SPEC NO: DSAD2396 REV NO: V.11A DATE: OCT/26/2012 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1311000123
20.32mm (0.8INCH) 16 SEGMENT SINGLE
DIGIT
Part Number: PSC08-11EWA
High Efficiency Red
Features
z0.8 inch character height.
zLow current operation.
zHigh contrast and light output.
zCommon cathode and common anode available.
zEasy mounting on P.C. boards or sockets.
zMechanically rugged.
zStandard : gray face, white segment.
zRoHS compliant.
Description
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAD2396 REV NO: V.11A DATE: OCT/26/2012 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1311000123
Selection Guide
Notes:
1. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25° C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
* Wavelength value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type
Iv (ucd) [1]
@ 10mA Description
Min. Typ.
PSC08-11EWA High Efficiency Red (GaAsP/GaP) White Diffused
3600 7700
*900 *2100
Common Cathode,
Rt. Hand Decimal.
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength High Efficiency Red 627 *627 nm IF=20mA
λD [1] Dominant Wavelength High Efficiency Red 625 *617 nm IF=20mA
Δλ1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA
C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA
IR Reverse Current High Efficiency Red 10 uA VR=5V
Parameter High Efficiency Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 160 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
SPEC NO: DSAD2396 REV NO: V.11A DATE: OCT/26/2012 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1311000123
High Efficiency Red PSC08-11EWA
SPEC NO: DSAD2396 REV NO: V.11A DATE: OCT/26/2012 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1311000123
PACKING & LABEL SPECIFICATIONS PSC08-11EWA
SPEC NO: DSAD2396 REV NO: V.11A DATE: OCT/26/2012 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1311000123
SPEC NO: DSAD2396 REV NO: V.11A DATE: OCT/26/2012 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: C.H.HAN ERP: 1311000123
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes
