Product Specification G090VTN02.0 AU OPTRONICS CORPORATION ( ) Preliminary Specifications ( V ) Final Specifications Module 9" Inch Color TFT-LCD Model Name G090VTN02.0 Customer Date Approved by Debbie Chiu Checked & Approved by 2012/10/12 Prepared by y ShengHsun Lin Note: This Specification is subject to change without notice. Date 2012/10/12 General Display Business Division / AU Optronics corporation G090VTN02.0 Ver.1.1 1/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION Contents 1. Operating Precautions.....................................................................................4 2. General Description .........................................................................................5 2.1 Display Characteristics...........................................................................................................5 2.2 Optical Characteristics ...........................................................................................................6 3. Functional Block Diagram ...............................................................................9 4. Absolute Maximum Ratings ..........................................................................10 4.1 Absolute Ratings of TFT LCD Module .................................................................................10 4.2 Absolute Ratings of Environment ........................................................................................10 5. Electrical Characteristics ..............................................................................11 5.1 TFT LCD Module .................................................................................................................. 11 5.2 Backlight Unit........................................................................................................................12 6. Signal Characteristic .....................................................................................13 6.1 Pixel Format Image ..............................................................................................................13 6.2 Signal Description ................................................................................................................14 6.3 Interface Timing ....................................................................................................................16 6.4 Power ON/OFF Sequence ...................................................................................................18 7. Connector & Pin Assignment ........................................................................19 7.1 TFT LCD Module: Connector information............................................................................19 8. Reliability Test Criteria ..................................................................................20 9. Mechanical Characteristics ...........................................................................21 9.1 LCM Outline Dimension (Front View) ..................................................................................21 9.2 LCM Outline Dimension (Rear View)...................................................................................22 10. Label and Packaging....................................................................................23 10.1 Shipping Label (on the rear side of TFT-LCD display) ......................................................23 10.2 Carton Package .................................................................................................................23 G090VTN02.0 Ver.1.1 2/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION Record of Revision Version and Date Page Old description New Description 0.0 June 29, 2012 All First draft specification - 1.0 Sep. 17, 2012 5 - Revise General Description 6 - Revise Luminace Condition 23 - Add Shipping Label & Carton Information 1.1 Oct. 12, 2012 10 Absolute Ratings of Environment G090VTN02.0 Ver.1.1 3/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 1. Operating Precautions 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) Since front polarizer is easily damaged, please be cautious and not to scratch it. Be sure to turn off power supply when inserting or disconnecting from input connector. Wipe off water drop immediately. Long contact with water may cause discoloration or spots. When the panel surface is soiled, wipe it with absorbent cotton or soft cloth. Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface. To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling TFT-LCD Module. Do not open nor modify the module assembly. Do not press the reflector sheet at the back of the module to any direction. In case if a module has to be put back into the packing container slot after it was taken out from the container, do not press the center of the LED light bar edge. Instead, press at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged. At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT Module. TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very short time. Please design your display product well to avoid external force applying to module by end-user directly. Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. Severe temperature condition may result in different luminance, response time and lamp ignition voltage. Continuous operating TFT-LCD display under low temperature environment may accelerate lamp exhaustion and reduce luminance dramatically. The data on this specification sheet is applicable when LCD module is placed in landscape position. Continuous displaying fixed pattern may induce image sticking. It's recommended to use screen saver or shuffle content periodically if fixed pattern is displayed on the screen. G090VTN02.0 Ver.1.1 4/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 2. General Description This specification applies to the Color Active Matrix Liquid Crystal Display G090VTN02.0 composed of a TFT-LCD display, a driver and power supply circuit, and a LED backlight system. The screen format is intended to support WVGA (800(H) x 480(V)) screen and 16.7M (6bit + Hi-FRC). G090VTN02.0 is a RoHS product. 2.1 Display Characteristics The following items are characteristics summary on the table under 25 oC condition: Items Unit Specifications Screen Diagonal [inch] 9 Active Area [mm] 198.000(H) x 111.696(V) Pixels H x V Pixel Pitch 800x3(RGB) x 480 [mm] 0.0825x3 (H) x 0.2327 (V) Pixel Arrangement R.G.B. Vertical Stripe t Display Mode TN, Normally White Nominal Input Voltage VDD [Volt] 3.3 (typ.) Typical Power Consumption [Watt] 2.8 Weight [Grams] 255 (typ.) Physical Size [mm] [ 211.1(H)x 128.4(V) x 6.6(D) (typ.) Electrical Interface TTL Surface Treatment Anti-glare, Hardness 3H Support Color 16.7M (6bit+Hi-FRC) Temperature Range ge Operating Storage (Non-Operating) on O RoHS Compliance [oC] [oC] -20 to +75 -30 to +80 RoHS Compliance G090VTN02.0 Ver.1.1 5/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 2.2 Optical Characteristics o The optical characteristics are measured under stable conditions at 25 C (Room Temperature): Item Unit Conditions Min. Typ. Max. Note White Luminance [cd/m2] Center point 250 300 A, B, F Uniformity 5 points % 70 A, B, F Contrast Ratio Response Time Viewing Angle Color / Chromaticity Coordinates (CIE 1931) 400 [msec] Rising - 500 10 14 A, B, D [msec] Falling - 15 21 A, B, E [msec] Rising + Falling - 25 35 [degree] [degree] Horizontal CR = 10 (Right) (Left) 60 60 70 70 - [degree] [degree] Vertical CR = 10 (Upper) (Lower) 40 60 50 70 - Red x 0.554 0.584 0.614 Red y 0.328 0.358 0.388 Green x 0.302 0.332 0.362 Green y 0.535 0.565 0.595 Blue x 0.125 5 0.155 0 0.185 Blue y 0.063 0.093 0.123 White x 3 0.263 0.313 0.363 White y 0.279 2 9 0.329 0.379 A, B, C A, B Note: A. Measurement Setup: The LCD module should be stabilized at given temperature for 15 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting backlight for 15 minutes in a windless room. B. The LED input parameter setting as: V_LED: 12V (0.1V) ; I_LED: 60mA PWM_LED: Duty 100 % G090VTN02.0 Ver.1.1 6/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION C. Definition of Viewing Angle Definition of Viewing Angle D. Definition Of Contrast Ratio (CR) The contrast ratio can be calculated by the following expression Contrast Ratio (CR) = L63 / L0 L63: Luminance of gray level 63, L0: Luminance of gray level 0 E. Definition Of Response Time (TR, TF) Figure 5 Definition of Response Time White(TFT OFF) 100% 90% 10% 0 Black TR White(TFT OFF) (TFT ON) TF Time G090VTN02.0 Ver.1.1 7/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION F. Definition Of Brightness Luminance Luminance Uniformity = (Min Luminance of 9 points) x100% (Max Luminance of 9 points) Measurement Locations H /3 H /3 Y2 Y3 H /6 Y4 V/3 V/6 H /6 Y1 Y5 Y7 Y6 V/3 Y9 V/6 Y8 G090VTN02.0 Ver.1.1 8/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 3. Functional Block Diagram The following diagram shows the functional block of the 9 inch color TFT/LCD module: G090VTN02.0 Ver.1.1 9/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 4. Absolute Maximum Ratings 4.1 Absolute Ratings of TFT LCD Module Item Symbol Min Max Unit Supply Voltage VDD -0.3 +4.0 [Volt] Max +75 90 +80 90 Unit [oC] [%RH] [oC] [%RH] 4.2 Absolute Ratings of Environment Item Operating Operation Humidity Storage Storage Humidity Symbol TOP HOP TST HST Min -20 10 -30 10 Note: When you apply the LCD module for OA system. Please make sure to keep the temperature of LCD module is less than 75 G090VTN02.0 Ver.1.1 10/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 5. Electrical Characteristics 5.1 TFT LCD Module 5.1.1 Power Specification Symbol Parameter Min Typ Max Units 3.0 3.3 3.6 [Volt] Remark VDD Logic/LCD Drive Voltage IDD VDD Current - 0.1 - [A] Irush LCD Inrush Current - - 1.5 [A] PDD VDD Power - - 0.7 [Watt] (60Hz) Allowable Logic/LCD Drive Ripple Voltage - - 200 [mV] p-p Note 2 VDDrp Note 1 Black Pattern Note 1: Measurement condition: 3.3V 90% 10% 0V 0.5ms g time VDD rising Note 2: VDD Power Dip Condition VDD Power Dip If VTHVDD Vmin.then td 10msWhen the voltage return to normal our panel must revive automatically. G090VTN02.0 Ver.1.1 11/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 5.2 Backlight Unit 5.2.1 Parameter guideline for LED Following characteristics are measured under a stable condition using an inverter at 25 Temperature): Symbol Parameter Min. Typ. Max. Units VLED LED Input 5 12 21 [V] PLED LED Power Consumption - - 2.1 W High 2.5 - 5.5 V Low 100 - 0.5 1K V Hz Ddi 5K Hz Ddi VLED_PWM FPWM VLED_EN LT PWM Signal Voltage PWM Diming Frequency LED Enable Voltage High Low LED Life Time 100 Condition Note B Ta=25 Note B Ta=25 2.5 - - 5.5 0.5 V V - 20,000 - - Hours o Ta=25 Note A Note A: The LED life time define as the estimated time to 50% degradation i of initial luminous. Note B: A higher LED power supply voltage will result in better power efficiency. Keep the VLED between 12V and 21V is strongly recommended. LED Rush Current Measure r Condition G090VTN02.0 Ver.1.1 12/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 6. Signal Characteristic 6.1 Pixel Format Image Following figure shows the relationship between input signal and LCD pixel format. st 1 1 2nd 799 th Pixel Pixel Pixel th 800 Pixel st Line R G B R G B R G B R G B R G B R G B R G B R G B th 480 Lin G090VTN02.0 Ver.1.1 13/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 6.2 Signal Description The module uses a TTL receiver and the input signal definition is as below table. Pin # Signal Name Description Remarks 1 GND Ground - 2 GND Ground - 3 VDD Power Supply 3.3V(typical) 4 VDD Power Supply 3.3V(typical) 5 UPDN Gate up or down scan control - 6 SHLR Source right or left sequence control - 7 GND Ground - 8 R0 Data Input (LSB) - 9 R1 Data Input - 10 R2 Data Input - 11 R3 Data Input - 12 GND Ground - 13 R4 Data Input - 14 R5 Data Input - 15 GND Ground - 16 R6 Data Input - 17 R7 Data Input (MSB) - 18 GND Ground -- 19 G0 Data Input (LSB) - 20 G1 Data Input - 21 G2 Data Input - 22 G3 Data Input - 23 GND Ground - 24 G4 Data Input - 25 G5 Data Input - 26 GND Ground - 27 G6 Data Input - 28 G7 Data Input (MSB) - 29 GND Ground - 30 B0 Data Input (LSB) - 31 B1 Data Input - 32 B2 Data Input - 33 B3 Data Input - 34 GND Ground - 35 B4 Data Input - 36 B5 Data Input - 37 GND Ground - 38 B6 Data Input G090VTN02.0 Ver.1.1 14/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 39 B7 Data Input (MSB) - 40 GND Ground - 41 DCLK Clock Input - 42 GND Ground - 43 DE Data Input Enable - 44 BIST Aging Mode 45 GND Ground - 46 GND Ground - 47 LED PWM System PWM Signal Input - 48 LED EN LED Enable Pin - 49 VLED LED Power Supply - 50 VLED LED Power Supply - High Enable Note1: When input 18 bits RGB data, the two low bits of R, G and B data must be grounded. Note2: Data shall be latched at falling edge of DCLK. Note3: Selection of scanning mode. Setting of scan control input Scanning Direction SHLR UPDN VDD GND Left to Right, Up to Down D GND GND Right to Left,, Up to Down VDD VDD Left to Right, t Down to Up GND VDD Right to Left, L Down to Up G090VTN02.0 Ver.1.1 15/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 6.3 Interface Timing 6.3.1 Timing Characteristics Synchronization Method DE only Parameter Symbol Min Typ Max Unit Note CLKIN Cycle Time Tcph 20 - - ns - CLKIN Pulse Duty Tcyyh 40 50 60 % - Data Set-up Time Tdsu 8 - - ns - Data Hold Time Tdhd 8 - - ns - DE Set-up Time Tesu 8 - - ns - DE Hold Time Tehd 8 - - ns - Output Stable