CD42__40B CD47__40B POW-R-BLOKTM Dual SCR/Diode Isolated Module 40 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Description: OUTLINE DRAWING Powerex SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. A C F G H 3 B 45 67 2 1 T J K "U" THREAD "S" FASTON TAB L D M P Q N 4 5 1 2 ~ 3 Electrically Isolated Heatsinking DBC Alumina (Al2O3) Insulator Copper Baseplate Low Thermal Impedance for Improved Current Capability UL Recognized (E78240) CD42 6 1 Features: - + 7 2 ~ CD42__40B, CD47__40B Dual SCR/Diode Isolated POW-R-BLOKTM Module 40 Amperes / Up to 1800 Volts 3 - + CD47 Benefits: CONNECTION DIAGRAM CD42, CD47 Outline Dimensions Dimension Inches Millimeters A 3.66 93 B 0.79 20 C 3.15 80 D 1.18 30 F 0.61 15.5 G 0.79 20 H 0.79 20 J 0.16 4 K 0.22 5.7 L 0.59 15 M 1.10 28 N 0.31 8 P 0.94 24 Q 1.16 29.4 S 0.11 x .03 2.8 x 0.8 T 0.25 6.4 U M5 M5 Ordering Information: Select the complete nine digit module part number from the table below. Example: CD421640B is a 1600Volt, 40 Ampere Dual SCR/Diode Isolated TM POW-R-BLOK Module No Additional Insulation Components Required Easy Installation No Clamping Components Required Reduce Engineering Time Applications: Type CD42 CD47 Voltage Current Volts Amperes (x100) 08 12 14 16 18 40 Version B Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control Welders Note: Dimensions are for reference only. Revision Date: 04/28/2009 http://store.iiic.cc/ CD42__40B CD47__40B Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOKTM Dual SCR/Diode Isolated Module 40 Amperes / Up to 1800 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM up to 1800 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 100 V 180 Conduction, TC=85C IT(RMS) 63 A RMS Forward Current Average Forward Current 180 Conduction, TC=85C IT(AV) 40 A 60 Hz, 100% VRRM reapplied, Tj=125C ITSM 750 A 60 Hz, No VRRM reapplied, Tj=125C ITSM 890 A 60 Hz, No VRRM reapplied, Tj=25C ITSM 985 A 50 Hz, 100% VRRM reapplied, Tj=125C ITSM 715 A 50 Hz, No VRRM reapplied, Tj=125C ITSM 850 A 50 Hz, No VRRM reapplied, Tj=25C ITSM 940 A 8.3 ms, 100% VRRM reapplied, Tj=125C It 2 2,330 A sec 8.3 ms, No VRRM reapplied, Tj=125C 2 It 3,300 A sec 8.3 ms, No VRRM reapplied, Tj=25C It 2 4,030 A sec 10 ms, 100% VRRM reapplied, Tj=125C It 2 2,560 A sec 10 ms, No VRRM reapplied, Tj=125C It 2 3,610 A sec 2 It 4,420 A sec di/dt 150 A/s Operating Temperature TJ -40 to +125 C Storage Temperature Tstg -40 to +125 C 25 3 44 5 95 in.-Lb. Nm in.-Lb. Nm g 3.35 oz. 3000 3500 V V Peak One Cycle Surge Current, Non-Repetitive 2 I t for Fusing for One Cycle, 8.3 milliseconds 10 ms, No VRRM reapplied, Tj=25C Maximum Rate-of-Rise of On-State Current, (Non-Repetitive) Tj=125C Max. Mounting Torque, M5 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation @ 25C Circuit to base, all terminals shorted together 50 - 60 Hz, 1 minute 50 - 60 Hz, 1 second Vrms Vrms 2 2 2 2 2 2 Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product. Revision Date: 04/28/2009 http://store.iiic.cc/ CD42__40B CD47__40B POW-R-BLOKTM Dual SCR/Diode Isolated Module 40 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Electrical Characteristics, TJ=25C unless otherwise specified Characteristics Symbol Test Conditions Repetitive Peak Forward Leakage Current IDRM Up to 1800V, TJ=125C 20 mA Repetitive Peak Reverse Leakage Current IRRM Up to 1800V, TJ=125C 20 mA Peak On-State Voltage Min. Max. Units VTM / VFM ITM / IFM = 200A 1.95 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125C, I = 16.7% x IT(AV) to IT(AV) 1.0 4.5 V m Minimum dV/dt dV/dt Tj=125C, Up to 800V Tj=125C, 1200V - 1800V 500 V/s 1000 V/s TJ = 125C 40 - 100 Turn-Off Time (Typical) t off (Typical) s Gate Trigger Current IGT Tj= 25C, VD=6V, Resistive Load 150 mA Gate Trigger Voltage VGT Tj= 25C, VD=6V, Resistive Load 3.0 Volts Non-Triggering Gate Voltage VGDM Tj=125C, VD=VDRM 0.25 Volts Non-Triggering Gate Current IGDM Tj=125C, VD=VDRM 6 mA Holding Current IH Tj= 25C 150 mA Latching Current IL Tj= 25C 300 mA Thermal Characteristics Characteristics Max. Units Thermal Resistance, Junction to Case DC Operation Symbol RJ-C Per Module, both conducting Per Junction, both conducting 0.33 0.65 C/W C/W Thermal Resistance, Case to Sink Lubricated RC-S Per Module 0.1 C/W Revision Date: 04/28/2009 http://store.iiic.cc/ CD42__40B CD47__40B POW-R-BLOKTM Dual SCR/Diode Isolated Module 40 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance ( Tj = 125 C ) (Junction to Case) 0.50 7 0.45 Thermal Impedance - Rjc - C/W On-State Voltage - Vtm / Vfm - Volts 6 5 4 3 2 1 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0.001 0 10 100 1000 0.01 0.1 10 100 Maximum Allowable Case Temperature Maximum On-State Power Dissipation (Sinusoidal Waveform) (Sinusoidal Waveform) 60 125 120 55 90 50 180 Max. Case Temperature - Tcase -C Max. Power Dissipation Per Junction - Watts 1 Time - t - Seconds Instantaneous On-State Current - Itm/Ifm - Amperes 60 45 40 30 35 30 25 20 15 180 0 360 CONDUCTION ANGLE 10 120 115 180 0 105 100 95 30 5 60 90 5 10 15 20 25 30 35 0 40 5 10 15 20 25 180 120 90 0 0 360 CONDUCTION ANGLE 110 30 35 40 Average On-State Current - It/If(av) - Amperes Average On-State Current - It/If(av) - Amperes Maximum On-State Power Dissipation Maximum Allowable Case Temperature (Rectangular Waveform) (Rectangular Waveform) 80 125 60 120 360 180 Max. Case Temperature - Tcase -C Max. Power Dissipation Per Junction - Watts 270 70 120 60 50 90 30 40 30 20 0 180 360 CONDUCTION ANGLE 10 5 10 15 20 25 30 35 40 45 50 55 60 65 180 0 360 CONDUCTION ANGLE 110 105 100 95 360 60 30 90 0 0 115 90 120 180 270 85 Average On-State Current - It/If(av) - Amperes 0 5 10 15 20 25 30 35 40 45 50 55 60 65 Average On-State Current - It/If(av) - Amperes Revision Date: 04/28/2009 http://store.iiic.cc/