DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D088 BFQ67 NPN 8 GHz wideband transistor Product specification Supersedes data of September 1995 1998 Aug 27 NXP Semiconductors Product specification NPN 8 GHz wideband transistor BFQ67 FEATURES DESCRIPTION High power gain Silicon NPN wideband transistor in a plastic SOT23 package. Low noise figure 3 alfpage High transition frequency Gold metallization ensures excellent reliability. APPLICATIONS Satellite TV tuners and RF portable communications equipment up to 2 GHz. PINNING PIN DESCRIPTION 1 base 2 emitter 3 collector 1 2 Top view MSB003 Marking code: V2p. Fig.1 SOT23. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT VCBO collector-base voltage open emitter 20 V VCEO collector-emitter voltage open base 10 V IC collector current (DC) 50 mA Ptot total power dissipation Ts 97 C; note 1 300 mW hFE DC current gain IC = 15 mA; VCE = 5 V 60 100 fT transition frequency IC = 15 mA; VCE = 8 V 8 GHz GUM maximum unilateral power gain IC = 15 mA; VCE = 8 V; f = 1 GHz 14 dB F noise figure IC = 5 mA; VCE = 8 V; f = 1 GHz 1.3 dB Note 1. Ts is the temperature at the soldering point of the collector tab. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCBO collector-base voltage open emitter 20 V VCEO collector-emitter voltage open base 10 V VEBO emitter-base voltage open collector 2.5 V IC collector current (DC) 50 mA Ptot total power dissipation 300 mW Tstg storage temperature range Ts 97 C; note 1 65 +150 C Tj junction temperature 175 C Note 1. Ts is the temperature at the soldering point of the collector tab. 1998 Aug 27 2 NXP Semiconductors Product specification NPN 8 GHz wideband transistor BFQ67 THERMAL CHARACTERISTICS SYMBOL Rth j-s PARAMETER CONDITIONS thermal resistance from junction to soldering point VALUE UNIT 260 K/W note 1 Note Ts is the temperature at the soldering point of the collector lead. 1. CHARACTERISTICS Tj = 25 C unless otherwise specified. SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT ICBO collector cut-off current IE = 0; VCB = 5 V 50 hFE DC current gain IC = 15 mA; VCE = 5 V 60 100 Cc collector capacitance IE = ie = 0; VCB = 8 V; f = 1 MHz 0.7 Ce emitter capacitance IC = ic = 0; VEB = 0.5 V; f = 1 MHz 1.3 pF Cre feedback capacitance IC = 0; VCB = 8 V; f = 1 MHz 0.5 pF fT transition frequency IC = 15 mA; VCE = 8 V 8 GHz GUM maximum unilateral power gain (note 1) IC = 15 mA; VCE = 8 V; Tamb = 25 C; f = 1 GHz 14 dB IC = 15 mA; VCE = 8 V; f = 2 GHz 8 dB s = opt; IC = 5 mA; VCE = 8 V; Tamb = 25 C; f = 1 GHz 1.3 dB s = opt; IC = 15 mA; VCE = 8 V; Tamb = 25 C; f = 1 GHz 1.7 dB s = opt; IC = 5 mA; VCE = 8 V; Tamb = 25 C; f = 2 GHz 2.2 dB IC = 5 mA; VCE = 8 V; Tamb = 25 C; f = 2 GHz; Zs = 60 2.5 dB s = opt; IC = 15 mA; VCE = 8 V; Tamb = 25 C; f = 2 GHz 2.7 dB IC = 15 mA; VCE = 8 V; Tamb = 25 C; f = 2 GHz; Zs = 60 3 dB F noise figure Note 2 1. GUM is the maximum unilateral power gain, assuming S12 is zero and G UM 1998 Aug 27 3 nA pF S 21 = 10 log ----------------------------------------------------------dB . 2 2 1 - S 11 1 - S 22 NXP Semiconductors Product specification NPN 8 GHz wideband transistor BFQ67 MRA614 400 MBB301 120 handbook, halfpage handbook, halfpage Ptot (mW) h FE 300 80 200 40 100 0 0 50 100 150 Ts (oC) 0 200 0 20 40 60 I C (mA) VCE = 5 V. Fig.3 DC current gain as a function of collector current, typical values. Fig.2 Power derating curve. MRA607 0.8 MBB303 10 handbook, halfpage handbook, halfpage fT (GHz) Cre (pF) 8 0.6 6 0.4 4 0.2 2 0 0 0 5 10 VCB (V) 15 0 30 40 VCE = 8 V; Tamb = 25 C; f = 2 GHz. Feedback capacitance as a function of collector-base voltage, typical values. 1998 Aug 27 20 I C (mA) IC = ic = 0; f = 1 MHz. Fig.4 10 Fig.5 4 Transition frequency as a function of collector current, typical values. NXP Semiconductors Product specification NPN 8 GHz wideband transistor BFQ67 MRA611 25 MRA610 50 handbook, halfpage handbook, halfpage gain (dB) gain (dB) 20 40 GUM MSG Gmax 15 30 GUM MSG 10 20 5 10 0 0 10 20 Gmax 0 10 30 IC (mA) 102 VCE = 8 V; f = 1 GHz. VCE = 8 V; IC = 5 mA. Fig.6 Fig.7 Gain as a function of collector current, typical values. 103 f (MHz) 104 Gain as a function of frequency, typical values. MRA608 MRA609 50 50 handbook, halfpage handbook, halfpage gain (dB) gain (dB) 40 40 GUM GUM 30 30 MSG MSG 20 20 Gmax 10 10 Gmax 0 10 102 103 f (MHz) 0 10 104 102 VCE = 8 V; IC = 15 mA. VCE = 8 V; IC = 30 mA. Fig.8 Fig.9 Gain as a function of frequency, typical values. 