Microprocessor Supervisory Circuit in 4-Lead SC70 ADM6384 Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAMS ADM6384 VCC RESET GENERATOR VREF MR RESET GND DEBOUNCE 05305-001 Precision power supply monitoring 31 reset threshold options: 1.58 V to 5.0 V Four reset timeouts: 1 ms, 20 ms, 140 ms, and 1120 ms Manual reset input Reset output stage Push-pull active-low Guaranteed reset output valid to VCC = 1 V Power supply glitch immunity Specified over the -40C to +125C temperature range 4-lead SC70 package Figure 1. APPLICATIONS Microprocessor systems Computers Controllers Intelligent instruments Portable equipment VCC VCC ADM6384 MICROPROCESSOR MR RESET RESET GND The ADM6384 is a supervisory circuit that monitors power supply voltage levels in microprocessor-based systems. A power-on reset signal is generated when the supply voltage rises to a preset threshold level. The debounced manual reset input of the ADM6384 can be used to initiate a reset by means of an external push button or logic signal. GND 05305-002 100k GENERAL DESCRIPTION Figure 2. The device is available in a choice of 31 reset threshold options, from 1.58 V to 5.0 V. The minimum reset timeout periods are 1 ms, 20 ms, 140 ms, and 1120 ms. The ADM6384 is available in a 4-lead SC70 package and typically consumes only 7 A, making it suitable for use in low power, portable applications. Rev. D Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 (c)2005-2016 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com ADM6384* PRODUCT PAGE QUICK LINKS Last Content Update: 02/23/2017 COMPARABLE PARTS DESIGN RESOURCES View a parametric search of comparable parts. * adm6384 Material Declaration * PCN-PDN Information DOCUMENTATION * Quality And Reliability Data Sheet * Symbols and Footprints * ADM6384: Microprocessor Supervisory Circuit in 4-Lead SC70 Data Sheet DISCUSSIONS REFERENCE MATERIALS View all adm6384 EngineerZone Discussions. Product Selection Guide SAMPLE AND BUY * Supervisory Devices Complementary Parts Guide for Altera FPGAs Visit the product page to see pricing options. * Supervisory Devices Complementary Parts Guide for Xilinx FPGAs TECHNICAL SUPPORT Solutions Bulletins & Brochures Submit a technical question or find your regional support number. * Voltage Monitoring Products Applications Guide DOCUMENT FEEDBACK Submit feedback for this data sheet. This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified. ADM6384 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Typical Performance Characteristics ..............................................7 Applications ....................................................................................... 1 Circuit Description............................................................................9 General Description ......................................................................... 1 Reset Output ..................................................................................9 Functional Block Diagrams ............................................................. 1 Manual Reset Input .......................................................................9 Revision History ............................................................................... 2 Applications Information .............................................................. 10 Specifications..................................................................................... 3 Negative-Going VCC Transients ................................................ 10 Absolute Maximum Ratings............................................................ 5 Ensuring Reset Valid to VCC = 0 V ........................................... 10 ESD Caution .................................................................................. 