Crystal Oscillator (SPXO)
· Package size (7.0 mm × 5.0 mm × 1.3 mm)
· Fundamental mode SPXO
· Output: CMOS
· Reference weight Typ.143 mg X1G0055710041xx
[ 1 ] Product Number / Product Name / Marking
(1-1) Product Number / Ordering Code
X1G0055710041xx
Last 2 digits code(xx) defines Quantity.
The standard is "00", 1 000 pcs/Reel.
(1-2) Product Name / Model Name
SG-8018CA 30.000000 MHz TJHPA
[ 2 ] Operating Range
Min. Typ. Max.
VCC 1.62 -3.63 V-
GND 0 0 0 V -
Operating temperature range T_use -40 +25 +105 °C -
CMOS load condition L_CMOS - - 15 pF -
[ 3 ] Frequency Characteristics (Unless stated otherwise [ 2 ] Operating Range)
Min. Typ. Max.
Output frequency fo -30.000000 - MHz -
Frequency tolerance *1 f_tol -50 - +50
×10-6 T_use
*1 Frequency tolerance includes Initial frequency tolerance, Frequency / temperature characteristics, Frequency / voltage coefficient
Frequency / load coefficient and frequensy aging (+25 °C. 10 years)
[ 4 ] Electrical Characteristics (Unless stated otherwise [ 2 ] Operating Range)
Min. Typ. Max.
Start-up time t_str - - 3 ms t = 0 at 90 % Vcc
Current consumption
ICC -3.8 4.4 mA No load condition, Vcc = 3.3 V
Disable current I_dis - 2.9 3.5 mA OE = GND, Vcc = 3.3 V
VOH 90 % Vcc - - V
VOL - - 10 % Vcc V
Rise time tr - - 6 ns
20 % Vcc to 80 % Vcc Level,
L_CMOS = 15 pF, Vcc = 3.3 V
Fall time tf - - 6 ns
80 % Vcc to 20 % Vcc Level,
L_CMOS = 15 pF, Vcc = 3.3 V
Symmetry SYM 45 -55 %
70 % Vcc - - V OE terminal
- - 30 % Vcc V OE terminal
Output disable time (OE) tstp_oe - - 1
Output enable time (OE) tsta_oe - - 1
Phase jitter
tPJ - - 72.9 ps Offset freq.:12 kHz to 20 MHz, Vcc = 3.3 V
Peak to Peak jitter
tp-p - - 199.4 ps Clock cycle > 50 000, Vcc = 3.3 V
RMS jitter
tRMS - - 18.1 ps Clock cycle > 50 000, Vcc = 3.3 V
Cycle to Cycle jitter
tc-c - - 122.0 ps Clock cycle > 50 000, Vcc = 3.3 V
[ For other general specifications, please refer to the attached Full Data Sheet below ]
Parameter
Symbol
Specifications
Unit
Conditions
Parameter
Symbol
Specifications
Unit
Conditions
Supply voltage
Output voltage
Input voltage
Parameter
Symbol
Specifications
Unit
Conditions
1 / 41 Page
2020/11/6
Features
● Crystal oscillator (Programmable)
● Output frequency: 0.67 MHz to 170 MHz
(1 × 10-6 Step)
● Output: CMOS
● Supply voltage: 1.62 V to 3.63 V
● Frequency tolerance, Operating temperature:
±50 × 10-6 / -40 °C to +105 °C
* Including frequency aging (+25 °C, 10 years)
Description
While this series offer the same easy programmability of frequencies and other parameters as comparable earlier
SG-8002/SG-8003 series, they also have a wider operating temperature range, with a top-end limit of 105 °C.
In addition to a 2.5 × 2.0 mm package that will enable electronics manufacturers to save board space, the
oscillators will also be available in the following popular package sizes: 3.2 × 2.5 mm, 5.0 × 3.2 mm and
7.0 × 5.0 mm. The oscillator in the SG-8101 series have an approximately 66 % tighter frequency tolerance and
50 % lower current consumption than comparable products, and can be used under a wide range of
environmental conditions. This will also significantly contribute to performance, lower power requirements, fast
development cycles, and low-volume production.
Outline Drawing and Terminal Assignment
SG-8018CG
SG-8018CE
SG-8018CB
SG-8018CA
Terminal Assignment
* Please do not use the OE/ terminal in the open state.
Programmable Crystal Oscillator: SG-8018CG/SG-8018CE/SG-8018CB/SG-8018CA
SG-8018CG
(2.5 ×2.0 mm) SG-8018CE
(3.2 ×2.5 mm) SG-8018CB
(5.0 ×3.2 mm) SG-8018CA
(7.0 ×5.0 mm)
Pin # Connection
OE function Osc. Circuit Output