1998 Aug 27 5 103 f (MHz) 104 Gain as a function of frequency, typical values. NXP Semiconductors Product specification NPN 8 GHz wideband transistor BFQ67 MBB308 4 MRA613 5 handbook, halfpage handbook, halfpage F f = 2 GHz F (dB) (dB) 4 3 1 GHz 900 MHz 3 ZS = 60 2 optimum source 500 MHz 2 1 1 0 0 1 10 1 100 I C (mA) 10 102 IC (mA) VCE = 8 V. VCE = 6 V; f = 900 MHz. Fig.10 Minimum noise figure as a function of collector current, typical values. Fig.11 Noise figure as a function of collector current, typical values. MBB309 4 MRA612 5 handbook, halfpage handbook, halfpage F F (dB) (dB) 4 I C = 30 mA IC = 0.5 mA 3 15 mA 3 1 mA 5 mA 2 mA 2 2 1 1 0 10 2 10 3 f (MHz) 0 102 10 4 103 f (MHz) 104 VCE = 8 V. VCE = 1 V. Fig.12 Minimum noise figure as a function of frequency, typical values. Fig.13 Minimum noise figure as a function of frequency, typical values. 1998 Aug 27 6 NXP Semiconductors Product specification NPN 8 GHz wideband transistor BFQ67 1 handbook, full pagewidth 0.5 2 0.2 5 3 GHz 10 +j 0.2 0 1 2 5 10 -j 10 40 MHz 5 0.2 2 0.5 1 MBC968 VCE = 8 V; IC = 15 mA; Zo = 50 . Fig.14 Common emitter input reflection coefficient (S11), typical values. 90 handbook, full pagewidth 120 60 150 30 40 MHz 0.2 180 + 3 GHz 0.1 0 - 30 150 60 120 90 MBC967 VCE = 8 V; IC = 15 mA. Fig.15 Common emitter forward transmission coefficient (S21), typical values. 1998 Aug 27 7 NXP Semiconductors Product specification NPN 8 GHz wideband transistor BFQ67 90 handbook, full pagewidth 120 60 3 GHz 30 o 150 0.2 180 + 40 MHz 0.1 0 - 30 150 60 120 MBC966 90 VCE = 8 V; IC = 15 mA. Fig.16 Common emitter reverse transmission coefficient (S12), typical values. 1 handbook, full pagewidth 0.5 2 0.2 5 10 +j 0 0.2 0.5 1 2 5 -j 10 40 MHz 3 GHz 10 5 0.2 2 0.5 1 MBC965 VCE = 8 V; IC = 15 mA; Zo = 50 . Fig.17 Common emitter output reflection coefficient (S22), typical values. 1998 Aug 27 8 NXP Semiconductors Product specification NPN 8 GHz wideband transistor BFQ67 PACKAGE OUTLINE Plastic surface-mounted package; 3 leads SOT23 D E B A X HE v M A 3 Q A A1 1 2 e1 bp c w M B Lp e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 max. bp c D E e e1 HE Lp Q v w mm 1.1 0.9 0.1 0.48 0.38 0.15 0.09 3.0 2.8 1.4 1.2 1.9 0.95 2.5 2.1 0.45 0.15 0.55 0.45 0.2 0.1 OUTLINE VERSION SOT23 1998 Aug 27 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 04-11-04 06-03-16 TO-236AB 9 NXP Semiconductors Product specification NPN 8 GHz wideband transistor BFQ67 DATA SHEET STATUS DOCUMENT STATUS(1) PRODUCT STATUS(2) DEFINITION Objective data sheet Development This document contains data from the objective specification for product development. Preliminary data sheet Qualification This document contains data from the preliminary specification. Product data sheet Production This document contains the product specification. Notes 1. Please consult the most recently issued document before initiating or completing a design. 2. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. Right to make changes NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. DEFINITIONS Product specification The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. Suitability for use NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. DISCLAIMERS Limited warranty and liability Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Applications Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer's sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer's applications and products planned, as well as for the planned application and use of customer's third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors' aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. 1998 Aug 27 10 NXP Semiconductors Product specification NPN 8 GHz wideband transistor BFQ67 Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer's applications or products, or the application or use by customer's third party customer(s). Customer is responsible for doing all necessary testing for the customer's applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer's third party customer(s). NXP does not accept any liability in this respect. Quick reference data The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. Limiting values Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors' warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors' specifications such use shall be solely at customer's own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors' standard warranty and NXP Semiconductors' product specifications. Terms and conditions of commercial sale NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. 1998 Aug 27 11 NXP Semiconductors provides High Performance Mixed Signal and Standard Product solutions that leverage its leading RF, Analog, Power Management, Interface, Security and Digital Processing expertise Customer notification This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal definitions and disclaimers. No changes were made to the technical content, except for package outline drawings which were updated to the latest version. Contact information For additional information please visit: http://www.nxp.com For sales offices addresses send e-mail to: salesaddresses@nxp.com (c) NXP B.V. 2010 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R77/04/pp12 Date of release: 1998 Aug 27