For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY MULTIPLIER - ACTIVE - SMT
1
HMC695LP4 / HMC695LP4E
v02.0212
SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER
11.4 - 13.2 GHz OUTPUT
General Description
Features
Functional Diagram
Output Power: +7 dBm
Sub-Harmonic Suppression: >25 dBc
SSB Phase Noise: -140 dBc/Hz
Single Supply: +5V @ 60 mA
24 Lead 4x4 mm SMT Package: 16 mm2
Electrical Specications, TA = +25° C, Vcc= 5V
Typical Applications
The HMC695LP4(E) is ideal for:
• Fiber Optic Applications
• Point-to-Point Radios
• Military Radar
The HMC695LP4(E) are active miniature x4 frequ-
ency multipliers utilizing InGaP GaAs HBT technology
in 4x4 mm leadless surface mount packages. Power
output is +7 dBm typical from a +5V supply voltage
and varies little vs. input power, temperature and sup-
ply voltage. Suppression of undesired fundamental
and sub-harmonics is >25 dBc typical with respect
to output signal level. The low additive SSB phase
noise of -140 dBc/Hz at 100 kHz offset helps the
user maintain good system noise performance. The
HMC695LP4(E) are ideal for use in LO multiplier
chains allowing reduced parts count vs. traditional
approaches.
Parameter Min. Ty p. Max. Units
Frequency Range, Input 2.85 - 3.3 GHz
Frequency Range, Output 11.4 - 13.2 GHz
Input Power Range -15 5 dBm
Output Power 2 7 dBm
Sub-Harmonic Suppression 25 dBc
Input Return Loss 15 dB
Output Return Loss 8 dB
SSB Phase Noise (100 kHz Offset) Pin= 0 dBm -140 dBc/Hz
Supply Current (Icc) 60 75 mA
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY MULTIPLIER - ACTIVE - SMT
2
HMC695LP4 / HMC695LP4E
v02.0212
SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER
11.4 - 13.2 GHz OUTPUT
Output Power vs.
Temperature @ -10 dBm Drive Level
Output Power vs.
Supply Voltage @ -10 dBm Drive Level
Output Power vs. Drive Level
Input Return Loss vs. Temperature
Output Return Loss vs. Temperature
0
2
4
6
8
10
11 11.5 12 12.5 13 13.5 14
+25 C
+85 C
-40 C
POWER (dBm)
OUTPUT FREQUENCY (GHz)
-70
-50
-30
-10
10
30
2.75 3 3.25 3.5
Fout
1Fin
2Fin
3Fin
5Fin
6Fin
7Fin
8Fin
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
-20
-15
-10
-5
0
8 10 12 14 16
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
0
2
4
6
8
10
11 11.5 12 12.5 13 13.5 14
Vcc=4.5V
Vcc=5.0V
Vcc=5.5V
POWER (dBm)
OUTPUT FREQUENCY (GHz)
0
2
4
6
8
10
11 11.5 12 12.5 13 13.5 14
-20 dBm
-15 dBm
-10 dBm
-5 dBm
0 dBm
+5 dBm
POWER (dBm)
OUTPUT FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
2 2.5 3 3.5 4 4.5 5
+25 C
+85 C
-40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
Harmonics @ -10 dBm Drive Level
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY MULTIPLIER - ACTIVE - SMT
3
HMC695LP4 / HMC695LP4E
v02.0212
SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER
11.4 - 13.2 GHz OUTPUT
SSB Phase Noise
@ Pin = -10 dBm @ 12.5 GHz
Absolute Maximum Ratings Typical Supply Current vs. Vcc
Vcc (V) Icc (mA)
4.75 59
5.00 60
5.25 61
Note: Multiplier will operate over full voltage range shown
above.
RF Input (Vcc= +5V) +20 dBm
Vcc +5.5V
Channel Temperature 135 °C
Continuous Pdiss (T=85 °C)
(derate 10.8 mW/°C above 85 °C) 538 mW
Thermal Resistance (Rth)
(junction to ground paddle) 93 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1B
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
-160
-140
-120
-100
-80
-60
-40
-20
0
102103104105106107
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
-160
-140
-120
-100
-80
-60
-40
-20
0
102103104105106107
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
SSB Phase Noise
@ Pin = 0 dBm @ 12.5 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY MULTIPLIER - ACTIVE - SMT
4
HMC695LP4 / HMC695LP4E
v02.0212
SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER
11.4 - 13.2 GHz OUTPUT
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC695LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H695
XXXX
HMC695LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H695
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY MULTIPLIER - ACTIVE - SMT
5
HMC695LP4 / HMC695LP4E
v02.0212
SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER
11.4 - 13.2 GHz OUTPUT
Pin Description
Pin Number Function Description Interface Schematic
1, 2, 5 - 14,
17, 18, 20 - 24 N/C
The pins are not connected internally; however, all
data shown herein was measured with these pins
connected to RF/DC ground externally.
3RFIN RF input needs to be DC blocked only if there is an
external DC voltage applied to RFIN.
4, 15 GND All ground leads and ground paddle
must be soldered to PCB RF/DC ground.
16 RFOUT Multiplied Output. AC coupled.
No external DC blocks necessary.
19 Vcc Supply voltage 5V
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQUENCY MULTIPLIER - ACTIVE - SMT
6
HMC695LP4 / HMC695LP4E
v02.0212
SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER
11.4 - 13.2 GHz OUTPUT
Evaluation PCB
Item Description
J1 - J3 PCB Mount SMA Connector
C1 1,000 pF Capacitor, 0603 Pkg.
U1 HMC695LP4(E) x4 Active Multiplier
PCB [2] 104610 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 4350
The circuit board used in the application should be
generated with proper RF circuit design techniques.
Signal lines should have 50 ohm impedance while
the package ground leads and exposed paddle
should be connected directly to the ground plane
similar to that shown. The evaluation circuit board
shown is available from Hittite upon request.
List of Materials for Evaluation PCB 106137 [1]
