SPUR GEARS 9 CONTENTS SERIES 101 Acetal : Module 0.5 - 3 p. 103-109 Delrin : Module 0.5 - 3 p. 110-115 Helical Brass/Steel : Module 0.3 - 1 p. 116 Brass : Module 0.3 - 1 p. 117-120 Steel : Module 0.5 - 6 p. 121-149 Stainless Steel : Module p. 150-151 Fax: +44 (0)1992 509890 1-3 101 (R) SPUR GEARS Metric spur gears are available in a range of materials in module sizes from 0.5 to 6.0*. All of the gears in this section have an involute tooth form with a pressure angle of 20. The module sizes quoted in this catalogue are in accordance with DIN780. *Larger modules are available to order. For examples of tooth profiles and geometrical data, see `Technical Information' pages 192 - 194. Material Data for Plastic Gears Mechanical Properties Ts Fiso T max i T max c Dielectric Number Dielectric loss factor Current flow resistance Dielectric strength Creep tracking resistance r Chemical Resistance Electrical Properties Melting Temperature Heat resistance (ISO process A & B) Operating temperature limit (intermittent) Operating temperature limit (continuous) Coefficient of thermal conductivity Specific Heat capacity Linear extension coefficient s R E Hk s, 1000 c tan pD Ed - Delrin Acetal g / cm3 N / mm2 % n / mm2 N / mm2 N / mm2 Opaque Procelain 1.425 70 25-40 3300 170 40 0.34 Opaque Procelain 1.41 65 40 3100 140 40 0.32 C C A/B C C W / Km kJ / kg K 10-5 / grd 175 124 / 70 160 100 0.31 1.5 10 165 100 / 70 150 100 0.31 1.5 10 3.7 0.0005 3.5 0.003 >50 KA 3c >50 KA 3c 0.3 0.5 0.15 b. UV Sensitive 0.3 0.5 0.15 b. UV Sensitive .cm kV / mm Diluted Acid Diluted Alkaline Hydrocarbons (saturated oils/fats) Aromatics Ketones, Esters Chlorinated Hydrocarbons Hot water washing Resistant Other Data 9 Quality Density Tensile Strength Elongation at failure Modulus of Elasticity Hardness Creep strength after 1000 h static load Sliding coefficient of friction* Thermal Properties Symbol / Units Conditionally Resistant Humidity uptake NK 23/50 (sat.) Water uptake (sat.) Max lengthening by humidity in NK 23/50 Combustibility (ASTM-D635 or UL-55) Outdoor exposure Not resistant CWN CWS 1/1N % % % 102 (R) Tel: +44 (0)1992 509888 S P U R G E A R S - A C E TA L * Injection moulded * Machined bores * Pressure angle 20 High strength and low friction coefficient make these gears a popular choice for many applications, including underwater. Material : Acetal Module : 0.5 Thickness (b) : 3mm N (teeth) Overall Dia da 101 281 012 101 281 013 101 281 014 101 281 015 101 281 016 101 281 017 101 281 018 12 13 14 15 16 17 18 7 7.5 8 8.5 9 9.5 10 101 281 019 101 281 020 101 281 021 101 281 022 101 281 023 101 281 024 101 281 025 101 281 026 101 281 027 101 281 028 101 281 030 101 281 032 101 281 035 101 281 036 101 281 038 101 281 040 101 281 042 101 281 045 101 281 048 101 281 050 101 281 052 101 281 054 101 281 055 101 281 056 101 281 060 101 281 064 101 281 065 101 281 070 101 281 072 101 281 075 101 281 080 101 281 090 101 281 096 101 281 100 101 281 120 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 60 64 65 70 72 75 80 90 96 100 120 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 16 17 18.5 19 20 21 22 23.5 25 26 27 28 28.5 29 31 33 33.5 36 37 38.5 41 46 49 51 61 Order Code Fax: +44 (0)1992 509890 Pitch Dia d Hub Dia ND O/A Length L 6 6.5 7 7.5 8 8.5 9 4 4 5 6 6 6 8 7 7 7 10 10 10 10 9.5 10 10.5 11 11.5 12 12.5 13 13.5 14 15 16 17.5 18 19 20 21 22.5 24 25 26 27 27.5 28 30 32 32.5 35 36 37.5 40 45 48 50 60 8 8 8 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 c Bore B - - - - - - - - - - - - - - 2 2 2 3 3 3 4 0.6 0.7 0.9 1.0 1.2 1.3 1.5 0.15 0.17 0.22 0.35 0.36 0.39 0.56 - - - - - - - - - - - - - - - 14.5 16 18.5 19 20 21 22 23 23 24 25 27 29 30 33 36 39 42 44 54 - - - - - - - - - - - 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 1.7 1.8 2.0 2.2 2.4 2.7 2.9 3.1 3.4 3.7 4.2 4.8 5.7 6.1 6.8 7.5 8.3 9.5 10.8 11.8 12.7 13.7 14.2 14.8 16.8 17.9 18.2 19.6 20.1 21.0 22.3 25.0 26.6 27.7 33.2 0.57 0.62 0.66 0.95 0.98 1.04 1.06 1.09 1.14 1.16 1.59 1.68 1.86 1.89 2.00 1.95 2.12 2.20 3.01 2.96 3.12 3.24 3.20 3.40 3.63 4.05 4.00 4.35 4.55 4.66 5.27 5.64 7.05 7.35 10.20 E Torque (Ncm) Weight (g) 9 103 (R) S P U R G E A R S - A C E TA L * Injection moulded * Machined bores * Pressure angle 20 High strength and low friction coefficient make these gears a popular choice for many applications, including underwater. Material : Acetal Module : 0.7 Thickness (b) : 6mm 9 Order Code N (teeth) 101 282 012 101 282 013 101 282 014 101 282 015 101 282 016 101 282 017 101 282 018 101 282 019 101 282 020 101 282 021 101 282 022 101 282 023 101 282 024 101 282 025 101 282 026 101 282 027 101 282 028 101 282 030 101 282 032 101 282 035 101 282 036 101 282 038 101 282 040 101 282 042 101 282 045 101 282 048 101 282 050 101 282 052 101 282 054 101 282 055 101 282 056 101 282 060 101 282 064 101 282 065 101 282 070 101 282 072 101 282 075 101 282 080 101 282 090 101 282 096 101 282 100 101 282 120 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 60 64 65 70 72 75 80 90 96 100 120 Overall Dia da Pitch Dia d Hub Dia ND O/A Length L E c Bore B Torque (Ncm) Weight (g) 9.8 10.5 11.2 11.9 12.6 13.3 14 14.7 15.4 16.1 16.8 17.5 18.2 18.9 19.6 20.3 21 22.4 23.8 25.9 26.6 28 29.4 30.8 32.9 35 36.4 37.8 39.2 39.9 40.6 43.4 46.2 46.9 50.4 51.8 53.9 57.4 64.4 68.6 71.4 85.4 8.4 9.1 9.8 10.5 11.2 11.9 12.6 13.3 14 14.7 15.4 16.1 16.8 17.5 18.2 18.9 19.6 21 22.4 24.5 25.2 26.6 28 29.4 31.5 33.6 35 36.4 37.8 38.5 39.2 42 44.8 45.5 49 50.4 52.5 56 63 67.2 70 84 6 6 6 6 9 9 9 9 9 9 9 9 9 9 9 9 9 12 12 15 15 15 15 18 18 18 18 18 18 18 18 18 18 18 18 18 18 21 21 21 21 21 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 - - - - - - - - - - - - 13.5 13.5 13.5 13.5 13.5 16 16 19 19 21.5 21.5 24.5 24.5 24.5 28 28 28 31 31 31 37.5 37.5 37.5 37.5 37.5 47 56.5 56.5 56.5 77 - - - - - - - - - - - - 3 3 3 3 3 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 2.6 3.1 3.6 4.1 4.7 5.3 5.9 6.6 7.4 8.1 8.9 9.7 10.6 11.5 12.5 13.4 14.5 16.6 18.9 22.6 23.9 26.7 29.6 32.6 37.4 42.6 46.2 50.0 53.9 55.9 58.0 66.0 70.3 71.4 76.9 79.1 82.3 87.7 98.3 100.0 100.0 130.0 0.70 0.80 0.90 1.00 1.30 1.40 1.60 1.70 1.80 1.90 2.10 2.20 2.10 2.20 2.40 2.60 2.80 3.50 4.00 5.40 5.60 5.80 6.20 7.20 8.00 8.60 8.40 9.00 9.70 9.60 10.00 11.40 10.80 11.00 13.40 14.40 15.60 15.60 16.40 20.00 22.40 24.80 104 (R) Tel: +44 (0)1992 509888 S P U R G E A R S - A C E TA L * Injection moulded * Machined bores * Pressure angle 20 High strength and low friction coefficient make these gears a popular choice for many applications, including underwater. Material : Acetal Module : 1.0 Thickness (b) : 9mm N (teeth) Overall Dia da Pitch Dia d Hub Dia ND O/A Length L E c Bore B 101 283 012 101 283 013 101 283 014 101 283 015 101 283 016 101 283 017 101 283 018 12 13 14 15 16 17 18 14 15 16 17 18 19 20 12 13 14 15 16 17 18 9 9 9 9 9 9 9 17 17 17 17 17 17 17 - - - - - - 13.5 - - - - - - 6 4 4 4 4 4 4 4 8.0 9.4 11.1 12.7 14.5 16.3 18.3 1.8 1.9 2.2 2.5 2.8 3.0 3.2 101 283 019 101 283 020 101 283 021 101 283 022 101 283 023 101 283 024 101 283 025 101 283 026 101 283 027 101 283 028 101 283 030 101 283 032 101 283 035 101 283 036 101 283 038 101 283 040 101 283 042 101 283 045 101 283 048 101 283 050 101 283 052 101 283 054 101 283 055 101 283 056 101 283 058 101 283 060 101 283 064 101 283 065 101 283 070 101 283 072 101 283 075 101 283 080 101 283 085 101 283 090 101 283 100 101 283 110 101 283 120 101 283 130 101 283 140 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 58 60 64 65 70 72 75 80 85 90 100 110 120 130 140 21 22 23 24 25 26 27 28 29 30 32 34 37 38 40 42 44 47 50 52 54 56 57 58 60 62 66 67 72 74 77 82 87 92 102 112 122 132 142 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 58 60 64 65 70 72 75 80 85 90 100 110 120 130 140 9 9 12 12 12 15 15 15 15 15 15 18 18 18 18 18 18 18 18 18 21 21 21 21 21 21 21 21 21 21 21 21 21 21 24 24 24 24 24 17 17 17 17 17 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 13.5 13.5 16 16 16 19 19 19 19 22 22 24.5 24.5 28 28 28 28 37 37 37 47 47 47 47 47 47 57 57 57 67 67 67 77 77 87 97 107 115 125 6 6 6 6 6 6 6 6 6 6 6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4 4 5 5 5 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 12 12 12 12 12 20.4 22.6 24.9 27.4 29.9 32.6 35.4 38.3 41.3 44.4 50.9 58.0 69.4 73.4 81.8 90.6 99.9 110 130 140 150 160 170 170 185 200 210 210 230 240 250 260 280 300 340 380 420 460 500 3.5 3.9 4.7 5.1 5.6 6.6 7.2 7.7 8.1 8.4 9.4 11.3 12.7 12.6 14.0 15.6 14.0 17.0 19.8 21.6 21.4 23.5 24.7 25.9 26.8 30.5 29.8 31.0 37.7 33.8 39.1 46.5 48.7 57.5 95.1 82.5 95.2 109.3 127.1 Order Code Fax: +44 (0)1992 509890 Torque (Ncm) Weight (g) 9 105 (R) S P U R G E A R S - A C E TA L * Injection moulded * Machined bores * Pressure angle 20 High strength and low friction coefficient make these gears a popular choice for many applications, including underwater. Material : Acetal Module : 1.25 Thickness (b) : 10mm N (teeth) Overall Dia da Pitch Dia d Hub Dia ND O/A Length L E 101 284 012 101 284 013 101 284 014 101 284 015 101 284 016 101 284 017 101 284 018 12 13 14 15 16 17 18 17.5 18.75 20 21.25 22.5 23.75 25 15 16.25 17.5 18.75 20 21.25 22.5 9 9 9 9 9 9 12 19 19 19 19 19 19 19 - - - 13.5 13.5 13.5 16 - - - 7 7 7 7 5 5 5 5 5 5 5 14.1 16.6 19.2 22.1 25.1 28.4 31.8 2.5 3.0 3.4 3.8 4.3 4.7 6.0 101 284 019 101 284 020 101 284 021 101 284 022 101 284 023 101 284 024 101 284 025 101 284 026 101 284 027 101 284 028 101 284 030 101 284 032 101 284 035 101 284 036 101 284 038 101 284 040 101 284 042 101 284 045 101 284 048 101 284 050 101 284 052 101 284 054 101 284 055 101 284 056 101 284 060 101 284 064 101 284 065 101 284 070 101 284 075 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 60 64 65 70 75 26.25 27.5 28.75 30 31.25 32.5 33.75 35 36.25 37.5 40 42.5 46.25 47.5 50 52.5 55 58.75 62.5 65 67.5 70 71.25 72.5 77.5 82.5 83.75 90 96.25 23.75 25 26.25 27.5 28.75 30 31.25 32.5 33.75 35 37.5 40 43.75 45 47.5 50 52.5 56.25 60 62.5 65 67.5 68.75 70 75 80 81.25 87.5 93.75 12 12 15 15 15 15 15 18 18 18 18 18 18 18 18 18 18 21 21 21 21 21 21 21 21 21 21 21 21 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 16 16 19 19 19 21.5 21.5 24 24 24 28 28 28 37.5 37.5 37.5 37.5 47.5 47.5 47.5 57 57 57 57 67 67 67 77 77 7 7 7 7 7 7 7 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5 5 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 35.5 39.3 43.3 47.6 52.0 56.6 61.4 66.4 71.7 77.1 88.5 100.0 120.0 120.0 140.0 150.0 170.0 190.0 220.0 240.0 260.0 280.0 290.0 300.0 350.0 370.0 370.0 400.0 430.0 6.5 7.0 8.4 9.1 9.9 10.3 11.2 12.5 13.3 13.8 15.0 17.1 20.5 18.8 21.2 24.0 26.7 29.4 24.0 37.1 35.2 38.7 40.3 42.4 45.2 52.0 55.4 60.5 72.5 Order Code 9 106 (R) c Bore B Torque (Ncm) Weight (g) Tel: +44 (0)1992 509888 S P U R G E A R S - A C E TA L * Injection moulded * Machined bores * Pressure angle 20 High strength and low friction coefficient make these gears a popular choice for many applications, including underwater. Material : Acetal Module : 1.5 Thickness (b) : 12mm N (teeth) Overall Dia da Pitch Dia d Hub Dia ND O/A Length L E c Bore B 101 285 012 101 285 013 101 285 014 101 285 015 101 285 016 101 285 017 101 285 018 12 13 14 15 16 17 18 21 22.5 24 25.5 27 28.5 30 18 19.5 21 22.5 24 25.5 27 14 14 14 14 14 14 17 23 23 23 23 23 23 23 - - - - - - - - - - - - - - 6 6 6 6 6 6 8 24.4 28.7 33.3 38.2 43.5 49.1 55.0 5.6 6.3 7.1 7.8 8.7 9.7 10.9 101 285 019 101 285 020 101 285 021 101 285 022 101 285 023 101 285 024 101 285 025 101 285 026 101 285 027 101 285 028 101 285 030 101 285 032 101 285 035 101 285 036 101 285 038 101 285 040 101 285 042 101 285 045 101 285 048 101 285 050 101 285 052 101 285 054 101 285 055 101 285 060 101 285 070 101 285 080 101 285 090 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 60 70 80 90 31.5 33 34.5 36 37.5 39 40.5 42 43.5 45 48 51 55.5 57 60 63 66 70.5 75 78 81 84 85.5 93 108 123 138 28.5 30 31.5 33 34.5 36 37.5 39 40.5 42 45 48 52.5 54 57 60 63 67.5 72 75 78 81 82.5 90 105 120 135 17 17 17 17 17 19 19 19 19 19 24 24 24 24 24 24 24 24 24 27 27 27 27 27 30 30 30 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 - - 23 23 23 27 27 27 27 27 35 35 43 43 43 50 50 50 50 65 65 65 65 65 90 106 118 - - 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 12 12 12 12 12 14 14 14 61.3 67.9 74.9 82.2 89.9 97.9 100.0 110.0 120.0 130.0 150.0 170.0 200.0 220.0 240.0 270.0 290.0 340 390 420 450 490 510 600 780 960 1140 11.9 12.9 13.0 14.3 15.5 16.8 18.3 19.9 21.6 23.3 26.1 29.9 31.2 33.0 37.7 37.4 42.3 49.4 57.2 53.1 58.9 64.8 67.9 83.9 97.7 119.6 149.8 Order Code Fax: +44 (0)1992 509890 Torque (Ncm) Weight (g) 9 107 (R) S P U R G E A R S - A C E TA L * Injection moulded * Machined bores * Pressure angle 20 High strength and low friction coefficient make these gears a popular choice for many applications, including underwater. Material : Acetal Module : 2.0 Thickness (b) : 15mm N (teeth) Order Code 9 101 286 012 101 286 013 101 286 014 101 286 015 101 286 016 101 286 017 101 286 018 101 286 019 101 286 020 101 286 021 101 286 022 101 286 023 101 286 024 101 286 025 101 286 026 101 286 027 101 286 028 101 286 030 101 286 032 101 286 035 101 286 036 101 286 038 101 286 040 101 286 042 101 286 045 101 286 048 101 286 050 101 286 055 101 286 060 101 286 070 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 55 60 70 Overall Dia da 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 64 68 74 76 80 84 88 94 100 104 114 124 144 Pitch Dia d Hub Dia ND O/A Length L E c Bore B 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 60 64 70 72 76 80 84 90 96 100 110 120 140 18.5 18.5 18.5 18.5 17.5 17.5 17.5 17.5 20 20 20 20 24 24 24 24 24 24 26 26 26 26 26 26 30 30 30 30 30 30 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 - - - - 23 25 26 28 29 29 29 36 36 36 40 40 40 46 46 56 56 64 64 64 70 76 80 90 100 110 - - - - 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 14 14 14 14 14 14 108 (R) Torque (Ncm) 54.3 63.8 74.0 84.9 96.6 100.0 120.0 130.0 150.0 160.0 180.0 190.0 210.0 230.0 250.0 270.0 290.0 330.0 380.0 460.0 480.0 540.0 600.0 660.0 740 830 890 1030 1170 1450 Weight (g) 11.6 12.9 14.6 16.4 16.4 17.9 19.3 21.2 24.1 26.7 29.3 32.1 38.7 38.4 38.8 42.1 42.2 50.6 58.6 60.9 65.5 63.9 77.0 87.7 100.6 114.7 116.7 134.8 153.8 195.7 Tel: +44 (0)1992 509888 S P U R G E A R S - A C E TA L * Injection moulded * Machined bores * Pressure angle 20 High strength and low friction coefficient make these gears a popular choice for many applications, including underwater. Material : Acetal Module : 3.0 Thickness (b) : 19mm Order Code 101 288 012 101 288 013 101 288 014 101 288 015 101 288 016 101 288 017 101 288 018 101 288 019 101 288 020 101 288 021 101 288 022 101 288 023 101 288 024 101 288 025 101 288 026 101 288 027 101 288 028 101 288 030 101 288 032 101 288 033 101 288 035 101 288 038 101 288 040 101 288 045 N (teeth) 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 33 35 38 40 45 Fax: +44 (0)1992 509890 Overall Dia da 42 45 48 51 54 57 60 63 66 69 72 75 78 81 84 87 90 96 102 105 111 120 126 141 Pitch Dia d Hub Dia ND O/A Length L E c Bore B Torque (Ncm) Weight (g) 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78 81 84 90 96 99 105 114 120 135 24 24 24 24 24 24 24 24 24 24 24 24 24 28 28 28 28 28 32 32 32 32 32 32 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 - - - 30 30 30 38 38 38 45 45 52 52 58 58 58 68 68 71 71 80 89 95 110 - - - 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 12 12 12 12 12 12 12 12 12 12 12 12 12 14 14 14 14 14 16 16 16 16 16 16 150.0 180.0 210.0 240.0 270.0 310.0 340.0 380.0 430.0 470.0 520.0 560.0 620.0 670.0 720.0 780.0 840.0 960.0 1080.0 1140.0 1260.0 1440.0 1560.0 1860.0 30.2 34.6 39.1 43.1 49.1 54.5 51.7 63.7 69.7 70.2 78.8 79.4 86.9 93.2 102.2 110.9 108.6 129.8 149.9 161.7 169.8 195.5 208.5 255.0 9 109 (R) SPUR GEARS - DELRIN * Milled teeth * Pressure angle 20 Suitable for running temperatures up to 100C with intermittent temperature limit of 160C. For full material data see page 84. Material : Delrin Module : 0.5 Thickness (b) : 4mm 9 Order Code N (teeth) Overall Dia da Pitch Dia d Hub Dia ND Hub Length NL Bore B Torque (Ncm) 101 291 010 101 291 012 101 291 013 101 291 014 101 291 015 101 291 016 101 291 017 101 291 018 101 291 019 101 291 020 101 291 021 101 291 022 101 291 023 101 291 024 101 291 025 101 291 026 101 291 027 101 291 028 101 291 030 101 291 032 101 291 035 101 291 036 101 291 038 101 291 040 101 291 042 101 291 045 101 291 048 101 291 050 101 291 052 101 291 054 101 291 055 101 291 056 101 291 060 101 291 064 101 291 065 101 291 070 101 291 072 101 291 075 101 291 080 101 291 085 101 291 090 101 291 096 101 291 100 101 291 114 101 291 120 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 60 64 65 70 72 75 80 85 90 96 100 114 120 6 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 16 17 18.5 19 20 21 22 23.5 25 26 27 28 28.5 29 31 33 33.5 36 37 38.5 41 43.5 46 49 51 58 61 5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 14 15 16 17.5 18 19 20 21 22.5 24 25 26 27 27.5 28 30 32 32.5 35 36 37.5 40 42.5 45 48 50 57 60 3.5 4 5 5 6 6 6 6 8 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 12 12 12 15 15 15 15 15 15 18 18 18 18 18 18 25 25 25 25 25 25 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 0.6 0.9 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.5 2.7 3.0 3.3 3.6 3.9 4.2 4.5 4.9 5.6 6.4 7.7 8.1 9.0 10.0 11.1 12.7 14.5 15.7 17.0 18.3 19.0 19.7 22.4 23.9 24.2 26.1 26.9 28.0 29.8 31.6 33.4 35.5 36.9 42.1 44.3 110 (R) Weight (g) 0.12 0.18 0.25 0.28 0.28 0.34 0.36 0.42 0.57 0.63 0.66 0.71 0.80 0.80 0.90 1.10 1.10 1.20 1.40 1.60 1.70 1.80 2.10 2.20 2.40 2.70 3.00 3.00 3.80 4.00 4.20 4.30 5.00 6.00 6.30 6.80 7.10 7.70 8.40 11.50 12.20 13.00 14.30 17.60 18.60 Tel: +44 (0)1992 509888 SPUR GEARS - DELRIN * Milled teeth * Pressure angle 20 Suitable for running temperatures up to 100C with intermittent temperature limit of 160C. For full material data see page 84. Material : Delrin Module : 0.7 Thickness (b) : 5mm Order Code N (teeth) Overall Dia da Pitch Dia d 101 292 010 101 292 012 101 292 013 101 292 014 101 292 015 101 292 016 101 292 017 101 292 018 101 292 019 101 292 020 101 292 021 101 292 022 101 292 023 101 292 024 101 292 025 101 292 026 101 292 027 101 292 028 101 292 030 101 292 032 101 292 035 101 292 036 101 292 038 101 292 040 101 292 042 101 292 045 101 292 048 101 292 050 101 292 052 101 292 054 101 292 055 101 292 056 101 292 060 101 292 064 101 292 065 101 292 070 101 292 072 101 292 075 101 292 080 101 292 085 101 292 090 101 292 096 101 292 100 101 292 114 101 292 120 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 60 64 65 70 72 75 80 85 90 96 100 114 120 8.4 9.8 10.5 11.2 11.9 12.6 13.3 14 14.7 15.4 16.1 16.8 17.5 18.2 18.9 19.6 20.3 21 22.4 23.8 25.9 26.6 28 29.4 30.8 32.9 35 36.4 37.8 39.2 39.9 40.6 43.4 46.2 46.9 50.4 51.8 53.9 57.4 60.9 64.4 68.6 71.4 81.2 85.4 7 8.4 9.1 9.8 10.5 11.2 11.9 12.6 13.3 14 14.7 15.4 16.1 16.8 17.5 18.2 18.9 19.6 21 22.4 24.5 25.2 26.6 28 29.4 31.5 33.6 35 36.4 37.8 38.5 39.2 42 44.8 45.5 49 50.4 52.5 56 59.5 63 67.2 70 79.8 84 Fax: +44 (0)1992 509890 Hub Dia ND 5 6 7 8 8 8 8 10 10 10 10 12 12 12 12 12 12 12 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 Hub Length NL Bore B Torque (Ncm) Weight (g) 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 1.5 2.2 2.6 3.0 3.4 3.9 4.4 4.9 5.5 6.1 6.8 7.4 8.1 8.8 9.6 10.4 11.2 12.0 13.8 15.7 18.8 19.9 22.2 24.6 27.2 31.2 35.5 38.5 41.7 44.9 46.6 48.3 55.0 58.6 59.5 64.1 65.9 68.6 73.1 77.4 81.9 87.1 90.5 100.0 100.0 0.30 0.50 0.65 0.85 0.88 0.95 1.00 1.40 1.40 1.50 1.60 2.10 2.10 2.20 2.40 2.50 2.70 2.80 3.60 4.10 4.50 4.70 5.20 5.50 7.10 7.80 8.20 9.00 9.60 9.00 8.50 10.60 12.70 14.40 14.60 16.30 17.00 18.10 20.10 22.20 24.70 29.20 30.50 39.80 43.20 9 111 (R) SPUR GEARS - DELRIN * Milled teeth * Pressure angle 20 Suitable for running temperatures up to 100C with intermittent temperature limit of 160C. For full material data see page 84. Material : Delrin Module : 1.0 Thickness (b) : 10mm 9 Order Code N (teeth) 101 293 010 101 293 011 101 293 012 101 293 013 101 293 014 101 293 015 101 293 016 101 293 017 101 293 018 101 293 019 101 293 020 101 293 021 101 293 022 101 293 023 101 293 024 101 293 025 101 293 026 101 293 027 101 293 028 101 293 030 101 293 032 101 293 035 101 293 036 101 293 038 101 293 040 101 293 042 101 293 045 101 293 048 101 293 050 101 293 052 101 293 054 101 293 055 101 293 056 101 293 060 101 293 064 101 293 065 101 293 070 101 293 072 101 293 075 101 293 080 101 293 085 101 293 090 101 293 096 101 293 100 101 293 120 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 60 64 65 70 72 75 80 85 90 96 100 120 Overall Dia da 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 34 37 38 40 42 44 47 50 52 54 56 57 58 62 66 67 72 74 77 82 87 92 98 102 122 Pitch Dia d 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 60 64 65 70 72 75 80 85 90 96 100 120 Hub Dia ND 8 8 10 10 10 12 12 12 12 15 15 15 15 15 15 15 15 15 15 15 18 18 18 18 18 18 18 20 20 20 20 20 20 25 25 25 25 30 30 50 50 50 50 50 50 112 (R) Hub Length NL Bore B Torque (Ncm) Weight (g) 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 10 10 10 10 10 10 6.2 7.6 9.0 10.6 12.3 14.1 16.1 18.1 20.3 22.7 25.1 27.7 30.4 33.3 36.2 39.3 42.5 45.8 49.3 56.6 64.4 77.1 81.5 90.9 100.0 110.0 120.0 140.0 150.0 170.0 180.0 190.0 190.0 220.0 230.0 240.0 260.0 260.0 280.0 290.0 310.0 330.0 350.0 360.0 440.0 1.0 1.2 1.7 2.0 2.3 2.8 3.2 3.5 4.0 4.9 5.8 6.2 6.5 7.1 7.6 8.2 8.7 9.3 9.9 11.2 13.2 15.4 16.1 17.9 19.6 21.5 24.0 27.8 30.0 32.4 34.6 35.6 36.9 44.1 51.1 52.7 59.6 65.5 71.1 94.7 104.1 113.1 126.1 135.0 182.6 Tel: +44 (0)1992 509888 SPUR GEARS - DELRIN * Milled teeth * Pressure angle 20 Suitable for running temperatures up to 100C with intermittent temperature limit of 160C. For full material data see page 84. Material : Delrin Module : 1.25 Thickness (b) : 10mm Order Code N (teeth) Overall Dia da Pitch Dia d 101 294 010 101 294 012 101 294 014 101 294 015 101 294 018 101 294 020 101 294 024 101 294 025 101 294 030 101 294 032 101 294 035 101 294 036 101 294 038 101 294 040 101 294 050 10 12 14 15 18 20 24 25 30 32 35 36 38 40 50 15 17.5 20 21.25 25 27.5 32.5 33.75 40 42.5 46.25 47.5 50 52.5 65 12.5 15 17.5 18.75 22.5 25 30 31.25 37.5 40 43.75 45 47.5 50 62.5 Hub Dia ND 10 10 12 15 15 15 20 20 20 20 20 20 20 20 20 Hub Length NL Bore B Torque (Ncm) Weight (g) 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 8 8 8 8 8 8 8 8 8 8 8 8 9.8 14.1 19.2 22.1 31.8 39.3 56.6 61.4 88.5 100.0 120.0 120.0 140.0 150.0 240.0 2.1 3.0 4.3 4.7 6.4 7.8 12.7 13.3 18.4 20.4 23.8 24.9 27.7 30.2 45.6 9 Fax: +44 (0)1992 509890 113 (R) SPUR GEARS - DELRIN * Milled teeth * Pressure angle 20 Suitable for running temperatures up to 100C with intermittent temperature limit of 160C. For full material data see page 84. Material : Delrin Module : 1.5 Thickness (b) : 15mm 9 Order Code N (teeth) 101 295 010 101 295 012 101 295 013 101 295 014 101 295 015 101 295 016 101 295 018 101 295 020 101 295 022 101 295 024 101 295 025 101 295 028 101 295 030 101 295 032 101 295 035 101 295 036 101 295 038 101 295 040 101 295 042 101 295 045 101 295 048 101 295 050 101 295 055 101 295 060 101 295 065 101 295 070 101 295 080 101 295 090 101 295 100 101 295 120 10 12 13 14 15 16 18 20 22 24 25 28 30 32 35 36 38 40 42 45 48 50 55 60 65 70 80 90 100 120 Overall Dia da 18 21 22.5 24 25.5 27 30 33 36 39 40.5 45 48 51 55.5 57 60 63 66 70.5 75 78 85.5 93 100.5 108 123 138 153 183 Pitch Dia d 15 18 19.5 21 22.5 24 27 30 33 36 37.5 42 45 48 52.5 54 57 60 63 67.5 72 75 82.5 90 97.5 105 120 135 150 180 Hub Dia ND 12 18 18 18 18 20 20 25 25 25 25 25 30 30 30 30 30 30 35 35 35 35 35 40 40 40 50 50 50 70 114 (R) Hub Length NL Bore B 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 6 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 Torque (Ncm) 21.2 30.5 35.9 41.6 47.8 54.3 68.8 84.9 100.0 120.0 130.0 160.0 190.0 210.0 260.0 270.0 300.0 330.0 370.0 430.0 480.0 530.0 640.0 750.0 820.0 880.0 1000.0 1120.0 1240.0 1490.0 Weight (g) 4.0 6.6 7.6 8.6 9.7 10.7 13.4 18.5 21.6 25.0 26.7 32.7 40.1 44.5 51.9 54.5 59.7 65.8 75.4 85.4 96.1 102.3 122.0 147.4 171.0 195.1 265.1 321.5 393.2 588.3 Tel: +44 (0)1992 509888 SPUR GEARS - DELRIN * Milled teeth * Pressure angle 20 Suitable for running temperatures up to 100C with intermittent temperature limit of 160C. For full material data see page 84. Material : Delrin, Module : Order Code N (teeth) 101 296 010 101 296 012 101 296 015 101 296 018 101 296 020 101 296 024 101 296 025 101 296 030 101 296 040 101 296 045 101 296 050 101 296 060 10 12 15 18 20 24 25 30 40 45 50 60 Material : Delrin, Module : Order Code N (teeth) 101 297 010 101 297 012 101 297 015 101 297 018 101 297 020 101 297 024 101 297 025 101 297 030 101 297 040 101 297 045 101 297 050 101 297 060 10 12 15 18 20 24 25 30 40 45 50 60 Material : Delrin, Module : Order Code N (teeth) 101 298 010 101 298 012 101 298 015 101 298 018 101 298 020 101 298 024 101 298 025 101 298 028 101 298 030 101 298 035 101 298 040 101 298 045 101 298 048 101 298 050 101 298 060 10 12 15 18 20 24 25 28 30 35 40 45 48 50 60 Fax: +44 (0)1992 509890 2.0, Thickness (b) : 16mm Overall Dia da 24 28 34 40 44 52 54 64 84 94 104 124 Pitch Dia d 20 24 30 36 40 48 50 60 80 90 100 120 Hub Dia ND 15 20 20 30 30 30 30 30 50 50 60 60 Hub Length NL Bore B 15 15 15 15 15 15 15 15 15 15 15 15 8 8 12 12 12 12 12 12 12 12 12 12 Hub Length NL Bore B 15 15 15 15 15 15 15 15 20 20 20 20 10 10 12 12 12 12 12 12 15 15 15 20 Hub Length NL Bore B 15 15 15 15 15 15 15 15 15 15 15 15 15 20 20 12 12 12 12 12 12 15 15 15 15 15 20 20 20 20 Torque (Ncm) 40.2 58.0 90.6 130.0 160.0 230.0 250.0 360.0 640.0 810.0 1000.0 1430.0 Weight (g) 8.0 13.9 17.0 32.0 37.3 50.0 53.6 72.7 149.0 177.0 231.0 307.0 2.5, Thickness (b) : 20mm Overall Dia da 30 35 42.5 50 55 65 67.5 80 105 117.5 130 155 Pitch Dia d 25 30 37.5 45 50 60 62.5 75 100 112.5 125 150 Hub Dia ND 20 20 25 30 30 30 40 40 50 50 70 70 Torque (Ncm) 78.6 110.0 170.0 250.0 310.0 450.0 490.0 700.0 1250.0 1590.0 1960.0 2810.0 Weight (g) 15.6 21.7 35.0 53.0 63.0 87.0 105.0 143.0 264.0 322.0 443.0 585.0 9 3.0, Thickness (b) : 25mm Overall Dia da 36 28 34 40 44 52 54 60 64 74 84 94 100 104 124 Pitch Dia d 30 24 30 36 40 48 50 56 60 70 80 90 96 100 120 Hub Dia ND 25 25 25 30 30 30 45 45 45 45 50 50 50 70 70 Torque (Ncm) 140.0 200.0 310.0 450.0 560.0 810.0 880.0 1100.0 1270.0 1730.0 2260.0. 2860.0 3260.0 3540.0 5050.0 Weight (g) 27 38 58 87 106 149 179 217 244 325 424 521 603 708 987 115 (R) SPUR GEARS * 20 Helical interlocking left & right hand * Bores tolerances to H7 * Pressure angle 20 For each module series helical spur gears are always selected in left/right handed pairs. Material : Brass MS 58, Module : Right Hand Order Code N (teeth) Overall Dia da 101 269 012 101 269 015 101 269 018 101 269 020 101 269 024 101 269 030 101 269 512 101 269 515 101 269 518 101 269 520 101 269 524 101 269 530 12 15 18 20 24 30 4.4 5.4 6.4 7.0 8.3 10.2 Material : Brass MS 58, Module : 9 0.3, Thickness (b) : 5mm Left Hand Order Code Pitch Dia d 3.83 4.79 5.75 6.39 7.66 9.58 Hub Dia ND Hub Length NL Bore B Torque (Ncm) Weight (g) 3 4 5 6 7 9 4 4 4 4 4 5 2 2.5 3 3.5 4.5 5 0.76 1.22 1.83 2.31 3.41 5.46 0.5 0.7 1.2 1.4 1.9 4.0 Bore B Torque (Ncm) Weight (g) 10.16 15.91 20.55 29.60 38.95 55.25 6.7 9.6 17.6 24.3 27.0 38.0 0.5, Thickness (b) : 10mm Left Hand Order Code Right Hand Order Code N (teeth) Overall Dia da Pitch Dia d Hub Dia ND Hub Length NL 101 269 218 101 269 222 101 269 225 101 269 230 101 269 234 101 269 240 101 269 718 101 269 722 101 269 725 101 269 730 101 269 734 101 269 740 18 22 25 30 34 40 10.6 12.7 14.3 17.0 19.1 22.3 9.58 11.71 13.3 15.96 18.09 21.28 8 10 12 14 16 18 6 6 6 6 6 8 Material : Steel 9 SMn 28K, Module : 4 6 6 8 8 8 1.0, Thickness (b) : 10mm Left Hand Order Code Right Hand Order Code N (teeth) Overall Dia da Pitch Dia d Hub Dia ND Hub Length NL Bore B Torque (Ncm) Weight (g) 101 214 210 101 214 215 101 214 218 101 214 220 101 214 224 101 214 225 101 214 230 101 214 236 101 214 240 101 214 250 101 214 310 101 214 315 101 214 318 101 214 320 101 214 324 101 214 325 101 214 330 101 214 336 101 214 340 101 214 350 10 15 18 20 24 25 30 36 40 50 12.6 18.0 21.2 23.3 27.5 28.6 33.9 40.3 44.6 55.2 10.64 15.96 19.16 21.28 25.54 26.60 31.93 38.31 42.57 53.21 8 12 12 15 15 15 15 18 18 18 6 6 6 6 6 6 6 6 6 8 4 5 5 5 5 5 5 6 6 6 12.35 29.92 43.09 54.55 78.55 85.23 130 190 238 373 7.3 17.9 24.4 32.5 44.4 47.8 66.9 96.9 118.3 184.4 116 (R) Tel: +44 (0)1992 509888 SPUR GEARS - BRASS * Quality grade 8d (DIN 58405) * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 Material : Brass MS 58 Module : 0.3 Thickness (b) : 2mm Order Code N (teeth) Overall Dia da Pitch Dia d Hub Dia ND Hub Length NL Bore B 101 260 010 101 260 012 101 260 014 101 260 015 101 260 016 101 260 018 101 260 020 101 260 022 101 260 024 101 260 025 101 260 030 101 260 040 101 260 050 101 260 060 101 260 080 101 260 100 101 260 120 10 12 14 15 16 18 20 22 24 25 30 40 50 60 80 100 120 3.6 4.2 4.8 5.1 5.4 6 6.6 7.2 7.8 8.1 9.6 12.6 15.6 18.6 24.6 30.6 36.6 3 3.6 4.2 4.5 4.8 5.4 6 6.6 7.2 7.5 9 12 15 18 24 30 36 3.6 4.2 4.8 5.1 5.4 6 6.6 7.2 7.8 8.1 9.6 10 10 10 15 15 15 3 3 3 3 3 3 3 3 3 3 3 3 5 5 5 5 5 1.0 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.0 3.0 3.0 3.0 3.0 3.0 Fax: +44 (0)1992 509890 Torque (Ncm) 0.11 0.17 0.23 0.26 0.3 0.38 0.47 0.57 0.7 0.7 1.1 1.9 3.0 4.3 7.6 11.9 15.65 Weight (g) 0.1 0.2 0.4 0.5 0.6 0.8 1 1.3 1.4 1.6 2.3 3.5 5.7 6.9 14.7 18.5 23.7 9 117 (R) SPUR GEARS - BRASS * Quality grade 8d (DIN 58405) * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 Material : Brass MS 58 Module : 0.5 Thickness (b) : 2mm 9 Order Code N (teeth) Overall Dia da Pitch Dia d 101 261 010 101 261 012 101 261 013 101 261 014 101 261 015 101 261 016 101 261 017 101 261 018 101 261 019 101 261 020 101 261 021 101 261 022 101 261 023 101 261 024 101 261 025 101 261 026 101 261 027 101 261 028 101 261 030 101 261 032 101 261 035 101 261 036 101 261 038 101 261 040 101 261 042 101 261 045 101 261 048 101 261 050 101 261 052 101 261 054 101 261 055 101 261 056 101 261 060 101 261 064 101 261 065 101 261 070 101 261 072 101 261 075 101 261 080 101 261 085 101 261 090 101 261 096 101 261 100 101 261 114 101 261 120 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 60 64 65 70 72 75 80 85 90 96 100 114 120 6 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 16 17 18.5 19 20 21 22 23.5 25 26 27 28 28.5 29 31 33 33.5 36 37 38.5 41 43.5 46 49 51 58 61 5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 14 15 16 17.5 18 19 20 21 22.5 24 25 26 27 27.5 28 30 32 32.5 35 36 37.5 40 42.5 45 48 50 57 60 Hub Dia ND 4 4 5 5 6 6 7 7 8 8 8 8 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 15 15 25 118 (R) Hub Length NL Bore B Torque (Ncm) Weight (g) 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.3 1.4 1.5 1.7 1.9 2.0 2.2 2.4 2.5 2.9 3.3 4.0 4.2 4.7 5.2 5.8 6.6 7.6 8.2 8.9 9.6 9.9 10.3 11.9 13.5 13.9 16.1 17.1 18.5 21.1 23.8 26.7 30.4 33.0 41.2 43.4 0.5 0.7 1.0 1.1 1.4 1.5 2.0 2.2 2.8 2.8 2.7 3.1 4.1 4.3 4.6 4.4 4.5 4.8 5.2 5.6 7.3 7.7 8.0 8.6 8.9 9.9 10.7 11.4 12.1 13.0 13.2 13.7 15.4 18.7 19.0 21.3 22.4 23.7 26.2 29.1 32.3 36.1 39.4 47.5 62.8 Tel: +44 (0)1992 509888 SPUR GEARS - BRASS * Quality grade 8 d (DIN 58405) * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 Material : Brass MS 58 Module : 0.7 Thickness (b) : 4mm Order Code N (teeth) Overall Dia da Pitch Dia d 101 262 010 101 262 012 101 262 013 101 262 014 101 262 015 101 262 016 101 262 017 101 262 018 101 262 019 101 262 020 101 262 021 101 262 022 101 262 023 101 262 024 101 262 025 101 262 026 101 262 027 101 262 028 101 262 030 101 262 032 101 262 035 101 262 036 101 262 038 101 262 040 101 262 042 101 262 045 101 262 048 101 262 050 101 262 052 101 262 054 101 262 055 101 262 056 101 262 060 101 262 064 101 262 065 101 262 070 101 262 072 101 262 075 101 262 080 101 262 085 101 262 090 101 262 096 101 262 100 101 262 114 101 262 120 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 60 64 65 70 72 75 80 85 90 96 100 114 120 8.4 9.8 10.5 11.2 11.9 12.6 13.3 14 14.7 15.4 16.1 16.8 17.5 18.2 18.9 19.6 20.3 21 22.4 23.8 25.9 26.6 28 29.4 30.8 32.9 35 36.4 37.8 39.2 39.9 40.6 43.4 46.2 46.9 50.4 51.8 53.9 57.4 60.9 64.4 68.6 71.4 81.2 85.4 7 8.4 9.1 9.8 10.5 11.2 11.9 12.6 13.3 14 14.7 15.4 16.1 16.8 17.5 18.2 18.9 19.6 21 22.4 24.5 25.2 26.6 28 29.4 31.5 33.6 35 36.4 37.8 38.5 39.2 42 44.8 45.5 49 50.4 52.5 56 59.5 63 67.2 70 79.8 84 Fax: +44 (0)1992 509890 Hub Dia ND 5 8 8 8 8 9 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 18 18 18 18 20 20 25 25 25 25 Hub Length NL Bore B Torque (Ncm) Weight (g) 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 1.2 1.8 2.1 2.5 2.9 3.3 3.7 4.1 4.6 5.1 5.7 6.2 6.8 7.4 8.0 8.7 9.4 10.1 11.6 13.2 15.8 16.7 18.7 20.7 22.8 26.2 29.8 32.3 35.0 37.7 39.1 40.6 46.6 53.0 54.7 63.4 67.1 72.8 82.9 93.6 100.0 110.0 120.0 160.0 170.0 1.6 3.3 4.0 4.4 4.8 5.8 7.0 6.9 7.4 7.9 10.2 10.7 11.2 12.0 12.6 13.2 13.9 14.7 16.1 17.7 20.0 21.5 22.9 24.3 26.6 29.8 36.5 39.1 41.1 44.4 45.8 47.4 56.0 62.2 63.7 77.8 80.8 87.6 97.7 109.7 119.9 149.6 157.2 192.0 216.7 9 119 (R) SPUR GEARS - BRASS * Quality grade 8 d (DIN 58405) * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 Material : Brass MS 58 Module : 1.0 Thickness (b) : 6.5mm 9 Order Code N (teeth) 101 263 010 101 263 012 101 263 013 101 263 014 101 263 015 101 263 016 101 263 017 101 263 018 101 263 019 101 263 020 101 263 021 101 263 022 101 263 023 101 263 024 101 263 025 101 263 026 101 263 027 101 263 028 101 263 030 101 263 032 101 263 035 101 263 036 101 263 038 101 263 040 101 263 042 101 263 045 101 263 048 101 263 050 101 263 052 101 263 054 101 263 055 101 263 056 101 263 060 101 263 064 101 263 065 101 263 070 101 263 072 101 263 075 101 263 080 101 263 085 101 263 090 101 263 096 101 263 100 101 263 120 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 60 64 65 70 72 75 80 85 90 96 100 120 Overall Dia da 12 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 34 37 38 40 42 44 47 50 52 54 56 57 58 62 66 67 72 74 77 82 87 92 98 102 122 Pitch Dia d 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 60 64 65 70 72 75 80 85 90 96 100 120 Hub Dia ND 8 10 10 10 12 12 12 12 15 15 15 15 15 15 15 15 15 15 15 15 15 15 18 18 18 18 18 18 18 18 18 18 18 18 18 20 20 40 40 40 40 40 50 50 120 (R) Hub Length NL Bore B Torque (Ncm) Weight (g) 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 10 10 10 12 12 12 12 12 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 10 10 4.2 6.1 7.2 8.4 9.6 11.0 12.4 13.9 15.5 17.1 18.9 20.7 22.7 24.7 26.8 29.0 34.3 33.6 38.6 44.0 52.6 55.6 62.0 68.7 75.8 87.0 99.0 100.0 110.0 120.0 120.0 130.0 150.0 170.0 180.0 210.0 220.0 240.0 270.0 310.0 340.0 390.0 420.0 560.0 5.1 8.4 8.7 9.9 12.9 14.2 15.7 17.1 21.8 23.3 27.0 27.1 28.8 31.2 33.1 35.1 37.5 39.9 44.7 50.6 58.9 61.3 72.0 77.5 84.7 99.4 110.4 119.8 127.8 138.3 141.8 146.9 166.6 187.2 195.0 229.2 241.9 335.9 367.5 423.6 466.8 505.6 609.9 806.5 Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel 9 SMn 28K Module : 0.5 Thickness (b) : 4mm Order Code N (teeth) Overall Dia da Pitch Dia d 101 211 010 101 211 012 101 211 013 101 211 014 101 211 015 101 211 016 101 211 017 101 211 018 101 211 019 101 211 020 101 211 021 101 211 022 101 211 023 101 211 024 101 211 025 101 211 026 101 211 027 101 211 028 101 211 030 101 211 032 101 211 035 101 211 036 101 211 038 101 211 040 101 211 042 101 211 045 101 211 048 101 211 050 101 211 052 101 211 054 101 211 055 101 211 056 101 211 060 101 211 064 101 211 065 101 211 070 101 211 072 101 211 075 101 211 080 101 211 085 101 211 090 101 211 096 101 211 100 101 211 114 101 211 120 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 60 64 65 70 72 75 80 85 90 96 100 114 120 6 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 16 17 18.5 19 20 21 22 23.5 25 26 27 28 28.5 29 31 33 33.5 36 37 38.5 41 43.5 46 49 51 58 61 5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 14 15 16 17.5 18 19 20 21 22.5 24 25 26 27 27.5 28 30 32 32.5 35 36 37.5 40 42.5 45 48 50 57 60 Fax: +44 (0)1992 509890 Hub Dia ND 4 4 5 5 6 6 6 6 8 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 25 25 25 25 25 25 Hub Length NL Bore B Torque (Ncm) Weight (g) 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 2 2 2 2 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 0.7 1.1 1.3 1.5 1.7 2.0 2.2 2.5 2.8 3.1 3.4 3.8 4.1 4.5 4.9 5.3 5.7 6.1 7.0 8.0 9.6 10.1 11.3 12.5 13.8 15.9 18.1 19.6 21.2 22.9 23.7 24.6 28.2 32.1 33.1 38.4 40.7 44.1 50.2 56.7 63.6 72.4 78.5 100.0 110.0 0.8 1 1 2 2 2 2 2 3 3 4 4 4 4 5 5 5 6 7 9 10 10 11 12 14 16 18 19 20 22 23 23 30 33 33 39 40 42 47 57 62 69 74 94 100 9 121 (R) SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel 9 SMn 28K Module : 0.7 Thickness (b) : 5mm 9 Order Code N (teeth) Overall Dia da Pitch Dia d 101 212 010 101 212 012 101 212 013 101 212 014 101 212 015 101 212 016 101 212 017 101 212 018 101 212 019 101 212 020 101 212 021 101 212 022 101 212 023 101 212 024 101 212 025 101 212 026 101 212 027 101 212 028 101 212 030 101 212 032 101 212 035 101 212 036 101 212 038 101 212 040 101 212 042 101 212 045 101 212 048 101 212 050 101 212 052 101 212 054 101 212 055 101 212 056 101 212 060 101 212 064 101 212 065 101 212 070 101 212 072 101 212 075 101 212 080 101 212 085 101 212 090 101 212 096 101 212 100 101 212 114 101 212 120 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 60 64 65 70 72 75 80 85 90 96 100 114 120 8.4 9.8 10.5 11.2 11.9 12.6 13.3 14 14.7 15.4 16.1 16.8 17.5 18.2 18.9 19.6 20.3 21 22.4 23.8 25.9 26.6 28 29.4 30.8 32.9 35 36.4 37.8 39.2 39.9 40.6 43.4 46.2 46.9 50.4 51.8 53.9 57.4 60.9 64.4 68.6 71.4 81.2 85.4 7 8.4 9.1 9.8 10.5 11.2 11.9 12.6 13.3 14 14.7 15.4 16.1 16.8 17.5 18.2 18.9 19.6 21 22.4 24.5 25.2 26.6 28 29.4 31.5 33.6 35 36.4 37.8 38.5 39.2 42 44.8 45.5 49 50.4 52.5 56 59.5 63 67.2 70 79.8 84 Hub Dia ND 5 8 8 8 8 10 10 10 10 10 12 12 12 12 15 15 15 15 15 15 15 15 18 18 18 18 18 18 18 18 18 18 18 18 18 18 20 20 20 20 20 25 25 25 25 122 (R) Hub Length NL Bore B Torque (Ncm) Weight (g) 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 1.9 2.7 3.2 3.7 4.3 4.9 5.5 6.2 6.9 7.6 8.4 9.3 10.1 11 12 13 14 15 17.3 19.7 23.5 24.9 27.7 30.7 33.9 38.9 44.3 48.1 52 56.1 58.2 60.3 69.2 78.8 81.3 94.3 99.7 100 120 130 150 170 190 250 270 2 3 4 5 5 6 6 7 8 8 10 11 12 13 16 16 17 18 20 21 24 26 31 33 35 39 43 46 49 53 53 56 63 70 72 83 89 97 108 121 133 157 168 217 239 Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material Module : Steel - Up to 80O 9 SMn 28K Over 80O C45 : 1.0 Thickness (b) : 6.5mm Order Code N (teeth) 101 213 010 101 213 012 101 213 014 101 213 015 101 213 016 101 213 017 101 213 018 101 213 020 101 213 022 101 213 024 101 213 025 101 213 028 101 213 030 101 213 032 101 213 035 101 213 036 101 213 040 101 213 042 101 213 045 101 213 048 101 213 050 101 213 054 101 213 060 101 213 064 101 213 065 101 213 070 101 213 072 101 213 075 101 213 080 101 213 090 101 213 100 101 213 120 10 12 14 15 16 17 18 20 22 24 25 28 30 32 35 36 40 42 45 48 50 54 60 64 65 70 72 75 80 90 100 120 Fax: +44 (0)1992 509890 Overall Dia da 12 14 16 17 18 19 20 22 24 26 27 30 32 34 37 38 42 44 47 50 52 56 62 66 67 72 74 77 82 92 102 122 Pitch Dia d 10 12 14 15 16 17 18 20 22 24 25 28 30 32 35 36 40 42 45 48 50 54 60 64 65 70 72 75 80 90 100 120 Hub Dia ND 8 10 10 12 12 15 15 15 15 15 15 15 15 15 15 15 18 18 18 18 18 18 18 18 18 25 25 40 40 40 40 40 Hub Length NL Bore B 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 10 10 10 12 12 12 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 8 8 8 8 10 10 10 10 Torque (Ncm) 5.1 7.3 10 11.4 13.5 14.7 16.5 20.4 24.7 29.4 31.9 40 45.9 52.2 62.5 66.1 81.7 90 100 110 120 140 180 200 210 250 260 280 690 850 940 1130 Weight (g) 5 8 9 10 13 14 19 22 25 28 30 37 41 46 54 57 71 78 88 103 111 127 155 174 175 219 236 313 342 426 501 674 9 123 (R) SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 1.5 Thickness (b) : 10mm 9 Order Code N (teeth) 101 217 012 101 217 015 101 217 018 101 217 020 101 217 024 101 217 025 101 217 028 101 217 030 101 217 032 101 217 035 101 217 040 101 217 042 101 217 045 101 217 048 101 217 050 101 217 055 101 217 060 101 217 065 101 217 070 101 217 080 12 15 18 20 24 25 28 30 32 35 40 42 45 48 50 55 60 65 70 80 Overall Dia da 21 25.5 30 33 39 40.5 45 48 51 55.5 63 66 70.5 75 78 85.5 93 100.5 108 123 Pitch Dia d 18 22.5 27 30 36 37.5 42 45 48 52.5 60 63 67.5 72 75 82.5 90 97.5 105 120 Hub Dia ND 15 18 22 25 25 25 25 25 25 25 25 25 25 25 25 30 30 45 45 45 124 (R) Hub Length NL Bore B 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 Torque (Ncm) 25.4 39.7 57.2 70.7 100 110 130 150 180 210 280 310 350 400 440 1130 1350 1590 1840 2400 Weight (g) 24 37 61 79 101 110 131 148 164 204 242 267 301 339 382 460 535 742 839 1041 Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 1.0 Thickness (b) : 10mm Order Code N (teeth) 101 214 010 101 214 011 101 214 012 101 214 013 101 214 014 101 214 015 101 214 016 101 214 017 101 214 018 101 214 019 101 214 020 101 214 021 101 214 022 101 214 023 101 214 024 101 214 025 101 214 026 101 214 027 101 214 028 101 214 029 101 214 030 101 214 031 101 214 032 101 214 033 101 214 034 101 214 035 101 214 036 101 214 037 101 214 038 101 214 039 101 214 040 101 214 041 101 214 042 101 214 043 101 214 044 101 214 045 101 214 046 101 214 047 101 214 048 101 214 049 101 214 050 101 214 052 101 214 053 101 214 054 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 52 53 54 Overall Dia da 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 54 55 56 Pitch Dia d 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 52 53 54 Hub Dia ND 8 8 10 10 10 12 12 12 15 15 15 15 15 15 15 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 40 40 40 Hub Length NL Bore B Torque (Ncm) Weight (g) 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 4 4 4 5 5 5 5 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 7.8 9.5 11.3 13.2 15.3 17.6 20.1 22.7 25.4 28.3 31.4 34.6 38 41.5 45.2 49.1 53.1 57.3 61.5 66 70.7 75.5 80.4 85.5 90.8 96.2 100 100 110 110 120 130 130 140 150 150 160 170 180 180 190 210 220 220 7 8 10 11 14 16 18 19 24 26 28 31 33 36 39 46 49 52 55 59 77 80 85 89 92 96 102 106 110 115 120 125 131 134 140 165 171 177 182 188 193 249 254 262 9 Continued Page 126 Fax: +44 (0)1992 509890 125 (R) SPUR GEARS - STEEL Series 101 214 (continued) Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 1.0 Thickness (b) : 10mm 9 Order Code N (teeth) 101 214 055 101 214 056 101 214 057 101 214 058 101 214 060 101 214 062 101 214 064 101 214 065 101 214 068 101 214 070 101 214 072 101 214 074 101 214 075 101 214 076 101 214 078 101 214 080 101 214 082 101 214 083 101 214 085 101 214 087 101 214 090 101 214 095 101 214 100 101 214 110 101 214 114 101 214 120 55 56 57 58 60 62 64 65 68 70 72 74 75 76 78 80 82 83 85 87 90 95 100 110 114 120 Overall Dia da 57 58 59 60 62 64 66 67 70 72 74 76 77 78 80 82 84 85 87 89 92 97 102 112 116 122 Pitch Dia d 55 56 57 58 60 62 64 65 68 70 72 74 75 76 78 80 82 83 85 87 90 95 100 110 114 120 Hub Dia ND 40 40 40 40 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 60 60 60 60 60 126 (R) Hub Length NL Bore B 10 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 Torque (Ncm) 230 240 250 260 280 300 320 330 360 380 400 430 440 450 1010 1070 1120 1150 1200 1260 1310 1380 1440 1590 1650 1730 Weight (g) 269 275 300 307 320 337 352 360 386 401 484 502 510 521 541 560 583 594 611 633 659 795 856 983 1036 1125 Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 1.0 Thickness (b) : 10mm Order Code 101 224 020 101 224 021 101 224 022 101 224 023 101 224 024 101 224 025 101 224 026 101 224 027 101 224 028 101 224 030 101 224 032 101 224 033 101 224 034 101 224 035 101 224 036 101 224 037 101 224 038 101 224 039 101 224 040 101 224 041 101 224 042 101 224 043 101 224 044 101 224 045 101 224 046 101 224 047 101 224 048 101 224 049 101 224 050 101 224 051 101 224 052 101 224 053 101 224 054 101 224 055 101 224 056 101 224 059 101 224 060 101 224 061 101 224 063 101 224 064 101 224 065 101 224 066 101 224 067 101 224 068 N (teeth) 20 21 22 23 24 25 26 27 28 30 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 59 60 61 63 64 65 66 67 68 Overall Dia da 22 23 24 25 26 27 28 29 30 32 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 61 62 63 65 66 67 68 69 70 Pitch Dia d 20 21 22 23 24 25 26 27 28 30 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 59 60 61 63 64 65 66 67 68 Bore B 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Torque (Ncm) 31.4 34.6 38 41.5 45.2 49.1 53.1 57.2 61.7 70.7 80.4 85.5 90.8 96.2 100 100 110 110 120 130 135 140 150 150 160 170 180 180 190 200 210 220 220 230 240 270 280 290 310 320 330 340 350 360 Weight (g) 21 26 26 29 32 35 38 41 44 50 54 61 65 69 74 79 82 87 92 97 101 108 113 116 121 128 133 139 145 152 157 163 170 176 183 204 212 218 234 242 249 260 265 274 9 Continued Page 128 Fax: +44 (0)1992 509890 127 (R) SPUR GEARS - STEEL Series 101 224 (continued) Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 1.0 Thickness (b) : 10mm 9 Order Code N (teeth) Overall Dia da Pitch Dia d Bore B 101 224 069 101 224 070 101 224 071 101 224 072 101 224 073 101 224 075 101 224 076 101 224 077 101 224 078 101 224 079 101 224 080 101 224 082 101 224 084 101 224 085 101 224 090 101 224 092 101 224 096 101 224 100 101 224 105 101 224 110 101 224 114 101 224 120 101 224 124 69 70 71 72 73 75 76 77 78 79 80 82 84 85 90 92 96 100 105 110 114 120 124 71 72 73 74 75 77 78 79 80 81 82 84 86 87 92 94 98 102 107 112 116 122 126 69 70 71 72 73 75 76 77 78 79 80 82 84 85 90 92 96 100 105 110 114 120 124 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 128 (R) Torque (Ncm) 370 380 390 400 410 440 450 460 1010 1040 1070 1120 1180 1200 1310 1340 1390 1440 1520 1590 1650 1730 1790 Weight (g) 283 290 301 309 317 334 343 351 366 373 384 401 423 427 486 508 550 601 662 728 783 870 934 Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 1.25 Thickness (b) : 10mm Order Code N (teeth) Overall Dia da Pitch Dia d 101 216 012 101 216 013 101 216 014 101 216 015 101 216 016 101 216 017 101 216 018 101 216 019 101 216 020 101 216 021 101 216 022 101 216 023 101 216 024 101 216 025 101 216 026 101 216 027 101 216 028 101 216 030 101 216 032 101 216 035 101 216 036 101 216 037 101 216 038 101 216 040 101 216 042 101 216 045 101 216 048 101 216 050 101 216 052 101 216 054 101 216 055 101 216 056 101 216 057 101 216 060 101 216 064 101 216 065 101 216 070 101 216 072 101 216 075 101 216 076 101 216 080 101 216 085 101 216 090 101 216 100 101 216 120 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 37 38 40 42 45 48 50 52 54 55 56 57 60 64 65 70 72 75 76 80 85 90 100 120 17.5 18.75 20 21.25 22.5 23.75 25 26.25 27.5 28.75 30 31.25 32.5 33.75 35 36.25 37.5 40 42.5 46.25 47.5 48.75 50 52.5 55 58.75 62.5 65 67.5 70 71.25 72.5 73.75 77.5 82.5 83.75 90 92.5 96.25 97.5 102.5 108.75 115 127.5 152.5 15 16.25 17.5 18.75 20 21.25 22.5 23.75 25 26.25 27.5 28.75 30 31.25 32.5 33.75 35 37.5 40 43.75 45 46.25 47.5 50 52.5 56.25 60 62.5 65 67.5 68.75 70 71.25 75 80 81.25 87.5 90 93.75 95 100 106.25 112.5 125 150 Fax: +44 (0)1992 509890 Hub Dia ND 12 12 12 15 15 15 15 15 15 15 20 20 20 20 20 20 20 25 25 25 25 25 30 30 30 30 30 30 30 40 40 40 40 40 40 40 40 40 40 50 50 50 50 50 50 Hub Length NL Bore B 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 5 5 5 6 6 6 6 6 6 6 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 Torque (Ncm) 17.6 20.7 24 27.6 31.4 31.4 39.7 44.3 49.1 54.1 59.4 64.9 70.8 76.7 82.9 89.4 96.2 110 120 150 150 160 170 190 210 240 280 300 330 350 370 380 390 440 1070 1100 1280 1350 1470 1510 1670 1880 2040 2260 2710 Weight (g) 19 21 24 30 33 33 40 43 46 50 61 66 70 75 80 88 90 111 121 140 147 154 179 204 218 244 268 291 307 380 392 402 407 444 491 507 566 594 634 712 772 868 938 1119 1537 9 129 (R) SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 1.25 Thickness (b) : 10mm 9 Order Code N (teeth) 101 226 016 101 226 017 101 226 019 101 226 020 101 226 021 101 226 022 101 226 023 101 226 024 101 226 025 101 226 026 101 226 027 101 226 028 101 226 030 101 226 032 101 226 034 101 226 035 101 226 036 101 226 038 101 226 040 101 226 042 101 226 045 101 226 048 101 226 050 101 226 052 101 226 054 101 226 055 101 226 056 101 226 057 101 226 060 101 226 064 101 226 065 101 226 070 101 226 072 101 226 075 101 226 076 101 226 080 101 226 085 101 226 090 101 226 095 101 226 100 101 226 114 101 226 120 16 17 19 20 21 22 23 24 25 26 27 28 30 32 34 35 36 38 40 42 45 48 50 52 54 55 56 57 60 64 65 70 72 75 76 80 85 90 95 100 114 120 Overall Dia da 22.5 23.75 26.25 27.5 28.75 30 31.25 32.5 33.75 35 36.25 37.5 40 42.5 45 46.25 47.5 50 52.5 55 58.75 62.5 65 67.5 70 71.25 72.5 73.75 77.5 82.5 83.75 90 92.5 96.25 97.5 102.5 108.75 115 121.25 127.5 145 152.5 Pitch Dia d Bore B 20 21.25 23.75 25 26.25 27.5 