5 Outline Dimensions ....................................................................... 11 Pin Configuration and Function Descriptions ............................. 6 Ordering Guide .......................................................................... 11 REVISION HISTORY 6/2016--Rev. C to Rev. D Change to Table 3 ............................................................................. 6 Updated Outline Dimensions ....................................................... 11 4/2011--Rev. B to Rev. C Updated Outline Dimensions ....................................................... 11 Changes to Ordering Guide .......................................................... 11 7/2008--Rev. A to Rev. B Changes to Figure 5, Figure 8, and Figure 9.................................. 7 Changes to Figure 10 ........................................................................ 8 Changes to Figure 15 ...................................................................... 11 Changes to Ordering Guide .......................................................... 11 1/2007--Rev. 0 to Rev. A Updated Format .................................................................. Universal Changes to Specifications Table ...................................................... 3 Updated Outline Dimensions ....................................................... 11 Changes to Ordering Guide .......................................................... 11 7/2005--Revision 0: Initial Version Rev. D | Page 2 of 12 Data Sheet ADM6384 SPECIFICATIONS VCC = full operating range, TA = -40C to +125C, unless otherwise noted. Table 1. Parameter SUPPLY VCC Operating Voltage Range Supply Current RESET THRESHOLD VOLTAGE ADM6384x50x ADM6384x49x ADM6384x48x ADM6384x47x ADM6384x46x ADM6384x45x ADM6384x44x ADM6384x43x ADM6384x42x ADM6384x41x ADM6384x40x ADM6384x39x ADM6384x38x ADM6384x37x ADM6384x36x ADM6384x35x ADM6384x34x ADM6384x33x ADM6384x32x ADM6384x31x ADM6384x30x ADM6384x29x ADM6384x28x ADM6384x27x ADM6384x26x ADM6384x25x ADM6384x24x ADM6384x23x ADM6384x22x ADM6384x17x ADM6384x16x RESET THRESHOLD TEMPERATURE COEFFICIENT VCC to Reset Delay RESET THRESHOLD HYSTERESIS RESET TIMEOUT PERIOD ADM6384xxD1 ADM6384xxD2 ADM6384xxD3 ADM6384xxD4 Min Typ Max Unit Test Conditions/Comments 7 6 4 3 5.5 13 11 7 6 V A A A A VCC = 5.5 V, no load VCC = 3.6 V, no load VCC = 2.5 V, no load 1 VCC = 1.8 V, no load1 5.12 5.02 4.92 4.82 4.74 4.61 4.48 4.41 4.31 4.2 4.1 4.0 3.9 3.79 3.69 3.59 3.49 3.38 3.28 3.15 3.08 3.00 2.87 2.77 2.69 2.56 2.46 2.37 2.24 1.71 1.61 V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V ppm/C s 1 4.88 4.78 4.68 4.58 4.51 4.39 4.27 4.19 4.1 4.0 3.9 3.8 3.71 3.61 3.51 3.41 3.32 3.22 3.12 3.00 2.93 2.85 2.73 2.63 2.56 2.44 2.34 2.26 2.13 1.62 1.54 5.00 4.90 4.80 4.70 4.63 4.5 4.38 4.30 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.08 3.0 2.93 2.8 2.70 2.63 2.5 2.4 2.31 2.19 1.67 1.58 60 35 2 x VTH 1 20 140 1120 Rev. D | Page 3 of 12 mV 2 40 280 2240 ms ms ms ms VCC falling at 10 mV/s from VTH + 100 mV to VTH - 100 mV ADM6384 Parameter MANUAL RESET INPUT MR Input Threshold VIL VIH MR Input Pulse Width MR Glitch Rejection MR Pull-Up Resistance MR to Reset Delay Data Sheet Min Typ 1 Unit Test Conditions/Comments 0.3 x VCC 0.8 V V V V s ns kV ns VCC < 4 V VCC > 4 V VCC < 4 V VCC > 4 V V V V V V VCC 1.0 V, ISINK = 80 A VCC 2.5 V, ISINK = 1.2 mA VCC 4.5 V, ISINK = 3.2 mA VCC 2.5 V, ISOURCE = 500 A VCC 4.5 V, I SOURCE = 800 A 0.7 x VCC 2.4 1 100 63 200 32 RESET OUTPUT VOLTAGE VOL VOH Max 100 0.3 0.3 0.4 0.8 x VCC 0.8 x VCC TA = 25C only. Rev. D | Page 4 of 12 Data Sheet ADM6384 ABSOLUTE MAXIMUM RATINGS TA = 25C, unless otherwise noted. Table 2. Parameter VCC RESET Output Current (RESET) Operating Temperature Range Storage Temperature Range JA Thermal Impedance, SC70 Soldering