www.vishay.com For technical questions, contact: ww2aresistors@vishay.com Document Number: 30119
50 Revision: 12-Jan-06
CP0002...13
Vishay Dale
Wirewound Resistors,
Commercial Power, Low Value
FEATURES
•Open air design
•Complete welded construction
•Low temperature coefficient
•Extremely low resistance values
•Low inductance
Note
(1) Other values available, contact factory
* Pb containing terminations are not RoHS compliant, exemptions may apply
Available
Pb-free
RoHS*
COMPLIANT
e3
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL MODEL
POWER RATING
P70 °C
W
RESISTANCE VALUE (1)
Ω
TOLERANCE
± %
WEIGHT
(Typical)
g
CP0002...13 1 0.005 to 0.03 1 0.2
TECHNICAL SPECIFICATIONS
PARAMETER UNIT CP0002...13
Temperature Coefficient ppm/°C
Element = ± 25
Component = ± 140
Operating Temperature °C - 55 to + 275
GLOBAL PART NUMBER INFORMATION
Global Part Numbering: CP00026L800FE5113
GLOBAL MODEL VALUE TOLERANCE CODE PACKAGING SPECIAL
CP0002 L = mΩ
(below 0.01 Ω)
R = Decimal
5L000 = 0.005 Ω
R0100 = 0.01 Ω
F = ± 1.0 %
J = ± 5.0 %
E51 = Lead (Pb)-free, bulk
S51 = Tin/lead, bulk
(Dash number)
(up to 3 digits)
From 1 - 999 as
applicable
CP00026L800FE5 113
Document Number: 30119 For technical questions, contact: ww2aresistors@vishay.com www.vishay.com
Revision: 12-Jan-06 51
CP0002...13
Wirewound Resistors,
Commercial Power, Low Value Vishay Dale
DIMENSIONS [in millimeters]
MECHANICAL SPECIFICATIONS
Terminal Strength: 10 pounds minimum
Construction: A completely welded assembly using a
premium quality copper-nickel element and tinned copper
terminals.
Packaging: Layered bulk packaging, 2000 pc/bag sealed
DERATING
0.112
[2.85]
Max.
0.050 ± 0.010
[1.27 ± 0.254]
0.125 ± 0.030
[3.18 ± 0.762]
0.040 ± 0.002
[1.02 ± 0.051]
0.450 ± 0.020
[11.43 ± 0.508]
0.312 [7.95]
Ty p .
0.070 [1.78]
Ty p .
Derating
- 65 - 25 25 75 125 175 225 275
Ambient Temperature in °C
120
100
80
60
40
20
0
70
Rated Power in %
PERFORMANCE
TEST CONDITIONS OF TEST TEST LIMITS
Thermal Shock - 55 °C to + 150 °C, 1000 cycles, 15 min at each extreme ± (0.5 % + 0.0005 Ω) ΔR
Short Time Overload 5 x rated power for 5 s ± (0.5 % + 0.0005 Ω) ΔR
Low Temperature Operation - 65 °C for 24 h ± (0.5 % + 0.0005 Ω) ΔR
High Temperature Exposure 1000 h at + 170 °C ± (1.0 % + 0.0005 Ω) ΔR
Bias Humidity + 85 °C, 85 % RH, 10 % Bias, 1000 h ± (0.5 % + 0.0005 Ω) ΔR
Mechanical Shock 100 g’s for 6 ms, 5 pulses ± (0.5 % + 0.0005 Ω) ΔR
Vibration Frequency varied 10 to 2000 Hz in 1 min, 3 directions, 12 h ± (0.5 % + 0.0005 Ω) ΔR
Load Life 1000 h at rated power, + 70 °C, 1.5 h “ON”, 0.5 h “OFF” ± (1.0 % + 0.0005 Ω) ΔR
Resistance to Solder Heat + 260 °C solder, 10 - 12 s dwell, 25 mm/s emergence ± (0.5 % + 0.0005 Ω) ΔR
Moisture Resistance MIL-STD-202, Method 106, 0 % power, 7a and 7b not required ± (0.5 % + 0.0005 Ω) ΔR
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