28.75 30 31.25 32.5 33.75 35 37.5 40 42.5 43.75 45 47.5 50 52.5 56.25 60 62.5 65 67.5 68.75 70 71.25 75 80 81.25 87.5 90 93.75 95 100 106.25 112.5 118.75 125 142.5 150 6 6 6 6 6 6 6 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 15 15 20 130 (R) Torque (Ncm) 31.4 35.4 44.3 49.1 54.1 59.4 64.9 70.7 76.7 82.9 89.4 96.2 110 120 140 150 156.7 170 190 210 240 280 300 330 350 370 380 390 440 1070 1100 1280 1350 1470 1510 1674.4 1880 2040 2160 2260 2580 2710 Weight (g) 21 25 32 35 40 43 48 50 55 59 64 70 81 90 103 109 117 129 144 159 184 209 229 250 267 278 291 300 334 384 396 460 488 525 540 601 679 758 842 940 1220 1335 Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 1.5 Thickness (b) : 15mm Order Code N (teeth) 101 218 012 101 218 013 101 218 014 101 218 015 101 218 016 101 218 017 101 218 018 101 218 019 101 218 020 101 218 021 101 218 022 101 218 023 101 218 024 101 218 025 101 218 026 101 218 027 101 218 028 101 218 030 101 218 031 101 218 032 101 218 034 101 218 035 101 218 036 101 218 038 101 218 040 101 218 042 101 218 044 101 218 045 101 218 046 101 218 048 101 218 050 101 218 052 101 218 054 101 218 055 101 218 056 101 218 057 101 218 058 101 218 060 101 218 062 101 218 063 101 218 064 101 218 065 101 218 068 101 218 070 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 31 32 34 35 36 38 40 42 44 45 46 48 50 52 54 55 56 57 58 60 62 63 64 65 68 70 Overall Dia da 21 22.5 24 25.5 27 28.5 30 31.5 33 34.5 36 37.5 39 40.5 42 43.5 45 48 49.5 51 54 55.5 57 60 63 66 69 70.5 72 75 78 81 84 85.5 87 88.5 90 93 96 97.5 99 100.5 105 108 Pitch Dia d 18 19.5 21 22.5 24 25.5 27 28.5 30 31.5 33 34.5 36 37.5 39 40.5 42 45 46.5 48 51 52.5 54 57 60 63 66 67.5 69 72 75 78 81 82.5 84 85.5 87 90 93 94.5 96 97.5 102 105 Hub Dia ND 15 15 15 18 20 20 22 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 40 40 40 40 40 40 40 40 50 50 50 50 50 50 50 60 60 60 60 60 60 60 Hub Length NL Bore B Torque (Ncm) Weight (g) 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 20 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 38.1 44.8 51.9 59.85 67.8 76.6 85.9 95.7 100 110 120 140 150 160 170 190 200 230 250 270 300 320 340 380 420 460 510 530 560 610 660 1520 1640 1700 1770 1830 1900 2030 2170 2240 2310 2380 2610 2760 32 37 42 49 60 66 79 95 103 128 136 145 154 166 175 185 198 246 259 273 298 317 392 422 454 488 523 541 560 599 721 765 810 831 855 880 905 1041 1096 1122 1148 1172 1254 1423 9 Continued Page 132 Fax: +44 (0)1992 509890 131 (R) SPUR GEARS - STEEL Series 101 218 (continued) Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 1.5 Thickness (b) : 15mm Order Code N (teeth) 101 218 072 101 218 074 101 218 075 101 218 076 101 218 078 101 218 080 101 218 082 101 218 085 101 218 090 101 218 095 101 218 100 101 218 114 101 218 120 120 74 75 76 78 80 82 85 90 95 100 114 120 Overall Dia da 111 114 115.5 117 120 123 126 130.5 138 145.5 153 174 183 Pitch Dia d 108 111 112.5 114 117 120 123 127.5 135 142.5 150 171 180 Hub Dia ND 70 70 70 70 70 70 70 70 70 70 70 70 70 Hub Length NL Bore B 20 20 20 20 20 20 20 20 20 20 20 20 20 12 12 12 15 15 15 15 15 15 15 15 20 20 Torque (Ncm) 2920 3090 3170 3260 3430 3610 3790 4080 4420 4670 4890 5570 5860 Weight (g) 1683 1716 1726 1746 1782 1878 1941 2038 2221 2398 2620 3166 3468 9 132 (R) Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 1.5 Thickness (b) : 15mm Order Code 101 228 020 101 228 021 101 228 023 101 228 024 101 228 025 101 228 026 101 228 027 101 228 028 101 228 029 101 228 030 101 228 032 101 228 033 101 228 035 101 228 037 101 228 038 101 228 039 101 228 040 101 228 041 101 228 043 101 228 045 101 228 047 101 228 048 101 228 049 101 228 050 101 228 051 101 228 052 101 228 053 101 228 054 101 228 055 101 228 056 101 228 059 101 228 060 101 228 061 101 228 064 101 228 065 101 228 067 101 228 069 101 228 070 101 228 071 101 228 072 101 228 073 101 228 075 N (teeth) 20 21 23 24 25 26 27 28 29 30 32 33 35 37 38 39 40 41 43 45 47 48 49 50 51 52 53 54 55 56 59 60 61 64 65 67 69 70 71 72 73 75 Overall Dia da 33 34.5 37.5 39 40.5 42 43.5 45 46.5 48 51 52.5 55.5 58.5 60 61.5 63 64.5 67.5 70.5 73.5 75 76.5 78 79.5 81 82.5 84 85.5 87 91.5 93 94.5 99 100.5 103.5 106.5 108 109.5 111 112.5 115.5 Pitch Dia d Bore B 30 31.5 34.5 36 37.5 39 40.5 42 43.5 45 48 49.5 52.5 55.5 57 58.5 60 61.5 64.5 67.5 70.5 72 73.5 75 76.5 78 79.5 81 82.5 84 88.5 90 91.5 96 97.5 100.5 103.5 105 106.5 108 109.5 112.5 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 Torque (Ncm) 100 110.0 140.0 150.0 160.0 170.0 190.0 200.0 220.0 230.0 270.0 280.0 320.0 360.0 380.0 400.0 420.0 440.0 490.0 530.0 580.0 610.0 630.0 660.0 680.0 1520.0 1580.0 1640.0 1700.0 1770.0 1960.0 2030.0 2100.0 2310.0 2380.0 2530.0 2680.0 2760.0 2840.0 2920.0 3000.0 3170.0 Weight (g) 75.0 83 101 110 120 131 141 149 161 174 199 212 240 267 284 300 316 336 367 403 441 460 480 500 525 545 574 585 607 629 702 726 752 832 850 909 996 990 1022 1051 182 1146 9 Continued Page 134 Fax: +44 (0)1992 509890 133 (R) SPUR GEARS - STEEL Series 101 228 (continued) Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 1.5 Thickness (b) : 15mm 9 Order Code N (teeth) 101 228 076 101 228 077 101 228 079 101 228 080 101 228 081 101 228 083 101 228 084 101 228 085 101 228 086 101 228 087 101 228 088 101 228 089 101 228 090 101 228 091 101 228 092 101 228 093 101 228 094 101 228 095 101 228 096 101 228 100 101 228 110 101 228 114 101 228 120 76 77 120 80 81 83 84 85 86 87 88 89 90 91 92 93 94 95 96 100 110 114 120 Overall Dia da 117 118.5 121.5 123 124.5 127.5 129 130.5 132 133.5 135 136.5 138 139.5 141 142.5 144 145.5 147 153 168 174 183 Pitch Dia d Bore B 114 115.5 118.5 120 121.5 124.5 126 127.5 129 130.5 132 133.5 135 136.5 138 139.5 141 142.5 144 150 165 171 180 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 134 (R) Torque (Ncm) 3260.0 3340.0 3520.0 3610.0 3700.0 3890.0 3980.0 4080.0 4170.0 4270.0 4330.0 4380.0 4420.0 4470.0 4520.0 4570.0 4620.0 4670.0 4700.0 4890.0 5370.0 5570.0 5860.0 Weight (g) 1166 1197 1263 1298 1335 1395 1454 1455 1495 1529 1576 1611 1659 1687 1724 1755 1797 1825 1878 2048 2465 2647 2939 Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 2.0 Thickness (b) : 16mm Order Code N (teeth) 101 231 010 101 231 012 101 231 013 101 231 014 101 231 015 101 231 016 101 231 017 101 231 018 101 231 019 101 231 020 101 231 021 101 231 022 101 231 023 101 231 024 101 231 025 101 231 026 101 231 027 101 231 028 101 231 029 101 231 030 101 231 031 101 231 032 101 231 034 101 231 035 101 231 036 101 231 037 101 231 038 101 231 040 101 231 042 101 231 044 101 231 045 101 231 046 101 231 047 101 231 048 101 231 050 101 231 052 101 231 053 101 231 054 101 231 055 101 231 056 101 231 057 101 231 058 101 231 059 101 231 060 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 34 35 36 37 38 40 42 44 45 46 47 48 50 52 53 54 55 56 57 58 59 60 Overall Dia da 24 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 72 74 76 78 80 84 88 92 94 96 98 100 104 108 110 112 114 116 118 120 122 124 Pitch Dia d 20 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 68 70 72 74 76 80 84 88 90 92 94 96 100 104 106 108 110 112 114 116 118 120 Hub Dia ND 15 20 20 25 25 25 25 30 30 30 30 30 30 30 30 35 35 35 35 40 40 40 40 45 45 45 45 50 50 50 50 50 50 50 50 60 60 60 60 60 70 70 70 70 Hub Length NL Bore B 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 8 10 10 10 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 Torque (Nm) 0.50 0.72 0.85 0.98 1.10 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.10 3.30 3.60 3.90 4.20 4.50 4.80 5.10 5.80 6.10 6.50 6.80 15.40 17.10 18.80 20.70 21.60 22.60 23.60 24.60 26.70 28.90 30.00 31.20 32.30 33.50 34.70 36.00 37.20 38.50 Weight (g) 45.0 70 81 110 114 126 139 179 192 207 224 240 257 275 295 344 364 386 409 466 489 514 566 632 659 689 720 825 891 955 991 1025 1055 1098 1174 1357 1396 1442 1485 1527 1688 1737 1784 1827 9 Continued Page 136 Fax: +44 (0)1992 509890 135 (R) SPUR GEARS - STEEL Series 101 231 (continued) Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 2.0 Thickness (b) : 16mm 9 Order Code N (teeth) 101 231 062 101 231 063 101 231 064 101 231 065 101 231 067 101 231 068 101 231 070 101 231 072 101 231 074 101 231 075 101 231 076 101 231 078 101 231 080 101 231 085 101 231 090 101 231 095 101 231 100 101 231 110 101 231 114 101 231 120 120 63 64 65 67 68 70 72 74 75 76 78 80 85 90 95 100 110 114 120 Overall Dia da 128 130 132 134 138 140 144 148 152 154 156 160 164 174 184 194 204 224 232 244 Pitch Dia d 124 126 128 130 134 136 140 144 148 150 152 156 160 170 180 190 200 220 228 240 Hub Dia ND 70 70 70 70 70 70 70 80 80 80 80 80 80 80 80 100 100 100 100 100 136 (R) Hub Length NL Bore B Torque (Nm) Weight (g) 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 12 12 12 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 41.10 42.50 43.80 45.20 48.00 49.50 52.40 55.50 58.60 60.20 61.80 65.10 68.50 77.30 83.90 88.60 92.70 102.00 105.70 111.20 1929 1969 2028 2194 2306 2360 2463 2769 2883 2945 2982 3129 3196 3513 3875 4652 5056 5856 6179 6822 Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 2.0 Thickness (b) : 16mm Order Code 101 241 018 101 241 020 101 241 021 101 241 022 101 241 023 101 241 024 101 241 025 101 241 026 101 241 027 101 241 028 101 241 030 101 241 032 101 241 035 101 241 036 101 241 037 101 241 038 101 241 039 101 241 040 101 241 041 101 241 042 101 241 043 101 241 045 101 241 047 101 241 048 101 241 049 101 241 050 101 241 051 101 241 052 101 241 053 101 241 054 101 241 055 101 241 056 101 241 057 101 241 060 101 241 061 101 241 063 101 241 064 101 241 065 101 241 067 101 241 070 101 241 072 101 241 075 N (teeth) 18 20 21 22 23 24 25 26 27 28 30 32 35 36 37 38 39 40 41 42 43 45 47 48 49 50 51 52 53 54 55 56 57 60 61 63 64 65 67 70 72 75 Overall Dia da 40 44 46 48 50 52 54 56 58 60 