2014-01-14 Silicon PIN Photodiode with integrated Temperature Sensor Silizium PIN Fotodiode mit integriertem Temperatur Sensor Version 1.1 SFH 2504 Features: Besondere Merkmale: * Especially suitable for applications from 740 nm to 1100 nm * 5 mm LED plastic package * Integrated NTC thermistor, R25=10k * Speziell geeignet fur Anwendungen im Bereich von 740 nm bis 1100 nm * 5 mm-Plastikbauform im LED-Gehause * Integrierter NTC, R25=10k Applications Anwendungen * Temperature and light intensity measurement * Temperatur und Lichtmessung Ordering Information Bestellinformation Type: Photocurrent Ordering Code Typ: Fotostrom Bestellnummer VR = 5 V, = 870 nm, E e = 1 mW/cm2 IP [A] SFH 2504 AN23 2.7 ( 1.9) Q65110A3986 Maximum Ratings (TA = 25 C) Grenzwerte Parameter Symbol Bezeichnung Operating and storage temperature range Betriebs- und Lagertemperatur Reverse voltage Sperrspannung Total power dissipation Verlustleistung 2014-01-14 Values Unit Symbol Werte Einheit Top; Tstg -40 ... 100 C VR 30 V Ptot 30 mW 1 Version 1.1 SFH 2504 Characteristics (Photodiode -- TA = 25C) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Photocurrent Fotostrom (VR = 5 V, = 870 nm, Ee = 1 mW/cm2) IP Wavelength of max. sensitivity Wellenlange der max. Fotoempfindlichkeit 2.7 ( 1.9) A S max 870 nm Spectral range of sensitivity Spektraler Bereich der Fotoempfindlichkeit 10% 740 ... 1100 nm Radiant sensitive area Bestrahlungsempfindliche Flache A Dimensions of radiant sensitive area Abmessung der bestrahlungsempfindlichen Flache LxW Half angle Halbwinkel 60 Dark current Dunkelstrom (VR = 10 V) IR 0.05 ( 5) nA Rise and fall time Anstiegs- und Abfallzeit (VR = 10 V, RL = 50 , = 850 nm) tr, tf 0.01 s Forward voltage Durchlassspannung (IF = 100 mA, E = 0) VF 1.2 V Capacitance Kapazitat (VR = 0 V, f = 1 MHz, E = 0) C0 13 pF Temperature coefficient of VO Temperaturkoeffizient von VO TCV 2014-01-14 2 0.31 mm2 0.56 x 0.56 mm x mm -2.6 mV / K Version 1.1 SFH 2504 Characteristics (Thermistor (EPCOS B57860S0103A002) -- TA = 25C) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Resistance Widerstandswert R25 10 k Tolerance of resistance Toleranz Widerstandswert Rtol 3 % Rated temperature Nenntemperatur Tn 25 C 2014-01-14 3 Version 1.1 SFH 2504 Photocurrent / Open-Circuit Voltage Fotostrom / Leerlaufspannung IP = f (Ee), = 870nm, VR = 5 V Relative Spectral Sensitivity Relative spektrale Empfindlichkeit Srel = f() OHF05547 100 Srel % OHF05550 102 A IP 80 101 70 60 100 50 40 30 10-1 20 10 0 400 500 600 700 800 900 10-2 -2 10 nm 1100 10-1 mW/cm 2 101 Ee Photocurrent Fotostrom Total Power Dissipation Verlustleistung Ptot = f(T A) IP/IP25 = f (TA), = 870nm, VCE = 5 V OHF05553 1.2 Ptot I P rel 1.1 OHF05548 50 mW 40 1.0 30 0.9 20 0.8 10 0.7 0.6 -50 -25 0 25 50 0 C 100 2014-01-14 0 25 50 75 100 C 125 TA TA 4 Version 1.1 SFH 2504 Capacitance Kapazitat C = f(VR), f = 1 MHz, E = 0 Dark Current Dunkelstrom IR = f(VR), E = 0 R OHF01026 10 4 pA 10 3 10 2 10 1 0 10 20 V VR 30 Dark Current Dunkelstrom IR = f(TA), VR = 10 V, E = 0 IR OHF05549 102 nA 101 100 10-1 10-2 10-3 -25 0 25 50 75 C 100 TA 2014-01-14 5 Version 1.1 SFH 2504 Directional Characteristics Winkeldiagramm Srel = f() perpendicular to leads OHF05551 100 Srel % 80 70 60 50 40 30 20 10 0 -90 -60 -30 0 30 deg 90 Directional Characteristics Winkeldiagramm Srel = f () parallel to leads OHF05552 100 Srel % 80 70 60 50 40 30 20 10 0 -90 -60 -30 0 30 deg 90 2014-01-14 6 Version 1.1 SFH 2504 Package Outline Mazeichnung Dimensions in mm (inch). / Mae in mm (inch). 2014-01-14 7 Version 1.1 SFH 2504 Recommended Solder Pad Empfohlenes Lotpaddesign 4.0 (0.157) 2.0 (0.078) o0.9 (0.035) 2.0 (0.078) Bohrung Hole 5.5 (0.216) 1.4 (0.055) o1.1 (0.043) 2.54 (0.100) CU - Metallisierung ca. 8 mm 2 pro Pad und Seite mit Lotstopplack CU - Area appr. 0.314 Inch 2 per pad and side with solder resist CU i Lotstopplack freier Bereich CU i No solder resist OHLP2855 TTW Soldering Wellenloten (TTW) IEC-61760-1 TTW / IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave C T 250 235 C - 260 C First wave Second wave Continuous line: typical process Dotted line: process limits T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 C 120 C 100 C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 2014-01-14 8 Version 1.1 SFH 2504 Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2014-01-14 9 Version 1.1 SFH 2504 Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2014-01-14 10 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Osram Opto Semiconductor: SFH 2504 AN23