Tools for Telecom, Fiber Optics, CATV,
Wireless and Electronics Industries
Div. of Jonard Industries
Catalog No. 110
Installation • Maintenance • Repair
OVER 50 YEARS OF MANUFACTURING EXCELLENCE
OVER 50 YEARS OF MANUFACTURING EXCELLENCE
Div. of Jonard Industries
2
Established in 1958; Jonard Industries Corp is a prime manufacturer of Tools for the
Telecom, Fiber Optic, CATV and Electronic Industries with designs for installation,
maintenance and repair. The company was founded by engineers and technically
oriented professionals whose spirit, guidance and influence continue to this very day.
Jonard products are used in diversified applications. Our tools are used on “Airforce-
One”, the space shuttle, nuclear submarines, and down to earth applications such
as computers, telephone installations and production lines.
We are proud to include AT&T, IBM, Hewlett Packard, Boeing, United Technologies,
Comcast, Time Warner and many other prestigious companies on the list of satisfied
Jonard customers. Our customers now number in the tens-of-thousands, due to our
reputation, technical skills, dedication and our ability to meet their ever-increasing
demands.
Established in 1946; OK Industries blossomed as a major force in the
telecommunications and electronics industries. In February 2003 Jonard Industries
merged the operations of OK Industries into the “Jonard Family of Companies.” The
result of this acquisition is a Global Manufacturing Powerhouse with over 100
years of combined experience.
© Copyright 2008 Jonard Industries Corp.
134 Marbledale Road, Tuckahoe, New York 10707 • email: sales@jonard.com
Phone: (914) 793-0700 • Fax: (914) 793-4527
Website: www.jonard.com
DESIGN TECHNOLOGY PRECISION QUALITY
Established 1958 Established 1946
TABLE OF CONTENTS
OK INDUSTRIES
PAGES
Power Series Wrap/Unwrap Tools 5-6
DFB Wrap/Unwrap Bit & Sleeve Sets 7
Manual Wire Wrap/Unwrap Tools 8,9,13
Wire Wrapping Bits & Sleeves 10-12
Hand Wrapping & Unwrapping Tools 14-16
Socket Wrap ID Tags 16
Wire 17
Copper Wire Cut & Strip Tools 18-19
Desolder Pumps 20
Fume Absorbers 21
Insertion/Extraction Tools 22
Punchdown Tools 23
JONARD INDUSTRIES
Pliers 24-30
CATV & Fiber Optic Tools 31-39
Nut Drivers, BNC, F 36
Torque, Speed, Combination Wrenches 37
Can, Booth, Lineman’s Wrenches 38
Insulated Tools 39
Pay Telephone Tools, screwdrivers, spudger 40
Telecommunication Tools 40-41
Wire Wrapping Tools 42-45
Connector Tools 46
Spring Hooks 47
Alignment Tools 48
Burnishers 49
Force Gauges 50
Knockout Kit 51
3
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
By bending the wire around the sharp corner
of the terminal, the oxide layer on both wire
and terminal is crushed or sheared, and a clean,
oxide-free metal-to-metal contact is obtained.
A “Regular” bit wraps the bare wire around the terminal.
A “Modified” bit wraps a portion of insulation around
the terminal in addition to the bare wire.This
greatly increases the ability to withstand vibration.
Regular Modified
In. .010 .015 .020 .025 .030 .035 .040 .045 .050 .055 .060 .065 .070 .075 .080 .085 .090 .095 .100
mm 0.25 0.38 0.51 0.64 0.76 0.89 1.02 1.14 1.27 1.40 1.52 1.65 1.78 1.91 2.03 2.16 2.29 2.41 2.54
.010 .014 .018 .022 .027 .032 .036 .041 .046 .051 .056 .061 .066 .071 .076 .081 .086 .091 .096 .101
0.25 0.36 0.46 0.56 0.69 0.81 0.91 1.04 1.17 1.30 1.42 1.55 1.68 1.80 1.93 2.06 2.18 2.31 2.44 2.57
.015 .018 .021 .025 .029 .033 .038 .043 .047 .052 .057 .062 .067 .072 .077 .082 .087 .092 .097 .102
0.38 0.46 0.53 0.64 0.74 0.84 0.97 1.09 1.19 1.32 1.45 1.58 1.70 1.83 1.96 2.08 2.21 2.34 2.46 2.59
.020 .022 .025 .028 .032 .036 .040 .045 .049 .053 .058 .063 .068 .073 .078 .083 .088 .093 .098 .103
0.51 0.56 0.64 0.71 0.81 0.91 1.02 1.14 1.25 1.35 1.47 1.60 1.73 1.85 1.98 2.11 2.24 2.36 2.49 2.62
.025 .027 .029 .032 .035 .039 .043 .047 .050 .056 .060 .065 .069 .074 .079 .084 .089 .094 .099 .104
0.64 0.69 0.74 0.81 0.89 0.99 1.09 1.19 1.27 1.42 1.52 1.65 1.75 1.88 2.01 2.13 2.26 2.39 2.52 2.64
.030 .032 .033 .036 .039 .042 .046 .050 .054 .058 .062 .067 .071 .076 .080 .085 .090 .095 .100 .105
0.76 0.81 0.84 0.91 0.99 1.07 1.17 1.27 1.37 1.47 1.58 1.70 1.80 1.93 2.03 2.16 2.29 2.41 2.54 2.67
.035 .036 .038 .040 .043 .046 .049 .052 .056 .060 .064 .069 .073 .078 .082 .087 .091 .096 .101 .106
0.89 0.91 0.97 1.02 1.09 1.17 1.25 1.32 1.42 1.52 1.63 1.75 1.85 1.98 2.08 2.21 2.31 2.44 2.57 2.69
.040 .041 .043 .045 .047 .050 .052 .056 .060 .064 .068 .072 .076 .080 .084 .089 .092 .097 .102 .107
1.02 1.04 1.09 1.14 1.19 1.27 1.32 1.42 1.52 1.63 1.73 1.83 1.93 2.03 2.13 2.26 2.34 2.46 2.59 2.72
.045 .046 .047 .049 .050 .054 .056 .060 .063 .067 .071 .074 .078 .083 .087 .091 .096 .101 .105 .109
1.14 1.17 1.19 1.25 1.27 1.37 1.42 1.52 1.60 1.70 1.80 1.88 1.98 2.11 2.21 2.31 2.44 2.57 2.67 2.77
.050 .051 .052 .053 .056 .058 .060 .064 .067 .071 .074 .078 .082 .086 .090 .094 .098 .103 .107 .111
1.27 1.30 1.32 1.35 1.42 1.47 1.52 1.63 1.70 1.80 1.88 1.98 2.08 2.18 2.29 2.39 2.49 2.62 2.72 2.82
Example: If “A”=.020”. “B”=.060”. The terminal diagonal is .063" as shown on chart.
Step 1: Bit, Sleeve and
Pre-Stripped Wire
Step 2: Wire Insertion
Step 3: Wire Anchoring
Step 4: Terminal
Insertion
Step 5: Finished
Connection
METAL-TO-METAL CONTACT
TYPES OF WRAP
TERMINAL DIAGONAL CHART
HOW TO MAKE WIRE
WRAPPED CONNECTIONS
Wire Size Min. number Min. strip
AWG Dia. Dia. of turns force
inches mm (Bare Wire) lbs. gms
16 .051 1.30 4 15 6800
18 .0403 1.00 4 15 6800
20 .032 0.80 5 8 3600
22 .0253 0.65 5 8 3600
24 .0201 0.50 6 7 3200
26 .0159 0.40 7 6 2700
28 .0126 0.32 7 5 2200
30 .0100 0.25 7 3.3 1500
*Conforms to MIL-STD-1130B
STRIP FORCE CHART*
SOME HINTS ON MAKING WRAPPED CONNECTIONS
OPEN WRAP & SPIRAL
WRAP
Just keep the OK tool on the
terminal until the wrap is
complete. Early removal can
result in spiral and open
wraps.
PIGTAIL
Wire wrapping is a precision
technique and the wrong bit and
sleeve just cannot do the job.
Improper selection can cause
problems ranging from “Pigtails”
to loose wraps.
Wire Wrapping is a method of making a wire connection by coiling the bare wire around the sharp corners of a
terminal under mechanical tension. The technology was developed as an alternative to soldering, which presents
various safety and reliability problems in many applications. A principal advantage of wire wrapping is that it
provides a high-reliability connection that is also easily removed to correct or modify a wiring layout. Wire wrapping
subjects the wire to tremendous tension and compression forces, causing the oxide layer on both wire and terminal
to be crushed or sheared, resulting in a clean, oxide-free metal-to-metal contact. A standard wrap is generally used
for 24 AWG and larger diameter wires; a modified wrap is typically used for 26 AWG and smaller wires, and is used
almost exclusively for 28 to 30 AWG wires. In either case, the wrap style affects only the connection’s mechanical
stability; both styles provide suitable electrical connections.
WIRE WRAPPING OVERVIEW
INSUFFICIENT TURNS
It’s easy to feed wire into the slot in
the OK bit correctly. Be sure the
stripped end of the wire is “pushed-
in” all the way.
OVERWRAP
Do not press too hard. Let the OK
tools do the work. Excessive
pressure can lead to overwrapping.
Backforce "BF" to prevent
overwrapping is available on most
power tools and is recommended
for use with 26 through 30 AWG
wire.
DIMENSION A
DIMENSION B
A
B
4
INDUSTRIES CORP.
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
PTX SERIES ELECTRIC
WIRE WRAPPING &UNWRAPPING TOOLS
FSK-1
FSK-2
Catalog Number
FS-G-RG1
FS-G-RG2
FS-G-RG3
FS-G-RG4
FS-G-RG5
FS-G-RG6
FS-G-RG7
FS-G-RG8
FS-G-RG10
FS-G-RG15
Part No. Description Weight Voltage RPM
PTX-1 Electric Wrap/Unwrap Tool - 115V 2.0 lb. 115V 3700
PTX-1BF Electric Wrap/Unwrap Tool w/Backforce - 115V 2.0 lb. 115V 3700
PTX-2 Electric Wrap/Unwrap Tool - 230V 2.2 lb. 230V 4200
PTX-2BF Electric Wrap/Unwrap Tool w/Backforce - 230V 2.2 lb. 230V 4200
PTX-48 Electric Wrap/Unwrap Tool - 48V 2.0 lb. 48V 3700
The Patented PTX Series Wire Wrapping Tools from OK
Industries bring revolutionary new benefits to
installers, telecom technicians and other users. With
worker safety in mind, we consulted a certified
ergonomist and created an ergonomic tool, which
includes a lightweight, well-balanced construction,
dual-finger short-throw trigger, and a long handle to
mitigate pressure on the palm. These features help to
prevent repetitive stresses and result in an industry-leading
design from a comfort and safety standpoint. Ask for the
PTX Series Wire Wrapping Tools from OK Industries — and
arm your workers with the tools that offer efficiency
and worker safety in your interconnect activity.
KEY FEATURES
ACCESSORIES
ORDERING INFORMATION AND PRODUCT SPECIFICATIONS
!DFB224 Wrap/Unwrap Bit & Sleeve Set
!DFB2426Wrap/Unwrap Bit & Sleeve Set
!H-1000 Cordura Tool Pouch
High Power Motor
Reverses for
Unwrapping
Permanently
Attached
Collet Nut
Ergonomic,
Rugged
Tool Design
Wrap
Unwrap
Switch
!Ergonomic Design — Minimizes Repetitive Stress
!A 20’ Long Power cord
!Rugged Construction
!Wraps and Unwraps 18 to 30 AWG Wire
!Rated Maximum Usage: 2,500 cycles/day
!For Bits & Sleeves: see Pages 7, 10-12
H-1000
5
PATENTED
DFB224
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
PTX SERIES BATTERY
WIRE WRAPPING &UNWRAPPING TOOLS
BATTERY POWERED
LONG-LIFE NIMH BATTERY
For a complete listing of bits and sleeves- see pages 7, 10-12
PTX-B
PTX-BC1
H-1000
6
DFB224
The Patented PTX Series Wire Wrapping Tools from OK Industries
bring revolutionary new benefits to installers, telecom technicians
and other users. With worker safety in mind, we consulted a
certified ergonomist and created an ergonomic tool, which
includes a lightweight, well-balanced construction, dual-finger
short-throw trigger, and a long handle to mitigate pressure on the
palm. These features help to prevent repetitive stresses and result
in an industry-leading design from a comfort and safety
standpoint. Ask for the PTX Series Wire Wrapping Tools from OK
Industries — and arm your workers with the tools that offer
efficiency and worker safety in your interconnect activity.
KEY FEATURES
!Ergonomic Design — Minimizes Repetitive Stress
!Rugged Construction
!Wraps and Unwraps 18 to 30 AWG Wire
!Rated Maximum Usage: 2,500 cycles/day
!For Bits & Sleeves: see Pages 7, 10-12
Part No. Description Weight Voltage RPM
PTX Battery Wrap/Unwrap Tool (Battery not included) 1.1 lb. 3.6V* 3700
PTX-KIT1 115V battery tool kit (tool, charger, 2 batteries) 3.5 lb. 3.6V* 3700
PTX-KIT1DH PTX-KIT1 w/DFB224 and H-1000 3.6 lb. 3.6V* 3700
PTX-KIT2 230V battery tool kit (tool, charger, 2 batteries) 3.5 lb. 3.6V* 4200
* Powered by long-life NiMH battery
ORDERING INFORMATION AND PRODUCT SPECIFICATIONS
Low Battery Indicator
High Power Motor
Reverses for
Unwrapping
Permanently
Attached
Collet Nut
Ergonomic,
Rugged
Tool Design
Wrap
Unwrap
Switch
PATENTED
ACCESSORIES
!PTX-B PTX Battery, 3.6V
!PTX-BC1 115V BatteryCharger
!PTX-BC2 230V BatteryCharger
!H-1000 Cordura Tool Pouch
!DFB224 Wrap/Unwrap Bit & Sleeve Set
!DFB2426 Wrap/Unwrap Bit & Sleeve Set
INDUSTRIES CORP.
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
Min. Terminal Max. Terminal Terminal Terminal Hole Effective
Part # Description Wire Size Diagonal Diagonal Hole Depth Diameter Radius
AWG MM IN. MM IN. MM IN. MM IN. MM IN. MM
DFB224 Wrap/Unwrap Bit/Sleeve Set 22-24 AWG 22/24 .50/.65 .054 1.37 .073 1.85 0.50 12.70 .075 1.90 .111 2.82
KB-DF224 Replacement bit for DFB224
P-DF224 Replacement Sleeve for DFB224
DFB2426 Wrap/Unwrap Bit/Sleeve Set 24-26 AWG 24/26 .40/.50 .054 1.37 .065 1.65 0.50 12.70 .066 1.67 .098 2.48
KB-DF2426 Replacement bit for DFB2426
P-DF2426 Replacement Sleeve for DFB2426
The Wrap/Unwrap bit is shipped with the sleeve set in the wrap position. To change to the unwrap function simply
pull the sleeve out approximately 1/4” (the sleeve is spring loaded and you should feel some tension while pulling
forward), rotate the sleeve in either direction 1800and release. The sleeve should now be seated approximately 1/4”
lower than in the wrap position. This will expose the unwrap feature on the bit.
To change back to the wrap position pull the sleeve out approximately 1/2” and rotate the sleeve in either direction
1800and release. The spout should be in the 12:00 position and the sleeve should be locked in position.
Note: If you cannot rotate the sleeve, you need to pull the sleeve out further before trying to rotate the sleeve.
DFB224 & DFB2426 DUAL FUNCTION BIT/SLEEVE SETS
HOW TO USE THE DFB224 & DFB2426
DUAL FUNCTION
WRAP/UNWRAP BIT &SLEEVE SETS
This innovative Patented product represents a truly revolutionary approach to wire wrapping, by combining both the wrap
and the unwrap functions into one bit/sleeve set. The bit is precision machined for high quality wrapping in the clockwise
direction, but also includes the removal mechanism that is used to unwrap when operated counterclockwise. The user can
quickly and easily switch back and forth between wrap and unwrap mode by retracting or extending the retractable sleeve,
and flipping the switch on a wrap/unwrap power tool (i.e., a power wire wrapping tool with reversible motor). This product,
which can wrap or unwrap 22–26 AWG wire (depending on set), enables the user to maximize operating efficiency while
eliminating the need to purchase and carry extra tools or bits for unwrapping. Also, to prevent pin-to-pin shorting, the
retractable sleeve is coated with a durable 1000V dielectric material.
Note: The DFB set can only be used with the PTX or other powered wire wrapping tools with a reverse mode.
7
PATENTED
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
G100/R3278 Aluminum
MANUAL WIRE WRAPPING TOOLS
!G200/R3278 : Lexan™
!G100/R3278 : Aluminum
!G100/R3278INS : Aluminum (insulated)
!For Bits & Sleeves : see pages 10-12
MANUAL WIRE
WRAPPING TOOLS
G200/R3278 Lexan™
G100/R3278INS Insulated
For precise reliable wraps, choose the tool you
want. We offer durability with our rugged
aluminum tool, G100/R3278, added protection
with our insulated version, G100/R3278INS,
providing 1000V of dielectric strength across
most of the housing, and the same reliability,
light weight plus a lower cost with our Lexan®
model, G200/R3278. These tools accommodate
wire sizes from 18 AWG (1.00mm) thru 32 AWG
(0.20mm).
8
Also available– bits and sleeves for old
style chuckless wire wrapping tools
INDUSTRIES CORP.
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
The combination of the G100/R3394CT unwrap tool and the PUW unwrap bit &
sleeve set gives you the best tool for high speed wire unwrapping. High
production, long life, low maintenance. Use Unwrap Set PUW2226 for wire
AWG 20 thru 26 (0.80 thru 0.40mm).
Unwrap Bit Unwrap Sleeve Bit and Sleeve Set Wire Size Terminal Hole Diameter
Part No. Part No. Set No. AWG mm Inches mm
2026UB SOK2230 PUW2226 20-26 0.80-0.40 .070 1.77
G100/R3394CT
G100/R3278FL
!
G100/R3394CT :
Manual Wire Unwrapping Tool
(See bit & sleeve listed below)
MANUAL WIRE UNWRAPPING TOOL
G100-FL G100-FLA
Add the convenience of task lighting to your wire
wrapping gun with this Wire Wrapping Flashlight Kit.
Compatible with all wire wrapping tools.
This LED Flashlight Kit uses a standard AAA battery
(included). Mounted on a bracket, this attachment
installs in minutes and provides task lighting for those
poorly lit areas. Flashlight is positioned for both 3"
and 5" bits & sleeves so No Adjustments are necessary.
9
This tool combines the rugged durability of all metal construction with
an insulative material that provides 1000V dielectric strength across most of the housing, and an LED
flashlight for task lighting...No more working in the dark! The flashlight uses a standard AAA battery, which
can be easily changed. Flashlight is positioned for both 3” and 5” bits and sleeves so no adjustments are
necessary.
The G100/R3278FL provides up to ten revolutions per squeeze of the trigger, and can accommodate wire sizes from
18-32 AWG. This hand operated wire-wrapping tool uses interchangeable bits and sleeves. And when you use our
insulated sleeves, shorting between the pins of the main frame and other equipment is minimized.
MANUAL WIRE WRAPPING &
UNWRAPPING TOOLS
Part No. Construction For Use With
G100-FL Metal G100/R3278, G100/R3278INS, WG-350, WG-350INS
G100-FLA Plastic Universal-for use with most manual wire wrapping guns
WIRE WRAPPING FLASHLIGHT KIT
INSULATED MANUAL WIRE WRAPPING TOOL WITH LED FLASHLIGHT
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
3” BITS AND SLEEVES CHART (A W G )INCHES
BITS & SLEEVES WIRE WRAPPING
Fully compatible with any make or model wire wrapping tool. Modified bits provide 1 1/2–2 turns of insulation.
10
*These tools are recommended for .025" square terminals on .100” center to center of the pins
†
Provides 2.5 turns of insulation
Maximum Minimum Maximum Terminal Terminal
Wire Bit Sleeve Insulation Terminal Terminal Hole Effective Hole
Gauge Regular Modified Part No. Part No. Diameter Diagonal Diagonal Depth Radius Diameter
(AWG) Inches Inches Inches Inches Inches Inches
18 "KB18 P194LN .060 .073 1.000 .150 .075
20
"
WB20M P194LN .059 .042 .073 1.000 .150 .075
20-22
"
KB2075 P2224 – .042 .073 1.000 .123 .075
22
"
KB22 P2224 – .054 .073 .750 .117 .075
22
"
WB2275M P2224 .052 .049 .074 1.000 .132 .075
22-24
"
KB224LH P2224 –.061 .085 1.000 .117 .086
22-24
"
KB224-1 P2224 – .054 .073 1.000 .111 .075
22-24
"
KB224 P2224 – .054 .073 .807 .111 .075
22-24
"
WB224M P2224 .050 .049 .074 1.250 .121 .075
24
"
WB24DH P2224 .046 .054 .073 1.750 .117 .075
24
"
KB24 P2426 – .055 .074 .750 .100 .075
24
"
WB24SM*P3032LN .044 .024 .043 .750 .098 .044
24-26
"
WB2426M P2224 .046 .054 .073 .750 .118 .075
26
"
KB26 P2426 –.058 .073 1.000 .100 .075
26
"
WB26SM*P26LN .031 .023 .038 .750 .075 .040
26
"
WB26M P2224 .046 .054 .073 1.000 .118 .075
26
"
WB2644M*P3032LN .046 .024 .043 .750 .098 .044
26
"
WB2669M P2426 .041 .053 .068 1.000 .109 .069
28
"
WB2870M P2426 .034 .053 .068 1.000 .103 .070
28
"WB28SHM P3032 .030 .031 .035 .750 .066 .036
30
"
SB30MSH-B*P3032 .027 .031 .035 .750 .064 .036
30
"
SB30MMK*P3032 .023 .031 .035 .750 .064 .036
30-32
"
WB3032M*P3032 .027 .034 .038 .750 .064 .040
30-32
"
WB3032MIL†P3032 .027 .034 .038 .750 .064 .040
30-32
"
KB3032 P3032 - .034 .038 .750 .064 .040
INDUSTRIES CORP.
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
3” BITS AND SLEEVES CHART METRIC
BITS & SLEEVES WIRE WRAPPING
Fully compatible with any make or model wire wrapping tool. Modified bits provide 1 1/2–2 turns of insulation.
11
*These tools are recommended for .025" square terminals on .100” center to center of the pins
†
Provides 2.5 turns of insulation
Maximum Minimum Maximum Terminal Terminal
Wire Bit Sleeve Insulation Terminal Terminal Hole Effective Hole
Gauge Regular Modified Part No. Part No. Diameter Diagonal Diagonal Depth Radius Diameter
mm mm mm mm mm mm mm
1.00
"KB18 P194LN 1.52 1.85 25.40 3.81 1.90
0.80
"
WB20M P194LN 1.50 1.07 1.85 25.40 3.81 1.90
0.65-0.80
"
KB2075 P2224 – 1.07 1.85 25.40 3.12 1.90
0.65
"
KB22 P2224 – 1.37 1.85 19.05 2.97 1.90
0.65
"
WB2275M P2224 1.32 1.24 1.87 25.40 3.35 1.90
0.50-0.65
"
KB224LH P2224 – 1.54 2.15 25.40 2.97 2.18
0.50-0.65
"
KB224-1 P2224 – 1.37 1.85 25.40 2.82 1.90
0.50-0.65
"
KB224 P2224 – 1.37 1.85 20.50 2.82 1.90
0.50-0.65
"
WB224M P2224 1.27 1.24 1.87 31.75 3.07 1.90
0.50
"
WB24DH P2224 1.17 1.37 1.85 44.50 2.97 1.90
0.50
"
KB24 P2426 – 1.39 1.87 19.05 2.54 1.90
0.50
"
WB24SM*P3032LN 1.11 0.60 1.09 19.05 2.48 1.11
0.40-0.50
"
WB2426M P2224 1.17 1.37 1.85 19.05 2.99 1.90
0.40
"
KB26 P2426 –1.47 1.85 25.40 2.54 1.90
0.40
"
WB26SM*P26LN 0.79 0.58 0.96 19.05 1.90 1.02
0.40
"
WB26M P2224 1.17 1.37 1.85 25.40 2.99 1.90
0.40
"
WB2644M*P3032LN 1.17 0.60 1.09 19.05 2.48 1.11
0.40
"
WB2669M P2426 1.04 1.34 1.72 25.40 2.77 1.75
0.32
"
WB2870M P2426 0.86 1.35 1.72 25.40 2.61 1.78
0.32
"
WB28SHM* P3032 0.76 0.79 0.89 19.05 1.67 0.91
0.25
"
SB30MSH-B* P3032 0.69 0.79 0.89 19.05 1.62 0.91
0.25
"
SB30MMK* P3032 0.58 0.79 0.89 19.05 1.62 0.91
0.20-0.25
"
WB3032M* P3032 0.69 0.86 0.96 19.05 1.62 1.02
30-32
"
WB3032MIL†P3032 0.69 0.86 0.96 19.05 1.62 1.02
0.20-0.25
"
KB3032 P3032 - 0.86 0.96 19.05 1.62 1.02
The insulated sleeves are covered with a material that
provides 1000V dielectric strength which helps to prevent
shorting between pins and enhances worker safety.
SPECIALIZED BITS & SLEEVES
3” Bits and Insulated Sleeves
5” Bits and Sleeves (Extended Length)
Insulated and Non Insulated Sleeves
Minimum Maximum Terminal Terminal
Bit Sleeve Wire Size Regular Terminal Terminal Hole Effective Hole
Part No. Part No. Diagonal Diagonal Depth Radius Diameter
AWG mm In. mm In. mm In. mm In. mm In. mm
KB22 P2224INS 22 0.65
"
.054 1.37 .073 1.85 .750 19.05 .117 2.97 .075 1.90
KB224 P2224INS 22-24 0.50-0.65
"
.054 1.37 .073 1.85 .807 20.50 .111 2.82 .075 1.90
KB24 P2426INS 26 0.50
"
.055 1.39 .074 1.87 .750 19.05 .100 2.54 .075 1.90
KB26 P2426INS 26 0.40
"
.058 1.47 .073 1.85 1.000 25.40 .100 2.54 .075 1.90
KB3032 P3032INS 30-32 0.32
"
.034 0.86 .038 0.96 0.750 19.05 .064 1.62 .040 1.02
Insulated Uninsulated Minimum Maximum Terminal Terminal
Bit Sleeve Sleeve Wire Size Regular Terminal Terminal Hole Effective Hole
Part No. Part No. Part No. Diagonal Diagonal Depth Radius Diameter
AWG mm In. mm In. mm In. mm In. mm In.
