© Semiconductor Components Industries, LLC, 2012
May, 2012 Rev. 14
1Publication Order Number:
MBR2535CT/D
MBR2535CTG,
MBR2545CTG
SWITCHMODE
Power Rectifiers
The MBR2535CTG/45CTG series uses the Schottky Barrier
principle with a platinum barrier metal. These stateoftheart
devices have the following features:
Features
Guardring for Stress Protection
Low Forward Voltage
175°C Operating Junction Temperature
These are PbFree Devices*
Mechanical Characteristics
Case: Epoxy, Molded
Epoxy Meets UL 94 V0 @ 0.125 in
Weight: 1.9 grams (approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
*For additional information on our PbFree strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
TO220AB
CASE 221A
SCHOTTKY BARRIER
RECTIFIERS
30 AMPERES
35 and 45 VOLTS
1
3
2, 4
MARKING DIAGRAM
A = Assembly Location
Y = Year
WW = Work Week
B25x5 = Device Code
x = 3 or 4
G = PbFree Package
AKA = Diode Polarity
AY WW
B25x5G
AKA
Device Package Shipping
ORDERING INFORMATION
MBR2535CTG TO220
(PbFree)
50 Units/Rail
MBR2545CTG TO220
(PbFree)
50 Units/Rail
http://onsemi.com
MBR2535CTG, MBR2545CTG
http://onsemi.com
2
MAXIMUM RATINGS
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
MBR2535CTG
MBR2545CTG
VRRM
VRWM
VR35
45
V
Average Rectified Forward Current
(Rated VR, TC = 160°C)
Per Device
Per Diode
IF(AV)
30
15
A
Peak Repetitive Forward Current
per Diode Leg (Rated VR, Square Wave, 20 kHz, TC = 150°C)
IFRM 30
A
NonRepetitive Peak Surge Current per Diode Leg
(Surge Applied at Rated Load Conditions, Halfwave, Single Phase, 60 Hz)
IFSM 150
A
Peak Repetitive Reverse Surge Current (2.0 s, 1.0 kHz) IRRM 1.0 A
Storage Temperature Range Tstg 65 to +175 °C
Operating Junction Temperature (Note 1) TJ65 to +175 °C
Voltage Rate of Change (Rated VR) dv/dt 10,000 V/s
ESD Ratings:
Machine Model = C
Human Body Model = 3B
ESD
> 400
> 8000
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. The heat generated must be less than the thermal conductivity from JunctiontoAmbient: dPD/dTJ < 1/RJA.
THERMAL CHARACTERISTICS (Per Leg)
Characteristic Symbol Value Unit
Thermal Resistance,
JunctiontoCase
JunctiontoAmbient (Note 2)
RJC
RJA
1.5
50
°C/W
2. When mounted using minimum recommended pad size on FR4 board.
ELECTRICAL CHARACTERISTICS (Per Diode)
Symbol Characteristic Condition Min Typ Max Unit
VFInstantaneous Forward Voltage
(Note 3)
IF = 15 Amp, TJ = 25°C
IF = 15 Amp, TJ = 125°C
IF = 30 Amp, TJ = 25°C
IF = 30 Amp, TJ = 125°C
0.50
0.65
0.62
0.57
0.82
0.72
V
IRInstantaneous Reverse Current
(Note 3)
Rated dc Voltage, TJ = 25°C
Rated dc Voltage, TJ = 125°C
9.0
0.2
25
mA
3. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%.
MBR2535CTG, MBR2545CTG
http://onsemi.com
3
110
TC, CASE TEMPERATURE (°C)
20
8.0
4.0
0
TA, AMBIENT TEMPERATURE (°C)
200
48
24
16
8.0
0
40
8.0 160
IF, AVERAGE FORWARD CURRENT (AMPS)
32
16
12
8.0
4.0
0
12
I
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
120 130 160 180 60 80 180
P
20 4024
28
, AVERAGE FORWARD CURRENT (AMPS)
F(AV)
4.0 28 32 36
20
24
SQUARE WAVE
dc
SQUARE WAVE
dc
16
12
24
48
28 28
20
12
4.0
100 120 140
, AVERAGE POWER DISSIPATION (WATTS)
F(AV)
RATED VR APPLIED
SQUARE WAVE
dc
RATED VOLTAGE APPLIED
RJC = 1.5°C/W
RJA = 16°C/W
(With TO-220 Heat Sink)
RJA = 60°C/W
(No Heat Sink)
SQUARE WAVE
dc
TJ = 125°C
(CAPACITATIVELOAD)
IPK
IAV
+5.0
10
20
(RESISTIVELOAD)
IPK
IAV
+
Figure 1. Typical Forward Voltage, Per Leg Figure 2. Typical Reverse Current, Per Leg
0.60
VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
1000
10
VR, REVERSE VOLTAGE (VOLTS)
0
0.2
0.04
0.02
0.002
IF, INSTANTANEOUS FORWARD CURRENT (AMPS)
I
1.0
0.2 0.4 0.8 10 20 30 40
0.1
0.4
1.0
0.1
1.0 50
, REVERSE CURRENT (mA)
R
4.0
2.0
10
20
100
40
200
TJ = 125°C
150°C
25°C
TJ = 150°C
125°C
100°C
100
0.01
0.004
25°C
75°C
1.61.2 1.4 1.8
Figure 3. Current Derating, Per Device Figure 4. Current Derating, Per Device
Figure 5. Forward Power Dissipation
140 150 170
32
36
40
44
160
32
36
40
44
MBR2535CTG, MBR2545CTG
http://onsemi.com
4
PACKAGE DIMENSIONS
TO220
CASE 221A09
ISSUE AG
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.570 0.620 14.48 15.75
B0.380 0.405 9.66 10.28
C0.160 0.190 4.07 4.82
D0.025 0.036 0.64 0.91
F0.142 0.161 3.61 4.09
G0.095 0.105 2.42 2.66
H0.110 0.161 2.80 4.10
J0.014 0.025 0.36 0.64
K0.500 0.562 12.70 14.27
L0.045 0.060 1.15 1.52
N0.190 0.210 4.83 5.33
Q0.100 0.120 2.54 3.04
R0.080 0.110 2.04 2.79
S0.045 0.055 1.15 1.39
T0.235 0.255 5.97 6.47
U0.000 0.050 0.00 1.27
V0.045 --- 1.15 ---
Z--- 0.080 --- 2.04
B
Q
H
Z
L
V
G
N
A
K
F
123
4
D
SEATING
PLANE
T
C
S
T
U
R
J
STYLE 6:
PIN 1. ANODE
2. CATHODE
3. ANODE
4. CATHODE
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81358171050
MBR2535CT/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative