3MTM 4-Wall Header .100 x .100 Latch/Ejector, Straight, Compliant Pin 3000 Series * Military (with 3M's 3518 polarizing key) and centerbump polarization * Optional ejector latches * Optional polarizing posts * Snap-in latches * Mounting holes for securing header to board * Dependable eye-of-the needle pin design * RoHS* compliant version (RB plating suffix) available Date Modified: December 15, 2005 TS-0478-12 Sheet 1 of 3 Physical Insulation Material: Glass Filled Polyester Flammability: UL 94V-0 Color: Gray or Black (RB plating suffix) Contact Material: Phosphor Bronze Plating Underplating: 100 [ 2.54 m ] Nickel Wiping Area: 30 [ 0.76 m ] Gold [ 2.54 m ] Tin Lead or 300u" [7.62 um] Matte Tin (see ording Tails: 100 information) Terminal Finish Indicator: e3 (for RB plating suffix) (per JESD-97) Marking: 3M Logo, Part Identification Number & Orientation Triangle Electrical Current Rating: 1 A > 1 x 109 at 500 Vdc Withstanding Voltage: 1000 Vrms at Sea Level Insulation Resistance: Environmental Temperature Rating: -55C to +105C Moisture Sensitivity Level: 1 (per J-STD-020C) "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. UL File No.: E68080 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM 4-Wall Header .100 x .100 Latch/Ejector, Straight, Compliant Pin 3000 Series -620T02 Header with Short Ejector/Latch for 3M Sockets without Strain Relief -600T02 Header with No Ejector/Latch .08 [2.0] -630T02 Header with Long Ejector/Latch for 3M sockets with Strain Relief .08 [2.0] .573 .010 [14.55] .424 .010 [10.77] 1.07 Ref [27.2] .97 Ref [24.6] .37 Ref [9.4] In c h .46 Ref [11.7] [m m ] B T ole ra nc e U n le ss N o te d in c h .0 .0 0 .1 .0 1 .0 05 .00 0 .28 [7.1] D .185 [4.70] .100 Ref [2.54] [ ] D im e n s io n s fo r R e fe re n c e O n ly .12 [3.0] .25 [6.4] .100 Ref [2.54] .34 [8.6] 2X .100 [2.54] (See Note 2) Postion 1 A Notch B (See Table) .025 .002 Sq Typ [0.64] Position 1 Orientation Triangle Notch C (See Table & Note 1) Notch A (See Table & Note 1) A .24 [6.1] .68 [17.3] .30 [7.6] .35 [8.9] .175 .010 [4.44] Section A-A .19 [4.8] A .21 [5.3] .020 [0.51] .16 [4.1] C Notes: 1. Notches A & C will accomodate 3M Polarizing Keys 3518. 2. Accepts Rear and Front entry mounting hardware: Rear Entry: #4-24 thread cutting screw 3M Part # 3341-5 (.116 [2.95] dia. mounting hole). Front Entry (Prior to installation of latch): #2-56 Bolt and Nut 3M Part # 3341-6 (.106 [2.69] dia. mounting hole). 3M Interconnect Solutions http://www.3M.com/interconnects/ TS-0478-12 Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM 4-Wall Header .100 x .100 Latch/Ejector, Straight, Compliant Pin 3000 Series Pin Quantity 3M Part Number A B Dimensions C D 10 3793 1.26 [32.1] 1.105 [28.07] .865 [21.97] .71 [18.0] 14 Polarizing Notches Provided BC Insertion platen 3442-00XX 3442-0048 3314 1.46 [37.2] 1.305 [33.15] 1.065 [27.05] .91 [23.1] BC 3442-0049 16 3408 1.56 [39.7] 1.405 [35.69] 1.165 [29.59] 1.01 [25.6] ABC 3442-0050 20 3428 1.76 [44.8] 1.605 [40.77] 1.365 [34.67] 1.21 [30.7] ABC 3442-0051 24 3627 1.96 [49.9] 1.805 [45.85] 1.565 [39.75] 1.41 [35.8] ABC 3442-0052 26 3429 2.06 [52.4] 1.905 [48.39] 1.665 [42.29] 1.51 [38.3] ABC 3442-0053 30 3440 2.26 [57.5] 2.105 [53.47] 1.865 [47.37] 1.71 [43.4] ABC 3442-0054 34 3431 2.46 [62.6] 2.305 [58.55] 2.065 [52.45] 1.91 [48.5] ABC 3442-0055 40 3432 2.76 [70.2] 2.605 [66.17] 2.365 [60.07] 2.21 [56.1] ABC 3442-0056 50 3433 3.26 [82.9] 3.105 [78.87] 2.865 [72.77] 2.71 [68.8] ABC 3442-0057 60 3372 3.76 [95.6] 3.605 [91.57] 3.365 [85.47] 3.21 [81.5] ABC 3442-0058 3764 3.96 [100.7] 3.805 [96.65] 3.565 [90.55] 3.41 [86.6] ABC 3442-0059 64 .300 Min [7.62] Side to Side Stackability .106 [2.69] or (See Note 2) .116 [2.95] See Note 3 .060 [1.52] Position 1 R S T R S T Tail Section Compliant Section 4X R .009 Max [0.23] .100 .003 [2.54] .100 .003 [2.54] Mating Area Section R-R R .020 Sym [0.51] .352 [8.94] B Recommended Mounting Hole Pattern Section S-S Note: 3. Listed below are the PCB hole sizes and tolerances recommended for use with 3M's compliant pin header. The insertion force is designed not to exceed 40 pounds per pin and the withdrawal force is not less than 10 pounds per pin. 4. Snap-in latch/ejectors (3505-30 & -31) may be added to product by user 4X .002 .001 [0.05] Break Edges Section T-T Hole Size for: Preferred Drilled - .0453 .0005 Acceptable Drilled - .0453 +.0005 -.0010 After Etchback - .0460 Max After Plating - .040 .003 Board thickness - .093 to .150 Plating: .001 Minimum Copper plating thickness .0003 Min Tin plating Pin Cross Sections Ordering Information X XXXX-6X0T02XX Prefix: blank = PBT plastic (gray) N = PCT plastic (black) (RoHS compliant) 3M Part Number Assembly Equipment: Use 3442-00XX platen (see chart above) and appropriate commercial arbor press to press header into pc board. 3M Interconnect Solutions http://www.3M.com/interconnects/ Plating suffix: TC = tin lead tails RB = matte tin tails (RoHS compliant) Latch/Ejector System: 0 = No latch/ejectors 2 = Short latch/ejectors 3 = Long latch/ejectors TS-0478-12 Sheet 3 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/electronics Minimum 10% Post-Consumer Fiber Printed in USA. (c) 3M 2005 3M Interconnect Solutions : 3MTM .100 in. 4-Wall Header, 10 Contacts, RoHS Compliant, 3793-630T02RB Select a Location Page 1 of 2 English 3M Worldwide : Electronics Manufacturing Search This Product Catalog By Keyword 3M Interconnect Solutions Home Product Catalog for Interconnects 3MTM Backplane Interconnects 3MTM Breadboards & Test Clips 3MTM Cable 3MTM Copper Cable Assemblies 3MTM Copper Interconnects 3MTM NovecTM Aerosol Cleaners 3MTM TextoolTM Test and Burn-In Sockets 3MTM Tools and Accessories A A A A A A A A A A A A A A A A A A A Product Catalog for Interconnects 3MTM Copper Interconnects . . . 3MTM .100 in. 4-Wall Header 3MTM .100 in. 4-Wall Header, 10 Contacts, 3793 Series 3MTM .100 in. 4-Wall Header, 10 Contacts, RoHS Compliant, 3793-630T02RB Printer-friendly format .100" x .100" Latch/Ejector, Straight, Compliant Pin, Long Latch/Ejectors, Matte Tin Tails. Available options are 3518 Polarizing Key, 3505 Ejector Latch and 3201 Polarizing Post, all ordered separately. [click to enlarge] 3M Id : 80-0009-0269-4 GTIN(UPC/EAN) : 0 00 51111 65993 9 Where to Buy Locate Distributor Locate Sales Contact Other Tools Find Products New Products Product Status Changes Industry Solutions News & Events Regulatory Issues Related Sites Additional Information * Military (with 3Ms 3518 polarizing key) and center bump polarization * Optional ejector latches * Mounting holes for securing header to board * Snap-in latches * Optional polarizing posts mhtml:file://F:\CPR\03232006_1\IIIM\3793-630T02RB.mht Learn More . . . Email 3MTM .100 in. 4-Wll Hdr.,.100"x .100"L/E,Strt.,Cmpl.Pin,TS0478 - Data Sheet (PDF 405.4 K) Please Note: Adobe(R) Acrobat(R) Reader is required to view PDF documents. 24-Mar-2006 3M Interconnect Solutions : 3MTM .100 in. 4-Wall Header, 10 Contacts, RoHS Compliant, 3793-630T02RB A A A A A A Component Handling Solutions Microinterconnect Solutions All Electronic Solutions (c)3M 1995-2006 Page 2 of 2 * Dependable eye-of-the needle pin design * RoHS compliant versiion (RB plating suffix) available For more information, refer to TS0478 (TS-0478) Legal Information Privacy Policy mhtml:file://F:\CPR\03232006_1\IIIM\3793-630T02RB.mht 24-Mar-2006