64 68 74 76 78 80 82 84 86 88 90 94 98 100 102 104 106 108 110 112 114 116 118 124 126 130 132 134 138 144 148 154 Pitch Dia d 36 40 42 44 46 48 50 52 54 56 60 64 70 72 74 76 78 80 82 84 86 90 94 96 98 100 102 104 106 108 110 112 114 120 122 126 128 130 134 140 144 150 Bore B Torque (Nm) Weight (g) 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 1.6 2.0 2.2 2.4 2.6 2.8 3.1 3.3 3.6 3.9 4.5 5.1 6.1 6.5 6.8 15.4 16.2 17.1 18.0 18.8 19.8 21.6 23.6 24.6 25.7 26.7 27.8 28.9 30.0 31.2 32.3 33.5 34.7 38.5 39.8 42.5 13.8 45.2 48.0 52.4 55.5 60.2 108 138 154 170 187 206 225 244 265 286 330 380 457 486 514 545 578 605 639 668 703 773 843 879 921 954 995 1038 1092 1124 1153 1208 1249 1385 1443 1530 1576 1625 1733 1886 1988 2178 9 Continued Page 138 Fax: +44 (0)1992 509890 137 (R) SPUR GEARS - STEEL Series 101 241 (continued) Material : Steel - Up to 80O 9 SMn 28K Over 80O C45 Module : 2.0 Thickness (b) : 16mm Order Code N (teeth) 101 241 076 101 241 078 101 241 080 101 241 085 101 241 090 101 241 095 101 241 096 101 241 100 101 241 114 101 241 120 76 78 120 85 90 95 96 100 114 120 Overall Dia da 156 160 164 174 184 194 196 204 232 244 Pitch Dia d 152 156 160 170 180 190 192 200 228 240 Bore B Torque (Nm) Weight (g) 15 15 20 20 20 20 20 20 20 20 61.8 65.1 68.5 77.3 83.9 88.6 89.2 92.7 105.7 111.2 2229 2358 2458 2782 3134 3493 3556 3870 5052 5585 9 138 (R) Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel C45 Module : 2.5 Thickness (b) : 20mm Order Code N (teeth) 101 232 012 101 232 013 101 232 014 101 232 015 101 232 016 101 232 017 101 232 018 101 232 019 101 232 020 101 232 021 101 232 022 101 232 023 101 232 024 101 232 025 101 232 026 101 232 027 101 232 028 101 232 030 101 232 032 101 232 034 101 232 035 101 232 036 101 232 038 101 232 040 101 232 042 101 232 045 101 232 046 101 232 048 101 232 050 101 232 052 101 232 054 101 232 055 101 232 056 101 232 060 101 232 062 101 232 065 101 232 070 101 232 072 101 232 075 101 232 080 101 232 082 101 232 085 101 232 090 101 232 092 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 34 35 36 38 40 42 45 46 48 50 52 54 55 56 60 62 65 70 72 75 80 82 85 90 92 Overall Dia da 35 37.5 40 42.5 45 47.5 50 52.5 55 57.5 60 62.5 65 67.5 70 72.5 75 80 85 90 92.5 95 100 105 110 117.5 120 125 130 135 140 142.5 145 155 160 167.5 180 185 192.5 205 210 217.5 230 235 Pitch Dia d 30 32.5 35 37.5 40 42.5 45 47.5 50 52.5 55 57.5 60 62.5 65 67.5 70 75 80 85 87.5 90 95 100 105 112.5 115 120 125 130 135 137.5 140 150 155 162.5 175 180 187.5 200 205 212.5 225 230 Hub Dia ND 20 20 20 25 25 25 30 30 30 30 30 40 40 40 40 40 40 40 50 50 50 60 60 60 60 60 60 60 70 70 70 70 70 70 70 80 80 80 90 90 90 100 100 100 Hub Length NL Bore B Torque (Nm) Weight (kg) 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 3.0 3.5 4.1 4.7 5.3 6.0 6.7 7.5 8.3 9.2 10.1 11.0 12.0 13.0 14.1 15.2 16.4 18.8 21.4 24.1 25.6 27.1 30.2 33.4 36.9 42.3 44.2 48.1 52.2 56.5 60.9 63.2 65.6 75.3 80.4 88.3 102.5 108.4 117.6 133.8 140.6 151.1 163.9 167.6 0.11 0.12 0.14 0.19 0.21 0.23 0.29 0.31 0.34 0.38 0.41 0.51 0.54 0.58 0.62 0.66 0.70 0.79 0.95 1.04 1.10 1.25 1.38 1.60 1.72 1.92 1.98 2.14 2.43 2.60 2.73 2.78 2.89 3.24 3.43 3.90 4.44 4.62 5.19 5.79 6.05 6.69 7.31 7.60 9 Continued Page 140 Fax: +44 (0)1992 509890 139 (R) SPUR GEARS - STEEL Series 101 232 (continued) Material : Steel C45 Module : 2.5 Thickness (b) : 20mm Order Code N (teeth) 101 232 095 101 232 100 101 232 110 101 232 114 101 232 120 101 232 127 120 100 110 114 120 127 Overall Dia da 242.5 255 280 290 305 322.5 Pitch Dia d 237.5 250 275 285 300 317.5 Hub Dia ND 100 100 120 120 120 120 Hub Length NL Bore B Torque (Nm) Weight (kg) 20 20 20 20 20 20 20 25 25 25 25 25 173.0 181.1 199.2 206.4 217.3 230 7.97 8.74 10.86 11.61 12.64 13.96 9 140 (R) Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel C45 Module : 2.5 Thickness (b) : 20mm Order Code N (teeth) 101 242 022 101 242 023 101 242 024 101 242 025 101 242 026 101 242 029 101 242 030 101 242 031 101 242 033 101 242 034 101 242 035 101 242 037 101 242 039 101 242 040 101 242 041 101 242 043 101 242 044 101 242 045 101 242 047 101 242 049 101 242 050 101 242 051 101 242 053 101 242 054 101 242 055 101 242 056 101 242 057 101 242 060 101 242 070 101 242 076 101 242 080 101 242 090 101 242 100 101 242 114 101 242 120 22 23 24 25 26 29 30 31 33 34 35 37 39 40 41 43 44 45 47 49 50 51 53 54 55 56 57 60 70 76 80 90 100 114 120 Fax: +44 (0)1992 509890 Overall Dia da 60 62.5 65 67.5 70 77.5 80 82.5 87.5 90 92.5 97.5 102.5 105 107.5 112.5 115 117.5 122.5 127.5 130 132.5 137.5 140 142.5 145 147.5 155 180 195 205 230 255 290 305 Pitch Dia d Bore B Torque (Nm) Weight (kg) 55 57.5 60 62.5 65 72.5 75 77.5 82.5 85 87.5 92.5 97.5 100 102.5 107.5 110 112.5 117.5 122.5 125 127.5 132.5 135 137.5 140 142.5 150 175 190 200 225 250 285 300 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 25 25 10.1 11.0 12.0 13.0 14.1 17.5 18.8 20.1 22.7 24.1 25.6 28.6 31.8 33.4 35.1 38.6 40.4 42.3 46.2 50.2 52.2 54.4 58.7 60.9 63.2 65.6 67.9 75.3 102.5 120.8 133.8 163.9 181.1 206.4 217.3 0.34 0.37 0.41 0.45 0.49 0.61 0.66 0.70 0.79 0.84 0.89 1.00 1.12 1.18 1.24 1.38 1.43 1.50 1.64 1.79 1.86 1.94 2.10 2.17 2.25 2.33 2.43 2.69 3.68 4.35 4.83 6.13 7.62 9.80 10.94 9 141 (R) SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel C45 Module : 3.0 Thickness (b) : 25mm 9 Order Code N (teeth) 101 233 012 101 233 013 101 233 014 101 233 015 101 233 016 101 233 017 101 233 018 101 233 019 101 233 020 101 233 021 101 233 022 101 233 023 101 233 024 101 233 025 101 233 026 101 233 027 101 233 028 101 233 030 101 233 032 101 233 035 101 233 036 101 233 038 101 233 040 101 233 042 101 233 045 101 233 048 101 233 050 101 233 052 101 233 054 101 233 055 101 233 056 101 233 057 101 233 058 101 233 060 101 233 065 101 233 067 101 233 070 101 233 072 101 233 075 101 233 076 101 233 080 101 233 090 101 233 100 101 233 114 101 233 120 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 45 48 50 52 54 55 56 57 58 60 65 67 70 72 75 76 80 90 100 114 120 Overall Dia da 42 45 48 51 54 57 60 63 66 69 72 75 78 81 84 87 90 96 102 111 114 120 126 132 141 150 156 162 168 171 174 177 180 186 201 207 216 222 231 234 246 276 306 348 366 Pitch Dia d 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78 81 84 90 96 105 108 114 120 126 135 144 150 156 162 165 168 171 174 180 195 201 210 216 225 228 240 270 300 342 360 Hub Dia ND 25 25 25 35 35 35 45 45 45 45 45 50 50 50 50 50 50 50 60 60 60 60 70 70 70 80 80 80 80 80 90 90 90 90 90 90 90 100 100 100 100 100 100 100 100 142 (R) Hub Length NL Bore B Torque (Nm) Weight (kg) 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 12 12 12 12 12 12 12 12 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 30 30 30 30 30 5.4 6.3 7.3 8.4 9.6 10.8 12.1 13.5 15.0 16.6 18.2 19.9 21.6 23.5 25.4 27.4 29.5 33.8 38.5 46.1 48.7 54.3 60.2 66.4 76.2 86.7 94.1 101.8 109.7 113.9 118.0 122.3 126.6 135.5 159.0 169.0 184.5 195.1 211.8 217.4 240.9 25.1 326.0 371.6 391.2 0.21 0.24 0.28 0.37 0.41 0.46 0.58 0.63 0.67 0.72 0.78 0.89 0.95 1.01 1.08 1.16 1.19 1.35 1.62 1.90 2.00 2.30 2.67 2.89 3.26 3.84 4.10 4.39 4.66 4.82 5.18 5.33 5.49 5.83 6.67 7.04 7.64 8.22 8.87 8.94 9.77 12.12 14.72 18.79 21.00 Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel C45 Module : 3.0 Thickness (b) : 25mm Order Code N (teeth) 101 243 020 101 243 021 101 243 024 101 243 025 101 243 028 101 243 030 101 243 035 101 243 037 101 243 038 101 243 040 101 243 042 101 243 045 101 243 046 101 243 047 101 243 048 101 243 050 101 243 052 101 243 053 101 243 056 101 243 058 101 243 060 101 243 065 101 243 067 101 243 070 101 243 072 101 243 076 101 243 080 101 243 090 101 243 096 101 243 100 101 243 114 20 21 24 25 28 30 35 37 38 40 42 45 46 47 48 50 52 53 56 58 60 65 67 70 72 76 80 90 96 100 114 Fax: +44 (0)1992 509890 Overall Dia da 66 69 78 81 90 96 111 117 120 126 132 141 144 147 150 156 162 165 174 180 186 201 207 216 222 234 246 276 294 306 348 Pitch Dia d 60 63 72 75 84 90 105 111 114 120 126 135 138 141 144 150 156 159 168 174 180 195 201 210 216 228 240 270 288 300 342 Bore B Torque (Nm) Weight (kg) 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 30 30 30 30 30 30 15.0 16.6 21.6 23.5 29.5 33.8 46.1 51.5 54.3 60.2 66.4 76.2 79.6 83.1 86.7 94.1 101.8 105.7 118.0 126.6 135.5 159.0 169.0 184.0 195.1 217.4 240.9 295.1 313.7 326.0 371.6 0.50 0.55 0.74 0.81 1.02 1.15 1.61 1.80 1.91 2.11 2.34 2.70 2.81 2.95 3.09 3.34 3.64 3.78 4.23 4.54 4.87 5.72 6.09 6.67 6.99 7.80 8.63 11.00 12.53 13.61 17.72 9 143 (R) SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel C45 Module : 4.0 Thickness (b) : 30mm 9 Order Code N (teeth) 101 234 012 101 234 013 101 234 014 101 234 015 101 234 016 101 234 017 101 234 018 101 234 019 101 234 020 101 234 021 101 234 022 101 234 023 101 234 024 101 234 025 101 234 026 101 234 027 101 234 028 101 234 030 101 234 032 101 234 035 101 234 036 101 234 038 101 234 040 101 234 042 101 234 044 101 234 045 101 234 046 101 234 048 101 234 050 101 234 052 101 234 054 101 234 055 101 234 056 101 234 058 101 234 060 101 234 065 101 234 067 101 234 070 101 234 072 101 234 075 101 234 076 101 234 080 101 234 090 101 234 096 101 234 100 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 42 44 45 46 48 50 52 54 55 56 58 60 65 67 70 72 75 76 80 90 96 120 Overall Dia da 56 60 64 68 72 76 80 84 88 92 96 100 944 108 112 116 120 128 136 148 152 160 168 176 184 188 192 200 208 216 224 228 232 240 248 268 276 288 296 308 312 328 368 392 408 Pitch Dia d 48 52 56 60 64 68 72 76 80 84 88 92 936 100 104 108 112 120 128 140 144 152 160 168 176 180 184 192 200 208 216 220 224 232 240 260 268 280 288 300 304 320 360 384 400 Hub Dia ND 35 35 40 40 40 40 50 50 50 50 50 50 60 60 60 60 60 70 70 70 70 70 80 80 80 80 80 100 100 100 100 100 100 100 100 100 100 100 100 100 120 120 120 