KB22-5 P2224-5INS P2224-5 22 0.65
"
.054 1.37 .073 1.85 .750 19.05 .117 2.97 .075 1.90
KB24-5 P2426-5INS P2426-5 24 0.50
"
.055 1.39 .073 1.85 .750 19.05 .100 2.54 .075 1.90
KB26-5 P2426-5INS P2426-5 26 0.40
"
.058 1.47 .073 1.85 .750 19.05 .100 2.54 .075 1.90
These bits and sleeves are designed for wire wrapping in
areas requiring deep penetration. Their 5" (127mm)
length ensures “true” connections in hard-to-get-at
locations. Available with or without insulation.
Enjoy the convenience of pre-assembled sets with
insulated color-coded sleeves for easy identification of
wire sizes based on color.
P2426-5INS
KB24-5
3” Bit & Sleeve Sets With
Insulated Color Coded Sleeves
Sleeve Maximum Minimum Maximum Terminal Terminal
Bit Part No. Wire Size Regular Modified Insulation Terminal Terminal Hole Effective Hole
Part No. Color Diameter Diagonal Diagonal Depth Radius Diameter
AWG mm In. mm In. mm In. mm In. mm In. mm In. mm
KB22
P2224INS
22 0.65
"
– – .054 1.37 .073 1.85 .750 19.05 .117 2.97 .075 1.90
Blue
KB224
P2224INS
22-24
0.65-0.50
"
– – .054 1.37 .073 1.85 .807 20.05 .111 2.82 .075 1.90
Blue
KB24
SW-2426
24 0.50
"
––.055 1.39 .074 1.87 .750 19.05 .100 2.54 .075 1.90
Yellow
KB26
P2426-G-INS
26 0.40
"
–– .058 1.47 .073 1.85 1.000 25.40 .100 2.54 .075 1.90
Green
WB26SM
P26LN-R-INS
26 0.40
"
.031 0.79 .023 0.58 .038 0.96 .750 19.05 .750 1.90 .040 1.02
Red
Kit
Number
KT22B
KT224B
KT24Y
KT26G
KT26R
12
KB22
P2224INS
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
mm
JIC-2257
13
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
1
INDUSTRIES CORP.
G100/R3278INS
UW4
UW4
ST-100 KB224 P2224INS
HW-UW-224
MANUAL WIRE WRAPPING
TOOL KITS
These are complete kits for technicians working at a Main Distributing
Frame or for field service where wire wrapping is required.
WWK-CO Insulated Wire Wrapping Kit-
designed specifically for the Central Office.
WWK-1
TELECOM WIRE WRAPPING KITS
Part No.: WWK-1: Wire Wrapping Kit
Kit Contains: G200/R3278 Wire Wrapping Tool
KB224 bit 22-24 AWG
P2224 sleeve 22-24 AWG
HW-UW-224 Wrap/unwrap tool
ST-100 wire stripper 22-24 AWG
H-1000 Cordura Pouch
Part No.: WWK-CO: Wire Wrapping Kit
CENTRAL OFFICE
Kit Contains:
G100/R3278INS
Insulated Wire Wrapping Tool
KB224 bit
22-24 AWG
P2224INS Insulated sleeve
22-24 AWG
H-1000 Cordura Pouch
JIC-21257 Telecom long nose pliers
JIC-22035 Probe pick
UW4 Sleeved unwrapping tool
JIC-2257 Insulated wire loop puller
ST-100 G200/R3278
P2224 KB224
KB224 P2224INS
WWK-1INS
WWK-CO JIC-22035 JIC-21257
G100/R3278INS
Part No.: WWK-1INS: Insulated Wire
Wrapping Kit
Kit Contains:
G100/R3278INS Insulated
Wire Wrapping tool
KB224 bit 22-24 AWG
P2224INS Insulated sleeve
22-24 AWG
UW4 sleeved unwrapping tool
20-26 AWG
ST-100 Wire stripper 22-24 AWG
H-1000 Cordura Pouch
14
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
Wire Size Max. Insulation Terminal Hole Terminal Hole Outside
Part No. Reg. Mod. Type Diameter Diameter Depth Diameter
AWG mm Inches mm Inches mm Inches mm Inches mm
HW-20
"
A 20 0.80 – – .075 1.90 1.000 25.40 .218 5.53
HW-224
"
A 22-24 0.65-0.50 – – .075 1.90 .807 20.50 .218 5.53
HW-224LH
"
A 22-24 0.65-0.50 – – .086 2.18 1.000 25.40 .218 5.53
HW-26
"
A 26 0.40 – – .075 1.90 1.000 25.40 .218 5.53
HW-30*
"
30 0.25 .027 0.69 .036 0.91 .750 19.05 .125 3.17
*These tools are recommended for .025" (0.63mm) square terminals on .100" (2.54mm) centers
These tools are used to remove wire connections
made with 20 thru 32 gauge wire.
Type of Terminal Terminal Outside
Part No. Type Wire Size Unwrap Hole Diameter Hole Depth Diameter
AWG mm Inches mm Inches mm Inches mm
UW1 D 20-26 0.80-0.40 Left Hand .070 1.77 1.000 25.40 .156 3.96
UW2 C 20-26 0.80-0.40 Left and Right Hand .070 1.77 1.000 25.40 .156 3.96
UW4 B20-26 0.80-0.40 Left Hand .070 1.77 2.360 60.00 .187 4.74
UW5 B20-26 0.80-0.40 Left and Right Hand .070 1.77 2.360 60.00 .187 4.74
UW093R D 24-32 0.50-0.20 Left Hand .038 0.96 1.000 25.40 .093 2.36
UWD93-93 C 24-32 0.50-0.20 Left and Right Hand .038 0.96 1.000 25.40 .093 2.36
UW2832C B28-32 0.32-0.20 Left and Right Hand .038 0.96 .750 19.05 .156 3.96
Type “C”
H
HA
AN
ND
DU
UN
NW
WR
RA
AP
PP
PI
IN
NG
GT
TO
OO
OL
LS
S
HAND WRAPPING AND
UNWRAPPING TOOLS
H
HA
AN
ND
DW
WR
RA
AP
PP
PI
IN
NG
GT
TO
OO
OL
LS
S
These Hand Wrapping Tools are carefully designed to
produce perfect wire wrapped connections.
Precision, long-lasting tools for use where occasional
wraps are required or where power wire-wrapping
tools are not practical. Compact and convenient.
Type “B”
Type “A”
HW-30
Type “D”
Type “C”
To switch from wire wrapping to unwrapping takes
only seconds - just a quick change of the cap from
one end to the other.
H
HA
AN
ND
DW
WR
RA
AP
PP
PI
IN
NG
GA
AN
ND
DU
UN
NW
WR
RA
AP
PP
PI
IN
NG
GT
TO
OO
OL
LS
S
HAND WRAPPING AND
UNWRAPPING TOOLS
H
HA
AN
ND
DW
WR
RA
AP
PP
PI
IN
NG
GA
AN
ND
D
U
UN
NW
WR
RA
AP
PP
PI
IN
NG
GT
TO
OO
OL
LS
S
These Hand Wrapping and Unwrapping Tools are
carefully designed to produce perfect wire wrapped
connections. Precision, long-lasting tools for use
where occasional wraps are required or where
power wire-wrapping tools are not practical.
Compact and convenient.
15
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
Max. Terminal Terminal Terminal Terminal
Part Wire Size Insulation Hole Hole Outside Wire Size Hole Hole Outside
Number Reg Mod Diameter Diameter Depth Diameter Diameter Depth Diameter
AWG mm In. mm In. mm In. mm In. mm AWG mm In. mm In. mm In. mm
HW-UW-18-19
"
18-19 1.00-0.91 - - .075 1.90 1.000 25.40 .250 6.35 18-19 1.00-0.91 .075 1.90 1.000 25.40 .187 4.74
HW-UW-20
"
20 0.80 - - .075 1.90 1.000 25.40 .218 6.35 20-26 1.00-0.91 .070 1.77 1.000 25.40 .156 3.96
HW-UW-224
"
22-24 0.65-0.50 - - .075 1.90 .807 20.50 .218 5.53 20-26 0.80-0.40 .070 1.77 1.000 25.40 .156 3.96
HW-UW-224-1
"
22-24 0.65-0.50 - - .075 1.90 1.000 25.40 .218 5.53 20-26 0.80-0.40 .070 1.77 1.000 25.40 .156 3.96
HW-UW-2426
"
24-26 0.50-0.40 - - .075 1.90 .750 19.05 .218 5.53 20-26 0.80-0.40 .070 1.77 1.000 25.40 .156 3.96
HW-UW-26
"
26 0.40 - - .075 1.90 1.000 25.40 .218 5.53 20-26 0.80-0.40 .070 1.77 1.000 25.40 .156 3.96
HW-UW-26SM*
"
26 0.40 .031 0.79 .040 1.02 .750 19.05 .125 3.17 24-32 0.50-0.20 .038 0.96 1.000 25.40 .093 2.36
HW-UW-2829M*
"
28-29 0.32-0.29 .036 0.91 .040 1.02 .750 19.05 .156 3.96 24-32 0.50-0.20 .038 0.96 1.000 25.40 .093 2.36
HW-UW-30*
"
30 0.25 .027 0.69 .036 0.91 .750 19.05 .125 3.17 24-32 0.50-0.20 .038 0.96 1.000 25.40 .093 2.36
WRAPPING SIDE UNWRAPPING SIDE
*These tools are recommended for .025" (0.63mm) square terminals on .100" (2.54mm) centers. A modified wrap provides 1.5 – 2 turns of insulation.
16
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
WRAP/STRIP/UNWRAP TOOLS
Part No. Pins Row Spacing Qty./Pkg.
ID-8-100 8 .3" (7.5mm) 100
ID-16-100 16 .3" (7.5mm) 100
ID-18-50 18 .3" (7.5mm) 50
ID-20-50 20 .3" (7.5mm) 50
ID-22-50 22 .4" (10mm) 50
ID-24-50 24 .6" (15mm) 50
ID-28-50 28 .6" (15mm) 50
ID-40-25 40 .6" (15mm) 25
ID-96-25 96 .3" (7.5mm) 25
SOCKET-WRAP I.D.
™
Increase Wiring Speed and Reduce Errors.
Used to identify pin numbers on wire wrapping sockets.
Consisting of a socket-sized plastic panel with numbered
holes in the pin location, the Socket Wrap-ID is simply
slipped onto the socket before wrapping. You can also
write on them for easy identification of location, IC Part
number, function, etc. These unique items greatly
simplify both initial wire wrapping and subsequent
troubleshooting or repair. A great help to technicians,
and production facilities alike.
Each WSU tool wraps, unwraps and even strips the
appropriate wire diameter with a unique built-in
stripper blade. Ideal for bench use or tool kit in
all service and repair applications. In addition to
versatility, convenience, and reliability, the WSU
Series offers exceptional value.
WSU-26M
(Modified Wrap)
WSU-24M
(Modified Wrap)
WSU-30
(Regular Wrap)
WSU-30M
(Modified Wrap)
WSU-2224
(Regular Wrap)
WRAP / STRIP / UNWRAP TOOLS
PATENTED
Max. Insulation Terminal Hole Terminal Outside Square
Wire Size Diameter Diameter Hole Depth Diameter Post
AWG mm In. mm In. mm In. mm In. mm In. mm
22-24 0.65-0.50 .075 1.90 1.50 38.1 .213 5.4 .045 1.14
24 0.50 .036 0.92 .075 1.90 1.50 38.1 .213 5.4 .045 1.14
26 0.40 .034 0.86 .075 1.90 1.50 38.1 .213 5.4 .045 1.14
30 0.25 .036 0.91 1.50 38.1 .125 3.2 .025 0.63
30 0.25 .021 0.53 .036 0.91 1.50 38.1 .125 3.2 .025 0.63
Part No.
Reg Mod
WSU-2224
"
WSU-24M
"
WSU-26M
"
WSU-30
"
WSU-30M
"
These tools are recommended for .025” (0.63mm) square terminals on .100” (2.54mm) centers
17
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
Wire Dispenser - WD-30 Series
!
With 50ft. (15.2m) Roll of
30 AWG (0.25mm) Kynar®
wire-wrapping wire
!
Built-in Plunger cuts
wire to desired length
!
Built-in Stripper strips
1" (25.4mm)
of insulation
!
Refillable
Replacement Rolls of Wire
For WD-30 Series
Wire for wire-wrapping.
30 AWG (0.25mm) Kynar
®
wire,
50ft. (15.2m) roll, silver plated,
solid conductor easy stripping.
Part No. Description
WD-30-B Dispenser with 50’ of Blue wire
WD-30-Y Dispenser with 50’ of Yellow wire
WD-30-W Dispenser with 50’ of White wire
WD-30-R Dispenser with 50’ of Red wire
WD-30-TRI Dispenser with 50’ each Blue, White and Red wire
WD-30-B
R-30R-0050
WIRE WRAPPING ACCESSORIES
Part No. Description
R-30B-0050 30 AWG (0.25mm) Blue 50ft. for WD-30-B
R-30Y-0050 30 AWG (0.25mm) Yellow 50ft. for WD-30-Y
R-30W-0050 30 AWG (0.25mm) White 50ft. for WD-30-W
R-30R-0050 30 AWG (0.25mm) Red 50ft. for WD-30-R
R-30-TRI 30 AWG (0.25mm) Red, White, Blue
50ft (15.2m) roll, each color for WD-30-TRI
Pre-Cut and Pre-Stripped Wire Wrapping Wire
!
