.8 - 0.8 V
VI = VIH or VIL; VCC = 4.5 V
IO = -20 μA 4.4 4.5 - 4.4 - 4.4 - V
VOH HIGH-
level output
voltage
IO = -4 mA 3.98 4.32 - 3.84 - 3.7 - V
VI = VIH or VIL; VCC = 4.5 V
IO = 20 μA - 0 0.1 - 0.1 - 0.1 V
VOL LOW-level
output
voltage
IO = 4.0 mA - 0.15 0.26 - 0.33 - 0.4 V
IIinput leakage
current
VI = VCC or GND; VCC = 5.5 V - - ±0.1 - ±1.0 - ±1.0 μA
ICC supply
current
VI = VCC or GND; IO = 0 A;
VCC = 5.5 V
- - 8.0 - 80 - 160 μA
VI = VCC - 2.1 V;
other inputs at VCC or GND;
VCC = 4.5 V to 5.5 V; IO = 0 A
per input pin; An inputs - 150 540 - 675 - 735 μA
per input pin; En inputs - 125 450 - 562.5 - 612.5 μA
ΔICC additional
supply
current
per input pin; E3 input - 100 360 - 450 - 490 μA
CIinput
capacitance
- 3.5 - - - - - pF
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
7 / 17
10 Dynamic characteristics
Table 7. Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); CL = 50 pF unless otherwise specified; for test circuit see Figure 9.
Tamb = 25 °C Tamb = -40 °C
to +85 °C
Tamb = -40 °C
to +125 °C
Symbol Parameter Conditions
Min Typ Max Min Max Min Max
Unit
74HC138-Q100
An to Yn; see Figure 7 [1]
VCC = 2.0 V - 41 150 - 190 - 225 ns
VCC = 4.5 V - 15 30 - 38 - 45 ns
VCC = 5 V; CL = 15 pF - 12 - - - - - ns
VCC = 6.0 V - 12 26 - 33 - 38 ns
E3 to Yn; see Figure 7 [1]
VCC = 2.0 V - 47 150 - 190 - 225 ns
VCC = 4.5 V - 17 20 - 38 - 45 ns
VCC = 5 V; CL = 15 pF - 14 - - - - - ns
VCC = 6.0 V - 14 26 - 33 - 38 ns
En to Yn; see Figure 8 [1]
VCC = 2.0 V - 47 150 - 190 - 225 ns
VCC = 4.5 V - 17 20 - 38 - 45 ns
VCC = 5 V; CL = 15 pF - 14 - - - - - ns
tpd propagation
delay
VCC = 6.0 V - 14 26 - 33 - 38 ns
Yn; see Figure 7
and Figure 8
[2]
VCC = 2.0 V - 19 75 - 95 - 110 ns
VCC = 4.5 V - 7 15 - 19 - 22 ns
tttransition
time
VCC = 6.0 V - 6 13 - 16 - 19 ns
CPD power
dissipation
capacitance
CL = 50 pF; f = 1 MHz;
VI = GND to VCC
[3] - 67 - - - - - pF
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
8 / 17
Tamb = 25 °C Tamb = -40 °C
to +85 °C
Tamb = -40 °C
to +125 °C
Symbol Parameter Conditions
Min Typ Max Min Max Min Max
Unit
74HCT138-Q100
An to Yn; see Figure 7 [1]
VCC = 4.5 V - 20 35 - 44 - 53 ns
VCC = 5 V; CL = 15 pF - 17 - - - - - ns
E3 to Yn; see Figure 7 [1]
VCC = 4.5 V - 18 40 - 50 - 60 ns
VCC = 5 V; CL = 15 pF - 19 - - - - - ns
En to Yn; see Figure 8 [1]
VCC = 4.5 V - 19 40 - 50 - 60 ns
tpd propagation
delay
VCC = 5 V; CL = 15 pF - 19 - - - - - ns
Yn; see Figure 7
and Figure 8
[2]
tttransition
time
VCC = 4.5 V - 7 15 - 19 - 22 ns
CPD power
dissipation
capacitance
CL = 50 pF; f = 1 MHz;
VI = GND to VCC - 1.5 V
[3] - 67 - - - - - pF
[1] tpd is the same as tPLH and tPHL.
[2] tt is the same as tTHL and tTLH.
