Silicon Planar PIN Photodiode PD70-01B/TR7 Features Daylight filter High sensitivity Low capacitance Short switching time Wide temperature range Small package Pb free The product itself will remain within RoHS compliant version. Compliance with EU REACH. Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm). Descriptions The PD70-01B/TR7 is high sensitivity, fast switching times, low capacitance, compact size, and lack of measurable degradation make it suitable for diverse applications, such as TV and appliance remote control, IR sound transmission, video recorders, and measurement and control. Applications High speed photo detector Copier Elevator Device Selection Guide 1 Part Category Chip Material Lens Color PD Silicon Black Copyright (c) 2013, Everlight All Rights Reserved. Release Date :11/24/2016. Issue No: DPD-0000162 Rev:5 www.everlight.com Data Sheet Silicon Planar PIN Photodiode PD70-01B/TR7 Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions 0.1mm Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Units Reverse Voltage VR 32 Operating Temperature Topr -25 ~ +85 V Storage Temperature Tstg -40 ~ +85 Soldering Temperature *1 Tsol 260 Power Dissipation at(or below) 25Free Air Temperature Pd 150 mW Notes: *1:Soldering time5 seconds. 2 Copyright (c) 2013, Everlight All Rights Reserved. Release Date :11/24/2016. Issue No: DPD-0000162 Rev: 5 www.everlight.com Data Sheet Silicon Planar PIN Photodiode PD70-01B/TR7 Electro-Optical Characteristics (Ta=25) Parameter Condition Min Typ Max Unit Rang Of Spectral Bandwidth 0.5 --- 730 --- 1100 nm Wavelength Of Peak Sensitivity P --- --- 940 --- nm Short- Circuit Current ISC Ee=1mW/cm2 p=940nm --- 35 --- A Reverse Light Current IL Ee=1mW/cm2 p=940nm VR=5V 17 25 --- A Reverse Dark Current ID Ee=0mW/cm2 VR=10V --- 5 30 nA VBR Ee=0mW/cm2 IR=100A 32 170 --- V Reverse Breakdown Voltage 3 Symbol Copyright (c) 2013, Everlight All Rights Reserved. Release Date :11/24/2016. Issue No: DPD-0000162 Rev: 5 www.everlight.com Data Sheet Silicon Planar PIN Photodiode PD70-01B/TR7 Typical Electro-Optical Characteristics Curves Fig.1 Spectral Sensitivity Fig.2 Reverse Light Current vs. Ee 1.0 O Ta=25 C 0.8 0.6 0.4 0.2 0 600 700 800 900 1000 1100 1200 4 Copyright (c) 2013, Everlight All Rights Reserved. Release Date :11/24/2016. Issue No: DPD-0000162 Rev: 5 www.everlight.com Data Sheet Silicon Planar PIN Photodiode PD70-01B/TR7 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the PHOTODIODEs should be kept at 30 or less and 90%RH or less. 2.3 The PHOTODIODEs should be used within a year. 2.4 After opening the package, the PHOTODIODEs should be kept at 30 or less and 60%RH or less. 2.5 The PHOTODIODEs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the PHOTODIODEs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the PHOTODIODEs during heating. 3.4 After soldering, do not warp the circuit board. 5 Copyright (c) 2013, Everlight All Rights Reserved. Release Date :11/24/2016. Issue No: DPD-0000162 Rev: 5 www.everlight.com Data Sheet Silicon Planar PIN Photodiode PD70-01B/TR7 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 or 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the PHOTODIODEs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the PHOTODIODEs will or will not be damaged by repairing. 6 Copyright (c) 2013, Everlight All Rights Reserved. Release Date :11/24/2016. Issue No: DPD-0000162 Rev: 5 www.everlight.com Data Sheet Silicon Planar PIN Photodiode PD70-01B/TR7 Package Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Carrier Tape Dimensions:(Quantity: 1000pcs/reel) Note: The tolerances unless mentioned is 0.1mm ,Unit = mm 7 Copyright (c) 2013, Everlight All Rights Reserved. Release Date :11/24/2016. Issue No: DPD-0000162 Rev: 5 www.everlight.com Data Sheet Silicon Planar PIN Photodiode PD70-01B/TR7 Label Form Specification CPN: Customer's Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number DISCLAIMER 1. EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification. 2. The product meets EVERLIGHT published specification for a period of twelve (12) months from date of shipment. 3. The graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 5. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without obtaining EVERLIGHT's prior consent. 6. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. Please contact authorized Everlight sales agent for special application request. 8 Copyright (c) 2013, Everlight All Rights Reserved. Release Date :11/24/2016. Issue No: DPD-0000162 Rev: 5 www.everlight.com