2013-09-16 OSLON Black Series (850 nm) Version 1.1 SFH 4715S Features: Besondere Merkmale: * * * * * IR lightsource with high efficiency Double Stack emitter Low thermal resistance (Max. 11 K/W) Centroid wavelength 850 nm ESD safe up to 2 kV acc. to ANSI/ESDA/JEDEC JS-001-HBM, Class 2 * Superior Corrosion Robustness (see chapter package outlines) * The product qualification test plan is based on the guidelines of AEC-Q101-REV-C, Stress Test Qualification for Automotive Grade Discrete Semiconductors. * * * * * IR-Lichtquelle mit hohem Wirkungsgrad 2- fach Stack Emitter Niedriger Warmewiderstand (Max. 11 K/W) Schwerpunktwellenlange 850 nm ESD sicher bis 2 kV nach ANSI/ESDA/JEDEC JS-001- HBM, Klasse 2 * Erweiterte Korrosionsfestigkeit (s.a. Abschnitt Mazeichnung) * Die Produktqualifikation wurde basierend auf der Richtlinie AEC-Q101-REV-C, Stress Test Qualification for Automotive Grade Discrete Semiconductors", durchgefuhrt. Applications Anwendungen * Infrared Illumination for cameras * Maschine vision systems * Surveillance systems * Infrarotbeleuchtung fur Kameras * Beleuchtung fur Bilderkennungssysteme * Uberwachungssysteme Notes Hinweise Depending on the mode of operation, these devices emit highly concentrated non visible infrared light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1 and IEC 62471. Je nach Betriebsart emittieren diese Bauteile hochkonzentrierte, nicht sichtbare Infrarot-Strahlung, die gefahrlich fur das menschliche Auge sein kann. Produkte, die diese Bauteile enthalten, mussen gema den Sicherheitsrichtlinien der IEC-Normen 60825-1 und 62471 behandelt werden. 2013-09-16 1 Version 1.1 SFH 4715S Ordering Information Bestellinformation Type: Radiant Intensity Ordering Code Typ: Strahlstarke Bestellnummer IF=1 A, tp=10 ms Ie [mW/sr] SFH 4715S 440 ( 320) Note: measured at a solid angle of = 0.01 sr Anm.: gemessen bei einem Raumwinkel = 0.01 sr Q65111A1549 Maximum Ratings (TA = 25 C) Grenzwerte Parameter Symbol Values Unit Bezeichnung Operation and storage temperature range Betriebs- und Lagertemperatur Symbol Werte Einheit Top; Tstg -40 ... 125 C Junction temperature Sperrschichttemperatur Tj 145 C Reverse voltage Sperrspannung VR 1 V Forward current Durchlassstrom IF 1000 Surge current Stostrom (tp 500 s, D = 0) IFSM 5 A Power consumption Leistungsaufnahme Ptot 3.4 W Thermal resistance junction - solder point Warmewiderstand Sperrschicht - Lotpad RthJS 11 K/W mA Note: For the forward current and power consumption please see "maximum permissible forward current" diagram Anm. : Fur den Vorwartsgleichstrom und die Leistungsaufnahme siehe auch das "maximal zulassige Durchlassstrom" Diagramm 2013-09-16 2 Version 1.1 SFH 4715S Characteristics (TA = 25 C) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Emission wavelength Zentrale Emissionswellenlange (IF = 1 A, tp = 10 ms) peak 860 nm Centroid Wavelength Schwerpunktwellenlange der Strahlung (IF = 1 A, tp = 10 ms) centroid 850 nm Spectral bandwidth at 50% of Imax Spektrale Bandbreite bei 50% von Imax (IF = 1A, tp = 10 ms) 30 nm Half angle Halbwinkel 45 Rise and fall times of Ie ( 10% and 90% of Ie max) Schaltzeiten von Ie ( 10% und 90% von Ie max) (IF = 5 A, RL = 50 ) tr / tf 7/14 ns Forward voltage Durchlassspannung (IF = 1 A, tp = 100 s) VF 2.9 ( 3.4) V Forward voltage Durchlassspannung (IF = 5 A, tp = 100 s) VF 3.5 ( 4.5) V Total radiant flux Gesamtstrahlungsfluss (IF = 1A, tp = 100 s) e 1030 mW Temperature coefficient of Ie or e Temperaturkoeffizient von Ie bzw. e (IF = 1A, tp = 10 ms) TCI -0.3 %/K Temperature coefficient of VF Temperaturkoeffizient von VF (IF = 1A, tp = 10 ms) TCV -2 mV / K Temperature coefficient of wavelength Temperaturkoeffizient der Wellenlange (IF = 1A, tp = 10 ms) TC 0.3 nm / K 2013-09-16 3 Version 1.1 SFH 4715S Grouping (TA = 25 C) Gruppierung Group Min Radiant Intensity Max Radiant