Yageo corporation ELECTROLYTIC CAPACITORS Surface Mount Aluminum Electrolytic CA [ For General ] ELECTRICAL CHARACTERISTICS Operation Temperature Range -40 to +85C Rated Voltage Range 4 to 100VDC Rated Capacitance Range 0.1 ~ 1000F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current (Max. 20C) I 0.01CV (A) or 3A whichever is greater. (After 2 Minutes Application of DC Rated Voltage at 20C) feature I = Leakage Current (A), C = Rated Capacitance (F), V = Rated Voltage (V) For General Purpose Series with 85C 2000 Hours Low Temperature Stability Suitable for AV (TV, Video, Audio) Monitor / Computer, Home appliance, OA / HA / Communication marking Impedance Ratio at 120Hz (Max.) W V (V) 4 6.3 10 16 25 35 50 63 100 Z (-25C) 7 4 3 2 2 2 2 2 3 Z (-40C) 15 8 6 4 4 3 3 3 2 After the rated voltage has been applied at 85C for 2000 hours, the Endurance capacitors shall meet the following requirements. 1 0 (a) Capacitance Change: Within 20% of the Initial Value (b) Dissipation Factor: Not Exceeding 200% of Specified Value (c) Leakage Current: Not Exceeding the Specified Value Capacitance (F) 16G Rated Voltage (VDC) 793 Date Code Shelf Life After having been placed at 85C without voltage applied for 1000 hours, the capacitors shall meet the same requirements as Endurance. dimensions Unit: mm SIZE CODE Do L A H I W P K B 4.0 5.4 4.3 5.5 Max. 1.8 0.65 0.1 1.00.2 0.35 --- 0.20 C 5.0 5.4 5.3 6.5 Max. 2.2 0.65 0.1 1.50.2 0.35 --- 0.20 D 6.3 5.4 6.6 7.8 Max. 2.6 0.65 0.1 1.80.2 0.35 --- 0.20 E 8.0 6.5 8.3 9.5 Max. 3.4 0.65 0.1 2.20.2 0.35 --- 0.20 F 8.0 10.5 8.3 10.0 Max. 3.4 0.90 0.2 3.10.2 0.70 0.20 G 10.0 10.5 10.3 12.0 Max. 3.5 0.90 0.2 4.60.2 0.70 0.20 H 6.3 7.7 6.6 7.8 Max. 0.65 0.1 1.80.2 0.35 --- 0.20 K 0.3Max. H (I) (P) oD 0.5 (I) A 0.2 W ( ) Reference Size L 0.3 D o8 = L 0.5 2.6 + 0.15 + 0.15 + 0.15 + 0.15 + 0.15 125 CASE SIZE & PERMISSIBLE RIPPLE CURRENT OF STANDARD PRODUCTS D x L: mm CAP. RATED VOLTAGE W V (SURGE VOLTAGE W V) (F) 4 (5) SIZE 6.3 (8) 10 (13) 16 (20) RIPPLE DISSIPATION SIZE RIPPLE DISSIPATION SIZE RIPPLE DISSIPATION SIZE RIPPLE DISSIPATION CURRENT FACTOR CURRENT FACTOR CURRENT FACTOR CURRENT FACTOR 4.7 10 22 33 47 100 220 330 470 1000 1500 4 x 5.4 4 x 5.4 4 x 5.4 5 x 5.4 19 26 34 61 6.3 x 5.4 82 0.35 0.35 0.35 0.35 0.35 4 x 5.4 5 x 5.4 20 22 0.26 0.26 4 x 5.4 20 0.16 4 x 5.4 14 0.30 4 x 5.4 28 0.16 4 x 5.4 28 0.30 4 x 5.4 27 0.26 5 x 5.4 39 0.16 4 x 5.4 29 0.30 5 x 5.4 45 0.26 5 x 5.4 43 0.20 6.3 x 5.4 66 0.16 4 x 5.4 38 0.26 5 x 5.4 43 0.30 6.3 x 5.4 70 0.16 5 x 