oo a Desired Setting/Function Control Value Up Control Value Down. Quick Reference WwD1 U 1M Stations Operating Sequence & (Scroll to new value) (Scroll to new value) Temperature Setting: With Scroll Keys . With Radio Button Pre-Sets Changing Radio Button Pre-Set Values & or (Set Point displayed for 3 seconds) >. or W(Scroll to new Valuc} T1q rll, or pili] (Momentarily depress Radio Button indicating desired Pre-Set temperature value) "+ A or W( Depress & or Wuntil desired new Pre-Set Value is indicated in large display) . r!q,r lq, or pill 1(To assign value depress and hold desired Radio Button until Pre-Set Display stops blinking) Selecting Menu 7 Menu Navigation Setting Value for Menu Items aA+Y (Depress & W simultaneously and hold for (2) Seconds. Release when 1 appears in display.) r!4 - Backward (previous item in menu) rll+ - Forward (next item in menu) rll - Exit menu and enter all new values into memory Aor | STANDBY (temperature) 200F (93C) - 600 F (316C) | SETBACK (time - min) 0 min (default Setback off}; On (controlled to standby temp. when tool placed in Stop and Go stand); 1-89min (SETBACK On to . specific time settings) AUTO OFF (time - min} O min (default Auto off switched off); 1-999min (epectii fi time _ settings) OFFSET (temperature) 48-72 F (40"C) ( WINDOW (temperature) . : 41-180" F(99 C)_- Half of setting above and.half below locked temp F /C (unit of measure) FC - - Up or Down Scroll key will toggle unit of measure LOCK On"rOrr ~ code selectable 1-999. For fost codes, in Menu 1 depress and hold RB1 for 9-digit number in-Pre-Set area of display ~ Selecting Menu 2 A + (Depress A simultaneously and hold for (4) Seconds, Release when 2 appears in the display.) - Special Functions Menu 2. Range of Values - eae aa ID 0-999 (Fort use with USB and software identification) FCC (Factory Control Check) Wow 212 F(100C) & High 842 F(450 C) Offset per measurement reading of external instrument +/- 72 F(40C) -.|- RB2 to enter offset value RB3 to exit and saveoo Mt CD 4 To Lock Station (From Lock in Menu 1) Code with & or Wr Il 4 Scroll to desired code>Depress RB3 for 5 secs or until large display stops blinking To Unlock Station (From Lock in Menu 4) Code with A or > Ill 4 Scroll to code After code is entered, depress RB3 momentarily to enter, exit, unlock Factory Reset (From Menu dor 2}* rll and Hold A+ (Depress and hold RB3 then Up and Down Scrolt keys simultancously. Release three keys when FSE appears in display.) *Factory Reset can be performed from any Menu 1 function on any channel. It resets all Menu 1 and most Menu 2 functions for all channels to factory default values. It does not reset temperature offsets previously entered in the Menu 2 FCC function for any channel. Factory Reset from Menu 2 can only be performed from the FCC function of any channel, It specifically resets FCC function offsets for all channels to factory default values and does not reset other Menu 1 or Menu 2 functions. Setback and Auto Off Settings: 0 0 Soldering tool remains at the Set soldering temperature. ON 0 Time Soldering tool is switched off when not in use") after the OFF time has elapsed. ON Soldering tool is controlled down when not in use to the STANDBY temperature) after the SETBACK time nas elapsed. . . Soldering tool is controlled down when not in use) to the STANDBY temperature) after the SETBACK time Time Time hy : . | d Time 0 0 0 soldering is switched off in the holde ON 0 Soldering tool is controlled to the STANDBY temperature) when in the holder)- 0 Time Soldering tool is switched off after the OFF time has elapsed when in the holder. ON rime Soldering tool is controlled to the STANDBY temperature) and is switched off after the OFF time has elapsed when in the holder)- . Soldering tool is controlled to the STANDBY temperature after the SETBACK time has elapsed when in Time 0 ) the holder? Time Time Soldering tool is controlled to the STANDBY temperature?) after the SETBACK time has elapsed and is switched off after the OFF time has elapsed when in the holder). 1) Not in use = UP/DOWN Scrolf Keys not depressed and no temperature drop > 9F ( 5C ). 2) STANDBY temperature must be below the Set temperature, otherwise the SETBACK function is inactive. 3) When a switching holder is connected, the soldering fool always remains at the Set temperature outside the holder. The holder function is activated when the soldering tool is placed in the holder for the first time. Note Reset of STANDBY and AUTO OFF modes: without switching holder, by depressing the UP or DOWN Scroll Keys. with switching holder, by removing the soldering tool from the holder. Minimum/Maximum Settings: Power WD1 95 watts (1 channel operating 1 tool up to 80 watts) WDiM > April 2007; 160 watts (1 channel operating 1 tool up to 150 watts) Too! Temperature WSP150 & WP120 Soldering Irons 150F - 950F (50C - 550C) Soldering Tools 150F - 850F (50C - 450C)