Temperature Sn/Pb Pb-Free Rating -0.3 V to +6 V -0.3 V to +6 V 20 mA -40C to +125C -65C to +150C 331C/W Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. ESD CAUTION 240C, 30 sec 260C, 40 sec Rev. D | Page 5 of 12 ADM6384 Data Sheet PIN CONFIGURATION AND FUNCTION DESCRIPTIONS GND 1 ADM6384 4 VCC 3 MR RESET 05305-003 TOP VIEW (Not to Scale) 2 Figure 3. Pin Configuration Table 3. Pin Function Descriptions Pin No. 1 2 Mnemonic GND RESET 3 MR 4 VCC Description Ground. Active-Low Reset Output. This is an active-low output that is asserted whenever VCC is below the reset threshold (VTH). It features a push-pull output stage. Manual Reset Input. This is an active-low input that, when forced low for at least 1 s, generates a reset. It features a 52 k internal pull-up. Power Supply Voltage Being Monitored. Rev. D | Page 6 of 12 Data Sheet ADM6384 TYPICAL PERFORMANCE CHARACTERISTICS 10.0 1.05 9.5 1.04 VCC = 5V 8.0 ICC (A) 7.5 7.0 6.5 VCC = 3.3V 6.0 5.5 5.0 4.5 VCC = 1.5V 4.0 -20 0 20 40 60 TEMPERATURE (C) 80 100 120 1.02 1.01 1.00 0.99 0.98 0.97 0.96 0.95 -40 05305-004 3.5 -40 1.03 Figure 4. Supply Current vs. Temperature -20 0 60 20 40 TEMPERATURE (C) 80 100 05305-007 8.5 NORMALIZED RESET THRESHOLD (V) 9.0 120 Figure 7. Normalized Reset Threshold vs. Temperature 0.20 1.20 VCC = 2.9V 0.15 1.10 VOL (V) 1.05 1.00 0.10 0.95 0.05 0.90 0.85 0 20 40 60 TEMPERATURE (C) 80 100 120 0 0 Figure 5. Normalized Reset Timeout Period vs. Temperature 1 2 3 4 ISINK (mA) 5 6 7 05305-008 -20 1.0 05305-009 0.80 -40 05305-005 NORMALIZED RESET TIMEOUT (ms) 1.15 Figure 8. Output Voltage Low vs. ISINK 2.92 100 VCC = 2.9V 2.90 80 70 2.88 VOH (V) 60 50 2.86 40 30 2.84 20 10 2.82 0 -40 -20 0 20 40 60 TEMPERATURE (C) 80 100 120 05305-006 VCC TO RESET OUTPUT DELAY (s) 90 0 0.2 0.4 0.6 ISOURCE (mA) 0.8 Figure 9. Output Voltage High vs. ISOURCE Figure 6. VCC to Reset Output Delay vs. Temperature Rev. D | Page 7 of 12 ADM6384 RESET OCCURS ABOVE CURVE 340 120 100 VTH = 4.63V 80 60 40 20 VTH = 2.93V 0 10 100 OVERDRIVE VOD (mV) 1000 320 300 280 240 220 200 180 Rev. D | Page 8 of 12 VCC = 5V 160 140 120 100 -40 Figure 10. Maximum VCC Transient Duration vs. Reset Threshold Overdrive VCC = 3.3V 260 -20 0 20 40 60 TEMPERATURE (C) 80 100 120 Figure 11. Manual Reset Minimum Pulse Width vs. Temperature 05305-011 MANUAL RESET TO RESET DELAY (ns) 140 05305-010 MAXIMUM VCC TRANSIENT DURATION (s) 160 Data Sheet Data Sheet ADM6384 CIRCUIT DESCRIPTION RESET OUTPUT The ADM6384 features an active-low, push-pull reset output. The reset signal is guaranteed to be logic low for VCC down to 1 V. The reset output is asserted when VCC is below the reset threshold (VTH) or when MR is driven low. Reset remains asserted for the duration of the reset active timeout period (tRP) after VCC rises above the reset threshold or after MR transitions from low to high. Figure 12 illustrates the behavior of the reset outputs. VCC VCC VTH VTH 1V 0V VCC RESET tRP 0V tRD 05305-012 The ADM6384 provides microprocessor supply voltage supervision by controlling the microprocessor reset input. Code execution errors are avoided during power-up, power-down, and brownout conditions by asserting a reset signal when the supply voltage is below a preset threshold. In addition, the ADM6384 allows supply voltage stabilization with a fixed timeout before the reset deasserts after the supply voltage rises above the threshold. If the user detects a problem with the system operation, a manual reset input is available to reset the microprocessor by means of an external push-button, for example. Figure 12. Reset Timing Diagram MANUAL RESET INPUT The ADM6384 features a manual reset input (MR) that, when driven low, asserts the reset output. When MR transitions from low to high, reset remains asserted for the duration of the reset