NOTES: UNLESS OTHERWISE SPECIFIED 1. NOTICE: | THIS IS A RoHS COMPLIANT COMPONENT/PRODUCT. ALL ENGINEERING CHANGES MUST HAVE PRIOR APPROVAL BY THE DESIGN CENTER. RoHS PLASTIC: THERMOSET PLASTIC MATERIAL WITH FLAMMABILITY RATING UL 94V0 OR BETTER. SOLDERABILITY: CONFORMS TO ANSI/JSTD002, 245C REFLOW PEAK TEMPERATURE PER IPC/EIA J-STD-003A OPERATING TEMPERATURE: OC TO +70C STORAGE TEMPERATURE: 20C TO +125C JEDEC MOISTURE: LEVEL 1. NO OF TOLERANCES: [MILLIMETERS] ARE FOR REFERENCE ONLY. XX= +.02 +0.5] XXX= +.010 [40.25] NOT FOR SALE IN U.S. ELECTRICAL CHARACTERISTICS AT +25C Pulse www.pulseelectronics.com 455 [11.56] MAX HABRAHAARAA WUOU @ Pulse 232Z105SMNL DATE CODE CTRY MFG .375 [9.53] MAX PIN 1 | (| 16X .020 [0.50] ORIETATION 7X .050 [1.27] _ 7X .050(=.350) [7X 1.27(=8.89)] DIMENSIONS ARE IN INCHES [MILLIMETERS] WITH THE FOLLOWING .225 [5.72] MAX | 4 nooo 7 .260 [6.60] | [10.16] HUUQ__+ | -275+.010 [6.99+0.25] + HYOU 16X .030 [0.76] _| 7X (.050) [(1.27)] 7X 050(= 350) [7X 1.27(=8.89)] SUGGESTED LAND PATTERN 16X 0-8 L 002 [0.05] MIN ra .004| 16 SURFACE 16X .035 0.89] -| _ PARAMETER SPECIFICATIONS OPERATING TEMP oc - 70C POLARITY PER SCHEMATIC TURNS RATIO (1-16):(2-15):(3-14):(4-13)=1 2 1: 1 (5-12):(6-11):(7-10):(8-9)=1 21: 1 : 1 45% : 1 45% ISOLATION RESISTANCE (IR AT 500 VDC) 10G OHM MIN. DC RESISTANCE 0.4 OHMS MAX LP 68 uH MIN (MEASURED AT 100 KHz, 20 mVRMS) LL 0.25 uH MAX MEASURED AT 100 KHz, 20 mVRMS) BETWEEN CHANNEL ISOLATION 500 VAC MIN @ 60 SECONDS IMPENDANCE (1-16)&(8-9) 10-20 MHz 30 MHZ 70-100 MHZ 700 OHM MIN | 600 OHM MIN| 200 OHM MIN 1:11:17: 1 : : 1: 16 15 14 13 1 12 11 #1 e 5 1:1 0 69 1 7 8 1 2 3 4 6 SCHEMATIC @ Copyright, 2013. Pulse Electronics, Inc. All rights reserved. Drawing specifications subject to change without notice. (10/15/13) PULSE CON FIDENTIAL PROPRIETARY PRODUCT DESCRIPTION | CHK,SIN,10D,1:1,SM,TU PS DRAWING | PS-2400.001-B | 1. | REV. | M12 SHEET: | DWG. NO./ PART NO. 23Z105SMNL