QEE113 Plastic Infrared Light Emitting Diode FeaturesPACKAGE DIMENSIONS Description = 940nm The QEE113 is a 940nm GaAs LED encapsulated in a medium wide angle, plastic sidelooker package. Package Type = Sidelooker Chip Material = GaAs Matched Photosensor: QSE113 Medium Wide Emission Angle, 50 Package Material: Clear Epoxy High Output Power Gray stripe on the top side Package Dimensions 0.175 (4.44) 0.087 (2.22) 0.050 (1.27) O0.065 (1.65) 0.200 (5.08) O0.095 (2.41) 0.500 (12.70) MIN CATHODE ANODE Schematic 0.020 (0.51) SQ. (2X) 0.100 (2.54) ANODE CATHODE 0.030 (0.76) 0.100 (2.54) NOM Notes: 1. Dimensions of all drawings are in inches (mm). 2. Tolerance is 0.010 (0.25) on all non-nominal dimensions unless otherwise specified. (c)2002 Fairchild Semiconductor Corporation QEE113 Rev. 1.0.1 www.fairchildsemi.com QEE113 -- Plastic Infrared Light Emitting Diode August 2008 Symbol Parameter Rating Units TOPR Operating Temperature -40 to +100 C TSTG Storage Temperature -40 to +100 C TSOL-I Soldering Temperature (Iron)(2,3,4) 240 for 5 sec C TSOL-F (Flow)(2,3) 260 for 10 sec C 50 mA IF Soldering Temperature Continuous Forward Current VR Reverse Voltage PD Power Dissipation(1) 5 V 100 mW Notes: 1. Derate power dissipation linearly 1.33mW/C above 25C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Soldering iron 1/16" (1.6mm) minimum from housing. Electrical / Optical Characteristics (TA = 25C) Symbol Parameter PE Peak Emission Wavelength TC Temperature Coefficient Test Conditions IF = 20mA 21/2 Emission Angle IF = 100mA VF Forward Voltage IF = 100mA, tp = 20ms TCVF VR = 5V IE Radiant Intensity IF = 100mA, tp = 20ms Temperature Coefficient tf Fall Time Cj Junction Capacitance (c)2002 Fairchild Semiconductor Corporation QEE113 Rev. 1.0.1 IF = 100mA VR = 0V 3 Units 945 nm 0.3 nm / C -2 Reverse Current Rise Time Max. 1.5 Temperature Coefficient tr Typ. 50 IR TCIE Min. 7.5 V mV / C 10 A 12 mW/sr -0.7 % / C 800 ns 800 ns 14 pF www.fairchildsemi.com 2 QEE113 -- Plastic Infrared Light Emitting Diode Absolute Maximum Ratings (TA = 25C unless otherwise specified) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Fig. 1 Normalized Intensity vs. Wavelength Fig. 2 Peak Wavelength vs. Ambient Temperature 1.0 PE - PEAK EMISSION WAVELENGTH 975 NORMALIZED INTENSITY 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 700 750 800 850 900 950 1,000 IF = 20mA DC 970 965 960 955 950 945 940 935 1,050 0 10 20 (nm) Ie - NORMALIZED RADIANT INTENSITY Ie - NORMALIZED RADIANT INTENSITY 1 60 70 80 90 100 100 Normalized to: IF = 20mA Pulsed tPW = 20ms Duty Cycle = 4% TA = 25C 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.1 10 1000 0 10 20 30 40 50 60 70 80 90 100 TA - AMBIENT TEMPERTURE (C) IF - FORWARD CURRENT (mA) Fig. 6 Forward Voltage vs. Ambient Temperature Fig. 5 Forward Voltage vs. Forward Current 1.55 3.5 IF Pulsed tPW = 20ms Duty Cycle = 4% TA = 25C VF - FORWARD VOLTAGE (V) VF - FORWARD VOLTAGE (V) 50 1.4 Normalized to: IF = 100mA Pulsed tPW = 20ms Duty Cycle = 4% TA = 25C 2.5 2.0 1.5 1.0 10 40 Fig. 4 Normalized Radient Intensity vs. Ambient Temperature Fig. 3 Normalized Radiant Intensity vs. Forward Current 10 3.0 30 TA - AMBIENT TEMPERTURE (C) IF = 20mA Pulsed tPW = 20ms Duty Cycle = 4% 1.50 1.45 1.40 1.35 1.30 1.25 100 0 1000 (c)2002 Fairchild Semiconductor Corporation QEE113 Rev. 1.0.1 10 20 30 40 50 60 70 80 90 100 TA - AMBIENT TEMPERTURE (C) IF - FORWARD CURRENT (mA) www.fairchildsemi.com 3 QEE113 -- Plastic Infrared Light Emitting Diode Typical Performance Curves IC (ON) - NORMALIZED COLLECTOR CURRENT Fig. 8 Coupling Characteristics of QEE113 And QSE113 Fig. 7 Radiation Diagram 110 100 90 80 70 120 60 130 50 140 40 150 30 160 20 170 180 1.0 10 0.8 0.6 0.4 0.2 0.0 0.2 0.4 0.6 0.8 0 1.0 1.0 Normalized to: d = 0 inch IF Pulsed tpw = 100s Duty Cycle = 0.1% VCC = 5V RL = 100 TA = 25C 0.8 0.6 0.4 0.2 0.0 0 1 2 3 4 5 6 LENS TIP SEPARATION (inches) (c)2002 Fairchild Semiconductor Corporation QEE113 Rev. 1.0.1 www.fairchildsemi.com 4 QEE113 -- Plastic Infrared Light Emitting Diode Typical Performance Curves (Continued) Build it NowTM CorePLUSTM CorePOWERTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EfficentMaxTM EZSWITCHTM * TM (R) Fairchild(R) Fairchild Semiconductor(R) FACT Quiet SeriesTM (R) FACT FAST(R) FastvCoreTM FlashWriter(R) * FPSTM F-PFSTM FRFET(R) SM Global Power Resource Green FPSTM Green FPSTM e-SeriesTM GTOTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM MotionMaxTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R) (R) PowerTrench(R) Programmable Active DroopTM (R) QFET QSTM Quiet SeriesTM RapidConfigureTM TM Saving our world, 1mW/W/kW at a timeTM SmartMaxTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SupreMOSTM SyncFETTM PDP SPMTM Power-SPMTM (R) The Power Franchise TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM VisualMaxTM (R) * EZSWITCHTM and FlashWriter(R) are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I36 (c)2002 Fairchild Semiconductor Corporation QEE113 Rev. 1.0.1 www.fairchildsemi.com 5 QEE113 -- Plastic Infrared Light Emitting Diode TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.