[3] CPD is used to determine the dynamic power dissipation (PD in μW).
PD = CPD × VCC
2 × fi × N + Σ(CL × VCC
2 × fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
Σ(CL × VCC
2 × fo) = sum of outputs.
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
9 / 17
10.1 Waveforms and test circuit
mna373
An, E3
input
Yn
output
tPHL
tTHL
tPLH
GND
VCC
VM
VM
VOH
VOL
tTLH
Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
Figure 7. Propagation delay input (An) and enable input (E3) to output (Yn) and transition time output (Yn)
mna374
E1, E2
input
Yn
output
tPHL tPLH
GND
VCC
VM
VM
VOH
VOL
tTHL tTLH
Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
Figure 8. Propagation delay enable input (En) to output (Yn) and transition time output (Yn)
Table 8. Measurement points
Input OutputType
VMVM
74HC138-Q100 0.5VCC 0.5VCC
74HCT138-Q100 1.3 V 1.3 V
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
10 / 17
Test data is given in Table 9.
Definitions test circuit:
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
CL = Load capacitance including jig and probe capacitance.
RL = Load resistance.
S1 = Test selection switch.
Figure 9. Test circuit for measuring switching times
Table 9. Test data
Input Load S1 positionType
VItr, tfCLRLtPHL, tPLH tPZH, tPHZ tPZL, tPLZ
74HC138-Q100 VCC 6 ns 15 pF, 50 pF 1 kΩ open GND VCC
74HCT138-Q100 3 V 6 ns 15 pF, 50 pF 1 kΩ open GND VCC
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
11 / 17
11 Package outline
X
wM
θ
A
A1
A2
bp
D
HE
Lp
Q
detail X
E
Z
e
c
L
vMA
(A )
3
A
8
9
1
16
y
pin 1 index
UNIT A
max. A1A2A3bpc D(1) E(1) (1)
e HEL LpQ Zywv θ
REFERENCES
OUTLINE
VERSION
EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm
inches
1.75 0.25
0.10
1.45
1.25 0.25 0.49
0.36
0.25
0.19
10.0
9.8
4.0
3.8 1.27 6.2
5.8
0.7
0.6
0.7
0.3 8
0
o
o
0.25 0.1
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
1.0
0.4
SOT109-1 99-12-27
03-02-19
076E07 MS-012
0.069 0.010
0.004
0.057
0.049 0.01 0.019
0.014
0.0100
0.0075
0.39
0.38
0.16
0.15 0.05
1.05
0.041
0.244
0.228
0.028
0.020
0.028
0.012
0.01
0.25
0.01 0.004
0.039
0.016
0 2.5 5 mm
scale
SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1
Figure 10. Package outline SOT109-1 (SO16)
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
12 / 17
UNIT A1A2A3bpc D (1) E(2) (1)
e HEL LpQ Zywv θ
REFERENCES
OUTLINE
VERSION
EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 0.15
0.05
0.95
0.80
0.30
0.19
0.2
0.1
5.1
4.9
4.5
4.3 0.65 6.6
6.2
0.4
0.3
0.40
0.06
8
0
o
o
0.13 0.10.21
DIMENSIONS (mm are the original dimensions)
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
0.75
0.50
SOT403-1 MO-153 99-12-27
03-02-18
wM
bp
D
Z
e
0.25
1 8
16 9
θ
A
A1
A2
Lp
Q
detail X
L
(A )
3
HE
E
c
vMA
X
A
y
0 2.5 5 mm
scale
TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1
A
max.
1.1
pin 1 index
Figure 11. Package outline SOT403-1 (TSSOP16)
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
13 / 17
terminal 1
index area
0.51
A1Eh
b
UNIT ye
0.2
c
REFERENCES
OUTLINE
VERSION
EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 3.6
3.4
Dh
2.15
1.85
y1
2.6
2.4
1.15
0.85
e1
2.5
0.30
0.18
0.05
0.00 0.05 0.1
DIMENSIONS (mm are the original dimensions)
SOT763-1 MO-241 - - -- - -
0.5
0.3
L
0.1
v
0.05
w
0 2.5 5 mm
scale
SOT763-1
DHVQFN16: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;
16 terminals; body 2.5 x 3.5 x 0.85 mm
A(1)
max.
