3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ 4-Wall Header
.100″ × .100″ Latch/Ejector, Straight, Compliant Pin 3000 Series
Physical
Electrical
Environmental
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
Insulation
Material: Glass Filled Polyester
Flammability: UL 94V-0
Color: Gray or Black (RB plating suffix)
Contact
Material: Phosphor Bronze
Plating
Underplating: 100 µ″ [ 2.54 µm ] Nickel
Wiping Area: 30 µ″ [ 0.76 µm ] Gold
Tails: 100 µ″ [ 2.54 µm ] Tin Lead or 300u" [7.62 um] Matte Tin (see ording
information)
Terminal Finish Indicator: e3 (for RB plating suffix) (per JESD-97)
Marking: 3M Logo, Part Identification Number & Orientation Triangle
Current Rating: 1 A
Insulation Resistance: > 1 × 109 Ω at 500 Vdc
Withstanding Voltage: 1000 Vrms at Sea Level
Temperature Rating: -55°C to +105°C
Moisture Sensitivity Level: 1 (per J-STD-020C)
TS-0478-12
Sheet 1 of 3
• Military (with 3M's 3518 polarizing key) and
centerbump polarization
• Optional ejector latches
• Optional polarizing posts
• Snap-in latches
• Mounting holes for securing header to board
• Dependable eye-of-the needle pin design
• RoHS* compliant version (RB plating suffix)
available
Date Modified: December 15, 2005
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ 4-Wall Header
.100″ × .100″ Latch/Ejector, Straight, Compliant Pin 3000 Series
.0 .00 .000
inch ±.1 ±.01 ±.005
[ ] D im ensions for Reference
Only
Tolerance Unless Noted
[mm]
Inch
-620T02
Header
with Short Ejector/Latch
for 3M Sockets without Strain Relief
-600T02
Header
with No Ejector/Latch
-630T02
Header
with Long Ejector/Latch
for 3M sockets with Strain Relief
Notes:
1. Notches A & C will accomodate 3M Polarizing Keys 3518.
2. Accepts Rear and Front entry mounting hardware:
Rear Entry: #4-24 thread cutting screw
3M Part # 3341-5 (.116 [2.95] dia. mounting hole).
Front Entry (Prior to installation of latch): #2-56 Bolt and Nut
3M Part # 3341-6 (.106 [2.69] dia. mounting hole). TS-0478-12
Sheet 2 of 3
.08
[2.0]
.08
[2.0]
B
.28
[7.1]
.12
[3.0]
D.185
[4.70]
.25
[6.4]
Postion 1
.97 Ref
[24.6]
.573 ± .010
[14.55]
.424 ± .010
[10.77]
1.07 Ref
[27.2]
.100 Ref
[2.54] 2X ∅.100
[2.54]
(See Note 2)
.100 Ref
[2.54]
.37 Ref
[9.4] .46 Ref
[11.7]
.34
[8.6]
A
Notch A
(See Table & Note 1)
Notch C
(See Table & Note 1)
Notch B
(See Table)
.35
[8.9]
.21
[5.3] .16
[4.1]
.020
[0.51]
.68
[17.3]
.24
[6.1]
.30
[7.6] .19
[4.8]
.025 ± .002 Sq Typ
[0.64]
.175 ± .010
[4.44]
Position 1
Orientation
Triangle
A
A
Section A-A
C
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ 4-Wall Header
.100″ × .100″ Latch/Ejector, Straight, Compliant Pin 3000 Series
Pin
Quantity
3M Part
Number
Dimensions Polarizing
Notches
Provided
Insertion platen
3442-00XX
A B C D
10 3793 1.26 [32.1] 1.105 [28.07] .865 [21.97] .71 [18.0] B C 3442-0048
14 3314 1.46 [37.2] 1.305 [33.15] 1.065 [27.05] .91 [23.1] B C 3442-0049
16 3408 1.56 [39.7] 1.405 [35.69] 1.165 [29.59] 1.01 [25.6] A B C 3442-0050
20 3428 1.76 [44.8] 1.605 [40.77] 1.365 [34.67] 1.21 [30.7] A B C 3442-0051
24 3627 1.96 [49.9] 1.805 [45.85] 1.565 [39.75] 1.41 [35.8] A B C 3442-0052
26 3429 2.06 [52.4] 1.905 [48.39] 1.665 [42.29] 1.51 [38.3] A B C 3442-0053
30 3440 2.26 [57.5] 2.105 [53.47] 1.865 [47.37] 1.71 [43.4] A B C 3442-0054
34 3431 2.46 [62.6] 2.305 [58.55] 2.065 [52.45] 1.91 [48.5] A B C 3442-0055
40 3432 2.76 [70.2] 2.605 [66.17] 2.365 [60.07] 2.21 [56.1] A B C 3442-0056
50 3433 3.26 [82.9] 3.105 [78.87] 2.865 [72.77] 2.71 [68.8] A B C 3442-0057
60 3372 3.76 [95.6] 3.605 [91.57] 3.365 [85.47] 3.21 [81.5] A B C 3442-0058
64 3764 3.96 [100.7] 3.805 [96.65] 3.565 [90.55] 3.41 [86.6] A B C 3442-0059
Ordering Information
TS-0478-12
Sheet 3 of 3
X XXXX-6X0T02XX
3M Part Number
Latch/Ejector System:
0 = No latch/ejectors
2 = Short latch/ejectors
3 = Long latch/ejectors
Note:
3. Listed below are the PCB hole sizes and tolerances recommended for use with 3M's compliant pin
header. The insertion force is designed not to exceed 40 pounds per pin and the withdrawal force is
not less than 10 pounds per pin.
