ZFV Smart Sensors (with Ultra-High-Speed CCD Camera) 1
CSM_ZFV_DS_E_1_1
Smart Sensors
(with Ultra-High-Speed CCD Camera)
ZFV Series
Low-cost but advanced Smart
Sensors combining benefits of
optical and vision sensors.
Sensor integrated with light for easy installation
Easy operation by selecting icons while watching
LCD monitor
Ultra-high speed response for fast-moving
production lines
Ordering Information
Sets of Sensor Head and Amplifier Unit
Sensor Heads
* Robot Cable type.
Amplifier Units
Accessories (Order Separately)
Data Storage Units
Type NPN PNP
Narrow View/Single Function ZFV-R1010 ZFV-R1015
Narrow View/Standard ZFV-R1020 ZFV-R1025
Wide View/Single Function ZFV-R5010 ZFV-R5015
Wide View/Standard ZFV-R5020 ZFV-R5025
Appearance Type Working length Sensing area Model
Narrow View 34 to 49 mm (variable) 5 × 4.6 mm (H × V) to
9 × 8.3 mm (H × V)
ZFV-SR10
ZFV-SR10R *
Wide View 38 to 194 mm (variable) 10 × 9.2 mm (H × V) to
50 × 46 mm (H × V)
ZFV-SR50
ZFV-SR50R *
Appearance Type Power supply Output type Model
Single Function 24 VDC ± 10% NPN ZFV-A10
PNP ZFV-A15
Standard NPN ZFV-A20
PNP ZFV-A25
Appearance Power supply Output type Model
24 VDC NPN ZS-DSU11
PNP ZS-DSU41
2ZFV Smart Sensors (with Ultra-High-Speed CCD Camera)
Controller Link Unit
Panel-mounting Adapter
Sensor Head Extension Cable
Note:A maximum of two Extension Cables can be connected to
extend the cable length of each Sensor Head. There are no
restrictions on the combinations of the two Extension Cables to
be used.
Specifications
Sensor Heads
Appearance Model
ZS-XCN
Appearance Model
ZS-XPM1 First Unit
ZS-XPM2 Additional Units
(for expansion)
Cable length Model
3 m ZFV-XC3BV2
ZFV-XC3BRV2 (Robot cable type)
8 m ZFV-XC8BV2
Item ZFV-SR10 ZFV-SR10R ZFV-SR50 ZFV-SR50R
Setting distance (L) 34 to 49 mm 38 to 194 mm
Detection range (H × V) 5 × 4.6 mm to 9 × 8.3 mm 10 × 9.2 mm to 50 × 46 mm
Relation between setting dis-
tance and detection range
Guide light Provided (center, sensing area)
Built-in lens Focus: f15.65 Focus: f13.47
Object lighting method Pulse lighting
Object light source Eight red LEDs
Sensing element 1/3-inch CCD, partial scan
Shutter Electronic shutter, shutter time: 1/1,000 to 1/4,000
Power supply voltage 15 VDC (Supplied from Amplifier Unit.)
Current consumption Approx. 200 mA
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min
Vibration resistance (destruction) 10 to 150 Hz, 0.35-mm single amplitude, 10 times each in X, Y, and Z directions for 8 min
Shock resistance (destruction) 150 m/s2, three times each in six directions (up/down, left/right, forward/backward)
Ambient temperature Operating: 0 to 40°C, Storage: 25 to 65°C (with no icing or condensation)
Ambient humidity Operating and storage: 35% to 85% (with no condensation)
Ambient atmosphere Must be free of corrosive gas.
Connection method Pre-wired cord
Cable length Standard cable
(Available length: 2 m)
Robot cable
(Available length: 2 m)
Standard cable
(Available lengths: 2 m, 5 m)
Robot cable
(Available length: 2 m)
Degree of protection IEC60529, IP65
Materials (Case) ABS
Materials (Mounting fixture) PBT Base: Aluminum,
bracket: Stainless steel PBT Base: Aluminum,
bracket: Stainless steel
Weight (including mounting
fixture and cord)
Approx. 200 g Approx. 270 g
2-m-long cord: Approx. 200 g
5-m-long cord: Approx. 350 g
Approx. 270 g
Accessories
ZFV-XMF mounting fixture (1),
Ferrite core (1),
Instruction guide (1)
ZFV-XMF3 mounting fixture (1),
Ferrite core (1),
Instruction guide (1)
ZFV-XMF mounting fixture (1),
Ferrite core (1 (2 for 5-mcord
models)), Instructionguide (1)
ZFV-XMF3 mounting fixture (1),
Ferrite core (1),
Instruction guide (1)
49 mm
Setting distance
(L)
34 mm
5 mm 9 mm Detection range
(H) 10 mm
194 mm
38 mm
50 mm
Setting distance
(L)
Detection range
(H)
ZFV Smart Sensors (with Ultra-High-Speed CCD Camera) 3
Amplifier Units
Note 1. This is the sampling rate when logging images. To log measurement data only, use the ZS-DSU settings.
2. Image logging is not possible when the ZS-MDC is connected.
Item Single-function models Standard models
ZFV-A10 ZFV-A15 ZFV-A20 ZFV-A25
Output method NPN PNP NPN PNP
Output NPN: NPN open-collector output, 50 mA max. at 30 VDC, Residual voltage: 1.2 V max.
PNP: PNP open-collector output, 50 mA max., Residual voltage: 1.2 V max.
Inspection items Pattern (PTRN), Brightness (BRGT) Patterns (PTRN), Brightness (BRGT), Area (AREA), Width
(WID), Position (POSI), Count (CNT), Characters (CHAR)
Teaching area Rectangular, one area
Teaching area size Pattern (PTRN), Brightness (BRGT): Any rectangular area (256 × 256 max.)
Area (AREA), Width (WID), Position (POSI), Count (CNT), Characters (CHAR): Any rectangular area (full screen max.)
Sensing area Full screen
Resolution 468 × 432 (H × V) max.
Bank selection Supported for 8 banks.
Response time Pattern (PTRN), Brightness (BRGT): High-speed: 4 ms, Standard: 8 ms, High-precision: 12 ms (not using partial scan)
Area (AREA), Width (WID), Position (POSI), Count (CNT), Characters (CHAR): 128 × 128: 15 ms max.
Other functions Control output switching: ON for OK or ON for NG
ON delay/OFF delay, One-shot output, “ECO” mode
Output signals (1) Control output (OUTPUT), (2) Enable output (ENABLE), (3) Error output (ERROR)
Input signals (1) Simultaneous measurement input (TRIG) or Continuous measurement input (TRIG), Switched by using menu.
(2) Bank selection inputs (BANK1 to BANK3)
(3) Workpiece still teaching (TEACH) or Workpiece moving teaching (TEACH), Switched by using menu.
Connect-
ing to ZS-
DSU
Image log-
ging trigger
Stores NG images or all images.
Sampling
rate
ZFV measurement cycle (See note 1.)
Number of
logged im-
age
Logs up to 128 images in series
Number of
connected
15 max. (ZFV: 5 Units max., ZS-LDC: 9 Units max., ZS-MDC (See note 2.): 1 Unit max.)
External
bank func-
tion
Amplifier Unit setting data can be saved to the memory card as bank data. Reading bank data enables bank switching.
Sensor Head interface Digital interface
Image display Compact TFT 2.2-inch LCD (Display dots: 930 × 234)
Indicators Judgement result indicator (OUTPUT) Inspection mode indicator (RUN)
Operation interface Cursor keys (up, down, left, right) Setting key (SET) Escape key (ESC)
Operating mode switching (slide switch) Menu switching (slide switch)
Teaching/Display switching key (TEACH/VIEW)
Power supply voltage 20.4 to 26.4 VDC (including ripple)
Current consumption 600 mA max. (with Sensor Head connected, power supply voltage 24VDC)
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between leads and Amplifier Unit case
Noise immunity 1 kV, Pulse rise: 5 ns, Pulse width: 50 ns, Burst duration: 15 ms, Cycle: 300 ms
Vibration resistance Destruction: 10 to 150 Hz, 0.1-mm single amplitude, 10 times each in X, Y, and Z directions for 8 min
Shock resistance Destruction: 150 m/s2, three times each in six directions (up/down, left/right, forward/backward)
Ambient temperature Operating: 0 to 50°C
Storage: 25 to 65°C (with no icing or condensation)
Ambient humidity Operating and storage: 35% to 85%
Connection method Prewired, Standard cable length: 2 m
Ambient atmosphere Must be free of corrosive gas.
Degree of protection IEC60529, IP20
Materials Polycarbonate
Weight Approx. 300 g (including cord)
Accessories Ferrite core (1), Instruction sheet
4ZFV Smart Sensors (with Ultra-High-Speed CCD Camera)
Dimensions
Note:All units are in millimeters unless otherwise indicated.
Amplifier Units
33.6 30
(6.36)
30
(6.36)
4
20
32
4.5
R2
R2
4.5 67.9
17.9 5.6
32
12.8
dia.
4.5
R6.5
4.5
20±0.1
Two, 4.5 dia.
Two, M4
Depth: 6
34
17.9
Mounting Bracket can be attached to any side.
23.3
R2
R2
Mounting Hole Dimensions
Heat-resistive vinyl-insulated cable
5.8 dia, standard length: 2 m
8.5
30.1
33
1/4-20UNC
Depth: 6
3417.9
Connector
5.6
Optical axis
20±0.1
Mounting hole dimensions
Two, 4.5 dia.
Mounting fixture can be attached on each side.
32
32
30
30
30.1
8.5
12.8 dia.
67.9
33
17.9
23.3
18.5
32.5
50.5
(6.36)
(6.36)
4
Heat-resistant PVC shielded cable
5.8 mm dia. standard length 2 m
Sensor Heads
ZFV-SR@
ZFV-SR10R/SR50R
52.5
90 90
3.9
4.6
60 23.4
23.2
14.8
4.2
18
Heat-resistive vinyl-insulated cable
5.2 dia., standard length: 2 m
11.7 dia.
ZFV-A@
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omrons analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omrons Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2014.1
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2014 All Right Reserved.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
ZFV-R5015 ZS-XPM1 ZS-XPM2 ZFV-R5010 ZFV-XMF ZFV-A20 ZFV-R1015 ZFV-SR10 ZFV-R1025 ZFV-A25
ZFV-A15 ZFV-R5020 ZFV-R1020 ZFV-R1010 ZFV-SR50 ZFV-A10 ZFV-R5025 ZFV-SH10 2M ZFV-SH50