Approval sheet
Page 1 of 9 ASC_MR_V07 Jan.2013
MR12, MR10, MR08, MR06, MR04
±
±±
±1%, ±
±±
±5%
General purpose chip resistors
Size 1206, 1210, 0805, 0603, 0402
( Automotive & Anti-Sulfuration )
*Contents in this sheet are subject to change without prior notice.
Approval sheet
Page 2 of 9 ASC_MR_V07 Jan.2013
FEATURE
1. High reliability and stability ±1%
2. Sulfuration resistant
3. Automotive grade AEC Q-200 Compliant
4. 100% CCD inspection
5. RoHS compliant and Lead free products
APPLICATION
Automotive application
Consumer electrical equipment
EDP, Computer application
Telecom application
DESCRIPTION
The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are
added at each end and connected by a resistive paste that is applied to the top surface of the substrate. The
composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to
within tolerance by laser cutting of this resistive layer.
The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For
ease of soldering the outer layer of these end terminations is a Tin (lead free) alloy.
Fig 1. Construction of a Chip-R
Approval sheet
Page 3 of 9 ASC_MR_V07 Jan.2013
QUICK REFERENCE DATA
Item General Specification
Series No. MR10 MR12 MR08 MR06 MR04
Size code 1210(3225) 1206(3216) 0805(2012) 0603(1608) 0402(1005)
Resistance
Range 1~10M (±5% tolerance), Jumper
1~10M (±1% tolerance)
Resistance
Tolerance
±1%
E96/E24
±5%
E24
±1%
E96/E24
±5%
E24
±1%
E96/E24
±5%
E24
±1%
E96/E24
±5%
E24
±1%
E96/E24
±5%
E24
TCR (ppm/°C)
R > 1M
10 < R 1M
R 10
± 200
± 100
-200~+400
± 200
± 100
-200~+400
± 200
± 100
-200~+400
± 200
± 100
-200~+400
± 200
± 100
-200~+400
Max. dissipation
@ T
amb
=70°C 1/2 W 1/4 W 1/8 W 1/10 W 1/16 W
Max. Operation
Voltage (DC or
RMS) 200V 200V 150V 75V 50V
Max. Overload
Voltage (DC or
RMS) 400V 400V 300V 150V 100V
Climatic
category
(IEC 60068) 55/155/56
Note :
1. This is the maximum voltage that may be continuously supplied to the resistor element, see “IEC publication
60115-8”
2. Max. Operation Voltage : So called RCWV (Rated Continuous Working Voltage) is determined by
ValueResistancePower RatedRCWV ×=
or Max. RCWV listed above, whichever is lower.
3. The resistance of Jumper is defined <0.05.
DIMENSIONS (unit : mm)
MR10 MR12 MR08 MR06 MR04
L 3.10 ± 0.10
3.10 ± 0.10
2.00 ± 0.10
1.60 ± 0.10
1.00 ± 0.05
W 2.60 ± 0.10
1.60 ± 0.10
1.25 ± 0.10
0.80 ± 0.10
0.50 ± 0.05
T 0.55 ± 0.10
0.60 ± 0.15
0.50 ± 0.15
0.45 ± 0.15
0.35 ± 0.05
Tb 0.50 ± 0.20
0.45 ± 0.20
0.40 ± 0.20
0.30 ± 0.15
0.25 ± 0.10
Tt 0.50 ± 0.20
0.50 ± 0.20
0.40 ± 0.20
0.30 ± 0.10
0.20 ± 0.10
Approval sheet
Page 4 of 9 ASC_MR_V07 Jan.2013
MARKING
Size \ Nr. Of digit of code\tolerance ±
±±
±5% ±
±±
±1%
1210/1206/0805 3-digits marking 4-digits marking
0603 (1608) 3-digits marking 3-digits marking
0402(1005) N0 MARKING
3-digits marking±5% : 1206, 1210, 0805 & 0603
Each resistor is marked with a three digits code on the protective coating to designate the nominal resistance value.
3-digits marking±1% : 0603
Nominal resistance Description
1.E-24 series As 0603 WR06X ±5%.
