RUGGEDCOM NMS
User Guide
Chapter 4
Configuring RUGGEDCOM NMS
Adding/Editing a Threshold 77
Figure51:Edit Threshold Screen – Basic Threshold
1.Type List 2.Datasource Box 3.Datasource Type List 4.Datasource Label Box 5.Value Box 6.Re-Arm Box 7.Trigger Box
8.Triggered UEI Box 9.Re-Armed UEI Box 10.Save Button 11.Cancel Button 12.Field Name Box 13.Regular Expression Box
14.Add Button
5. Configure the following parameters as required:
Parameter Description
Type Synopsis: { high, low, relativeChange }
Default: high
The threshold type. Options include:
•high – Triggers when the value of the data source equals or exceeds the value of the
threshold. The threshold is re-armed when the value equals or is less than the re-arm
value.
•low – Triggers when the value of the data source equals or is less than the value of
the threshold. The threshold is re-armed when the value equals or exceeds the re-arm
value.
•relativeChange – Use to determine the relative difference between two samples.
This type uses the Value parameter to determine in which direction the threshold is
exceeded. For example, a value of 0.95 will trigger the threshold if the sample is at
least 5% less than the previous sample. Alternatively, a value of 1.05 will trigger the
threshold if the sample is at least 5% higher than the previous sample.
Expression For expression-based thresholds only.
A mathematical expression involving multiple data source names that will be evaluated
and compare to the threshold values. For a list of available expressions based on data
source and type, refer to Section4.9.7, “Available Data Sources, Types and Expressions”.
Datasource The name of the MIB element to monitor. For a list of available data sources, refer to
Section4.9.7, “Available Data Sources, Types and Expressions”.
Datasource Type Synopsis: { node, if, coolingDeviceIndex, mplsL3VpnVrf, ciscoSlbInstance,
cesServerFarmRserverEntry, rttMonCtrlAdminIndex, aixPhysicalVolume, umOrgIndex,
CHAN, astChanType, powerUsageIndex, sinifCpuInstance, temperatureProbeIndex,
cbgpPeerAddrFamilyPrefixEntry, appIIndex, hpuxFSTable, ipuMGCPMsgStatsEntr,
ciscoApCntIndex, aixPrintQueue, hrDeviceEntry, sinfNetInstance, netwareDisk,
asAppIndex, aixVolumeGroup, msdpPeerEntry, ciscoEnvMonTemperatureStatusIndex,
ciscoEnvMonVoltageStatusIndex, mtxrWIStatIndex, pipePosition, ainfCpuinstance,
IgpEnvTemperatureIdDegF, drsChassisIndex, diskIOIndex, juniSystemTempIndex,
ltmVSStatName, drsPSUIndex, ciscoMemoryPoolType, aixPagingSpace, ItmPoolStatName,
vcPipePosition, mtxrWIRtabAddr, ainfLDskInstance, dskIndex, prtMarkerSuppliesIndex,
naDfIndex, bgpPeerEntry, pgmonIndex, hrStorageIndex, f5ifName, SSID,
IgpPwrMeasurementPtIndex, pethMainPseGroupIndex, rPDULoadStatusIndex,
aixFilesystem, EqVol, ainfNetInstance, junSystemSlot, sinfLDskInstance }
Default: node