FHOswScOors Fiber Optic Plastic Optical Fiber Interconnect DEscaipTion/ APPLICATION Ss S = = Nay C Thomas & Betis Optic PCB Data Link combines the benefits of fiber optic signaling with the convenience of PCB DATA L. NK plug-in PGB electrical termination. It is designed tc permit fast, reliable self-termination of single channel plastic optical fiber... without the need fer special tools, adhesives, or polishing. The Data Link consists of a PCB- mounted receptacle with an integral emitter or detector optedevice; and a mating, self-terminating cable connector plug featuring a quick- release tab. The receptacle Is wave solderable and color-coded for easy transmitter and receiver identification. It mates with the polarized cable connector plug with positive detents to achieve a high performance, cost effective link. Thomas & Betts PGB data link is ideal . . . i. where EMI/RFI immunity, ground loop Self-ter minating optical-electr onic interface isolation, extended distance needs, and spark-free data transmission are requlred. Design CoNSiOe RATIONS Ordering Information PCB Mounted Receptacle * Compatible with 1mm diameter, simplex plastic optical fiber with an OD of 2.25mm. * Terminates fiber optic cable in 92915 ter (red), 1O0Mbp 92915-R-HS-10 Receiver (black}, 10Mbps . . 92915-T-DD Transmitter (red), 3Mbps seconds without tools, adhesives, 92915-R-HS-4 Receiver (black), 3Mbps or polishing. 92910 Plug (black) 2.25mm POF * Suitable for terminating data 92910-R Plug (red) 2.25mm POF transmission links at signal rates of 92910-C5 Plug (black) 5mm POF 3Mb/s (NRZ). 92910-R-C5 Plug (red) 5mm POF * Opto-electrical interface includes a TTL compatible receiver and LED driver. * Polarized connector plug provides positive, snap retention with quick- release tab. * Optional color-coded (red) cable connector plug permits easy identification of transmission or receiver end of cable assembly. Thomas & Betis Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 472FHOswScOors Fiber Optic Plastic Optical Fiber Interconnect Fisee Servic POS Sara Lak Speciricarions Dimensional Specifications 9.85 (028) MAX, > SS TRANSMIT 14.5 (570) 1 7 BH oH- : 6 as | RECEIVE ; Ir (3) ( _. L (866) \ | . 0.68 ea La (26) MAX. TYP 1.6 (300) DIMENSIGNS ARE SHOWN IN mmi{inches) Assignment BOTTOM VIEW Proper aperation of this praduct Pin Tequires observance of certain design considerations. Reter to T&B publication TRANSMIT RECEWE No. OFD-ANtO0. Performance RECEPTACLE GND RECEPTACLE specication and application n }+o TTL QUIPLT [+ GND c f Veg +5 4I camnone ofa ANODE oO Le0 irs) PLASTIC FISER GNO NOTE: * CONNECT a0.1uF BY-PASS CAPACITOR (VOLTAGE RATING 25V OR MORE). Using pliers as shown, press down on the sn po fiber clamp until it is fully bottomed in the The connector plug is packaged ready Insert the fiber in the connector as shown. i ination | to.use. No fiber preparation is necessary. The fiber should protrude through the Discard unused ter [sthen complete housing by a minimum of 1 cm. 1. ez 2. Insert the polarized positive-snap retention To remove, depress the quick-release tab plug into the color-coded receptacle. and slide the plug cut of the receptacle. Thomas & Betis Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 473FHOswScOors Fiber Optic PescnpTion/! APPLICATION Thomas & Betts Plastic Fiber Optic Gable consists of a PMMA core, polymer clad with a durable black polyethylene jacket. It is available in 100 and 500 foot lengths in both simplex and duplex zipcord styles.* The cable is compatible with a complete line of Thomas & Betts connector products which include: the Thomas & Betts PCB Data Link System, Active duplex Connector, Bulkhead Connector, RS-232-C Modem and Splice Kit. Design CoNsINE RATIONS * Low-profile, lightweight. Perfect for sub 130 meter applications. * No polishing. * Compatible with Thomas & Betts self-termination technology. * Low bend radius (approximately 1- inch}. * High strain relief. * Wide temperature range (-35C to +80"). + Low-cost. * No installation tocling necessary. * {1mm plastic fiber. 93902:500:: OBB02.400.2:255 Plastic Optical Fiber Interconnect PLASTIC FISER OPTIC CABLE Low profile, lightweight, plastic fi fiber optic cable 93902-100 100" Simplex Optical Gable =500" Simplex Optical: Gable: BS BS 400" oe Plastic Fibar Cable 93802-500 500" Roll Duplex Plastic Fiber Gable Thomas & Betis Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 474FHOswScOors Fiber Optic Tooling DescnpyTion/ APPUCATION e \ : YE RS AL =| = = ~ OPT c The Universal Fiber Optic Cleaving Tool eliminates time consuming GUEAVING TOOL polishing of optical fibers. The tool delivers consistent high quality cleaves by field personnel outside the laboratory environment. Human engineered, the palm-sized cleaving tool incorporates a simple two-stroke design. This eliminates subjective operator skills while producing the end angle required for single-mode splicing without chips, lips or hackle. The universal cleaving tool is designed for single and multi-mode fiber with nominal diameters (.D.} of 125 micron without operator adjustments of any kind. Tool package includes bench mounting clamp, hand carrying strap and protective case. DESIGN CHARACTERISTICS + Single-mode precision High Quality in-field cleaves first time...every time + Fast, in-field terminations * Eliminates polishing * No special training required * Eliminates tedious microscopic fiber inspection * Delivers over 3000 reliable cleaves For tool repair and service, call Tool Service Group at (609) 234-5211. 400% Typical Exp ANGLr DISTRIBUTION 75% END ANGLE SPECIFICATION: Maximum end angle: 3 Typical end 50% angle: see graph 85.5% FIBER TEST SAMPLE: 25% Corning Glass Works, AT&T, and 12% 25% Northern Telecom. (Single-mode). Pd 2 z Thomas & Betis Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 475FHOswScOors Fiber Optic UINIVERSAL CLEAVING TOCL SPECIFICATIONS Operating Procedure 1. FIBER SIZE: Ensure that the fiber to be broken is a glass fiber of nominal diameter: 125 jzm* and buffer 0.0. is: 250 zm to 1.5mm (fiber diameters other than 125 um can be accommodated consult factory); FIBER PREPARATION: Prepare fiber for cleaving by removing 50mm (2) of buffer. 500 ram ra) FIBER BUFFER 3. FISER BREAKING: Insert fiber into adapter until it stops (ftber should be protruding out of tool), then press clamp down inte jock position. Accessories 2. INDICATOR SCALE ADAPTER DIAL 4, Slide safety latch down. While fatch is in down position, squeeze lever until it stops, then release For convenience of operation this toal cornes complete with the following accessories. 1. TABLE MOUNTING CLAMP Insert clamp into hole on tool and maunt on table. an ee TOOL TABLE MOUNTING y . CLAN? 3. PAOTECTIVE CASE Store tool and adapter in case provided. 2. HAND CARRYING STRAP Mount carrying strap clasp to pin at base of tool. Tooling ADAPTER ADJUSTMENT: Adapter has a cleave jength scale from 3 to 20mm (each division on seale is 1mm}. Set indicator to desired cleave length by turning dial. CLEAVE [7 LENGTH ~| BUFFER CLEAVED _ END 3. Firmly squeeze fiber-breaking clamp and while Squeezing slide clamp slightly away from tool. FIBER BREAKING to Remove fiber stub fram fiber-breaking clamp and safely discard, then unlock lamp on adapter and remove cleaved iber. Ordering Information Universal Gleaving Tool Breaking Clamp Replacement 8 { 92208-TB \ ra ! ene 92208BC STRAP Thomas & Betis Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 476