2.E-96 series The 1st two digit codes are referring to the CODE on the table, the 3rd code is the index of resistance
value :
Y=10
-2
X=10
-1
A=10
0
B=10
1
C=10
2
D=10
3
E=10
4
F=10
5
EX : 17.8Ω=25X178Ω=25A1K78 =25B
17K8=25C 178K=25D 1M78=25E
3. Remark There is no marking for the items are not under E-24 and E-96 series
CODE
R_value
CODE
R_value
CODE
R_Value
CODE
R_value
CODE
R_value
CODE
R_value
CODE
R_value
CODE
R_value
01 100
13 133
25 178
37 237
49 316
61 422
73 562
85 750
02 102
14 137
26 182
38 243
50 324
62 432
74 576
86 768
03 105
15 140
27 187
39 249
51 332
63 442
75 590
87 787
04 107
16 143
28 191
40 255
52 340
64 453
76 604
88 806
05 110
17 147
29 196
41 261
53 348
65 464
77 619
89 825
06 113
18 150
30 200
42 267
54 357
66 475
78 634
90 845
07 115
19 154
31 205
43 274
55 365
67 487
79 649
91 866
08 118
20 158
32 210
44 280
56 374
68 499
80 665
92 887
09 121
21 162
33 215
45 287
57 383
69 511
81 681
93 909
10 124
22 165
34 221
46 294
58 392
70 523
82 698
94 931
11 127
23 169
35 226
47 301
59 402
71 536
83 715
95 953
12 130
24 174
36 232
48 309
60 412
72 549
84 732
96 976
4-digits marking
±1% : 1210/1206/0805
Each resistor is marked with a four digits code on the protective coating to designate the nominal resistance value.
Example
RESISTANCE 10 12 100 6800 47000
3-digits marking
1210, 1206, 0805, 0603 ±
±±
±5%
100 120 101 682 473
4-digits marking 10R0 12R0 1000 6801 4702
Approval sheet
Page 5 of 9 ASC_MR_V07 Jan.2013
FUNCTIONAL DESCRIPTION
Product characterization
Standard values of nominal resistance are taken from the E24 series for resistors with a tolerance of ±5%,
and E24+E96 series for resistors with a tolerance of ±1%. The values of the E24/E96 series are in accordance
with “IEC publication 60063”.
Derating
The power that the resistor can dissipate depends on the operating temperature; see Fig.2.1
Figure 2.1
Maximum dissipation in percentage of rated power as a
function of the ambient temperature
MOUNTING
Due to their rectangular shapes and small tolerances, Surface Mountable Resistors are suitable for handling by
automatic placement systems.
Chip placement can be on ceramic substrates and printed-circuit boards (PCBs).
Electrical connection to the circuit is by individual soldering condition.
The end terminations guarantee a reliable contact.
Approval sheet
Page 6 of 9 ASC_MR_V07 Jan.2013
SOLDERING CONDITION
The robust construction of chip resistors allows
them to be completely immersed in a solder bath of
260°C for 10 seconds. Therefore, it is possible to
mount Surface Mount Resistors on one side of a
PCB and other discrete components on the
reverse (mixed PCBs).
Surface Mount Resistors are tested for
solderability at 235°C during 2 seconds. The test
condition for no leaching is 260°C for 30 seconds.
Typical examples of soldering processes that
provide reliable joints without any damage are
given in Fig 3.
Fig 3. Infrared soldering profile for Chip Resistors
CATALOGUE NUMBERS
The resistors have a catalogue number starting with .
MR12 X 472_ J T L
Automotive
code
MR10 : 1210
MR12 : 1206
MR08 : 0805
MR06 : 0603
MR04: 0402
Type code
X :
±5%, 1 ~ 10M
±1%, 10 ~ 1M
W :
±1%, < 10; >1M
Resistance code
±
±±
±5%, E24: 2 significant digits
followed by no. of zeros and
a blank
220 = 221_ ( “_” means a
blank )
Resistance code
±
±±
±1%, E24+E96: 3 significant
digits followed by no. of
zeros
E96: 37.4K = 3742
E24: 220 = 2200
Tolerance
F : ±1%
J : ±5%
P : Jumper
Packaging code
T : 7” Reeled taping
Q : 10” Reeled taping
G : 13” Reeled taping
B : Bulk
Termination
code
L = Sn base
(lead free)
* Anti-Sulfuration test conditions: H2S 3ppm, 40’C, RH 90%, 1000hrs, criteria: +/-1% !
MR10, MR12,MR08,MR06:
1. Reeled tape packaging : 8mm width paper taping 5000pcs per 7” reel, 10kpcs per 10” reel, 20kpcs per 13” reel.
2. Bulk packaging : 5000pcs per poly-bag
MR04:
1. Reeled tape packaging : 8mm width paper taping 10,000pcs per reel,
2. Bulk packaging : 10,000pcs per poly-bag
Approval sheet
Page 7 of 9 ASC_MR_V07 Jan.2013
TEST AND REQUIREMENTS
Essentially all tests are carried out according to the schedule of IEC publication 115-8, category
LCT/UCT/56(rated temperature range : Lower Category Temperature, Upper Category Temperature; damp
heat, long term, 56 days). The testing also meets the requirements specified by EIA, EIAJ and JIS.
The tests are carried out in accordance with IEC publication 68, "Recommended basic climatic and mechanical
robustness testing procedure for electronic components" and under standard atmospheric conditions according
to IEC 60068-1, sub-clause 5.3. Unless otherwise specified, the following value supplied :
Temperature: 15°C to 35°C.
