DC/AC MicroProbe Model K110 (pdf) Rev. 04 02/08
Technical Assistance (800) 343-1391 www.aemc.com
1
of 4
DC/AC MicroProbe
Model K110
The Model K110 has exceptional AC/
DC current measurement capabilities.
Very small and compact, this micro-
probe is designed for accurate mea-
surement of very low currents with
50µAd c sensitivity.
Its very small size and “clip” shape
make it ideal for probing and measuring
in tight wiring areas such as circuit
boards, 4 to 20mA process loops or
automotive electronic circuitry. Model
K110 is an excellent companion to all
DMMs and instruments that will bene-
fit from the probe’s high sensitivity,
dynamic range and waveform displaying
characteristics.
The Model K110 provides higher
sensitivity and better accuracy with
an output of 10mV/mA. It provides
AC + DC output signal proportional to
the total current under test, without
the need of probe ranging or signal
filtering. True RMS measurements
with total AC + DC components are
possible.
Features
• Measures extremely low level
DC from 100µA
• Outputs signal proportional to total
current (AC + DC)
• Low noise
• Ultra-compact size and non-contact
clamp-on convenience
• Simple plug-in operation
• Designed for use with DMMs
and oscilloscopes
• Accurate display of wave forms
• No range or mode (AD/DC)
switching required
• Extended battery life
• Red LED indicates momentary or
continuous overload
• Green LED indicates power and
battery condition
• Double Insulation
• CE Mark
Applications
• Industrial process controls
(4 to 20mA current loops)
• Electronic circuit design, testing
and repair
• Automobile wiring and engine
control systems
• Avionics systems maintenance
and repair
• Shipboard maintenance and repair
• Fault and signal location in complex
networks
• Ground and leakage current
measurement
• Pre-deployment testing of
power-conscious equipment
DC/AC MicroProbe Model K110 (pdf) Rev. 04 02/08
Technical Assistance (800) 343-1391 www.aemc.com
2
of 4
Specifications
MODELS K110
ELECTRICAL
Nominal Range 0 to 300mArms/0 to ±450mAd c
Measurement Range 0 to ±450mA
Output Signal 10mV/mA
Accuracy (450mA Range)
AC ±0.8% of Reading ± 200µA
DC ±0.5% of Reading ± 150µA
Overload Red LED indicates momentary or continuous overload
Frequency Range DC to 1.5kHz (@ -3dB sine)
Load Impedance 200Ω
Working/Common
Mode Voltage 300V, EN 61010-1, Cat. II
Battery 9V Alkaline, NEDA 1604, 6LR61 or IEC 6 LF22
(Approx. 20 hours life)
Output Termination 4mm Safety Banana Plugs
MECHANICAL
Operating Temperature -14° to 131°F (-10° to 55°C)
Storage Temperature -40° to 176°F (-40° to 80°C)
Operating Relative
Humidity <95% @ ≤ 35°C, 75% @ 55°C
Zero Adjustment ±25mA approx. by 10 turn knob at base of case
Maximum Conductor Size 3/16", 0.180" (4.5mm)
Dimensions Probe: 4.4 x 0.6 x 1.0" (111 x 15 x 25mm); Electronic Module: 4.9 x 2.5 x 1.1" (124 x 64 x 28mm)
Weight 9 oz (250g)
SAFETY
Electrical EN 61010-2-32
Double Insulation Yes
CE Mark Yes
Note: Reference conditions: 23°C ±3°C, 20 to 75%RH, battery voltage 9V ±0.1V; earth’s magnetic field <40A/m; absence of AC fields;
input impedance of display device ≥ 1MΩ/100pF; DC or sinusoidal AC current 45 to 65Hz.
DC/AC MicroProbe Model K110 (pdf) Rev. 04 02/08
Technical Assistance (800) 343-1391 www.aemc.com
3
of 4
ORDERING INFORMATION CATALOG NO.
AC/DC Microprobe Model K110 (Jack – 10mV/mA – 450mA max) ............................... Cat. #2111.73
Includes a 9V battery and user manual
•
•
2.5"
(124mm)
1.0"
(25mm)
4.4"
(111mm)
4.9"
(124mm)
Ø=0.180" max.
(4.5mm)
Shrouded
Banana Plugs:
Two 4mm safety
banana plugs;
standard 3/4"
(19mm) spacing
DC/AC MicroProbe Model K110 (pdf) Rev. 04 02/08
Technical Assistance (800) 343-1391 www.aemc.com
4
of 4
Contact Us
United States & Canada:
Chauvin Arnoux®, Inc.
d.b.a. AEMC® Instruments
200 Foxborough Blvd.
Foxborough, MA 02035 USA
(508) 698-2115 • Fax (508) 698-2118
www.aemc.com
Customer Support – for placing an order, obtaining price & delivery:
customerservice@aemc.com
Sales Department – for general sales information:
sales@aemc.com
Repair and Calibration Service – for information on repair & calibration, obtaining a user manual:
repair@aemc.com
Technical and Product Application Support – for technical and application support:
techinfo@aemc.com
Webmaster – for information regarding www.aemc.com:
webmaster@aemc.com
South America, Central America, Mexico, Caribbean, Australia & New Zealand:
Chauvin Arnoux®, Inc.
d.b.a. AEMC® Instruments
15 Faraday Drive
Dover, NH 03820 USA
(978) 526-7667 • Fax (978) 526-7605
export@aemc.com
www.aemc.com
All other countries:
Chauvin Arnoux SCA
190, rue Championnet
75876 Paris Cedex 18, France
33 1 44 85 45 28 • Fax 33 1 46 27 73 89
info@chauvin-arnoux.com
www.chauvin-arnoux.com