120 120 144 (R) Hub Length NL Bore B Torque (Nm) Weight (kg) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 11.5 13.5 15.7 18.0 20.5 23.2 26.0 28.9 32.1 35.4 38.8 42.4 46.2 500.2 54.3 58.5 62.9 72.2 82.2 98.4 104.1 115.9 128.5 141.6 155.5 162.6 169.9 185.0 200.8 217.2 234.2 242.9 251.9 270.2 289.1 339.3 360.5 393.6 416.4 451.8 463.9 514.1 629.6 669.2 695.5 0.48 0.55 0.68 0.76 0.80 0.90 1.11 1.21 1.33 1.45 1.58 1.70 1.98 2.12 2.28 2.43 2.58 3.08 3.44 3.97 4.18 4.61 5.27 5.77 6.24 6.52 6.79 7.78 8.36 8.96 9.50 10.00 10.50 11.00 11.50 13.50 14.00 15.30 16.00 17.50 18.38 20.00 25.20 28.50 31.00 Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel C45 Module : 4.0 Thickness (b) : 30mm Order Code 101 244 020 101 244 024 101 244 025 101 244 030 101 244 035 101 244 036 101 244 037 101 244 038 101 244 040 101 244 042 101 244 045 101 244 046 101 244 047 101 244 048 101 244 050 101 244 052 101 244 056 101 244 060 101 244 065 101 244 067 101 244 070 101 244 076 101 244 080 101 244 090 101 244 096 N (teeth) 20 24 25 30 35 36 37 38 40 42 45 46 47 48 50 52 56 60 65 67 70 76 80 90 96 Fax: +44 (0)1992 509890 Overall Dia da 88 104 108 128 148 152 156 160 168 176 188 192 196 200 208 216 232 248 268 276 288 312 328 368 392 Pitch Dia d 80 96 100 120 140 144 148 152 160 168 180 184 188 192 200 208 224 240 260 268 280 304 320 360 384 Bore B Torque (Nm) Weight (kg) 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 30 32.1 46.2 50.2 72.2 98.4 104.1 109.9 115.9 128.5 141.6 162.6 169.9 177.4 185.0 200.8 217.2 251.9 289.1 339.3 360.5 393.6 463.9 514.1 629.6 669.2 1.07 1.59 1.73 2.49 3.44 3.55 3.86 4.04 4.55 5.02 5.78 6.08 6.34 6.62 7.18 7.78 9.06 10.42 12.19 12.99 14.14 17.00 18.50 23.50 26.89 9 145 (R) SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel C45 Module : 5.0 Thickness (b) : 40mm 9 Order Code N (teeth) 101 235 012 101 235 013 101 235 014 101 235 015 101 235 016 101 235 017 101 235 018 101 235 019 101 235 020 101 235 021 101 235 022 101 235 023 101 235 024 101 235 025 101 235 026 101 235 027 101 235 028 101 235 030 101 235 032 101 235 035 101 235 036 101 235 038 101 235 040 101 235 045 101 235 048 101 235 050 101 235 052 101 235 055 101 235 056 101 235 060 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 45 48 50 52 55 56 60 Overall Dia da 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 160 170 185 190 200 210 235 250 260 270 285 290 310 Pitch Dia d 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 150 160 175 180 190 200 225 240 250 260 275 280 300 Hub Dia ND 40 40 50 60 60 60 60 60 60 60 60 60 80 80 80 80 80 80 80 80 100 100 100 100 100 120 120 150 150 160 146 (R) Hub Length NL Bore B Torque (Nm) Weight (kg) 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 15 15 15 15 15 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 24.0 28.2 32.8 37.6 42.8 48.3 54.2 60.4 66.9 73.8 80.9 88.5 96.3 104.5 113.1 121.9 131.2 150.6 171.3 205.0 216.8 241.6 267.7 338.8 385.5 418.3 452.5 506.2 524.8 602.4 0.99 1.14 1.45 1.79 1.98 2.11 2.33 2.55 2.78 3.03 3.30 3.57 4.29 4.59 4.80 5.13 5.47 6.18 7.14 8.36 9.45 10.33 11.30 13.87 15.44 17.50 18.75 22.00 23.00 26.50 Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel C45 Module : 5.0 Thickness (b) : 40mm Order Code 101 245 020 101 245 025 101 245 030 101 245 035 101 245 036 101 245 038 101 245 040 101 245 045 101 245 048 101 245 050 101 245 052 101 245 056 101 245 060 101 245 065 101 245 070 N (teeth) 20 25 30 35 36 38 40 45 48 50 52 56 60 65 70 Overall Dia da 110 135 160 185 190 200 210 235 250 260 270 290 310 335 360 Pitch Dia d 100 125 150 175 180 190 200 225 240 250 260 280 300 325 350 Bore B Torque (Nm) Weight (kg) 20 25 25 25 25 25 25 25 30 30 30 30 30 30 30 66.9 104.5 150.6 205.0 216.8 241.6 267.7 338.8 385.5 418.3 452.5 524.8 602.4 707.0 820.0 2.29 3.61 5.29 7.27 7.71 8.63 9.57 12.15 13.02 13.59 16.28 18.85 22.00 25.50 30.00 9 Fax: +44 (0)1992 509890 147 (R) SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel C45 Module : 6.0 Thickness (b) : 50mm 9 Order Code N (teeth) 101 236 012 101 236 013 101 236 014 101 236 015 101 236 016 101 236 017 101 236 018 101 236 019 101 236 020 101 236 021 101 236 022 101 236 023 101 236 024 101 236 025 101 236 026 101 236 027 101 236 028 101 236 030 101 236 032 101 236 035 101 236 036 101 236 038 101 236 040 101 236 045 101 236 048 101 236 050 101 236 052 101 236 055 101 236 056 101 236 060 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 32 35 36 38 40 45 48 50 52 55 56 60 Overall Dia da 84 90 96 102 108 114 120 126 132 138 144 150 156 162 168 174 180 192 204 222 228 240 252 282 300 312 324 342 348 372 Pitch Dia d 72 78 84 90 96 102 108 114 120 126 132 138 144 150 156 162 168 180 192 210 216 228 240 270 288 300 312 330 336 360 Hub Dia ND 50 50 60 60 60 60 70 70 70 70 80 80 80 80 80 80 90 100 100 100 100 110 120 120 120 140 140 150 150 150 148 (R) Hub Length NL Bore B 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 40 40 40 Torque (Nm) 43.3 50.9 59.0 67.7 77.1 87.7 97.5 108.7 120.4 132.8 145.7 159.3 173.5 188.2 203.6 219.5 236.1 271.1 308.4 369.0 390.3 434.9 481.9 609.9 694.0 753.0 814.5 911.2 944.6 1084.4 Weight (kg) 1.72 1.99 2.45 2.79 3.12 3.47 4.05 4.46 4.88 5.24 5.94 6.43 6.93 7.49 8.05 8.62 9.78 11.33 12.74 14.95 15.70 18.00 19.69 24.50 27.66 30.61 34.91 35.84 36.50 43.00 Tel: +44 (0)1992 509888 SPUR GEARS - STEEL * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 High quality machined gears for industrial use. Manufactured to DIN 3967. Quality grade 8. Material : Steel C45 Module : 6.0 Thickness (b) : 50mm Order Code 101 246 025 101 246 030 101 246 036 101 246 040 101 246 045 101 246 048 101 246 050 101 246 052 101 246 056 101 246 060 N (teeth) 25 30 36 40 45 48 50 52 56 60 Overall Dia da 162 192 228 252 282 300 312 324 348 372 Pitch Dia d 150 180 216 240 270 288 300 312 336 360 Bore B 25 25 25 30 30 30 30 30 40 40 Torque (Nm) 188.2 271.1 390.3 481.9 609.9 694.0 753.0 814.5 944.6 1084.4 Weight (kg) 6.50 9.50 14.00 17.50 22.00 25.00 27.00 29.50 34.00 39.00 9 Fax: +44 (0)1992 509890 149 (R) S P U R G E A R S - S TA I N L E S S S T E E L * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 Manufactured to DIN 3967 Quality grade 8 Material : Stainless Steel 1.4305, Module : 9 Order Code N (teeth) 101 214 510 101 214 512 101 214 515 101 214 518 101 214 520 101 214 524 101 214 525 101 214 530 101 214 536 101 214 540 101 214 548 101 214 550 101 214 554 101 214 560 101 214 564 101 214 565 101 214 570 101 214 572 101 214 575 101 214 580 101 214 600 101 214 620 10 12 15 18 20 24 25 30 36 40 48 50 54 60 64 65 70 72 75 80 100 120 Overall Dia da 12 14 17 20 22 26 27 32 38 42 50 52 56 62 66 67 72 74 77 82 102 122 10 12 15 18 20 24 25 30 36 40 48 50 54 60 64 65 70 72 75 80 100 120 Material : Stainless Steel 1.4305, Module : Order Code N (teeth) 101 218 512 101 218 515 101 218 518 101 218 520 101 218 524 101 218 525 101 218 530 101 218 535 101 218 540 101 218 545 101 218 548 101 218 550 101 218 555 101 218 560 101 218 565 101 218 570 101 218 580 12 15 18 20 24 25 30 35 40 45 48 50 55 60 65 70 80 Overall Dia da (mm) 21 25.5 30 33 39 40.5 48 55.5 63 70.5 75 78 85.5 93 100.5 108 123 1.0, Thickness (b) : 10mm Pitch Dia d Hub Dia ND 8 10 12 15 15 15 20 25 25 25 30 30 40 40 40 40 40 50 50 50 60 60 Bore B 6 6 6 6 6 6 6 8 8 8 10 10 10 12 12 12 12 12 12 12 12 12 4 4 5 6 6 6 8 8 8 8 10 10 10 10 10 10 10 10 10 10 12 12 Torque (Ncm) 7.8 11.3 17.6 25.4 31.4 45.2 49.1 70.7 100.0 120.0 180.0 190.0 220.0 280.0 320.0 330.0 380.0 400.0 440.0 1070.0 1440.0 1730.0 Weight (g) 7 10 16 24 28 39 46 77 102 120 182 193 262 320 352 360 401 484 510 560 856 1125 1.5, Thickness (b) : 15mm Pitch Dia d (mm) 18 22.5 27 30 36 37.5 45 52.5 60 67.5 72 75 82.5 90 97.5 105 120 Hub Dia ND (mm) 15 18 22 25 25 25 30 30 40 40 40 50 50 60 60 60 70 150 (R) Hub Length NL Hub Length NL (mm) Bore B (mm) Torque (Ncm) Weight (g) 10 10 10 10 15 15 15 15 15 15 15 15 15 15 15 20 20 8 10 10 10 10 10 10 10 10 10 10 10 10 12 12 12 15 38.10 59.85 85.90 100.00 150.00 160.00 230.00 320.00 420.00 530.00 610.00 660.00 1700.00 2030.00 2380.00 2760.00 3610.00 32 49 79 103 154 166 246 317 454 541 599 721 831 1041 1172 1423 1878 Tel: +44 (0)1992 509888 S P U R G E A R S - S TA I N L E S S S T E E L * Milled teeth, straight interlocking * Bore tolerances to H7 * Pressure angle 20 Manufactured to DIN 3967 Quality grade 8 Material : Stainless Steel 1.4305, Module : Order Code N (teeth) 101 231 512 101 231 515 101 231 518 101 231 520 101 231 524 101 231 525 101 231 530 101 231 535 101 231 540 101 231 545 101 231 548 101 231 550 101 231 555 101 231 560 12 15 18 20 24 25 30 35 40 45 48 50 55 60 Overall Dia da 28 34 40 44 52 54 64 74 84 94 100 104 114 124 24 30 36 40 48 50 60 70 80 90 96 100 110 120 Material : Stainless Steel 1.4305, Module : Order Code N (teeth) 101 233 512 101 233 515 101 233 518 101 233 520 101 233 524 101 233 525 101 233 530 101 233 535 101 233 540 101 233 545 101 233 548 101 233 550 12 15 18 20 24 25 30 35 40 45 48 50 Fax: +44 (0)1992 509890 Overall Dia da 42 51 60 66 78 81 96 111 126 141 150 156 2.0, Thickness (b) : 16mm Pitch Dia d Hub Dia ND 20 25 30 30 30 30 40 45 50 50 50 50 60 70 Hub Length NL Bore B 15 15 15 15 15 15 15 15 15 15 15 15 15 15 10 12 12 12 12 12 12 12 12 12 12 12 12 12 Torque (Nm) 0.72 1.10 1.60 2.00 2.80 3.10 4.50 6.10 17.10 21.60 24.60 26.70 32.30 38.50 Weight (g) 70 114 179 207 275 295 466 632 825 911 1098 1174 1485 1827 9 3.0, Thickness (b) : 25mm Pitch Dia d 36 45 54 60 72 75 90 105 120 135 144 150 Hub Dia ND 25 35 45 45 50 50 50 60 70 70 80 80 Hub Length NL Bore B Torque (Nm) Weight (g) 15 15 15 15 15 15 15 15 20 20 20 20 12 12 12 15 15 15 20 20 20 20 20 20 5.4 8.4 12.1 15 21.6 23.5 33.8 46.1 60.2 76.2 86.7 94.1 210 378 586 670 957 1019 1355 1904 2670 3263 3841 4101 151 (R) HIGH QUALITY * BEST PRICE * EX-STOCK 152 (R) Tel: +44 (0)1992 509888