tyco Electronics Both the straight exit and the 90 exit die cast RFI/EMI shield allows cable to be fully prepared and terminated to the connector before the shield is installed. During installation, the shield of the jacketed cable is folded back and compressed into the cable opening of the RFI/EMI shield. For greater cable support and/or shielding effectiveness, split-ring and crimp ferrules are available (pages 148-150). Material and Finish: ShieldZine alloy, plated nickel over copper 4-40 Pan Head Screws & Latch Screws (90 Exit Only)Steel, zinc plated One-Piece Slide Latch (90 Exit Only}Stainless steel Related Product Data: Ferrutespages 148-150 Connectors used with: HDE Metal-Shellpages 119 & 120 HDP Metal-Shell (Tin plated only)pages 95-107 Technical Documents: Product Specificatian 108-40032 Instruction Sheet408-6769 ANP AMPLIMITE Subminiature D Type Connectors Shielded Cable Clamps (Continued) Straight Exit RFI/EMI Die Cast Shield for Jacketed Cable (Two-Piece) 620 [15.75] HDE or HDP Plug or Receptacle --~ {Shown for Ref. only} One-Piece Slice Latch (Net Included} Sie seitior i Bias Pari Grommet Size Positions Letter wiFerrules Number Kit E 260-300 745919-3 _ 2 18 H ae 378 745919-2 747746-1" K jee too 745919-1 _ Cable Dia. Range using Grommet is .185-.320 [4.70-8.13]. Notes: 1. Ail parts packaged unassembled. 2. Each kit comprised of a two-piece shield with 2 pan head screws. 3. Split-ring and crimp ferrules are shown on pages 148-150. sioj9auuo) age a 90 Exit RFI/EMI Die Cast Shields for Jacketed Cable (Two-Piece) HDE or HDP ug oF Receptacle {Shown for Ref. only) One-Piece Slide Latch (See Note 2.) Shell Dimension Cable with Slide Latch without lide Latch Grommet Size A wiFerrules Kit Numbers Kit Numbers Kit (See Note 2) (See Note 3) 1 86. 208 745652-4 ~ 2 gg Sr _ tes - : eaee5 745652-2" 745918-2" TATTAG+1 465 10.90 745652-1 = = Biz yaeeas - woo eee 745653-4 _ 3 2.850 joie 745653-3 747194-3 ME, ene - - 5780338. 745653-1* 747973-1 * Cable Dia. with Grommet Kit: Size 2 = .185-.320 [4.70-8, 13]; Size 3 =.255-.470 [6.48-11.94]. Notes: 1. All parts are packaged unassembled, 2. Each kit is comprised of atwo-piece shield with three pan head screws and aslide latch withtwo 4-40slide latch screws. 3. Each kitis comprised of a two-piece shield with three pan head screws. 4. Split-ring and crimp ferrules are shown cn pages 148-150. ARGUE ANTES sete noe 147 Catalog 82068 Revised 3-04 www.tycoelectranics.com Dimensions are in inches and millimeters unless otherwise specified. Valves in brackets are metric equivalents. South America: 55-11-3641-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 Dimensions are shown for reference purposes only. Specifications subject to change.