MS2-KIT - FLUKE NETWORKS - Datasheet.Live

Technical Data

MicroScanner2 Cable Verifier

Raising cable verification to a higher power

High power vision into voice/data/video cabling

For more than a decade, cabling

installation and maintenance technicians

have relied on MicroScanner to verify

terminations and troubleshoot continuity

faults. A lot has changed in the cabling

world since the original MicroScanner was

introduced. Industry economics require

that installations be done fast and

accurately with no callbacks. And converg-

ing voice, data, and video technologies

have given rise to new requirements for

service testing and multimedia support.

MicroScanner2 recognizes these trends

and presents a much-needed revolution to

the way testing is done. It streamlines

every aspect of the veriﬁcation job.

From its time-saving user interface and

integrated multimedia support to its

expanded service detection capabilities,

MicroScanner2 gives technicians the power

to perform their jobs faster and more

accurately than ever.

High power vision to verify voice/data/

video cabling and services. That’s Network

SuperVision.™ That’s Fluke Networks’

promise to you.

Reduce test time and user error

Yesterday’s cable veriﬁcation testers force

users to toggle between different modes

(up to four) to view all test results. This not

only slows the test process, but also causes

user frustration and error. MicroScanner2 has

deﬁed this convention by displaying key test

results – wiremap, pair lengths, distance to

fault, cable ID, and far-end devices – all on

one screen.

Eliminate awkward test adapters

Tired of losing or breaking all the adapters

needed for testing the various voice, data,

and video media types? MicroScanner2 makes

these adapters things of the past with built-

in RJ11, RJ45, and coax support. Both the

main unit and the far-end identiﬁers can be

used to test telephone jacks, Ethernet jacks,

and CATV outlets right out of the box.

Rule out service problems fast

Today’s communications technicians have

more problems to deal with than just the

cabling. They have to rule out a whole host

of cable and service issues before determin-

ing the cause of a connectivity problem. Is

there telephone voltage? What’s the polarity?

Is there a switch at the far end? Is PoE

available? MicroScanner2 gives technicians

high power vision to verify today’s most

common voice, data, and video services.

Locate elusive cables in seconds

MicroScanner2 features built-in IntelliTone

digital and analog toning to precisely locate

virtually any cable or wire pair, regardless of

work environment. Use digital mode to locate

high-grade data cabling (Cat 5e/6/6a) in

bundles, or at switches, patch panels, or wall

outlets. Or, use analog mode on voice-grade

cabling (Cat 3 and below), as well as coax,

security/alarm, and speaker wiring.

Repair or replace tools less often

With all the abuse you put your tools

through, you can’t afford for them to be

delicate. MicroScanner2 features a rubber

wrap-around holster that makes it the right

tool for even the toughest jobs. Toss it into

your toolbox. Drop it from a ladder. It can

handle it. Plus, it now comes standard with

a vinyl carry pouch for enhanced protection

and convenience.

MicroScanner2 Cable Veriﬁer

Coax connector for video

and audio testing

Rubber holster enhances

durability and grip

Digital toning is safe

and effective on active

networks

Length meter shows

distance to termination,

open, or short

PoE detection rules out

insufﬁcient power as source

of problems

Detail mode gives additional

test status information

Wiremap adapter doubles

as protective cap

Modular port accepts

RJ45 and RJ11 plugs

Oversized LCD is backlit

for crystal clear results

Intuitive icons show

what’s at the far end of

any cable (10/100/1000

switch, POTS service,

short, cable ID)

Graphical wiremap shows

type and location of fault

(miswires, reversals, split

pairs, shorts, breaks)

Accessories Description

MS2-IDK27 MicroScanner2 Remote Identiﬁer Kit #2-7

MT-8200-63A IntelliTone Pro 200 Probe

CLIP-SET RJ45 to 8 – Clip Test Lead

CIQ-RJA RJ45/11 Modular Adapter

CIQ-COAX Coax Adapter Kit for RCA, BNC

MS2-CPK MicroScanner2 Professional Kit Carry Case

NETWORKSUPERVISION

Fluke Networks

P.O. Box 777, Everett, WA USA 98206-0777

Fluke Networks operates in more than 50 countries

worldwide. To ﬁnd your local ofﬁce contact details,

go to www.ﬂukenetworks.com/contact.

Contact Fluke Networks: Phone 800-283-5853

(US/Canada) or 425-446-4519 (Other locations)

Email: info@ﬂukenetworks.com

Printed in U.S.A. 6/2008 2798526 D-ENG-N Rev C

Test Connectors Twisted-pair: UTP, FTP, SSTP 8-pin modular jack

accepts RJ45 and RJ11

Coax: F-connector for 75 Ω, 50 Ω, 93 Ω cables

Cable Tests Length (460 m or 1500 ft), wiremap to TIA-568A/B

standards, remote ID locators

Tone Generator IntelliTone digital tone: [500 KHz]; analog tones:

[400Hz, 1KHz]

PoE Detection Solicits and detects the presence of 802.3af

compatible PoE devices

Ethernet Port Test Advertised speed of 802.3 Ethernet ports

(10/100/1000)

Power Source Battery type: 2 AA alkaline batteries

Dimensions 3 in x 6.4 in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)

Weight 13 ounces; 363 grams (batteries included)

Warranty One year

M12/ RJ45 Cable Speciﬁcations:

Cable type Ethernet cable, Cat5e, shielded, 2 Pair AWG 26

stranded (7 wire), RAL 5021 (water blue), M12 4 pos.

D- coded on RJ45 connector

Number of positions 4

Fixed cable length 2 m

Volume resistance ≤ 5 mΩ

Insulation resistance ≥ 100 MΩ

Ambient temperature -20 oC to 50 oC

Inﬂammability class

acc to UL 94

Surge voltage