50 pieces
per package
!
Kynar®insulated
!
Silver plated
copper conductor
!
UL listed
!
1” of stripped wire
on either end
!
Add 2” to the insulation
length (see chart below)
for total length of wire
30 AWG (0.25mm) Pre-Cut/Pre-Stripped Wire 50 Pieces/Pkg.
Insulation
Length
In. mm White Yellow Blue Red
1 25 30-W-50-010 30-Y-50-010 30-B-50-010 30-R-50-010
2 51 30-W-50-020 30-Y-50-020 30-B-50-020 30-R-50-020
376 30-W-50-030 30-Y-50-030 30-B-50-030 30-R-50-030
5 127 30-W-50-050 30-Y-50-050 30-B-50-050 30-R-50-050
KSW Wire Wrapping Wire Rolls for Cut/Strip/Wrap Applications
Low strip force Kynar®insulated silver plated copper conductor wire is further processed to provide a low strip force for use
with CSW bits and sleeves. Ideally suited for wire wrapping and many other applications. OFHC (oxygen free high conductivity)
provides a flexible yet abrasion resistant wire
Wire Size Insulation Dia. Roll Size
AWG mm In. mm Feet Meters Blue Yellow White Black Red
24 0.50 .030 0.76 100 30.4 KSW 24B-0100 KSW 24Y-0100 KSW 24W-0100 KSW 24BLK-0100 KSW 24R-0100
26 0.40 .027 0.69 100 30.4 KSW 26B-0100 KSW 26Y-0100 KSW 26W-0100 KSW 26BLK-0100 KSW 26R-0100
28 0.32 .024 0.60 100 30.4 KSW 28B-0100 KSW 28Y-0100 KSW 28W-0100 KSW 28BLK-0100 KSW 28R-0100
30 0.25 .020 0.50 100 30.4 KSW 30B-0100 KSW 30Y-0100 KSW 30W-0100 KSW 30BLK-0100 KSW 30R-0100
1000 304.0 KSW 30B-1000 KSW 30Y-1000 KSW 30W-1000 KSW 30BLK-1000 KSW 30R-1000
KYNAR®Insulated, Silver Plated Copper Conductor
Ideally suited for wire wrapping and many other applications. OFHC (oxygen free high conductivity) provides a flexible yet
abrasion resistant wire
Wire Size Insulation Dia. Roll Size
AWG mm In. mm Feet Meters Blue Yellow White Black Red
24 0.50 .030 0.76 100 30.4 R24B-0100 R24Y-0100 R24W-0100 R24BLK-0100 R24R-0100
26 0.40 .027 0.69 100 30.4 R26B-0100 R26Y-0100 R26W-0100 R26BLK-0100 R26R-0100
28 0.32 .024 0.60 100 30.4 R28B-0100 R28Y-0100 R28W-0100 R28BLK-0100 R28R-0100
30 0.25 .020 0.50 100 30.4 R30B-0100 R30Y-0100 R30W-0100 R30BLK-0100 R30R-0100
1000 304.4 R30B-1000 R30Y-1000 R30W-1000 R30BLK-1000 R30R-1000
UL Listed
18
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
A revolutionary concept for easy and clean stripping of wires for wire
wrapping, electronic and appliance applications. Biomechanically
designed for maximum efficiency.
Easy to operate... place wire (up to 4) in stripping slot with ends
extending beyond cutter blades... press tool and pull... wire is cut and
stripped to proper “wire wrapping” length. The hardened steel
cutting blades and sturdy construction of the tool ensure long life.
Strip length easily adjustable for your application. Blades are made
from specially tempered spring steel for clean, nick-free wire
stripping.
The JIC-1022 Wire Stripper and Cutter is designed to strip
and cut the most commonly used stranded and solid wire
gauges 10 to 22 AWG and 1.6-3 mm fiber jackets. The JIC-
1626 Wire Stripper and Cutter is designed for 16 to 26 AWG
wire. The JIC-2030 Wire Stripper and Cutter is designed for
20-30 AWG wire.
Other features include a coil spring opening to reduce
fatigue, wire looping, bending holes conveniently located,
black oxide finish, locking mechanism, and cutting surfaces
that are hardened, tempered and ground for superior
performance. 6 3/4” long and weighing just 4.5 ounces.
Part No. Wire Size Adjustable Strip-Off Length Replacement
AWG mm Inches mm Blade
ST-100 22-24 0.65-0.50 1 5/16” to 1 9/16” 33.33 to 39.68 SB-2224
ST-100-2426 24-26 0.50-0.40
1 15/16” to 1 11/16”
39.68 to 42.86 SB-2426
ST-100-2830 28-30 0.32-0.25 7/8” to 1 1/8” 22.22 to 28.57 SB-2830
COPPER WIRE CUT & STRIP TOOLS
WIRE CUT-AND-STRIP TOOLS - ST-100 SERIES
WIRE STRIPPER AND CUTTER
Part No. Description
JIC-1022 Wire Stripper and Cutter 10-22 AWG
JIC-1626 Wire Stripper and Cutter 16-26 AWG
JIC-2030 Wire Stripper and Cutter 20-30 AWG
19
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
COPPER WIRE CUT & STRIP TOOLS
The OK-3907 Series from OK Industries is the industry’s
leading cut-and-strip tool for copper interconnect
applications. Installers and telecom technicians enjoy its
rugged construction, ergonomic plastic grips, and high-
leverage handle design, which allows time savings
through the simultaneous cutting of multiple wires.
Blades are made from specially tempered spring steel for
clean, nick-free wire stripping.
ADJUSTABLE PRECISION WIRE
S T R I P P E R S O K - 3 9 0 7 SERIES
Part No. Wire Size Adjustable Strip-Off Length Replacement
AWG mm Inchs mm Blade
OK-3907-2224 22-24 0.65-0.50 1-1⁄2" to 1-3⁄4" 38.10 to 44.45 SB-2224
OK-3907-2426 24-26 0.50-0.40 1-1⁄2" to 1-3⁄4" 38.10 to 44.45 SB-2426
OK-3907-2830 28-30 0.32-0.25 7/8” to 1 1/8” 22.22 to 28.57 SB-2830
These Precision Wire Strippers feature an
adjustment dial that allows the operator to
select one of six different settings. A
calibrated wire stop can then be adjusted
for the desired insulation strip length. In a
single motion, the operator squeezes and
pulls the tool. This action engages four
specially hardened blades to cleanly cut the
wire insulation while the pulling motion
breaks the insulation / conductor bond.
Part No. ST-450 ST-500 ST-500ESD ST-550
For ESD Use
Wire Gauge 26-36 AWG 20-30 AWG 20-30 AWG 18-28 AWG
0.40 to 0.12mm 0.80 to 0.25mm 0.80 to 0.25mm 1.00 to 0.30mm
Housing Material ABS ABS ESD Safe Polycarbonate ABS
OOKK--33990077
!Adjustable to six wire gauges:
ST-450 26 to 36 AWG (0.40 to 0.12mm)
ST-500 20 to 30 AWG (0.80 to 0.25mm)
ST-500ESD 20 to 30 AWG (0.80 to 0.25mm)
ST-550 18 to 28 AWG (1.00 to 0.30mm)
!Calibrated Wire Stop adjustable to 2” (50.8mm)
!Clean, precise strip of any insulation type
!Lightweight-weighs 1 oz.
!Blade is hardened steel (RC58)
!Dimensions 3.9” x 1.6” x 0.6”
(99 mm x 42 mm x 14 mm)
ST-550
ST-500ESD
ADJUSTABLE PRECISION WIRE STRIPPERS
SSBB--22222244
SSBB--22442266
SSBB--22883300
DESOLDERING PUMPS
Features
!Precision regulated return.
!Replaceable tip.
!Compact, anti-corrosive plastic housing.
!Precision metal plunger.
!Sealed vacuum chamber.
!Easy cleaning.
!8” Long including tip
Part No. Description
DP-140 Desoldering Pump
DPT-100 1 Replacement Tip, DP-100/DP-140
A specially engineered desolder pump made to exacting specifications and providing precise
repeatable operation. Fitted with a Teflon Tip. 13” long including tip
HIGH-VACUUM DESOLDERING PUMPS
Features
!
Durable corrosion resistant
plastic construction.
!
Precision metal plunger.
!
Corrosion treated springs.
!
Insulated vacuum pulse.
!
Regulated return (1 millisecond ±30%).
!
Uniform reset pressure (11in. lbs. ±20%).
!
Cushioned shock reduction (pulse release
to minimize board damage).
Part No. Description
DP-100 High Vacuum Desoldering Pump
DP-200 High Vacuum Desoldering Pump, ESD Safe
DPT-100 1 Replacement Tip, DP-100/DP-140
DPT-200 1 Replacement Tip, DP-200
STATIC SAFE
DP-140
DP-100
DP-200
20
DPT-100
DPT-200
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
Specifications
Part No. SA-9-115 SA-91
SA-9-E-115 SA-91-E
Input Voltage 115V 115V
60Hz 60Hz
Maximum Air
Volume 105 to 126 CFM 105 to 126 CFM
Activated
Carbon Wt. 12g 12g
Unit Weight 2.2 lbs. (1 kg) 4 lbs. (1.8 kg)
Arm Length - 24" (607mm)
BENCHTOP FUME ABSORBERS
STATIC SAFE
SA-91/ SA-91-E
!Articulating arm allows
optimized positioning and
saves bench space.
!Bench mounting clamp and 3
filters come complete with
unit.
!SA-91-E features a
static-dissipative housing.
!
Aerodynamic hood design
effectively draws irritating
soldering fumes away from the
work area.
!
Carbon-impregnated filters trap a
limited portion of the flux fumes.
!
Compact size, low profile and
adjustable stand allows convenient
placement 6" to 8"
(152 to 203mm) from work area.
!
SA-9-E-115 feature
static-dissipative housings.
Part No. Description
SA-9-115 Benchtop fume absorber, 115V AC with 3 filters
SA-9-E-115 ESD-Safe benchtop fume absorber, 115V AC with 3 filters
Part No. Description
SA-91 SA-9-115 with Articulating Arm, & Bracket
SA-91-E SA-9-E-115 with Articulating Arm, & Bracket
SAK-90 Arm Assembly Kit Retro-fits SA-9/9-E to SA-91/SA-91-E
SAF-1 Replacement Filter Set, 3pcs.
SA-9-115 SA-9-E-115
Benchtop
Articulating Arm
SA-9-115/ SA-9-E-115
SAF-1
21
SA-91
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
IC INSERTION EXTRACTION TOOLS
UNIVERSAL PLCC EXTRACTION TOOL EX-5/EX-6
INSERTION/EXTRACTION KIT WK-7
Part No. Description
EX-5 ESD safe PLCC extraction tool
EX-6 PLCC extraction tool
Features
!Extracts a range of PLCC sizes from 20 pins through 128
pins from any socket without damage to the chip.
!Spring loaded one-hand design requires no pulling, just
squeeze handles and chip is lifted from the socket.
!ESD safe handles for use on all static safe
components (EX-5).
!Machined stainless steel for long-life (EX-5).
!EX-6 - ABS handles and stamped steel.
Part No. Description
WK-7 5 piece insertion/extraction kit
Note: WK-7 items may be purchased individually.
WK-7 kit includes DIP IC extractors and inserters to
accommodate all IC’s from 8 to 40 pins. All tools are
CMOS safe and include grounding lugs where
appropriate except EX-1. The kit consists of extractors
EX-1 for 8-24 pin devices, and EX-2 for 24-40 pin ICs,
plus inserters MOS-1416, MOS-2428, and MOS-40 for
14-16, 24-28 and 36-40 pin IC’s respectively.
MOS-2428
(.6” Pitch)
EX-1 MOS-40
(.6” Pitch)
EX-2 MOS-1416
(.3” Pitch)
Kit Includes
!EX-1 Extraction Tool (8-24 Pins).
!EX-2 Extraction Tool (24-40 Pins).
!MOS-1416 Insertion Tool (14-16 Pins).
!MOS-40 Insertion Tool (36-40 Pins).
!MOS-2428 Insertion Tool (24-28 Pins).
EX-6
EX-5
STATIC SAFE
D
DI
IP
P/
/I
IC
C E
EX
XT
TR
RA
AC
CT
TO
OR
R
This is a one-piece insulated spring steel
extractor used to extract LSI, MSI and SSI
devices from 8 to 24 pins. Will remove all
types of DIP/IC's without bending pins.
4” long.
Part No. Description
SS--334400DIP/IC Extractor
SS--334400
22
INDUSTRIES CORP.
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
PUNCHDOWN TOOLS
Insulation displacement connections to properly seat and trim wires used with connectors. Make
effortless and uniform connections.