5.4 46 0.26 6.3 x 5.4 46 0.30 6.3 x 7.7 75 0.18 6.3 x 5.4 71 0.26 5 x 5.4 60 0.30 6.3 x 5.4 70 0.20 6.3 x 5.4 70 0.26 6.3 x 7.7 85 0.20 8 x 6.5 0.20 86 6.3 x 5.4 190 0.26 6.3 x 7.7 105 0.26 6.3 x 7.7 105 0.20 6.3 x 7.7 235 0.35 8 x 6.5 250 0.26 8 x 10.5 280 0.20 8 x 6.5 250 0.35 6.3 x 7.7 280 0.35 8 x 10.5 330 0.26 8 x 10.5 316 0.20 8 x 6.5 300 0.35 10 x 10.5 380 0.20 8 x 10.5 340 0.35 8 x 10.5 380 0.35 8 x 10.5 580 0.35 10 x 10.5 700 0.35 10 x 10.5 1000 0.35 Note: 1. Ripple Current: (mA/rms) 85C, 120Hz 2. Dissipation Factor: 20C, 120Hz 8 x 10.5 330 0.26 8 x 10.5 350 0.20 10 x 10.5 400 0.26 10 x 10.5 420 0.20 10 x 10.5 580 0.26 126 CASE SIZE & PERMISSIBLE RIPPLE CURRENT OF STANDARD PRODUCTS CAP. (F) D x L: mm RATED VOLTAGE W V (SURGE VOLTAGE W V) 25 (32) SIZE RIPPLE CURRENT 35 (44) DISSIPATION SIZE FACTOR RIPPLE CURRENT 50 (63) DISSIPATION SIZE FACTOR RIPPLE CURRENT DISSIPATION FACTOR 0.10 4 x 5.4 1 0.12 0.22 4 x 5.4 2 0.12 0.33 4 x 5.4 3 0.12 0.47 4 x 5.4 5 0.12 1.0 4 x 5.4 10 0.12 2.2 4 x 5.4 8 0.12 4 x 5.4 16 0.12 3.3 4 x 5.4 10 0.12 4 x 5.4 16 0.12 4.7 4 x 5.4 22 0.14 4 x 5.4 22 0.12 5 x 5.4 23 0.12 10 4 x 5.4 24 0.20 4 x 5.4 24 0.16 5 x 5.4 28 0.12 5 x 5.4 28 0.14 5 x 5.4 30 0.12 6.3 x 5.4 35 0.12 5 x 5.4 45 0.14 5 x 5.4 49 0.23 6.3 x 5.4 70 0.12 6.3 x 5.4 55 0.14 6.3 x 5.4 60 0.12 6.3 x 7.7 90 0.12 8 x 6.5 110 0.12 22 33 47 100 220 330 470 5 x 5.4 53 0.14 6.3 x 5.4 100 0.14 6.3 x 7.7 90 0.12 6.3 x 5.4 65 0.14 8 x 6.5 130 0.14 8 x 10.5 120 0.12 6.3 x 5.4 70 0.20 6.3 x 7.7 150 0.14 6.3 x 7.7 63 0.12 8 x 6.5 96 0.16 8 x 6.5 165 0.14 8 x 10.5 100 0.12 10 x 10.5 130 0.12 6.3 x 7.7 115 0.16 6.3 x 7.7 140 0.14 8 x 10.5 160 0.12 8 x 6.5 140 0.16 8 x 6.5 170 0.14 10 x 10.5 190 0.12 8 x 10.5 180 0.16 10 x 10.5 210 0.14 8 x 6.5 210 0.16 8 x 10.5 250 0.14 10 x 10.5 310 0.12 8 x 10.5 260 0.16 10 x 10.5 310 0.14 10 x 10.5 310 0.16 8 x 10.5 350 0.16 10 x 10.5 400 0.14 10 x 10.5 430 0.16 10 x 10.5 480 0.16 Note: 1. Ripple Current: (mA/rms) 85C, 120Hz 2. Dissipation Factor: 20C, 120Hz 127 CASE SIZE & PERMISSIBLE RIPPLE CURRENT OF STANDARD PRODUCTS CAP. (F) D x L: mm RATED VOLTAGE W V (SURGE VOLTAGE W V) 63 (79) SIZE RIPPLE CURRENT DISSIPATION FACTOR 3.3 100 (125) SIZE RIPPLE CURRENT DISSIPATION FACTOR 8 x 10.5 30 0.18 4.7 6.3 x 5.4 20 0.18 8 x 10.5 50 0.18 10 6.3 x 5.4 20 0.18 8 x 10.5 55 0.18 22 8 x 10.5 30 0.18 10 x 10.5 60 0.18 33 8 x 10.5 30 0.18 10 x 10.5 65 0.18 47 8 x 10.5 30 0.18 100 10 x 10.5 60 0.18 Note: 1. Ripple Current: (mA/rms) 85C, 120Hz 2. Dissipation Factor: 20C, 120Hz