2-26
www.adlinktech.com
Introduction
ADLINK’s PCI-9111 series are 16-CH, 100 kS/s low-cost multi-function DAQ cards that feature flexible analog
input configurations. An RC filter is implemented on each A/D input channel to allow attenuation or filtering of the
input signals. The PCI-9111 series provide analog inputs with 5 programmable input ranges for bipolar inputs.
The PCI-9111 series also support automatic analog input scanning. The PCI-9111DG provides 12-bit A/D
resolution while the PCI-9111HR provides 16-bit A/D resolution.
The PCI-9111 series also feature 1-CH 12-bit analog output, 16-CH TTL digital inputs and 16-CH TTL digital
outputs. ADLINK’s PCI-9111 series delivers cost-effective and reliable data acquisition capabilities, and is ideal for
a broad variety of applications.
Features
■ Supports a 32-bit 5 V PCI bus
■ 12-bit A/D resolution (PCI-9111DG)
■ 16-bit A/D resolution (PCI-9111HR)
■ 16-CH single-ended analog inputs
■ Up to 100 kS/s sampling rate
■ Onboard 1 k-sample A/D FIFO
■ Programmablegainsofx1,x2,x4,x8,x16
■ Bipolar analog input ranges
■ Onboard low-pass filtering capability for analog inputs
■ Automatic analog inputs scanning
■ One 12-bit multiplying analog outputs
■ 16-CH TTL digital inputs and 16-CH TTL digital outputs
■ 4-CHTTLextendeddigitalinputsand4-CHTTLextended
digital outputs
■ Compact,half-sizePCB
■ Operating Systems
• Windows 7/Vista/XP/2000/2003 Server
• Linux
■ Recommended Software
• AD-Logger
• VB.NET/VC.NET/VB/VC++/BCB/Delphi
• DAQBench
■ Driver Support
• DAQPilot for LabVIEW™
• DAQ-MTLB for MATLAB
®
• PCIS-DASK for Windows
• PCIS-DASK/X for Linux
16-CH 12/16-Bit 100 kS/s Low-Cost Multi-Function DAQ Cards
PCI-9111 Series
Terminal Boards & Cables
■ DIN-37D-01*
Terminal Board with One 37-pin D-sub Connector
and DIN-Rail Mounting
■ DIN-20P-01*
Terminal Board with One 20-pin Ribbon Connector
and DIN-Rail Mounting
■ ACLD-9137-01
General-Purpose Terminal Board with One 37-pin
D-sub Male Connector
■ ACLD-9188-01*
General-Purpose Terminal Board with Two 20-pin
Ribbon Connectors and One 37-pin D-sub Connector
■ ACLD-9182A-01*
Terminal Board with 16-CH Isolated Digital Inputs
■ ACLD-9185-01*
Terminal Board with 16-CH Relay Outputs
* Cables are not included. For information on mating cables,
refer to P2-61/62
Specifications
Analog Input
■
Number of channels: 16 single-ended
■
Resolution
· 12 bits (PCI-9111DG)
· 16 bits (PCI-9111HR)
■
Conversion time: 8 μs
■
Maximum sampling rate: 100 kS/s
■
Input signal ranges (software programmable)
Pin Assignment
Ordering Information
■ PCI-9111DG
16-CH 12-Bit 100 kS/s Low-Cost Multi-Function DAQ Card
■ PCI-9111HR
16-CH 16-Bit 100 kS/s Low-Cost Multi-Function DAQ Card
±10 V
0 to 10 V
Bipolar
Unipolar
Output Range
+5 V
570 mA typical
570 mA typical
Device
PCI-9111DG
PCI-9111HR
DI0
DI2
DI4
DI6
DI8
DI10
DI12
DI14
GND
+5Vout
1
3
5
7
9
11
13
15
17
19
2
4
6
8
10
12
14
16
18
20
DI1
DI3
DI5
DI7
DI9
DI11
DI13
DI15
GND
+12Vout
CN1
AI0
AI1
AI2
AI3
AI4
AI5
AI6
AI7
A.GND
A.GND
N/C
PreTrg
+12Vout
D.GND
D.GND
ExtTrg
EDO1
EDO3
+5Vout
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
AI8
AI9
AI10
AI11
AI12
AI13
AI14
AI15
A.GND
A.GND
DA Out
EDI0
EDI1
EDI2
EDI3
EDO0
EDO2
N/C
CN3
Input Range
Bipolar
±10 V
±5 V
±2.5 V
±1.25 V
±0.625 V
Gain
1
2
4
8
16
DO0
DO2
DO4
DO6
DO8
DO10
DO12
DO14
GND
+5Vout
1
3
5
7
9
11
13
15
17
19
2
4
6
8
10
12
14
16
18
20
DO1
DO3
DO5
DO7
DO9
DO11
DO13
DO15
GND
+12Vout
CN2
General-Purpose DAQ
Gain
1, 2
4, 8
16
Accuracy
0.01% of FSR ± 1 LSB
0.02% of FSR ± 1 LSB
0.04% of FSR ± 1 LSB
■
Accuracy
■
Input coupling: DC
■
Overvoltage protection: continuous ±35 V
■
Input impedance: 10 MΩ
■
Trigger modes: software, pacer, and external trigger
(5 V/TTL compatible)
■
FIFO buffer size: 1 k samples
■
Data transfers: polling, interrupt
Analog Output
■
Number of channels: 1 voltage output (NO s)
■
Resolution: 12 bits
■
Output ranges (jumper selectable)
■
Output driving capacity: ±5 mA max
■
Settling time: 30 μs
■
Data transfers: programmed I/O
Digital I/O
■
Number of channels: 16 inputs and 16 outputs
■
Compatibility: 5 V/TTL
■
Data transfers: programmed I/O
General Specifications
■
I/O connector
· 37-pin D-sub female
· 20-pin ribbon male x 2
■
Operating temperature: 0°C to 60°C
■
Storage temperature: -20°C to 80°C
■
Relative humidity: 5% to 95%, non-condensing
■
Power requirements
■
Dimensions (not including connectors)
175 mm x 107 mm
Updated 03-28, 2012. ©2012 ADLINK Technology, Inc. All Rights Reserved. All specications are subject to change without further notice.
Updated 03-28, 2012. ©2012 ADLINK Technology, Inc. All Rights Reserved. All specications are subject to change without further notice.