A REVOLUTIONARY ERGONOMIC DESIGN GUARANTEEING OPERATOR SAFETY & EFFICIENCY
E P B - 1000
Battery Punchdown Tool
• Ergonomically designed for worker safety
• Over 1,000 impacts between charges
• Hi/Low impact settings
• 90˚ Blade orientation adjustment
• Quick-easy blade lock and release
• Lightweight
•Measures 7.50”L x 6.75”H x 1.37”W
• Patented
Quick, easy blade
lock & release
Ergonomically designed handle
Ability to rotate blade
in 90˚ increments
Hi/Low impact settings
Rugged construction
Short-throw
trigger
EPB-66 EPB-110 EPB-KR
EPB-1000 TOOLS AND KITS
ITEM DESCRIPTION
EPB-1000 Battery Punchdown Tool (Battery Not Included)
EPB-KIT1 Battery Punchdown Tool 115V Charger, Battery, plus 66 & 110 Blades
EPB-KIT2 Battery Punchdown Tool 230V Charger, Battery, plus 66 & 110 Blades
EPB-1000 ACCESSORIES
PART
NUMBER DESCRIPTION
EPB-B EPB-1000 NiMH Battery 3.6V
EPB-BC1 EPB-1000 115V Battery Charger
EPB-BC2 EPB-1000 230V Battery Charger
EPB STANDARD DOUBLE-ENDED BLADES
PART
NUMBER DESCRIPTION
EPB-66 66 Blade with & without cutter
EPB-110 110 Blade with & without cutter
EPB-KR Krone Blade with & without cutter
EPB-500
Manual Punchdown Tool
EPB-500 TOOLS AND KITS
ITEM DESCRIPTION
EPB-500 Punchdown Tool
EPB-KIT66 Punchdown Tool Plus 1 Blade (EPB-66)
EPB-KIT110 Punchdown Tool Plus 1 Blade (EPB-110)
EPB-KIT66110 Punchdown Tool Plus 2 Blades (EPB-66, EPB-110)
Storage compartment
holds 2 blades
Quick, easy blade
lock & release
Ergonomic handle with
soft overmolded grip
Flared front prevents
slipping of hand
PATENTED
23
High/low impact
adjustment dial
24
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
HIGH LEVERAGE DIAGONAL CUTTER
Crafted for heavy-duty wire cutting and made of
specially forged alloy steel designed for strength and
cutting ability. Red plastic handle 8” long
JONARD
P/N DESCRIPTION
JJIICC--22228888High Leverage Diagonal Cutter
JJIICC--668833
SSIIDDEECCUUTTBB99
PLIERS-HEAVY DUTY
JJIICC--22228888
JJIICC--6633005500
JJIICC--775500
HIGH LEVERAGE CABLE CUTTERS
High leverage design for superior cutting ability.
Designed with a shear-type jaw for cutting
aluminum and soft copper. Not for use on steel or
ACSR type cables. Cuts up to 100-pair cables. Red
plastic handle 9 1/2” long
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--6633005500High Leverage Cable Cutters
3/ 4” COAX CABLE CUTTER
Also known as a Banana Cutter, this cutter is
designed to cut 3/ 4” coaxial cable. Tool cuts cleanly
without compressed or frayed ends. Functions like a
tube cutter – eliminates cable distortion during
cable prep. NOT designed to cut steel cable. Yellow
plastic handles. 8” long
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--7755003/4” Coax Cable Cutter
LINEMAN’S B SIDE CUT PLIERS
Designed for heavy duty use in construction and
maintenance work. These pliers are high leverage for
cutting bolts, nails, and many gauges of wire
including high-strength wire. Cutting edges cut clean
and remain sharp. The cushioned-grip, comfortable
handles are red plastic to approximately .007”. 9 3/8”
long. Also known as SIDECUTB9
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--668833Lineman’s B Side Cut Pliers
25
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
CRIMPING PLIERS
CONNECTOR-CRIMPING PLIERS WITH SIDE CUTTERS
Connector-Crimping Pliers with Side Cutters designed
to press UG, UR, UY, 709 series connectors, crimping
"B" type connectors, and AMP tel splice connectors.
A special stop behind cut out prevents damage to
connectors. Utilized on combinations of plastic and
pulp insulated 19, 22, 24 and 26 gauge copper
conductors as well as 20 gauge plastic insulated
copper steel wire. Comes with side cutter and yellow
plastic handle 6" long. Also known as PRESSINGC.
JJOONNAARRDD
P
P/
/N
ND
DE
ES
SC
CR
RI
IP
PT
TI
IO
ON
N
J
JI
IC
C-
-8
89
91
1Connector-Crimping Pliers with Side Cutters
JIC-891
PRESSINGC
JIC-22148
JIC-056
LONGNOSEG
LONG NOSE G PLIERS
This plier is designed with a long nose to close 700,
701 & 702 style connectors. Knurled jaws to facilitate
gripping wire, red plastic handle 6 5/8” long. Also
known as LONGNOSEG.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--005566Long Nose G Pliers
COMBO CRIMPER LONG NOSE PLIERS
Five tools in one, combines crimper for UR/UY/UG,
AMP tel splice connectors, 709 series connectors,
crimping "B" type connectors and a long nose pliers.
With a crusher, cutter, .030" stripping hole, and
yellow plastic handle 6 7/8" long.
JJOONNAARRDD
P
P/
/N
N
DDEESSCCRRIIPPTTIIOONN
JJIICC--2222114488Combo Crimper Long Nose Pliers
LONG NOSE PLIERS
26
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
TELECOM LONG NOSE PLIERS
Long nose have side cutting blades, a crushing slot,
one .030” stripping hole, and a thin knurled nose to
facilitate handling of the wire at the terminals. The
comfortable handles are yellow plastic.
6 7/8" long. Also known as KS21257L1.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--2211225577Telecom Long Nose Pliers
LONG NOSE CUT CRUSH STRIP L2 PLIERS
Side cut pliers with crushing slot, one .030” stripping
hole and a thin knurled nose to facilitate handling
wire at the terminals. Aluminum oxide insulation
coating on the outside nose surface. Yellow plastic
handle, 6 7/8” long.
JONARD
P/N DESCRIPTION
KKSS2211225577LL22LONG NOSE
L2 Cut Crush Strip Pliers
LONG NOSE CUT CRUSH STRIP L3 PLIERS
Long nose with side cutter, crushing slot, one .030”
stripping hole and a thin knurled nose to facilitate
handling wire at the terminals. Yellow plastic handle.
6 3/16” long.
JONARD
P/N DESCRIPTION
KKSS2211225577LL33LONG NOSE L3 Cut Crush Strip Pliers
KKSS2211225577LL22
JJIICC--2211225577
KKSS2211225577LL11
KKSS2211225577LL33
KKSS2211225577LL44
JONARD
P/N DESCRIPTION
KKSS2211225577LL44LONG NOSE L4 Cut Crush Strip Pliers
LONG NOSE CUT CRUSH STRIP L4 PLIERS
Long nose with side cutter, crushing slot, one .030”
stripping hole and a thin knurled nose to facilitate
handling wire at the terminals. Aluminum oxide
insulating coating on the outside nose surface.
Yellow plastic handle. 6 3/16” long.
27
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
1
INDUSTRIES CORP.
LONG NOSE GRIPPING PRESSING PLIERS
Long nose pliers for gripping and pressing. Inner
surface of the jaws are knurled near the end to
facilitate gripping wire, binding post nuts etc.
Aluminum oxide insulation coating on the outside
nose surface. The inside gripping jaws are provided
with mated grooves near the joint for use in pressing
.032/.035” brass sleeves. Orange plastic handle,
6 5/8” long.
JONARD
P/N DESCRIPTION
EELLOONNGGNNOOSSEELong Nose Gripping Pressing Pliers
LONG & SHORT NOSE PLIERS
EELLOONNGGNNOOSSEE
BBSSHHOORRTTNNOOSSEE
SHORTNOSE PLIERS
Intended for use in skinning 22-24 AWG wire and
crushing insulation in nose slot. The front portion of
the jaws is narrowed, and a portion of the inner face
of one jaw is relieved to skin insulation from wire.
The inner surface of the jaws are serrated to
facilitate gripping wire. Orange plastic handle 6
3/16” long.
JONARD
P/N DESCRIPTION
BBSSHHOORRTTNNOOSSEEShortnose pliers
JJIICC--884422
BBLLOONNGGNNOOSSEE
TELECOM LONG NOSE D PLIERS
Pliers are for general use looping, bending and
cutting. Grips small wires and parts and reaches into
tight spaces. Jaws are knurled, serrated and have side
cutting blades. Cushion gripped yellow plastic handle
6 7/8” long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--884422Telecom Long Nose D Pliers
LONG NOSE GENERAL USE PLIERS
Chain nose pliers for general use. Inner surface of the
jaws are knurled near the end to facilitate gripping
wire, binding post nuts etc. Orange plastic handle,
6 5/8” long. Ask for the DLONGNOSE which is
identical to the BLONGNOSE but has an aluminum
oxide insulating coating on the outside nose surface.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
BBLLOONNGGNNOOSSEELong Nose General Use Pliers
28
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
DIAGONAL PLIERS
DDIIAAGGBB55
DIAGONAL GENERAL USE PLIERS
These are plain diagonal pliers for general use, for
cutting soft copper conductors. Red plastic handle,
5 1/16” long.
JONARD
P/N DESCRIPTION
DDIIAAGGBB55Diagonal General Use Pliers
JJIICC--77885588
DDIIAAGGDD66
DIAGONAL PLIERS – SKINNING & STRIPPING
Tapered nose diagonal cutting pliers with standard-
bevel knives with one .045” skinning hole, crusher
used for multipurpose wire work, and two V shaped
stripping notches. Red plastic handle 6 1/16” long
JONARD
P/N DESCRIPTION
DIAGB6 Diagonal Pliers –
Skinning & Stripping
DDIIAAGGBB66
DDIIAABBVVNNOOTTCCHH
TELECOM DIAGONAL CUTTER PLIERS
Tapered nose diagonal cutting pliers with standard-
bevel knives with .030" and .045" skinning holes,
with crusher used for multi-purpose wire work, with
two V-shaped stripping notches. The comfortable
handles are red plastic. 6 1/2” long.
Also known as DIAGD6.
JONARD
P/N DESCRIPTION
JJIICC--77885588Telecom Diagonal Cutter Pliers
DIAGONAL PLIERS – CRUSHING & SLITTING
Used for cutting soft copper conductors. Has a “V”
shaped notch between jaws, near the joint, for
crushing the flameproof type of insulation on
distributing frame wire. Also provides a “W” shaped
notch on the plier jaws for slitting textile insulation.
Red plastic handle 5” long.
JONARD
P/N DESCRIPTION
DIABVNOTCH Diagonal Pliers –
Crushing & Slitting
29
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
SPECIALTY PLIERS
SLIP JOINT SIDE CUT PLIERS
For heavy-duty use. Polished head, black handles
and flush bolt. Machined gripping teeth and 3/8”
hardened wire cutter. 7 3/8” long.
JONARD
P/N DESCRIPTION
BBCCOOMMBBSlip Joint Side Cut Pliers
FLUSH CUT PLIERS - JIC-453
A close cutting plier used to trim conductors from the
710 connector modules without leaving exposed
conductors. Ideal for close trimming of gates and
sprue on injection molded plastic parts. Jaw design
aids in use in confined areas.
Turquoise color handle, plier is 4 1/2" long
BBCCOOMMBB
PPLLSS--55
JJIICC--445533
SS--4422
HEAT COIL PLIERS
Designed for installing and extracting heat coils,
fuses and other cylindrical shaped components. The
thin nosed jaw allows easy access to tight restricted
areas. Yellow plastic handle, 5 1/8” long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
PPLLSS--55Heat Coil Pliers
LAMP CAP EXTRACTOR PLIER
For use in inserting and extracting switchboard lamp
caps. Yellow plastic coated comfort design handles.
Plier is 5" long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
S-42 Lamp Cap Extractor Plier
JONARD
P/N DESCRIPTION
JJIICC--445533Flush Cut Pliers
30
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
CURVED NOSE & PUMP PLIERS
PUMP PLIERS
Manufactured with a secure tongue and groove
design for a non-slip grip (even under heavy
pressure).
The jaws provide a wide range of openings with a
smooth, positive interlock between halves. Handles
are plastic coated,but are not insulated and do not
protect against electric shock.
JONARD
P/N DESCRIPTION
JJIICC--55002266Pump Pliers 6” long
JJIICC--5500221100Pump Pliers 10” long
JJIICC--5500221122Pump Pliers 12” long
JJIICC--55002266
JJIICC--5500221100
JJIICC--33338855
JJIICC--33002266
CURVED LONG NOSE PLIER
Nose is bent 70° for maximum visibility. Used in
confined areas. Design includes knurled jaws for sure
wrapping and looping. Comfortable ergonomic
handles. Length 6 3/8" with yellow plastic handle.
CURVED NEEDLE NOSE PLIER
Nose is bent 60° for maximum visibility. Used in
confined areas for bending and forming fine wire.
Inside jaws and jaw edges are polished to prevent
nicking the wire. Plier has a spring loaded ergonomic
design. Length 5 1/2" with a dark blue plastic
handle.