Intensity Gruppe Min Strahlstarke Max Strahlstarke IF=1 A, tp=10 ms IF=1 A, tp=10 ms Ie, min [mW / sr] Ie, max [mW / sr] SFH4715S - CB 320 500 SFH4715S - DA 400 630 SFH4715S - DB 500 800 Note: measured at a solid angle of = 0.01 sr Only one group in one packing unit (variation lower 1.6:1). Anm.: gemessen bei einem Raumwinkel = 0.01 sr Nur eine Gruppe in einer Verpackungseinheit (Streuung kleiner 1.6:1). Relative Spectral Emission Relative spektrale Emission Relative Total Radiant Flux Relativer Gesamtstrahlungsfluss e/e(1A) = f (IF), TA = 25 C, Single pulse, tp = 100 s Irel = f (), TA = 25 C, IF =1A, tp = 10 ms OHF04132 100 OHF04187 101 I rel % e e (1 A) 80 100 5 60 10-1 40 5 20 10-2 5 0 700 750 800 850 10-3 -2 10 nm 950 2013-09-16 5 10-1 5 10 0 A IF 4 10 1 Version 1.1 SFH 4715S Forward Current Durchlassstrom IF = f(VF), single pulse, tp = 100 s, TA= 25C Max. Permissible Forward Current Max. zulassiger Durchlassstrom IF = f (TS ), RthJS = 11 K/W OHF05030 1100 mA IF IF OHF04188 101 A 900 800 100 700 5 600 500 400 10-1 300 5 200 100 0 0 20 40 60 80 100 10-2 C 140 Permissible Pulse Handling Capability Zulassige Pulsbelastbarkeit IF = f (tp), TS = 85 C, Duty cycle D = parameter IF 5.5 A OHF05031 t tP D = TP 4.5 4.0 3.5 3.0 2.5 2.0 1.5 IF T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 1.0 0.5 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2013-09-16 2 2.5 3 3.5 V VF TS 5 4 Version 1.1 SFH 4715S Radiation Characteristics Abstrahlcharakteristik Irel = f() 40 30 20 10 0 OHL04470 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 1.0 0.8 0.6 0.4 0 Package Outline Mazeichnung Dimensions in mm (inch). / Mae in mm (inch). 2013-09-16 6 20 40 60 80 100 120 Version 1.1 SFH 4715S Note: IRED is protected by ESD device which is connected in parallel to chip. Anm.: Die IRED enthalt ein ESD-Schutzbauteil, das parallel zum Chip geschaltet ist. Note: Package is not suitable for ultra sonic cleaning. Anm.: Das Gehause ist fur Ultraschallreinigung nicht geeignet. Note: Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h Anm.: Korrosionsfestigkeit besser als EN 60068-2-60 (Methode 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15ppm H2S / 336h Note: Anode mark: Anode pad has chamfered edge, which points to cathode Anm.: Anodenkennung: Anodenpad ist abgeschragt und weist zur Kathode. Approx. weight: 32 mg Gewicht: 32 mg 2013-09-16 7 Version 1.1 SFH 4715S Method of Taping Gurtung Dimensions in mm (inch). / Mae in mm (inch). Note: Packing unit: 600/reel, o180 mm Anm.: Verpackungseinheit: 600/Rolle, o180 mm 2013-09-16 8 Version 1.1 SFH 4715S Recommended Solder Pad Empfohlenes Lotpaddesign Dimensions in mm (inch). / Mae in mm (inch). Note: For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Anm.: Um eine verbesserte Lotstellenkontaktierung zu erreichen, empfehlen wir, unter Standardstickstoffatmosphare zu loten. 2013-09-16 9 Version 1.1 SFH 4715S Reflow Soldering Profile Reflow-Lotprofil Preconditioning: JEDEC Level 2 acc. to JEDEC J-STD-020D.01 OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 250 s 300 t 2013-09-16 10 Version 1.1 SFH 4715S OHA04612 Profile Feature Profil-Charakteristik Symbol Symbol Pb-Free (SnAgCu) Assembly Minimum Ramp-up rate to preheat*) 25 C to 150 C Time tS TSmin to TSmax tS 60 Ramp-up rate to peak*) TSmax to TP Recommendation Maximum 2 3 100 120 2 3 Unit Einheit K/s s K/s Liquidus temperature TL 217 Time above liquidus temperature tL 80 100 s Peak temperature TP 245 260 C Time within 5 C of the specified peak temperature TP - 5 K tP 20 30 s 3 6 K/s 10 Ramp-down rate* TP to 100 C 480 Time 25 C to TP All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range 2013-09-16 C 11 s Version 1.1 SFH 4715S Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2013-09-16 12 Version 1.1 SFH 4715S Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2013-09-16 13