Detailed Specifications & Technical Data METRIC MEASUREMENT VERSION 9275 Coax - 75 Ohm Coax For more Information please call 1-800-Belden1 General Description: Series 59, 20 AWG solid .032" bare copper-covered steel conductor, gas-injected foam polyethylene insulation, Duofoil(R) or Duobond(R) + aluminum braid shield (40% coverage), PVC jacket. Physical Characteristics (Overall) Conductor AWG: # Coax AWG Stranding Conductor Material 1 20 Solid Dia. (mm) BCCS - Bare Copper Covered Steel 0.8128 Total Number of Conductors: 1 Insulation Insulation Material: Insulation Material Dia. (mm) Gas-injected FPE - Foam Polyethylene 3.6576 Outer Shield Outer Shield Material: Layer # Outer Shield Trade Name Type Outer Shield Material 1 Duofoil(R) 2 Coverage (%) Tape Aluminum Foil-Polyester Tape-Aluminum Foil 100 Braid AL - Aluminum 40 Outer Jacket Outer Jacket Material: Outer Jacket Material PVC - Polyvinyl Chloride Overall Cable Overall Nominal Diameter: 6.020 mm Mechanical Characteristics (Overall) Operating Temperature Range: -40C To +80C UL Temperature Rating: 75C Bulk Cable Weight: 32.740 Kg/Km Max. Recommended Pulling Tension: 355.856 N Min. Bend Radius/Minor Axis: 63.500 mm Applicable Specifications and Agency Compliance (Overall) Applicable Standards & Environmental Programs NEC/(UL) Specification: CATV, CM CEC/C(UL) Specification: CM EU Directive 2011/65/EU (ROHS II): Yes EU CE Mark: Yes EU Directive 2000/53/EC (ELV): Yes EU Directive 2002/95/EC (RoHS): Yes Page 1 of 3 10-30-2013 Detailed Specifications & Technical Data METRIC MEASUREMENT VERSION 9275 Coax - 75 Ohm Coax EU RoHS Compliance Date (mm/dd/yyyy): 01/01/2004 EU Directive 2002/96/EC (WEEE): Yes EU Directive 2003/11/EC (BFR): Yes CA Prop 65 (CJ for Wire & Cable): Yes MII Order #39 (China RoHS): Yes Series Type: Series 59 Flame Test UL Flame Test: UL1685 UL Loading Plenum/Non-Plenum Plenum (Y/N): No Electrical Characteristics (Overall) Nom. Characteristic Impedance: Impedance (Ohm) 75.000 Nom. Inductance: Inductance (H/m) 0.318257 Nom. Capacitance Conductor to Shield: Capacitance (pF/m) 53.1522 Nominal Velocity of Propagation: VP (%) 83 Nominal Delay: Delay (ns/m) 3.9372 Nom. Conductor DC Resistance: DCR @ 20C (Ohm/km) 146.005 Nominal Outer Shield DC Resistance: DCR @ 20C (Ohm/km) 55.777 Nom. Attenuation: Freq. (MHz) Attenuation (dB/100m) 5 2.46075 55 6.03704 211 11.0242 270 12.435 300 13.0912 350 14.2067 400 15.2895 450 16.2738 550 17.9799 750 21.3593 870 22.967 1000 25.1981 Max. Operating Voltage - UL: Voltage 300 V RMS Typical Structural Return Loss: Description Freq. (MHz) Start Freq. (MHz) Stop Freq. (MHz) Typical SRL (dB) Page 2 of 3 10-30-2013 Detailed Specifications & Technical Data METRIC MEASUREMENT VERSION 9275 Coax - 75 Ohm Coax 5 550 18 Notes (Overall) Notes: Sweep tested 5 MHz to 550 MHz. Put Ups and Colors: Item # Putup Ship Weight Color 9275 009U1000 305 MT 10.433 KG WHITE #20 LDPE/GIFHDLDPE SH FRPVC 9275 010U1000 305 MT 10.433 KG BLACK #20 LDPE/GIFHDLDPE SH FRPVC 9275 010U500 152 MT 5.443 KG BLACK #20 LDPE/GIFHDLDPE SH FRPVC 9275 0101000 305 MT 10.886 KG BLACK #20 LDPE/GIFHDLDPE SH FRPVC Revision Number: 2 Notes Item Desc Revision Date: 03-22-2013 (c) 2013 Belden, Inc All Rights Reserved. Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden's standard terms and conditions of sale. Belden believes this product to be in compliance with EU RoHS (Directive 2002/95/EC, 27-Jan-2003). Material manufactured prior to the compliance date may be in stock at Belden facilities and in our Distributor's inventory. The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden's knowledge, information, and belief at the date of its publication. The information provided in this Product Disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product. Belden declares this product to be in compliance with EU LVD (Low Voltage Directive 73/23/EEC), as amended by directive 93/68/EEC. Page 3 of 3 10-30-2013