A
A1
c
detail X
y
y1C
e
L
Eh
Dh
e
e1
b
2 7
15 10
9
8
1
16
X
D
E
C
B A
terminal 1
index area
AC
C
B
vM
wM
E(1)
Note
1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.
D(1)
02-10-17
03-01-27
Figure 12. Package outline SOT763-1 (DHVQFN16)
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
14 / 17
12 Abbreviations
Table 10. Abbreviations
Acronym Description
CMOS Complementary Metal-Oxide Semiconductor
DUT Device Under Test
ESD ElectroStatic Discharge
HBM Human Body Model
MIL Military
MM Machine Model
TTL Transistor-Transistor Logic
13 Revision history
Table 11. Revision history
Document ID Release date Data sheet status Change notice Supersedes
74HC_HCT138_Q100 v.3 20180326 Product data sheet - 74HC_HCT138_Q100 v.2
Modifications: •The format of this data sheet has been redesigned to comply with the identity guidelines of
Nexperia.
•Legal texts have been adapted to the new company name where appropriate.
74HC_HCT138_Q100 v.2 20150126 Product data sheet - 74HC_HCT138_Q100 v.1
Modifications: •Section 9: OFF-state output current removed because device has no 3-state outputs.
•Section 10: Power dissipation capacitance condition for 74HCT138 is corrected.
74HC_HCT138_Q100 v.1 20120716 Product data sheet - -
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
15 / 17
14 Legal information
14.1 Data sheet status
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product
development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple
devices. The latest product status information is available on the Internet at URL http://www.nexperia.com.
14.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the
relevant full data sheet, which is available on request via the local Nexperia
sales office. In case of any inconsistency or conflict with the short data sheet,
the full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
14.3 Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia. In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation -
lost profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory. Notwithstanding any damages that
customer might incur for any reason whatsoever, Nexperia's aggregate and
cumulative liability towards customer for the products described herein shall
be limited in accordance with the Terms and conditions of commercial sale of
Nexperia.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification. Customers are responsible for the
design and operation of their applications and products using Nexperia
products, and Nexperia accepts no liability for any assistance with
applications or customer product design. It is customer’s sole responsibility
to determine whether the Nexperia product is suitable and fit for the
customer’s applications and products planned, as well as for the planned
application and use of customer’s third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks
associated with their applications and products. Nexperia does not accept
any liability related to any default, damage, costs or problem which is based
on any weakness or default in the customer’s applications or products, or
the application or use by customer’s third party customer(s). Customer is
responsible for doing all necessary testing for the customer’s applications
and products using Nexperia products in order to avoid a default of the
applications and the products or of the application or use by customer’s third
party customer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or
the grant, conveyance or implication of any license under any copyrights,
patents or other industrial or intellectual property rights.
Suitability for use in automotive applications — This Nexperia product
has been qualified for use in automotive applications. Unless otherwise
agreed in writing, the product is not designed, authorized or warranted to
be suitable for use in life support, life-critical or safety-critical systems or
equipment, nor in applications where failure or malfunction of an Nexperia
product can reasonably be expected to result in personal injury, death or
severe property or environmental damage. Nexperia and its suppliers accept
no liability for inclusion and/or use of Nexperia products in such equipment or
applications and therefore such inclusion and/or use is at the customer's own
risk.
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
74HC_HCT138_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 3 — 26 March 2018
16 / 17
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
14.4 Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
Nexperia 74HC138-Q100; 74HCT138-Q100
3-to-8 line decoder/demultiplexer; inverting
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section 'Legal information'.
© Nexperia B.V. 2018. All rights reserved.
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 26 March 2018
Document identifier: 74HC_HCT138_Q100
Contents
1 General description ............................................ 1
2 Features and benefits .........................................1
3 Ordering information .......................................... 2
4 Functional diagram ............................................. 2
5 Pinning information ............................................ 3
5.1 Pinning ............................................................... 3
5.2 Pin description ................................................... 3
6 Functional description ........................................4
7 Limiting values ....................................................4
8 Recommended operating conditions ................ 5
9 Static characteristics .......................................... 5
10 Dynamic characteristics .....................................7
10.1 Waveforms and test circuit ................................ 9
11 Package outline .................................................11
12 Abbreviations .................................................... 14
13 Revision history ................................................ 14
14 Legal information .............................................. 15