TAK CHEONG SEM ICONDUCTOR 1.3 Watt DO-41 Hermetically Sealed Glass Zener Voltage Regulators Absolute Maximum Ratings AXIAL LEAD DO41 TA = 25C unless otherwise noted Parameter Value Units 1.3 W -65 to +200 C Operating Junction Temperature +200 C Lead Temperature (1/16" from case for 10 seconds) +230 C Power Dissipation Storage Temperature Range DEVICE MARKING DIAGRAM L 85C xxx L : Logo Device Code : TCBZX85C3V3 These ratings are limiting values above which the serviceability of the diode may be impaired. Specification Features: Zener Voltage Range 3.3 to 56 Volts DO-41 Package (JEDEC) Through-Hole Device Type Mounting Hermetically Sealed Glass Cathode Anode Compression Bonded Construction All external surfaces are corrosion resistant and leads are readily solderable ELECTRICAL SYMBOL Cathode indicated by polarity band Electrical Characteristics Device Type TCBZX85C 3V3 TCBZX85C 3V6 TCBZX85C 3V9 TCBZX85C 4V3 TCBZX85C 4V7 TCBZX85C 5V1 TCBZX85C 5V6 TCBZX85C 6V2 TCBZX85C 6V8 TCBZX85C 7V5 TCBZX85C 8V2 TCBZX85C 9V1 TCBZX85C 10 TCBZX85C 11 TCBZX85C 12 TCBZX85C 13 TCBZX85C 15 TCBZX85C 16 TCBZX85C 18 TCBZX85C 20 TCBZX85C 22 VZ @ IZT (Volts) VZ VZ Min Max 3.1 3.5 3.4 3.8 3.7 4.1 4 4.6 4.4 5 4.8 5.4 5.2 6 5.8 6.6 6.4 7.2 7 7.9 7.7 8.7 8.5 9.6 9.4 10.6 10.4 11.6 11.4 12.7 12.4 14.1 13.8 15.6 15.3 17.1 16.8 19.1 18.8 21.2 20.8 23.3 TA = 25C unless otherwise noted IZT (mA) ZZT @ IZT () Max IZK (mA) ZZK @ IZK () Max IR @ VR (A) Max VR (Volts) 80 60 60 50 45 45 45 35 35 35 25 25 25 20 20 20 15 15 15 10 10 20 20 15 13 13 10 7 4 3.5 3 5 5 7 8 9 10 15 15 20 24 25 1 1 1 1 1 1 1 1 1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 400 500 500 500 500 500 400 300 300 200 200 200 200 300 350 400 500 500 500 600 600 40 20 20 3 3 1 1 1 1 1 1 1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1 1 1 1 1 1.5 2 3 4 4.5 6.2 6.9 7.5 8.2 9.1 10 11 12 13 15 16 March 2003 / B Page 1 TCBZX85C3V3 through TCBZX85C56 Series (R) (R) TAK CHEONG SEM ICONDUCTOR Electrical Characteristics TA = 25C unless otherwise noted VZ @ IZT IR @ VR ZZT @ IZT ZZK @ IZK IZK VR IZT (Volts) Device Type () () (A) (mA) (mA) (Volts) VZ VZ Max Max Max Min Max TCBZX85C 24 22.8 25.6 10 25 0.5 600 0.5 18 TCBZX85C 27 25.1 28.9 8 30 0.25 750 0.5 20 TCBZX85C 30 28 32 8 30 0.25 1000 0.5 22 TCBZX85C 33 31 35 8 35 0.25 1000 0.5 24 TCBZX85C 36 34 38 8 40 0.25 1000 0.5 25 TCBZX85C 39 37 41 6 45 0.25 1000 0.5 27 TCBZX85C 43 40 46 6 50 0.25 1000 0.5 30 TCBZX85C 47 44 50 4 90 0.25 1500 0.5 33 TCBZX85C 51 48 54 4 115 0.25 1500 0.5 36 TCBZX85C 56 52 60 4 120 0.25 2000 0.5 39 VF Forward Voltage = 1.2 V Maximum @ IF = 200 mA for all types Notes: 1. The type numbers listed have zener voltage min/max limits as shown and have a standard tolerance on the nominal zener voltage. 2. For detailed information on price, availability and delivery of nominal zener voltages between the voltages shown and tighter voltage tolerances, contact your nearest Tak Cheong Electronics representative. 3. The zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed to IZT or IZK. Electrical Symbol Definition Symbol Typical Characteristics I Parameter (mA) VZ Reverse Zener Voltage @ IZT IZT Reverse Current ZZT Maximum Zener Impedance @ IZT IZK Reverse Current ZZK Maximum Zener Impedance @ IZK IF (mV) VZ VR IR Reverse Leakage Current @ VR VR Breakdown Voltage IF Forward Current VF Forward Voltage @ IF IR IZT (V) VF V (nA) (mA) Ordering Information Device Package Quantity TCBZX85Cxxx Bulk 5,000 TCBZX85Cxxx.TB Tape and Ammo 3,000 TCBZX85Cxxx.TR Tape and Reel 5,000 TCBZX85Cxxx Others (...contact Tak Cheong sales representatives) Axial-Lead Tape Packaging Standards This axial-lead component's packaging requirements use in automatic testing and assembly equipment. And this standard practices for lead-tape packaging of axial-lead components meets the requirements of EIA Standard RS-296-D "Lead-taping of Components on Axial Lead Configuration for Automatic Insertion". March 2003 / B Page 2 (R) TAK CHEONG SEM ICONDUCTOR Tape & Reel Packaging Information Tape & Reel Outline Reel Dimensions DIM Millimeters D1 356 D2 30 D3 84 W1 77.5 PKG Type Quantity Per Reel DO-41 5,000 Quantity Per Reel March 2003 / B Page 3 (R) TAK CHEONG SEM ICONDUCTOR Tape & Ammo Packaging Information Tape & Ammo Outline 250mm x 80mm x 80mm Quantity Per Ammo Box PKG Type Quantity Per Box DO-41 3,000 Taping Dimensions Description Standard Width Millimeters 52 26 Tape Spacing (B) 52 0.69 26 +0.5 / -0 Component Pitch (C) 5.08 0.4 5.08 0.4 Untaped Lead (L1 - L2) 0.69 0.69 Glass Offset (F) 0.69 0.69 Bent (D) Tape Width (G) Tape Mismatch (E) Taped Lead (G) Lead Beyond Tape (H) 1.2 Max 1.2 Max 6.138 0.576 6.138 0.576 0.55 Max 0.55 Max 3.2 Min 3.2 Min 0 0 March 2003 / B Page 4 (R) TAK CHEONG SEM ICONDUCTOR Bulk Packaging Information 190mm x 150mm x 65mm Quantity Per Plastic Bag DO-41 Bulk Outline 500 x 10 Plastic Bag Plastic Bag PKG Type Quantity Per Box DO-41 5,000 Quantity Per Box March 2003 / B Page 5 (R) TAK CHEONG SEM ICONDUCTOR Package Outline Package Case Outline D0-41 DO-41 DIM Millimeters Inches Min Max Min Max A 0.72 0.86 0.028 0.034 B 4.07 5.20 0.160 0.205 C 25.40 --- 1.000 --- D 2.04 2.71 0.080 0.107 Notes: 1. 2. All dimensions are within JEDEC standard. DO41 polarity denoted by cathode band. March 2003 / B Page 6