11-Serie 1000-A_12-Serie 1000-A 21/11/12 12:20 Page79 1000 series Toggle switches - metal lever - economy range Distinctive features and specifications Butt action contacts A Optional insulated levers (X213 and X490) ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : - silver contacts (A) : 6A 30VDC - silver plated copper contacts (C) : 1A 30VDC * Initial contact resistance : 10 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals 2.500 Vrms 50 Hz min. between terminals and frame * Electrical life : 10.000 cycles at full load MATERIALS * Case : - function 1 : phenolic resin - funct. 6 & 9 : polyamide * Actuator : - brass, nickel plated (1010 and 1020 models) - polyamide (1030 models) * Bushing : brass, nickel plated * Contacts : A : silver C : copper, silver plated GENERAL SPECIFICATIONS * Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut * Panel thickness : 5 mm (.196) max. * Operating temperature : -20C to +55C ABOUT THIS SERIES Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. Sealing boots are available to protect the switches against dust and water. They are presented in section H. Mounting accessories : standard hardware supplied : - silver contact models : 1 hex nut U166 + 1 knurled nut U411 - copper contact models : 1 hex nut U42 + 1 knurled nut U411 Packaging unit : 25 or 40 pieces depending on model. APEM www.apem.com A-79 11-Serie 1000-A_12-Serie 1000-A 21/11/12 12:20 Page80 1000 series Toggle switches - metal lever - economy range Solder lug and quick-connect terminals - screw terminals * 2 and 3 positions * Single pole configurations 6.35x0.80 (.25x.031) 4.50 (.177) A O3.00x0.5 SI (.118DIAx0.5 IS) 8.50 (.334) 9.20 (.362) O3.10 (.122DIA) 3.00 (.118) Keyway 6.35x0.80 (.25x.031) MODEL STRUCTURE Keyway Solder lug and quick-connect terminals III 15.00 (.925) 6.35 (.25) 14.00 (.551) 22.50 (.886) O12.00x0.75 SI (.472DIAx0.75 IS) 10.50 (.413) III OFF ON ON 12.00 (.472) OFF 28.00 (1.102) 1.00 (.039) ON ON ON I 36 12.00 (.472) 8.50 (.334) 1021 1026 1029 III 12.00 (.472) 15.00 (.039) Keyway Screw terminals I 10.50 (.413) OFF ON ON 12.00 (.472) II II18 III 0.8 (.031) I 18 12.00 (.472) OFF III 9.20 (.362) ON ON ON II 1.00 (.039) I 1011 1016 1019 O12.00x0.75 SI (.472DIAx0.75 IS) I 36 12.00 (.472) 22.50 (.886) 6.35 (.25) 14.00 (.551) PANEL CUT-OUT O12.20 (.48DIA) A-80 www.apem.com APEM 11-Serie 1000-A_12-Serie 1000-A 21/11/12 12:20 Page81 1000 series Toggle switches - metal lever - economy range Solder lug and quick-connect terminals - screw terminals CONTACT MATERIALS A C Silver Copper, silver plated A SPECIAL OPTIONS WITH INSULATED LEVER X213 Silver plated copper contacts (C) Keyway I - 12.50 (.492) ON 12.00 (.472) OFF II 9.20 (.362) 1.00 (.039) 1031CX213 O12.00x0.75 SI (.472DIAx0.75 IS) 10.50 (.413) I II 36 0.80 (.031) 12.00 (.472) 6.35 (.25) 22.50 (.886) 14.00 (.551) Ground connector U187 compulsory if the panel is not metallic or not connected to ground. Order separately, see section I. Available with silver contacts (A) or silver plated copper contacts (C) III OFF ON ON 9.20 (.362) ON ON O12.00x0.75 SI (.472DIAx0.75 IS) 10.50 (.413) 1036 X490 1039 X490 II III 1.00 (.039) I II 36 I 12.50 (.492) Keyway 12.00 (.472) X490 0.80 (.031) 12.00 (.472) 12.00 (.472) 28.00 (1.102) APEM www.apem.com 6.35 (.25) 14.00 (.551) A-81