4. Snap-in latch/ejectors (3505-30 & -31) may be added to product by user
Hole Size for:
Preferred Drilled - .0453 ± .0005
Acceptable Drilled - .0453 +.0005
-.0010
After Etchback - .0460 Max
After Plating - .040 ± .003
Board thickness - .093 to .150
Plating:
.001 Minimum Copper plating thickness
.0003 Min Tin plating
∅.106
[2.69] or
∅.116
[2.95]
(See Note 2)
See Note 3
.300 Min
[7.62]
Side to Side
Stackability
4X .002 ± .001
[0.05]
Break Edges
.100 ± .003
[2.54]
.060
[1.52]
4X R .009 Max
[0.23]
R .020 Sym
[0.51]
.100 ± .003
[2.54]
.352
[8.94]
Position 1
B
Section R-R
Recommended Mounting Hole Pattern
Section S-S
Section T-T
Pin Cross Sections
RST
RST
Tail
Section
Compliant Section Mating
Area
Assembly Equipment: Use 3442-00XX platen (see chart above) and
appropriate commercial arbor press to press header into pc board.
Plating suffix:
TC = tin lead tails
RB = matte tin tails (RoHS compliant)
Prefix:
blank = PBT plastic (gray)
N = PCT plastic (black)
(RoHS compliant)
3
Printed in USA.
Minimum 10%
Post-Consumer Fiber
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
for a period of 90 days from the time of purchase. 3M MAKES
NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. If this product is
defective within the warranty period stated above, your exclusive
remedy shall be, at 3M’s option, to replace or repair the 3M
product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect,
special, incidental or consequential loss or damage arising
from this 3M product, regardless of the legal theory asserted.
3M Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/electronics © 3M 2005
Select a Location
English
3M Worldwide : Electronics Manufacturing
Search This Product Catalog
By Keyword
3M Interconnect
Solutions Home
Product Catalog
for Interconnects
3M™ Backplane
Interconnects
3M™ Breadboards &
Test Clips
3M™ Cable
3M™ Copper Cable
Assemblies
3M™ Copper
Interconnects
3M™ Novec™ Aerosol
Cleaners
3M™ Textool™ Test
and Burn-In Sockets
3M™ Tools and
Accessories
 Where to Buy
  Locate Distributor
  Locate Sales Contact
 Other Tools
  Find Products
  New Products
  Product Status
Changes
  Industry Solutions
  News & Events
  Regulatory Issues
 Related Sites
Product Catalog for Interconnects
3M™ Copper Interconnects . . . 3M™ .100 in. 4-Wall Header
3M™ .100 in. 4-Wall Header, 10 Contacts, 3793 Series
3M™ .100 in. 4-Wall Header, 10 Contacts,
RoHS Com
p
liant, 3793-630T02RB
Printer-friendly format
[click to enlarge]
.100" x .100" Latch/Ejector, Straight, Compliant Pin, Long
Latch/Ejectors, Matte Tin Tails. Available options are 3518
Polarizing Key, 3505 Ejector Latch and 3201 Polarizing Post, all
ordered separately.
3M Id : 80-0009-0269-4
GTIN(UPC/EAN) : 0 00 51111 65993 9
Additional Information
· Military (with 3M`s 3518
polarizing key) and center
bump polarization
· Optional ejector latches
· Mounting holes for securing
header to board
· Snap-in latches
· Optional polarizing posts
Learn More . . .
Please Note:
Adobe® Acrobat® Reader is required to view PDF
documents.
Email
3M™ .100 in. 4-Wll
Hdr.,.100"x .100"L/E,Strt.,Cmpl.Pin,TS0478 - Data
Sheet (PDF 405.4 K)
Pa
g
e 1 of 23M Interconnect Solutions : 3M™ .100 in. 4-Wall Header, 10 Contacts, RoHS Com
p
liant, 3793-630T02RB
24-Ma
r
-2006mhtml:file://F:\CPR\03232006
_
1\IIIM\3793-630T02RB.mht
  Component Handling
Solutions
  Microinterconnect
Solutions
  All Electronic
Solutions
· Dependable eye-of-the
needle pin design
· RoHS compliant versiion
(RB plating suffix) available
For more information, refer
to TS0478 (TS-0478)
©3M 1995-2006
Legal Information
Privacy Policy
Pa
g
e 2 of 23M Interconnect Solutions : 3M™ .100 in. 4-Wall Header, 10 Contacts, RoHS Com
p
liant, 3793-630T02RB
24-Ma
r
-2006mhtml:file://F:\CPR\03232006
_
1\IIIM\3793-630T02RB.mht
