PD70-01B-TR7 - EVERLIGHT ELECTRONICS

1

www.everlight.com

Silicon Planar PIN Photodiode

PD70-01B/TR7

Features

․Daylight filter

․High sensitivity

․Low capacitance

․Short switching time

․Wide temperature range

․Small package

․Pb free

․The product itself will remain within RoHS compliant version.

․Compliance with EU REACH.

․Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm).

Descriptions

‧The PD70-01B/TR7 is high sensitivity, fast switching times, low capacitance, compact size,

and lack of measurable degradation make it suitable for diverse applications, such as TV and

appliance remote control, IR sound transmission, video recorders, and measurement and

control.

Applications

․High speed photo detector

․Copier

․Elevator

Device Selection Guide

Part Category

Chip

Material

Lens Color

PD

Silicon

Black

Data Sheet

Silicon Planar PIN Photodiode

PD70-01B/TR7

2

www.everlight.com

Package Dimensions

Notes: 1.All dimensions are in millimeters

2.Tolerances unless dimensions ±0.1mm

Absolute Maximum Ratings (Ta=25℃)

Parameter

Symbol

Rating

Units

Reverse Voltage

VR

32

V

Operating Temperature

Topr

-25 ~ +85

℃

Storage Temperature

Tstg

-40 ~ +85

℃

Soldering Temperature *1

Tsol

260

℃

Power Dissipation at(or below)

25℃Free Air Temperature

Pd

150

mW

Notes: *1:Soldering time≦5 seconds.

Data Sheet

Silicon Planar PIN Photodiode

PD70-01B/TR7

3

www.everlight.com

Electro-Optical Characteristics (Ta=25℃)

Parameter

Symbol

Condition

Min

Typ

Max

Unit

Rang Of Spectral Bandwidth

λ0.5

---

730

---

1100

nm

Wavelength Of Peak Sensitivity

λP

---

940

---

nm

Short- Circuit Current

ISC

Ee=1mW/cm2

λp=940nm

---

35

---

μA

Reverse Light Current

IL

Ee=1mW/cm2

λp=940nm

VR=5V

17

25

---

μA

Reverse Dark Current

ID

Ee=0mW/cm2

VR=10V

---

5

30

nA

Reverse Breakdown Voltage

VBR

Ee=0mW/cm2

IR=100μA

32

170

---

V

Data Sheet

Silicon Planar PIN Photodiode

PD70-01B/TR7

4

www.everlight.com

0600 700

0.2

0.4

0.6

0.8 Ta=25O

C

1.0

1100800 900 1000 1200

Typical Electro-Optical Characteristics Curves

Fig.1 Spectral Sensitivity Fig.2 Reverse Light Current vs. Ee

Data Sheet

Silicon Planar PIN Photodiode

PD70-01B/TR7

5

www.everlight.com

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection , otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the PHOTODIODEs should be kept at 30℃ or less and 90%RH or less.

2.3 The PHOTODIODEs should be used within a year.

2.4 After opening the package, the PHOTODIODEs should be kept at 30℃ or less and 60%RH or less.

2.5 The PHOTODIODEs should be used within 168 hours (7 days) after opening the package.

2.6 If the moisture absorbent material (silica gel) has faded away or the PHOTODIODEs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the PHOTODIODEs during heating.

3.4 After soldering, do not warp the circuit board.

Data Sheet

Silicon Planar PIN Photodiode

PD70-01B/TR7

6

www.everlight.com

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ or 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and

do soldering of each terminal. Be careful because the damage of the product is often started at the

time of the hand solder.

5.Repairing

Repair should not be done after the PHOTODIODEs have been soldered. When repairing is

unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed

beforehand whether the characteristics of the PHOTODIODEs will or will not be damaged by

repairing.

Data Sheet

Silicon Planar PIN Photodiode

PD70-01B/TR7

7

www.everlight.com

Package Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Carrier Tape Dimensions:(Quantity: 1000pcs/reel)

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Data Sheet

Silicon Planar PIN Photodiode

PD70-01B/TR7

8

www.everlight.com

Label Form Specification

CPN: Customer’s Production Number

P/N : Production Number

QTY: Packing Quantity

CAT: Ranks

HUE: Peak Wavelength

REF: Reference

LOT No: Lot Number

DISCLAIMER

1. EVERLIGHT reserves the right(s) on the adjustment of product material mix for the

specification.

2. The product meets EVERLIGHT published specification for a period of twelve (12) months from

date of shipment.

3. The graphs shown in this datasheet are representing typical data only and do not show guaranteed

values.

4. When using this product, please observe the absolute maximum ratings and the instructions for

using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any

damage resulting from the use of the product which does not comply with the absolute maximum

ratings and the instructions included in these specification sheets.

5. These specification sheets include materials protected under copyright of EVERLIGHT.

Reproduction in any form is prohibited without obtaining EVERLIGHT’s prior consent.

6. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining

or life saving applications or any other application which can result in human injury or death.

Please contact authorized Everlight sales agent for special application request.