APEM www.apem.com A-79
A
1000 series
Toggle switches - metal lever - economy range
Distinctive features and specifications
❑ Butt action contacts
❑ Optional insulated levers (X213 and X490)
MATERIALS
• Case :
- function 1 : phenolic resin
- funct. 6 & 9 : polyamide
• Actuator :
- brass, nickel plated (1010
and 1020 models)
- polyamide (1030 models)
• Bushing : brass, nickel plated
• Contacts :
A: silver
C: copper, silver plated
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
- silver contacts (A) : 6A 30VDC
- silver plated copper contacts (C) : 1A 30VDC
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength :
2.000 Vrms 50 Hz min. between terminals
2.500 Vrms 50 Hz min. between terminals and frame
• Electrical life : 10.000 cycles at full load
GENERAL SPECIFICATIONS
• Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut
• Panel thickness : 5 mm (.196) max.
• Operating temperature : -20°C to +55°C
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
Sealing boots are available to protect the switches against dust and water. They are presented in section H.
Mounting accessories : standard hardware supplied :
- silver contact models : 1 hex nut U166 + 1 knurled nut U411
- copper contact models : 1 hex nut U42 + 1 knurled nut U411
Packaging unit : 25 or 40 pieces depending on model.
ABOUT THIS SERIES
11-Serie 1000-A_12-Serie 1000-A 21/11/12 12:20 Page79
A-80 APEM www.apem.com
A
1000 series
Toggle switches - metal lever - economy range
Solder lug and quick-connect terminals - screw terminals
Screw terminals
Solder lug and quick-connect terminals
MODEL
STRUCTURE
I II III
1011 ON - OFF
1016 ON - ON
1019 ON OFF ON
I II III
1021 ON - OFF
1026 ON - ON
1029 ON OFF ON
• 2 and 3 positions
• Single pole configurations
➞Keyway
➞Keyway
➞Keyway
36˚
12.00
22.50
(.031)
(.472)
(.886)
1.00
(.039)
9.20
(.362) (.413)
10.5012.00
(.472)
Ø12.00x0.75 SI
(.472DIAx0.75 IS)
14.00
6.35
(.551)
(.25)
12.00 12.00
28.00
(.472) (.472)
(1.102)
0.8
18˚ 18˚
III II I
IIII
15.00
(.925)
14.00
6.35
12.00
22.50
Ø12.00x0.75 SI
(.472DIAx0.75 IS)
(.551)
(.25)
(.472)
(.886)
III I
36°
(.472)
12.00 10.50
(.413)
1.00
(.039)
8.50
(.334)
(.039)
15.00
(.25x.031)
(.334)
(.118)
(.118DIAx0.5 IS)
Ø3.00x0.5 SI
6.35x0.80
8.50
3.00
(.25x.031)
(.362)
6.35x0.80
9.20
4.50
(.177)
Ø3.10
(.122DIA)
PANEL CUT-OUT
(.48DIA)
Ø12.20
11-Serie 1000-A_12-Serie 1000-A 21/11/12 12:20 Page80
APEM www.apem.com A-81
A
1000 series
Toggle switches - metal lever - economy range
Solder lug and quick-connect terminals - screw terminals
CONTACT MATERIALS
ASilver
CCopper, silver plated
X213 Silver plated copper contacts (C)
SPECIAL OPTIONS WITH INSULATED LEVER
I II
1031CX213 OFF - ON
X490 Available with silver contacts (A) or silver plated copper contacts (C)
I II III
1036 X490 ON - ON
1039 X490 ON OFF ON
Ground connector U187 compulsory if the panel is not metallic or not connected to ground.
Order separately, see section I.
➞Keyway
➞Keyway
14.00
6.35
1.00
0.80
12.00
22.50
Ø12.00x0.75 SI
(.492)
12.50
(.413)
10.5012.00
(.472)
(.472DIAx0.75 IS)
36˚
(.031)
(.039)
(.551)
(.25)
(.472)
(.886)
9.20
(.362)
I II
(.472) 6.35
14.00
Ø12.00x0.75 SI
12.0012.00
28.00
(.472DIAx0.75 IS)
36˚
(.472)
(1.102)
(.25)
(.551)
(.472)
12.00 10.50
(.413) 12.50
(.492)
(.039)
1.00
(.031)
0.80
I III
(.362)
9.20
II
11-Serie 1000-A_12-Serie 1000-A 21/11/12 12:20 Page81