JONARD
P/N DESCRIPTION
JJIICC--33002266Curved Long Nose Plier
JONARD
P/N DESCRIPTION
JJIICC--33338855Curved Needle Nose Plier
31
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
JONARD
P/N DESCRIPTION
JIC-125 Fiber Optic Stripper
JJIICC--112255
JJIICC--337755
CATV & FIBER OPTIC TOOLS
JONARD
P/N DESCRIPTION
JIC-175 Fiber Optic Stripper Ergonomic
JONARD
P/N DESCRIPTION
JIC-375 Fiber Optic Stripper- 3 Hole
FIBER OPTIC STRIPPER
For stripping 250 micron buffer coating from
125 micron optical fiber. Preset at the factory so
no adjustments are necessary. Yellow plastic
dipped handles 5 3/16” long
ERGONOMIC FIBER OPTIC STRIPPER
Used for stripping the 250 micron coating from
the 125 micron optical fiber.
Preset at the factory so no adjustments are
necessary.
Yellow plastic formed handles, tool is 6” long.
FIBER OPTIC STRIPPER THREE HOLE
Three hole Fiber Optic Stripper
performs all common fiber stripping
functions.
Strips the 1.6-3 mm fiber jacket down
to the 900 micron buffer coating. The
second hole strips the 600-900 micron
buffer coating down to the 250
micron coating and the third hole is
used to strip the 250 micron cable
down to the 125 micron glass fiber.
JIC-375 is 6” long.
JJIICC--117755
32
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
CATV & FIBER OPTIC TOOLS
JONARD
P/N DESCRIPTION
TK-375 3 Piece Fiber Optic Kit
H-35 Plastic Molded Pouch
JIC-375 Fiber Optic Stripper- 3 Hole
ES-1964 Electrician Scissor
THREE PIECE FIBER OPTIC KIT TK-375
Kit includes the JIC-375 Fiber Optic Stripper three
hole, ES-1964 Electrician's Scissor, and convenient
molded plastic pouch made of durable PVC material
and will accommodate belts up to 2” in width.
HH--3355JJIICC--337755EESS--11996644
TTKK--337755
JONARD
P/N DESCRIPTION
TK-400 3 Piece Splicer’s Kit
H-40 Leather Pouch
KN-7 Ergonomic Cable Splicing Knife
ES-1964 Electrician Scissor
SPLICER’S KIT TK-400
This compact kit contains an ergonomic splicers knife,
scissor and leather pouch. The knife features a 1 3/4”
tough, cutlery-steel blade and a non-slip handle. The
scissors are made of high carbon steel with scraper
and file on one side and 2 stripping notches on the
other. Both items fit securely in the leather pouch
which can be mounted on belts up to 2” wide.
HH--4400
TTKK--440000
KKNN--77EESS--11996644
33
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
CATV & FIBER OPTIC TOOLS
JONARD
P/N DESCRIPTION
TK-22148 Telephone Installer Splicer Kit
H-35 Plastic Molded Pouch
JIC-22148 Combo Crimper Long Nose Plier
ES-1964 Electrician Scissor
JONARD
P/N DESCRIPTION
TK-50 Five Piece Telecom Installers Kit
H-50 Plastic Molded Pouch
KN-7 Ergonomic Cable splicing Knife
M-216C/EX
Can Wrench
JIC-22035 Probe Pick Spudger
ES-1964 Electrician Scissor
TTKK--2222114488HH--3355JJIICC--2222114488EESS--11996644
TELEPHONE INSTALLER SPLICER KIT TK-22148
Designed for stripping, splicing and crimping.
The perfect kit for telephone installers.
Kit contains the ES-1964 Electrician’s Scissors,
JIC-22148 Combo Crimper Long Nose Plier and
the H-35 Pouch made of durable PVC material
and will accommodate belts up to 2” in width.
Whether it's Fiber Optic, Coax, or Copper this versatile kit
contains the perfect tools for today's demanding
technician. The TK-450 Kit is perfect for the VOIP installer,
Fiber Technician or Communications Specialist and comes
with Jonard's lifetime warranty.
Each Kit contains: Cable Splicers Knife, Electrician’s
Scissors, Diagonal Plier, Crimper/Long Nose Plier, Lineman’s
Plier, Can Wrench, Booth Wrench, Speed Wrench, Probe
Pick, Wire Stripper, Curved Needle Nose Plier, Coax Cable
Cutter, Torque Wrench, Fiber Optic Stripper Three Hole. &
Combination Wrench secured in a convenient easy to carry
Cordura case.
FIVE PIECE TELECOM INSTALLERS KIT
TK-50
The perfect kit for simple
installations–includes the basic
necessities.
Kit includes the M-216C/EX Can Wrench,
KN-7 Ergonomic Cable Splicing Knife,
ES-1964 Electrician’s Scissors and the
H-50 Pouch made of durable PVC
material and will accommodate belts up
to 2” in width.
TTKK--5500
EESS--11996644
JJIICC--2222003355
MM--221166CC//EEXX
KKNN--77
TTKK--445500
HH--5500
CATV/TELECOM INSTALLERS KIT - TK-450
Assembled in a convenient, easy to carry Cordura case,
this kit contains the basic service tools essential for
equipment installation, repairs and cable preparations.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
TK-450 CATV/Telecom Installers Kit
EESS--11996644
JJIICC--118866
CATV & FIBER OPTIC TOOLS
JONARD
P/N DESCRIPTION
JIC-186 Wire & Kevlar Cutting Shears
ERGONOMIC FIBER OPTIC KEVLAR®
CUTTER
High carbon stainless steel blades designed to
cut Kevlar®, cabling insulation, tape, cable
ties and other material.
Ergonomic handles for user comfort and
durability. Adjustable joint screw under
protective cap, serrated blades grip material,
sharp and durable 6” long.
JONARD
P/N DESCRIPTION
ES-1964 Electrician Scissors
ELECTRICIAN SCISSORS
The Electrician Scissors are designed for heavy
duty use.
Made of high carbon steel with a special
hardening process for greater durability and
nickel plated for that professional look.
Notched to strip 19 and 23 AWG wire and
one blade is serrated. A scraper and file are
on the back of the blade.
UNIVERSAL CRIMPER
This fully ratcheted crimper offers exceptional
performance. Designed for minimal closing force (higher
crimp force produced with lower hand force), plus there
is no break-over hand force making the last click easily
achievable. The head is angled to lessen the need to
bend the wrist awkwardly, die changes are made quickly
and easily, ergonomic handles are dual component with
a soft rubber insert plus the tool includes a built in
safety release mechanism. Very durable steel housing
accommodates both Fiber Optic and Coax dies.
UUCC--88000000
UUCCDD--22668855UUCCDD--22004455
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
UC-8000 Universal Crimper
UC-8012 Universal Crimper with COAX Die
UC-8039 Universal Crimper with Fiber Optic Die
UCD-2045 Coax Crimping Die
UUCD-2685 Fiber Optic Crimping Die
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
KN-7 Cable Splicing Knife
34
CABLE SPLICING KNIFE
The tough cutlery steel blade is extremely sharp
and cuts easily through many types of
insulation. It hold its edge with repeated use
and features a non-slip easy grip handle for
better control and reduced hand fatigue. Blade
length is 1 3/4” and overall length is 6 1/4”
KKNN--77
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
JJOONNAARRDD
PP//NNSSPPEECCIIFFIICCAATTIIOONNSSCCAABBLLEESSIIZZEE
UCD-2685 Fiber .151”/.178”/.134”/.139”/.190” Fiber Optic ST, SC, LC
Optic 3.84mm/4.52mm/3.40mm/3.53mm Connectors
4.83mm
UCD-2045 COAX .068”/.262”/.324”/.360” CATV “F” Connectors
1.73mm/6.65mm/8.23mm/9.14mm RG59/RG6
F4
F4
.178 .139
.100
.100
.100
.100
.151 .134 .190
INDUSTRIES CORP.
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
CATV & FIBER OPTIC TOOLS
JJIICC--11002222
JONARD
P/N DESCRIPTION
JIC-4366 Optical Fiber Sheath Stripper
& Ring Tool
RRBB--22006600//66Pkg. of 6 Replacement Blades for
ring feature of tool
RRBB--22887788//66Pkg. 6 replacement blades for
stripper feature of tool
JONARD
P/N DESCRIPTION
JIC-1022 Fiber Jacket Stripper
FIBER JACKET STRIPPER
The Wire Stripper and Cutter is designed to strip and
cut the most commonly used stranded and solid wire
gauges 10 to 22 AWG and 1.6-3 mm fiber jackets.
OPTICAL FIBER CABLE SHEATH STRIPPER &
RING TOOL
Used for stripping and butting tight buffer optical
fiber cables. Use one blade to butt PVC sheathing
and use the second blade to strip the sheathing.
Adjustable for .018” or .031” thick plastic, rubber
or fabric insulation. Also known as CT2860.
RRBB--22887788
RRBB--22006600
35
JJIICC--44336666
THERMAL FIBER OPTIC STRIPPER FIXED BLADE
Thermo-mechanically remove coatings from
optical fibers. High strength thermal stripper
supports standard 125µm optical fibers, including
250 µm, 400 µm, and 900 µm coated fibers. The
heater is adjustable to 200°C and facilitates
stripping difficult and baked-on coatings.
Adjustable temperature and time settings to
adapt to a variety of different coatings. Compact
design, weighs less than a pound. Includes A/C
power supply, cord and cleaning brush. Platforms
supplied separately.
THERMAL FIBER OPTIC STRIPPER ADJUSTABLE
BLADE
Thermo-mechanically remove coatings from
optical fibers. High strength thermal stripper with
adjustable stripping blade, which supports
cladding diameters 40µm to 600 µm acrylate
coated fibers with buffer diameters up to 1200
µm. The heater is adjustable to 200°C and
facilitates stripping difficult and baked-on
coatings. Adjustable temperature and time
settings to adapt to a variety of different
coatings. Compact design, weighs less than a
pound. Includes A/C power supply, cord and
cleaning brush. Platforms supplied separately.
For Fitel, Fujikura and Ericsson fiber holders use the
corresponding platforms, for LDF and all others without
fiber holders use the Jonard Universal Clamp.
JONARD
P/N DESCRIPTION
TSFB-125 Thermal Stripper Fixed Blade
TSAB-40 Thermal Stripper Adjustable Blade
JONARD
P/N DESCRIPTION
TSPE-125 Ericsson Style Platform
TSPF-125 Fitel/Fujikura Style Platform
TSUC-40 Universal Clamp
TTSSAABB--4400
TTSSPPEE--112255TTSSPPFF--112255TTSSUUCC--4400
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
36
CATV TOOLS
HOLLOW SHAFT NUT
DRIVERS
These are full length hollow
shaft nut drivers intended
for working with long bolts.
They are designed with
cushion gripped ergonomic
color coded handles.
Handles provide greater
torque and user comfort.
Overall length 7”
COAXIAL CABLE STRIPPER
The CCS-1 strips coaxial cables for video installations. The black
cartridge is used to strip RG59, RG6 & RG Quad coaxial cables. The
gray cartridge strips RG7 & RG11 coaxial cables. The stop provides a
pre-measured device for stripping the exact length you need, and
the stripper has a convenient holder for the second cartridge giving
you maximum flexibility. Both cartridges perform a 2-level strip for
“F” Connector termination.
JONARD
P/N DESCRIPTION
ND-631 Nut Driver Set – 7 Piece 3/16”, 1/4”,
` 5/16”, 11/32”, 3/8”, 7/16” & 1/2”
ND-630316 Nut Driver 3/16” (Black)
ND-63014 Nut Driver 1/4” (Red)
ND-630516 Nut Driver 5/16” (Yellow)
ND-6301132 Nut Driver 11/32” (Green)
ND-63038 Nut Driver 3/8” (Blue)
ND-630716 Nut Driver 7/16” (Brown)
ND-63012 Nut Driver 1/2” (Red)
NNDD--663311
RRFF--1122
F CONNECTOR TOOL
Designed to provide easy access to connectors
in high-density locations. The head measures
7/16” and is used specifically for “F”
connectors. The socket extends 8” from the
handle, the overall length is 12” and the back
of the handle has an insertion device to aid in
making connections.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
RF-12 F Connector Tool
BNC CONNECTOR TOOL
Designed to provide easy access to connectors in
high density locations. The head is formed
specifically for BNC connectors. The socket
extends 8” from the handle and the overall
length is 12”.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
RBNC-12 BNC Connector tool
RRBBNNCC--1122
CCCCSS--11
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
CCS-1 Coaxial Cable Stripper
37
CATV WRENCHES
TORQUE WRENCH
Designed for “F” Connectors, these wrenches help prevent
over tightening. An audible click tells you the connection
has been properly achieved. These wrenches all have angle
heads, sized for 7/16” F connectors and are designed with
an ergonomic cushioned handle for user comfort and
protection. The last two digits of the part number indicate
the inch pounds of torque (either 20 or 30 inch pounds)
and the first four letters indicate whether the head is a
speed head or a full head (TWAF is full and TWAS is speed).
Note that these wrenches work in tightening mode only.
Torque wrenches are 6 1/2” long.
JONARD
P/N DESCRIPTION
TWAF-71620 Torque Wrench Full Head 20 Inch Pounds
TWAS-71620 Torque Wrench Speed Head 20 Inch Pounds
TWAF-71630 Torque Wrench Full Head 30 Inch Pounds
TWAS-71630 Torque Wrench Speed Head 30 Inch Pounds
AASSWW--771166
COMBINATION WRENCH
Wrench measures 7/16” at both the open end and box
end. Both ends have an angle offset (15°) to ease access
in confined areas. The box end offers 12 points of
contact. High gloss chrome finish and made of chrome
vanadium steel. Tool is 6 5/8” long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
CW-716 Combination Wrench
SPEED WRENCH DOUBLE ENDED
ASW-716 measures 7/16" at both ends. ASW-12
measures 1/2” at both ends and ASW-916 measures
9/16” at both ends. Speed head makes tightening and
loosening quick and easy, plus head is angled (15°) to
ease access. Speed wrenches are 6 1/2” long.
