TL/F/6373
54LS74/DM54LS74A/DM74LS74A Dual Positive-Edge-Triggered
D Flip-Flops with Preset, Clear and Complementary Outputs
June 1989
54LS74/DM54LS74A/DM74LS74A
Dual Positive-Edge-Triggered D Flip-Flops
with Preset, Clear and Complementary Outputs
General Description
This device contains two independent positive-edge-trig-
gered D flip-flops with complementary outputs. The informa-
tion on the D input is accepted by the flip-flops on the posi-
tive going edge of the clock pulse. The triggering occurs at a
voltage level and is not directly related to the transition time
of the rising edge of the clock. The data on the D input may
be changed while the clock is low or high without affecting
the outputs as long as the data setup and hold times are not
violated. A low logic level on the preset or clear inputs will
set or reset the outputs regardless of the logic levels of the
other inputs.
Features
YAlternate military/aerospace device (54LS74) is avail-
able. Contact a National Semiconductor Sales Office/
Distributor for specifications.
Connection Diagram
Dual-In-Line Package
TL/F/63731
Order Number 54LS74DMQB, 54LS74FMQB, 54LS74LMQB,
DM54LS74AJ, DM54LS74AW, DM74LS74AM or DM74LS74AN
See NS Package Number E20A, J14A, M14A, N14A or W14B
Function Table
Inputs Outputs
PR CLR CLK D Q Q
LH XXHL
HL XXLH
LL XXH*H*
HH
u
HH L
HH
u
LL H
HH LXQ
0Q
0
H
e
High Logic Level
XeEither Low or High Logic Level
LeLow Logic Level
u
ePositive-going Transition
*eThis configuration is nonstable; that is, it will not persist when either the preset
and/or clear inputs return to their inactive (high) level.
Q0eThe output logic level of Q before the indicated input conditions were established.
C1995 National Semiconductor Corporation RRD-B30M105/Printed in U. S. A.
Absolute Maximum Ratings (Note)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
Supply Voltage 7V
Input Voltage 7V
Operating Free Air Temperature Range
DM54LS and 54LS b55§Ctoa
125§C
DM74LS 0§Ctoa
70§C
Storage Temperature Range b65§Ctoa
150§C
Note:
The ‘‘Absolute Maximum Ratings’’ are those values
beyond which the safety of the device cannot be guaran-
teed. The device should not be operated at these limits. The
parametric values defined in the ‘‘Electrical Characteristics’’
table are not guaranteed at the absolute maximum ratings.
The ‘‘Recommended Operating Conditions’’ table will define
the conditions for actual device operation.
Recommended Operating Conditions
Symbol Parameter DM54LS74A DM74LS74A Units
Min Nom Max Min Nom Max
VCC Supply Voltage 4.5 5 5.5 4.75 5 5.25 V
VIH High Level Input Voltage 2 2 V
VIL Low Level Input Voltage 0.7 0.8 V
IOH High Level Output Current b0.4 b0.4 mA
IOL Low Level Output Current 4 8 mA
fCLK Clock Frequency (Note 2) 0 25 0 25 MHz
fCLK Clock Frequency (Note 3) 0 20 0 20 MHz
tWPulse Width Clock High 18 18
(Note 2) Preset Low 15 15 ns
Clear Low 15 15
tWPulse Width Clock High 25 25
(Note 3) Preset Low 20 20 ns
Clear Low 20 20
tSU Setup Time (Notes 1 and 2) 20
u
20
u
ns
tSU Setup Time (Notes 1 and 3) 25
u
25
u
ns
tHHold Time (Note 1 and 4) 0
u
0
u
ns
TAFree Air Operating Temperature b55 125 0 70 §C
Note 1: The symbol (
u
) indicates the rising edge of the clock pulse is used for reference.
Note 2: CLe15 pF, RLe2kX,T
Ae25§C, and VCC e5V.
Note 3: CLe50 pF, RLe2kX,T
Ae25§C, and VCC e5V.
Note 4: TAe25§C and VCC e5V.