active timeout period before deasserting. The MR input has a 52 k internal pull-up so that the input is always high when unconnected. An external push-button switch can be connected between MR and ground so that the user can generate a reset. Debounce circuitry for this purpose is integrated on-chip. Noise immunity is provided on the MR input, and fast, negative-going transients of up to 100 ns (typical) are ignored. A 0.1 F capacitor between MR and ground provides additional noise immunity. Rev. D | Page 9 of 12 ADM6384 Data Sheet APPLICATIONS INFORMATION NEGATIVE-GOING VCC TRANSIENTS ENSURING RESET VALID TO VCC = 0 V To avoid unnecessary resets caused by fast power supply transients, the ADM6384 is equipped with glitch rejection circuitry. The typical performance characteristic shown in Figure 10 plots VCC transient duration vs. the transient magnitude. The curves show combinations of transient magnitude and duration for which a reset is not generated for 4.63 V and 2.93 V reset threshold devices. For example, with the 2.93 V threshold, a transient that goes 100 mV below the threshold and lasts 8 s typically does not cause a reset, but if the transient is any greater in magnitude or duration, a reset is generated. An optional 0.1 F bypass capacitor mounted close to VCC provides additional glitch rejection. Both active-low and active-high reset outputs are guaranteed to be valid for VCC as low as 1 V. However, by using an external resistor with push-pull configured reset outputs, valid outputs for VCC as low as 0 V are possible. For an active-low reset output, a resistor connected between RESET and ground pulls the output low when it is unable to sink current. Use a large resistance such as 100 k to avoid overloading the reset output when VCC is above 1 V. VCC ADM6384 RESET 05305-013 100k GND Figure 13. Ensuring Reset Valid to VCC = 0 V Rev. D | Page 10 of 12 Data Sheet ADM6384 OUTLINE DIMENSIONS 2.20 1.80 0.65 0.65 BSC BSC 1.35 1.15 4 1 3 2.40 1.80 2 PIN 1 INDICATOR 0.50 BSC 0.30 0.15 *0.70 0.50 SEATING PLANE 0.18 0.10 0.30 0.10 *PACKAGE OUTLINE CORRESPONDS IN FULL TO EIAJ SC82 EXCEPT FOR WIDTH OF PIN 2 AS SHOWN. 03-04-2014-B 0.10 MAX COPLANARITY 0.10 0.40 0.10 1.10 0.80 1.00 0.80 Figure 14. 4-Lead Thin Shrink Small Outline Transistor Package [SC70] (KS-4) Dimensions shown in millimeters ADM6384YKS x D x x -RL7 GENERIC NUMBER ORDERING QUANTITY RL7: 3,000 PIECE REEL R7: 3,000 PIECE REEL RoHS COMPLIANT TEMPERATURE RANGE Y: -40C TO +125C RESET TIMEOUT PERIOD 1: 1ms (MIN) 2: 20ms (MIN) 3: 140ms (MIN) 4: 1120ms (MIN) RESET THRESHOLD NUMBER (16 TO 50) 05305-014 Z: RoHS COMPLIANT PACKAGE CODE KS: 4-LEAD SC70 Figure 15. Ordering Code Structure ORDERING GUIDE Standard Models 1, 2 ADM6384YKS23D3Z-R7 ADM6384YKS26D3Z-R7 ADM6384YKS29D1Z-R7 ADM6384YKS29D3Z-R7 ADM6384YKS31D1Z-R7 ADM6384YKS31D2Z-R7 ADM6384YKS34D2Z-R7 ADM6384YKS39D2Z-R7 ADM6384YKS45D3Z-R7 ADM6384YKS46D2Z-R7 1 2 Reset Threshold (V) 2.31 2.63 2.93 2.93 3.08 3.08 3.4 3.9 4.5 4.63 Reset Timeout (ms) 140 140 1 140 1 20 20 20 140 20 Temperature Range -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C Package Description 4-Lead SC70 4-Lead SC70 4-Lead SC70 4-Lead SC70 4-Lead SC70 4-Lead SC70 4-Lead SC70 4-Lead SC70 4-Lead SC70 4-Lead SC70 Package Option KS-4 KS-4 KS-4 KS-4 KS-4 KS-4 KS-4 KS-4 KS-4 KS-4 Ordering Quantity 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 Branding N0R N0R N0R N0R N0R N0R N0R N0R N0R N0R If ordering nonstandard models, complete the ordering code shown in Figure 15 by inserting reset timeout and reset threshold suffixes. Contact sales for availability of nonstandard models. Z = RoHS Compliant Part. Rev. D | Page 11 of 12 ADM6384 Data Sheet NOTES (c)2005-2016 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D05305-0-6/16(D) Rev. D | Page 12 of 12