Time Tsst - - 6 us - DCLK Frequency Fclk 28 30 40 MHz - Horizontal Display Area Thd DCLK - One Horizontal Line Th 908 928 1080 DCLK - Th-blank 108 128 - DCLK - H - H Blank Area 800 Vertical Display Area Tyd 480 V Period time Ty 517 525 704 H - V Blank Area Ty-blank 37 45 224 2 H - Note: H Blank area and V Blank area can not be changed at every frame DC Electrical (VDD=2.7 to 3.6V ,TA=( Parameter Symbol Min. Typ. Max. M Unit Conditions Low level input voltage Vil 0 - 0.3*VDD V For the digital circuit Vih 0.7*VDD - VDD V For the digital circuit High level input voltage G090VTN02.0 Ver.1.1 16/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 6.3.2 Input Timing Diagram Timing Characteristics DE DATA invalid tv-blank tvd tv valid data Vertical Input Timing ng invalid data G090VTN02.0 Ver.1.1 17/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 6.4 Power ON/OFF Sequence VDD power on/off sequence is as follows. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off. Power Sequence Power Sequencing Requirements Parameter VDD Rise Time Symbol Unit T1 ms Min 0.5 Typ -- Max 10 VDD Good to Signal Valid T2 ms 30 -- 90 Signal Valid to Backlight On T3 ms 200 -- -- Backlight Power On Time T4 ms 0.5 -- -- On T5 5 ms 10 -- -- System PWM ON to Backlight Enable On T6 ms 10 -- -- Backlight Enable Off to System PWM Off T7 ms 0 -- -- System PWM Off to B/L Power Disable T8 ms 10 -- -- Backlight Power Off Time Backlight Off to Signal Disable T9 T10 ms ms -200 10 -- 30 -- Signal Disable to VDD Down T11 ms 0 -- 50 VDD Fall Time T12 ms 1 -- 30 VDD Off Time T13 ms 500 -- -- Backlight Power Good to System PWM G090VTN02.0 Ver.1.1 18/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 7. Connector & Pin Assignment Physical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components. 7.1 TFT LCD Module: Connector information Connector Name / Designation Manufacturer Connector Model Number Signal Connector Starconn or compatible 089H50-000000-G2-R or compatible Pin No. 1 Symbol Symbol GND Pin No. 26 2 GND 27 G6 3 VDD 28 G7 4 VDD 29 GND 5 UPDN 30 B0 6 SHLR 31 B1 7 GND 32 B2 8 R0 33 B3 9 R1 34 GND 10 R2 35 B4 11 R3 36 B5 12 GND 37 GND 13 R4 38 B6 14 R5 39 B7 15 GND 40 GND 16 R6 41 4 DCLK 17 R7 42 GND 18 GND 43 DE 19 G0 44 BIST 20 G1 45 GND 21 2 G2 46 GND 22 G3 47 LED_PWM 23 GND 48 LED_EN 24 G4 49 VLED 25 5 G5 50 VLED GND G090VTN02.0 Ver.1.1 19/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 8. Reliability Test Criteria Item A Criterion There is no function defect and occurrence of any new defective shall not be allowed. In case of malfunction defect caused by ESD damage. If it would be recovered to normal B state after resetting, it would be judge as pass. C Image Sticking is not visible through 8% ND filter after 10 mins with pattern L127. Item Package High Temperature Storage Test Module Low Temperature Storage Test Module Test Conditions 80, 300hrs -30, 300hrs Module 50, 90%, 300hrs A Module 75, 300hrs A Module -20, 300hrs A Module 50, 90%, 300hrs A High Temp./High Humidity Storage Test High Temperature Operation Test Low Temperature Operating Test High Temp./High Humidity Operating Test Thermal Shock Non-operation Test Module Shock Test With package Vibration Test With package ESD Test Module Image Sticking test Module Conditions A A -3080;1hr/each cycle, 200cycles Half Sine Wave X,Y, Z 240G,2ms, 1 Times each axis 1.5G, 10~500 Hz , xyz 1 each axis/1h <contact> operate 8kV <Air> operate 15kV 25,chess pattern (5*7) test 8hrs A A A B C Note: 1. In Operating test, the B/L voltage and current must be in spec. 2. All the judgments are under normal temperature and the sample need to be static more than 2 hours in the normal temperature before judge. 3. During measurement, the condensation water or remains shall not be allowed. 4. The minimum sample quantity of test is 3pcs. 5. There is no display function fail issue occurred, all the cosmetic specification is judged before the reliability stress. G090VTN02.0 Ver.1.1 20/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 9. Mechanical Characteristics 9.1 LCM Outline Dimension (Front View) G090VTN02.0 Ver.1.1 21/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 9.2 LCM Outline Dimension (Rear View) G090VTN02.0 Ver.1.1 22/23 Product Specification G090VTN02.0 AU OPTRONICS CORPORATION 10. Label and Packaging 10.1 Shipping Label (on the rear side of TFT-LCD display) 10.2 Carton Package Note: Max. Capacity: 50 LCD Modules/Carton Max. Weight: 15.5Kg / per Carton G090VTN02.0 Ver.1.1 23/23