2
Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted)
Symbol Parameter Conditions Min Typ Max Units
(Note 1)
VIInput Clamp Voltage VCC eMin, IIeb
18 mA b1.5 V
VOH High Level Output VCC eMin, IOH eMax DM54 2.5 3.4 V
Voltage VIL eMax, VIH eMin DM74 2.7 3.4
VOL Low Level Output VCC eMin, IOL eMax DM54 0.25 0.4
Voltage VIL eMax, VIH eMin DM74 0.35 0.5 V
IOL e4 mA, VCC eMin DM74 0.25 0.4
IIInput Current @Max VCC eMax Data 0.1
Input Voltage VIe7V Clock 0.1 mA
Preset 0.2
Clear 0.2
IIH High Level Input VCC eMax Data 20
Current VIe2.7V Clock 20 mA
Clear 40
Preset 40
IIL Low Level Input VCC eMax Data b0.4
Current VIe0.4V Clock b0.4 mA
Preset b0.8
Clear b0.8
IOS Short Circuit VCC eMax DM54 b20 b100 mA
Output Current (Note 2) DM74 b20 b100
ICC Supply Current VCC eMax (Note 3) 4 8 mA
Note 1: All typicals are at VCC e5V, TAe25§C.
Note 2: Not more than one output should be shorted at a time, and the duration should not exceed one second. For devices, with feedback from the outputs, where
shorting the outputs to ground may cause the outputs to change logic state an equivalent test may be performed where VOe2.25V and 2.125V for DM54 and
DM74 series, respectively, with the minimum and maximum limits reduced by one half from their stated values. This is very useful when using automatic test
equipment.
Note 3: With all outputs open, ICC is measured with CLOCK grounded after setting the Q and Q outputs high in turn.
Switching Characteristics at VCC e5V and TAe25§C (See Section 1 for Test Waveforms and Output Load)
From (Input) RLe2kX
Symbol Parameter To (Output) CLe15 pF CLe50 pF Units
Min Max Min Max
fMAX Maximum Clock Frequency 25 20 MHz
tPLH Propagation Delay Time Clock to 25 35 ns
Low to High Level Output Q or Q
tPHL Propagation Delay Time Clock to 30 35 ns
High to Low Level Output Q or Q
tPLH Propagation Delay Time Preset 25 35 ns
Low to High Level Output to Q
tPHL Propagation Delay Time Preset 30 35 ns
High to Low Level Output to Q
tPLH Propagation Delay Time Clear 25 35 ns
Low to High Level Output to Q
tPHL Propagation Delay Time Clear 30 35 ns
High to Low Level Output to Q
3
Physical Dimensions inches (millimeters)
Ceramic Leadless Chip Carrier Package (E)
Order Number 54LS74LMQB
NS Package Number E20A
14-Lead Ceramic Dual-In-Line Package (J)
Order Number 54LS74DMQB or DM54LS74AJ
NS Package Number J14A
4
Physical Dimensions inches (millimeters) (Continued)
14-Lead Small Outline Molded Package (M)
Order Number DM74LS74AM
NS Package Number M14A
14-Lead Molded Dual-In-Line Package (N)
Order Number DM74LS74AN
NS Package Number N14A
5
54LS74/DM54LS74A/DM74LS74A Dual Positive-Edge-Triggered
D Flip-Flops with Preset, Clear and Complementary Outputs
Physical Dimensions inches (millimeters) (Continued)
14-Lead Ceramic Flat Package (W)
Order Number 54LS74FMQB or DM54LS74AW
NS Package Number W14B
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.
National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Corporation Europe Hong Kong Ltd. Japan Ltd.
1111 West Bardin Road Fax: (
a
49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309
Arlington, TX 76017 Email: cnjwge
@
tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408
Tel: 1(800) 272-9959 Deutsch Tel: (
a
49) 0-180-530 85 85 Tsimshatsui, Kowloon
Fax: 1(800) 737-7018 English Tel: (
a
49) 0-180-532 78 32 Hong Kong
Fran3ais Tel: (
a
49) 0-180-532 93 58 Tel: (852) 2737-1600
Italiano Tel: (
a
49) 0-180-534 16 80 Fax: (852) 2736-9960
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.