Relative humidity: 45% to 75%.
Air pressure: 86kPa to 106 kPa (860 mbar to 1060 mbar).
All soldering tests are performed with midly activated flux.
REQUIREMENTS
TEST PROCEDURE / TEST METHOD Resistance 0
Electrical Characteristics
JISC5201-1: 1998
Clause 4.8
-
DC resistance values measurement
-
Temperature Coefficient of Resistance (T.C.R)
Natural resistance change per change in degree centigrade.
( )
6
121
12 10×
ttR RR
(ppm/°C) t
1
: 20°C+5°C-1°C
R
1
: Resistance at reference temperature
R
2
: Resistance at test temperature
Within the specified tolerance
Refer to “QUICK REFERENCE DATA”
Resistance to soldering
heat (R.S.H)
MIL-STD-202
method 210
Un-mounted chips completely immersed for 10±1second in a
SAC solder bath at 270±5ºC R/R max. ±(0.5%+0.05)
No visible damage <50m
Solderability
J-STD-002
a) Bake the sample for 155 dwell time 4hrs/ solder dipping
235/ 5sec.
b) Steam the sample dwell time 1 hour/ solder dipping
260/ 7sec.
95% coverage min., good tinning and
no visible damage
Temperature cycling
JESD22
method JA-104
1000 cycles, -55 ~ +155, dwell time 5~10min R/R max. ±(0.5%+0.05)
No visible damage <50m
Moisture Resistance
MIL-STD-202
method 106
65±2°C, 80~100% RH, 10 cycles, 24 hours/ cycle
R/R max. ±(0.5%+0.05)
No visible damage <50m
Bias Humidity
MIL-STD-202
method 103
1000+48/-0 hours; 85°C, 85% RH, 10% of operation power R/R max. ±(1%+0.05)
No visible damage <50m
Operational Life
MIL-STD-202 method
108
1000+48/-0 hours; 35% of operation power, 125±2°C R/R max. ±(1%+0.05)
No visible damage <50m
Approval sheet
Page 8 of 9 ASC_MR_V07 Jan.2013
REQUIREMENTS
TEST PROCEDURE / TEST METHOD Resistance
±
5%,
±
1% 0
High Temperature
Exposure
MIL-STD-202
method 108
1000+48/-0 hours; without load in a temperature chamber
controlled 155±3°C R/R max. ±(1%+0.05)
No visible damage <50m
Mechanical Shock
MIL-STD-202
method 213
1/2 Sine Pulse / 1500g Peak / Velocity 15.4ft/sec Within the specified
tolerance
No visible damage <50m
Board Flex
AEC-Q200-005 Resistors mounted on a 90mm glass epoxy resin PCB(FR4),
bending once 2mm for 10sec
R/R max. ±(1.0%+0.05).
No visible damage <50m
Terminal strength
AEC-Q200-006 Pressurizing force: 1Kg, Test time: 60±1sec. No remarkable damage or removal of
the
terminations
Vibration
MIL-STD-202
method 204
Test 5g’s for 20min., 12 cycles each of 3 orientations R/R max. ±(1.0%+0.05)
No visible damage <50m
Thermal shock
MIL-STD-202
method 107
Test –55 to 155/ dwell time 15min/ Max transfer time 20sec
300cycles R/R max. ±(0.5%+0.05)
No visible damage <50m
ESD
AEC-Q200-002
Test contact 1.0KV ( 0.5KV for 0402 only) R/R max. ±(1%+0.05)
No visible damage <50m
TEST CONDITION FOR JUMPER (0
)
Item MR10 MR12 MR08 MR06 MR04
Power Rating At 70°C 1/2W 1/4W 1/8W 1/10W 1/16W
Resistance MAX.50m
Rated Current 3A 2A 1.5A 1A 1A
Peak Current 7.5A 5A 3.5A 3A 2A
Operating Temperature -55 ~ +155°C
Approval sheet
Page 9 of 9 ASC_MR_V07 Jan.2013
PACKAGING
Paper Tape specifications (unit :mm)
Series No. A B W F E
MR10 3.60±0.20 3.00±0.20
MR12 3.60±0.20 2.00±0.20
MR08 2.40±0.20 1.65±0.20
MR06 1.90±0.20 1.10±0.20
MR04 1.20±0.10 0.70±0.10
8.00±0.30 3.50±0.20 1.75±0.10
Series No. P1 P0 ΦD T
MR10/12/08 Max. 1.0
MR06 4.00±0.10 0.65±0.05
MR04 2.00±0.10
4.00±0.10
1.0 0.0
50.1
+
Φ
0.40±0.05
7” Reel dimensions
Symbol A B C D
(unit : mm) Φ178.0±2.0 Φ60.0±1.0 13.0±0.2 9.0±0.5