Part Number 856541 201 MHz SAW Filter Data Sheet Features For GSM and EDGE applications Usable bandwidth 0.22 MHz Typical 1dB bandwidth of 0.34 MHz Low loss High attenuation Balanced operation at 200 or Single-ended operation at 50 (different matching required) Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 13.30 x 6.50 x 1.50 mm SMP-53C Bottom View 1 2 3 4 5 10 9 8 7 6 1.50 NOM. 1.65 MAX. 0.64 13.3 1.91 1.80 Balanced Configuration Pin No. Description 10,1 Input 5,6 Output 2,3,4 Case Ground 7,8,9 Case Ground R0.51 6.50 2.31 1.02 Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev D 08/10 (c) TriQuint Semiconductor Page 1 of 6 Part Number 856541 201 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) 0 to +70 C Parameter (3) Minimum Typical (4) Maximum Unit 201.11 201 6.1 200.83 201.17 7.0 200.89 - MHz dB MHz MHz 2.05 0.6 2.3 1.0 2.55 dB p-p s - 0.8 1.5 s 16 27 28 36 38 - 25 29 32 40 40 200 200 - dB dB dB dB dB Center Frequency (fc) Insertion Loss Lower 1 dB Band Edge Upper 1 dB Band Edge Amplitude Variation (5) 200.89 - 201.11 MHz Absolute Group Delay at fc Group Delay Variation 200.89 - 201.11 MHz Stopband Attenuation (6) fc 0.3 MHz to fc 0.4 MHz fc 0.4 MHz to fc 0.6 MHz fc 0.6 MHz to fc 0.8 MHz fc 0.8 MHz to fc 1.5 MHz fc 1.5 MHz to fc 35 MHz Source Impedance (Balanced) (7) Load Impedance (Balanced) (7) Notes: 1. All specifications are based on the TriQuint test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Amplitude variation is defined as the difference between the lowest loss and the highest loss within defined frequency points 6. Relative to insertion loss at 201 MHz 7. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 33nH 27nH 10 200 Balanced Input 6 15pF 18pF 200 33nH Subject to change or obsolescence without notice 1 Rev D 2,3,4 7,8,9 5 200 200 Balanced Output 27nH 08/10 (c) TriQuint Semiconductor Page 2 of 6 Part Number 856541 201 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 C Parameter (3) Minimum Typical (4) Maximum Unit 201.081 201 6.1 200.83 201.17 7.2 200.89 - MHz dB MHz MHz 2.05 0.6 2.3 1.4 2.55 dB p-p s - 0.8 1.5 s 38 35 28 25 10.5 16 27 28 35 38 - 40 40 32 29 25 25 29 32 40 40 200 200 - dB dB dB dB dB dB dB dB dB dB Center Frequency (fc) Insertion Loss Lower 1 dB Band Edge Upper 1 dB Band Edge Amplitude Variation (5) 200.89 - 201.11 MHz Absolute Group Delay at fc Group Delay Variation 200.89 - 201.11 MHz Stopband Attenuation (6) fc - 35 MHz to fc - 1.5 MHz fc - 1.5 MHz to fc - 0.8 MHz fc - 0.8 MHz to fc - 0.6 MHz fc - 0.6 MHz to fc - 0.4 MHz fc - 0.4 MHz to fc - 0.3 MHz fc + 0.3 MHz to fc + 0.4 MHz fc + 0.4 MHz to fc + 0.6 MHz fc + 0.6 MHz to fc + 0.8 MHz fc + 0.8 MHz to fc + 1.5 MHz fc + 1.5 MHz to fc + 35 MHz Source Impedance (Balanced) (7) Load Impedance (Balanced) (7) Notes: 1. All specifications are based on the TriQuint test circuit shown below 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Amplitude variation is defined as the difference between the lowest loss and the highest loss within defined frequency points 6. Relative to insertion loss at 201 MHz 7. This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 33nH 27nH 10 200 Balanced Input 6 15pF 18pF 200 33nH Subject to change or obsolescence without notice 1 Rev D 2,3,4 7,8,9 5 200 200 Balanced Output 27nH 08/10 (c) TriQuint Semiconductor Page 3 of 6 Part Number 856541 201 MHz SAW Filter Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev D 08/10 (c) TriQuint Semiconductor Page 4 of 6 Part Number 856541 201 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 33nH 27nH 10 200 Balanced Input 6 15pF 18pF 200 33nH 1 2,3,4 7,8,9 5 200 Balanced Output 200 27nH Marking PCB Footprint 8.86 SAWTEK 856541 XXXXXX ID Dot 2.51 6.70 Date Code 1.22 2.00 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) .69 This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel ID dot 24.8 2.7 O330 0.3 4.0 2.0 O1.5 A 1.75 11.5 13.9 24 Direction of travel O102 O20.2 O13.0 2.0 2.3 Section A-A 7.1 12.0 O1.5 A Dimensions shown are nominal in millimeters Packaging quantity: 2000 units/reel Subject to change or obsolescence without notice Rev D 08/10 (c) TriQuint Semiconductor Page 5 of 6 Part Number 856541 201 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg -40 -40 +85 +85 Unit o C C o Important Notes Warnings Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters Soldering Profile RoHS Information Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev D 08/10 Or contact one of our worldwide Network of sales offices, Representatives or distributors (c) TriQuint Semiconductor Page 6 of 6