High gloss chrome finish, and made of high carbon alloy
steel.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
ASW-12 Speed Wrench double Ended 1/2”
ASW-716 Speed Wrench double Ended 7/16”
ASW-916 Speed Wrench double Ended 9/16”
CCWW--771166
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
TTWWAAFF--7711662200
TTWWAASS--7711662200
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
38
CAN, BOOTH, LINESMAN WRENCHES
C
CA
AN
N S
SO
OC
CK
KE
ET
T W
WR
RE
EN
NC
CH
H
Double end can socket wrench, 3/8" and 7/16"
hex, orange plastic handle in either our
standard or ergonomic design. Used in placing
fuses in cable terminals and connecting wires to
fuses and binding posts.
The walls on both sockets are thin enough so
they can be used to work locking
devices on most terminals and cabinets. 7" long.
MM--221166CC//RRXX
MM--221166CCSS2222
MM--221166CC//EEXX
MM--221166CC//RREEXX
L
LI
IN
NE
EM
MA
AN
N’
’S
S B
B W
WR
RE
EN
NC
CH
H
Forged and heat treated, this wrench is used
on pole line hardware. It is open-end double-
end type with two sizes of openings at each
end and an oval hole for turning pole steps.
The end openings accommodate nuts for
3/8”, 1/2”, 5/8” and 3/4” bolts and the head
of the 1/2” drive screw. The faces of the
wrench openings are offset to provide handle
clearance. 13” Long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--665500Lineman’s B Wrench
JJIICC--665500
B
BO
OO
OT
TH
H W
WR
RE
EN
NC
CH
H
Tamperproof hex screwdriver, also known as
a booth wrench or security wrench.
It features a 1" diameter screwdriver handle,
5/32" hex shaft with a hole drilled in the tip
for use with security tamperproof screws
used for telephone and CATV applications.
BW-532 Booth Wrench is 9" long and the
BW-532-3 Booth Wrench is 6" long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
BW-532 Booth Wrench -Ergonomic design 9”
BW-532-3 Booth Wrench -Ergonomic design 6”
BBWW--553322
BBWW--553322--33
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
M-216C/EX Ergonomic 1” Dia. Handle,
Hex Outer Socket
M-216C/REX Ergonomic 1” Dia. Handle,
Round Outer Socket
M-216C/RX Standard Handle,
Round Outer Socket
M-216CS22 Ergonomic 1” Dia. Handle, Hex Outer
Socket with 22 AWG Stripper Blade
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
39
INSULATED TOOLS
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
IINNSS--118800#1 X 3 Phillips Screwdriver
IINNSS--22110000#2 X 4 Phillips Screwdriver
IINNSS--33115500#3 X 6 Phillips Screwdriver
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
IINNSS--4477553/32 X 3 Slotted Screwdriver
IINNSS--441100001/8 X 4 Slotted Screwdriver
IINNSS--661155001/4 X 6 Slotted Screwdriver
IINNSS--881177555/16 X 7 Slotted Screwdriver
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
IINNPP--22008822Long Nose Plier 8 1/4” Long
IINNPP--22006655Long Nose Plier 6 1/2” Long
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
IINNPP--11008800Lineman’s Combo Plier 8” Long
IINNPP--11007722Lineman’s Combo Plier 7 1/4” Long
IINNPP--11006655Lineman’s Combo Plier 6 1/2” Long
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
IINNPP--33006622Diagonal Plier 6 1/4” Long
IINNPP--33007722Diagonal Plier 7 1/4” Long
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
IINNPP--44006655Wire Stripper 6 1/2” Long
Jonard Insulated Tools are manufactured to IEC 60900 Standards for
hazardous work environments. Our tools are tested to 10,000 VAC and
rated for 1,000 VAC live use.
I
IN
NS
SU
UL
LA
AT
TE
ED
D S
SC
CR
RE
EW
WD
DR
RI
IV
VE
ER
RS
S-
-
P
PH
HI
IL
LL
LI
IP
PS
S H
HE
EA
AD
D
I
IN
NS
SU
UL
LA
AT
TE
ED
D S
SC
CR
RE
EW
WD
DR
RI
IV
VE
ER
RS
S-
-
S
SL
LO
OT
TT
TE
ED
D H
HE
EA
AD
D
I
IN
NS
SU
UL
LA
AT
TE
ED
D W
WI
IR
RE
E S
ST
TR
RI
IP
PP
PE
ER
R
I
IN
NS
SU
UL
LA
AT
TE
ED
D P
PL
LI
IE
ER
RS
S
Care and Use Guide for Insulated Tool
Tools are not recommended for use on energized circuits. Work should only be performed by qualified professionals. Do not use this tool if the
insulation becomes damaged in any way. Tools must be kept clean and dry. Always inspect before use.
Do not touch the uninsulated portion of the tool or any conductive object when either might make contact with an energized source. Always
wear approved eye & clothing protection. Only use tools for their designed purpose and always follow OSHA 1910.333 (c)(2) and NFPA 70E 2004
when doing electrical work. Failure to observe proper safety precautions may result in serious injury or death.
1000V
IEC 60900
TTKK--111100IINNSSTTKK--7700IINNSS
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
TTKK--7700IINNSS7 Piece Insulated Screwdriver Set
Screwdriver Set contains:
3 Philips, 4 Slotted as shown below
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
TTKK--111100IINNSS11 Piece Insulated Tool Kit
Kit contains: 7 Screwdrivers as
shown plus INP-1072, INP-2065,
INP-3062 & INP- 4065
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
40
TELECOMMUNICATION TOOLS
24 INCH LONG #3 PHILLIPS HEAD SCREWDRIVER
This 24" long #3 Phillips Head Screwdriver is designed
for use when you need an extra long screwdriver to
reach the diodes in back of the various rectifiers. Made
of chrome vanadium steel with a matte finish and a
custom ergonomic tri-color handle.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
SD-243 #3 Philips Head Screwdriver 24” long
SSBB--22222244
SSBB--22442266
SSBB--22883300
W
WI
IR
RE
E S
ST
TR
RI
IP
PP
PE
ER
R &
& C
CU
UT
TT
TE
ER
R
The latest development in wire stripping & cutting.
Simply place the wire in the stripping slot. Squeeze
and pull. The wire is stripped and cut to the exact
length required. Comes with cushioned ergonomic
grips, interchangeable blades 22-24 AWG and 24-
26 AWG. Supplied assembled.
JJIICC--44447733
SSDD--224433
L
LA
AM
MP
P E
EX
XT
TR
RA
AC
CT
TO
OR
R
Mechanical type extractor used to
remove or insert miniature lamps
with bayonnet type bases in panels
and switchboards by firmly and
gently grasping lamps. Grasp lever
includes a return spring for fast lamp
insertion and removal. Lamp grasp
is limited to 5/16" to prevent shorts.
Handle diameter 1/2”. 4” long.
W
WI
IR
RE
E E
EX
XT
TR
RA
AC
CT
TO
OR
R
Metal tool with insulated handle to
remove wire from quick-connect
clips and 66 & 110 terminal blocks.
3/16" diameter with a .052" slot
width. 5 1/2" long.
SS--333399
MM--772244AA
T
T K
KE
EY
Y T
TO
OO
OL
L
Pay telephone Tool
The key is used to release the housing and door locking
mechanism of the no. 1A type coin telephone sets 2 1/2” long.
C
CO
OI
IN
N L
LE
EV
VE
EL
LI
IN
NG
G T
TO
OO
OL
L
Pay telephone Tool
Tool used for leveling coins in
coin collectors when the coin
receptacle becomes so full as to
interfere with operation of the
collector. May also be used to
measure the degree of fullness
by means of a calibrated scale
and metal slider. 7" long.
JJIICC--771199AA
JJIICC--113399BB
SCREWDRIVER, JEWELER'S TYPE
Used to terminate the battery back up
in the fiber ONT. Screwdriver has
concaved swivel knob to fit the finger
and hexagonal shape to prevent
rolling. Solid blade made of high
quality hardened tool steel. .100"
blade width. 4” long.
SSDD--6633
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
SD-63 Jeweler’s Screwdriver
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
SS--333399Lamp Extractor
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--113399BBCoin Leveling Tool
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
MM--772244AAWire Extractor
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--771199AAT Key Tool
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--44447733Wire Stripper & Cutter
SSBB--22222244Replacement Blade 22-24 AWG
SSBB--22442266Replacement Blade 24-26 AWG
SSBB--22442266Replacement Blade 24-26 AWG
SSBB--22883300Replacement Blade 28-30 AWG
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
41
C
CA
AB
BL
LE
E R
RI
IN
NG
G T
TO
OO
OL
L
This cable ring tool is designed for cutting the sheathing of inside type
plastic, fabric or rubber covered cable 3/16”, 1/4”, 3/8”, & 1/2”. Durable
metal handle. Tool is supplied with 1 replacement blade. 5 1/2” long.OO
JJIICC--22006600RRBB--22006600
TELECOMMUNICATION TOOLS
C
CA
AB
BL
LE
E S
SE
EW
WI
IN
NG
G N
NE
EE
ED
DL
LE
E-
-M
ME
ET
TA
AL
L
Durable red anodized aluminum handle with curved
notched sewing needle. Designed to harness or lace
multiple lead bundles. 5 3/4” long. Replacement
needles are also available.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--228877Cable Sewing Needle
RRBB--228877//66Pkg. of 6 Replacement Needles
JJIICC--228877
W
WI
IR
RE
E L
LO
OO
OP
P P
PU
UL
LL
LE
ER
R-
-M
ME
ET
TA
AL
L
Durable red anodized aluminum handle facilitates
pulling wire through terminal blocks, rings on main
frame or fanning strip holes. JIC-2257M overall length
is 8 1/2” and JIC-2257M-12 overall length is 15”
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--22225577MMWire Loop Puller Overall Length 8 1/2”
JJIICC--22225577MM--112212” Wire Loop Puller Overall Length 15”
RRBB--22225577//66Pkg. of 6 Replacement Loops for
JIC-2257M only
JJIICC--22225577MM
C
CA
AB
BL
LE
E S
SE
EW
WI
IN
NG
G N
NE
EE
ED
DL
LE
E-
-I
IN
NS
SU
UL
LA
AT
TE
ED
D
Xylan insulated cable sewing needle has a yellow lightweight
molded grip handle that will harness or lace multiple lead
bundles. 5 1/2” long.
JJIICC--33220099
W
WI
IR
RE
E L
LO
OO
OP
P P
PU
UL
LL
LE
ER
R-
- I
IN
NS
SU
UL
LA
AT
TE
ED
D
Xylan insulated wire loop puller facilitates pulling wire
through terminal blocks, rings on main frame, or fanning strip
holes. The yellow plastic lightweight handle fits snugly and is
easy to hold in your hand. 8” long.
JJIICC--22225577
S
ST
TR
RA
AI
IG
GH
HT
T M
ME
ET
TA
AL
L N
NE
EE
ED
DL
LE
E
This”Chicago type” straight metal needle is designed for
cable sewing. This tool, made of the finest steel is for anyone
in the cable industry. Needle is .016” thick and 12” long.
RRBB--22225577
RRBB--228877
JJIICC--228844
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--22006600Cable Ring Tool
RRBB--22006600//66Pkg. of 6 Replacement Blades
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--22225577Wire Loop Puller
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--33220099Cable Sewing Needle
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--228844Straight Metal Needle
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
42
The solderless connection by wire wrapping technique is now a standard method of making
connections to terminals in high density electronic equipment. A wire wrapped connection
is made by coiling the wire around the sharp corners of a terminal under mechanical tension.
A distinct advantage of wire wrapping is the ease with which a wire may be removed from
a terminal to correct errors or modify wiring. An unwrap tool is slipped over the terminal,
engaging the first turn of the connection. Rotating the tool, the connection is removed in
seconds, without damage to the terminal.
WIRE WRAPPING TOOLS
PPoossiittiioonn WWrraapp
RReegguullaarr WWrraapp
TTwwiisstt WWrraapp
M
MA
AN
NU
UA
AL
L W
WI
IR
RE
E W
WR
RA
AP
PP
PI
IN
NG
G G
GU
UN
NS
S
E
ER
RG
GO
ON
NO
OM
MI
IC
CA
AL
LL
LY
Y I
IM
MP
PR
RO
OV
VE
ED
D
Hand operated wrapping guns use
interchangeable bits and sleeves. Tools can
provide up to 10 revolutions per squeeze of
the trigger, and accomodate wire sizes from
22-32 AWG. All three guns are used for
production line and field service use in the
electronics and telecommunications industries.
The plastic gun (WG-350L) offers the
advantage of light weight.
The metal gun (WG-350) provides greater
durability.
The insulated metal gun (WG-350INS) has the
added features of 1000 volt dielectric
strength protection.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
WWGG--335500LLWire Wrapping Gun, Plastic
WWGG--335500Wire Wrapping Gun, Metal
WWGG--335500IINNSSWire Wrapping Gun, Insulated Metal
See page 43 for complete listing of bits and
sleeves.
W
WG
G-
-3
35
50
0I
IN
NS
S
I
In
ns
su
ul
la
at
te
ed
d
W
WG
G-
-3
35
50
0
A
Al
lu
um
mi
in
nu
um
m
W
WG
G-
-3
35
50
0L
L
L
Le
ex
xa
an
n®
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
43
WIRE WRAPPING TOOLS
WIRE WRAPPING BITS AND SLEEVES STANDARD 3” LONG
Bits conform to terminal height, width and wire size combinations.
Sleeves are insulated to prevent shorting of adjacent connections.
WIRE WRAPPING 3” LONG BITS & SLEEVES
JJOONNAARRDD
BBIITT PP//NNSSLLEEEEVVEE PP//NNWWIIRREE GGAAUUGGEEHHOOLLEE DDIIAA..HHOOLLEE DDEEPPTTHH
BW-2224 SW-2224 22-24 .075 .807
BW-2600 SW-2426 26 .075 1.000
BW
-
3032 SW-3032
30-32 .040 .750
BBWW--22222244
BBWW--22222244
SSWW--22222244
SSWW--22222244WWGG--335500IINNSS
These 5” bits and sleeves are designed for wire wrapping in
tight and confined areas requiring deep penetration. Their
5” length ensures proper connections in hard to reach
locations.
SSWW--2222224455
T
TK
K-
-W
WW
W5
5 5
5-
-P
PI
IE
EC
CE
E W
WI
IR
RE
E W
WR
RA
AP
PP
PI
IN
NG
G T
TO
OO
OL
L K
KI
IT
T
This is a complete field service telecom installation kit and is
also used by technicians working at a main distributing frame.
TTKK--WWWW55
((ccoommpplleettee kkiitt))
BBWW--2244000055
W
WI
IR
RE
E W
WR
RA
AP
PP
PI
IN
NG
G K
KI
IT
T
J
J
O
O
N
N
A
A
R
R
D
D
P
P
/
/
N
N
D
D
E
E
S
S
C
C
R
R
I
I
P
P
T
T
I
I
O
O
N
N
TK-WW5 Wire Wrapping Kit
TKC-WW5 Leather Holster for TK-WW5
WIRE WRAPPING BITS AND SLEEVES 5” LONG
WIRE WRAPPING 5” LONG BITS & SLEVES
JJOONNAARRDD
BBIITT PP//NNSSLLEEEEVVEEPP//NNWWIIRREE GGAAUUGGEEHHOOLLEE DDIIAA..HHOOLLEE DDEEPPTTHH
BBWW--2222000055SSWW--222222445522 .075 .750
BBWW--2244000055SSWW--224422665524 .075 .750
BBWW--2266000055SSWW--224422665526 .075 .750
JJIICC--44447733
WWDDUUDD--22222244
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
44
WWRRAAPPPPIINNGGWWRRAAPPPPIINNGGUUNNWWRRAAPPPPIINNGGUUNNWWRRAAPPPPIINNGG
JJOONNAARRDDWWIIRREETTEERRMMIINNAALLTTEERRMMIINNAALLTTEERRMMIINNAALLHHOOLLEE
PP//NNGGAAUUGGEEHHOOLLEE DDIIAA..HHOOLLEE DDEEPPTTHHHHOOLLEE DDIIAA..DDEEPPTTHH
WDUD-2000 20 .075” 1.000” .070” 1”
WDUD-2224 22-24 .075” .807” .070” 1”
WDUD-2600 26 .040” .750” .038” 1”
WDUD-3000 30 .036” .750” .038” 1”
HAND WRAP & UNWRAP TOOLS
These wire wrapping tools do the job of
two. These two sided tools allow for
quick change of wrapping to unwrapping
and back, while the unused side serves as
a handle. 6" long.
TTooooll SShhoowwnn
DDiissaasssseemmbblleedd
WWDDUUDD--22000000
WWDDUUDD--22222244
WWDDUUDD--22660000
WWDDUUDD--33000000
DSL INSULATED WRAP & UNWRAP TOOL
Specifically designed for DSL (Digital Subscriber Line) connections. The wrapping side is designed for 24-26
AWG wire, and the unwrap side is designed for 20-26 AWG wire. Comes with an insulated handle for
dielectric protection.
WWRRAAPPPPIINNGGWWRRAAPPPPIINNGGUUNNWWRRAAPPPPIINNGGUUNNWWRRAAPPPPIINNGG
JJOONNAARRDDWWIIRREETTEERRMMIINNAALLTTEERRMMIINNAALLTTEERRMMIINNAALLHHOOLLEE
PP//NNGGAAUUGGEEHHOOLLEE DDIIAA..HHOOLLEE DDEEPPTTHHHHOOLLEE DDIIAA..DDEEPPTTHH
WDUD-26DS 24-26 .075” .750” .070” 1”
HAND WRAPPING TOOLS
These tools with a metal handle are for left
and right hand use and are compact and
versatile. 6” long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
WD-2224 Hand Wrapping tool for 22-24 gauge wire
with a .075” diameter hole
WWDD--22222244
WIRE WRAPPING TOOLS
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
45
H
HA
AN
ND
D W
WR
RA
AP
PP
PI
IN
NG
G T
TO
OO
OL
LS
S
Wire wrapping tool has a handle and shell,
covered with a sleeve of insulating material.
With a .073” diameter x .750” deep hole to
accommodate a terminal. 5” long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
WWDDII--22442266Hand Wrapping Tool 24-26 gauge
H
HA
AN
ND
D W
WR
RA
AP
P T
TO
OO
OL
L
This manual wire wrapping tool allows you to
make uniform, gas-tight solderless wrapped
connections with 22 and 24 gauge wire. Red
handle. 5” long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--2222668811Hand Wrap Tool
WWDDII--22442266
JJIICC--2222668811
H
HA
AN
ND
D U
UN
NW
WR
RA
AP
PP
PI
IN
NG
G T
TO
OO
OL
L
This manual wire unwrapping tool consists of
a threaded steel bit and blue plastic handle.
A terminal hole is provided to accommodate
terminals with cross-section dimensions up to
.032 x .062 inches. 5" long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JJIICC--2200555511Manual Wire Unwrapping Tool
S
SL
LE
EE
EV
VE
ED
D U
UN
NW
WR
RA
AP
PP
PI
IN
NG
G T
TO
OO
OL
L
This versatile unwrapping tool with a funnel-
shaped spring loaded sleeve. This is a single
ended insulated tool with a yellow plastic
handle used for 20-26 gauge wire. 5 1/2"
long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
UUDD--22222244Sleeved unwrapping tool
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
UUDDLLRR--22002266Hand unwrapping tool for 20-26 wire
with a .070” diameter hole
UUDDLLRR--22443322Hand unwrapping tool for 24-32 wire
with a .040” diameter hole
H
HA
AN
ND
D U
UN
NW
WR
RA
AP
PP
PI
IN
NG
G T
TO
OO
OL
LS
S
These double ended tools with a metal
handle are for left and right hand use. 6"
long.
JJIICC--2200555511
UUDD--22222244
UUDDLLRR--22002266UUDDLLRR--22443322
WIRE WRAP/UNWRAP TOOLS
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
46
JJOONNAARRDDMMIILLIITTAARRYYCCOOLLOORRCCOONNTTAACCTTIINNCCHHEESS
PP//NNSSTTAANNDDAARRDD ((MMSS))CCOODDEESSIIZZEE
RR--44660011MMSS2244225566--RR2200RED 20 0.040”
RR--44660022MMSS2244225566--RR1166BLUE 16 0.063”
RR--99446611MMSS2244225566--RR1122YELLOW 12 0.093”
KKRR--226600 RReemmoovvaall TTooooll KKiitt ((ccoonnttaaiinnss aabboovvee 33 ttoooollss)) iinn lleeaatthheerr ccaassee
JJOONNAARRDDMMIILLIITTAARRYYCCOOLLOORRCCOONNTTAACCTTIINNCCHHEESS
PP//NNSSTTAANNDDAARRDD ((MMSS))CCOODDEESSIIZZEE
AA--44559988MMSS2244225566--AA2200RED 20 0.040”
AA--44559999MMSS2244225566--AA1166BLUE 16 0.063”
AA--44660000MMSS2244225566--AA1122YELLOW 12 0.093”
KKAA--226600 IInnsseerrttiioonn TTooooll KKiitt ((ccoonnttaaiinnss aabboovvee 33 ttoooollss)) iinn lleeaatthheerr ccaassee
AA--44559988
AA--44559999
AA--44660000
RR--99446611
RR--44660011
RR--44660022
KKRR--226600
KKAA--226600
C
CO
ON
NN
NE
EC
CT
TO
OR
R I
IN
NS
SE
ER
RT
TI
IO
ON
N A
AN
ND
D
E
EX
XT
TR
RA
AC
CT
TI
IO
ON
N T
TO
OO
OL
LS
S
These tools service virtually all
connectors conforming to Mil-C-26482,
Mil-C-26500 with front release contacts
made by such manufacturers as Amp,
Amphenol, Bendix, Burndy, Cannon,
Cinch, Continental, Elco, Flight, Pyle
National and Deutsch. These tools
contain strong, durable, stainless steel
probes & color coded handles.
P
PI
IN
N E
EX
XT
TR
RA
AC
CT
TO
OR
R
A plunger style pin extractor for pushing pins
out from behind the connector blocks for
contact sizes 16-20. 3” long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
RR--55992266Pin Extractor
RR--55992266
CONNECTOR TOOLS
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
47
M
M-
-1
12
26
6Push Hook for difficult to
reach areas, 11" long.
M
M-
-1
13
30
0/
/I
IX
XPull Hook and lifter.
With an insulated grip. 8" long.
M
M-
-1
13
30
0/
/S
SX
XPull Hook and lifter.
With a knurled grip. 8" long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
MM--112266
Push Hook
M
M-
-1
13
30
0/
/S
SX
XPull Hook
Used for inserting, removing and adjusting fine springs and other small parts in tight areas. Indispensable
for precision work in production and maintenance of precision production, electronics, electromechanics
and even maintenance jobs. All spring hooks are tapered to a fine point. Produced of the finest quality
high carbon steel with a nickel-plated finish. We will custom design Spring Hooks to meet your specific
requirements.
M
M-
-1
12
20
0Pull Hook with looped handle
for maximum control 6" long.
M
M-
-1
12
21
1Pull Hook for difficult to
reach areas, 11" long.
M
M-
-1
12
25
5Push Hook with looped
handle for maximum control 6"
long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
MM--112200
Pull Hook
MM--112211
Push Hook
M
M-
-1
12
25
5Push Hook
M
M-
-1
13
37
7Push & Pull 2 sided Hook, 7" long.
M
M-
-1
14
45
5Captive Spring Hook. Spring
loaded hook is exposed by depressing
plunger on top of tool. Internal spring
retracts hook automatically. This hook is
ideal for capturing small wires, springs
or parts and holding them. 7" long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
MM--113377
Push & Pull Hook
M
M-
-1
14
45
5Captive Spring Hook
MM--112200
MM--112266
MM--112211
MM--113377
MM--114455
MM--112255
MM--113300//SSXX
ALIGNMENT TOOLS
SPRING HOOKS/CLIP SETTER
C
CL
LI
IP
P S
SE
ET
TT
TE
ER
R
Clip Setter used for setting and withdrawing E
and C clips with a inside diameter of .156” min.
and thickness of .025” min. Max inside diameter
of 3” and thickness of .093” One end of this tool
has a hook with leaf spring tension for removing
the clip. Other end of tool has leaf spring for
holding clip in position to insert. Narrow shape
allows access to confined places. This tool is
6 3/4" long .275" wide and 1/16" thick.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
CCSS--11002222Clip Setter
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
48
ALIGNMENT TOOLS
T
TR
RI
IM
MP
PO
OT
T
Double ended Trimpot with a hex
(allen) steel .050" and 3/32" long
steel screwdriver tip. Ideal for
aligning, adjusting, calibrating and
fine tuning of electronic circuitry,
potentiometers, oscilloscopes and
electronic equipment. Made of a
high impact non-conductive
thermoplastic material. 5" long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
AATT--33776677Trimpot
JJOONNAARRDD
P
P/
/N
N
D
DE
ES
SC
CR
RI
IP
PT
TI
IO
ON
N
S
S-
-3
38
89
9/
/1
10
0
Orange Sticks Point & Flat end
Pk. of 10
S
S-
-3
38
89
9/
/1
10
00
0
Orange Sticks Point & Flat end
Pk. of 100
S
S-
-3
38
89
9M
M/
/1
10
0
Orange Sticks
2 Flat ends Pk. of 10
S
S-
-3
38
89
9M
M/
/1
10
00
0
Orange Sticks
2 Flat ends Pk. of 100
A
AL
LI
IG
GN
NM
ME
EN
NT
T T
TO
OO
OL
L K
KI
IT
T
This 5 piece pocket kit contains
a selection of the most popular
non-conductive tools for
aligning and adjusting
components.
AT-3767 Trimpot, AT-6241
Alignment Tool, AT-3112 Spudger,
S-389 Orange Stick, JIC-22035
Probe Pick
JJOONNAARRDD
P
P/
/N
N
D
DE
ES
SC
CR
RI
IP
PT
TI
IO
ON
N
T
TK
K-
-A
AT
T5
5
Alignment Tool Kit
A
AL
LI
IG
GN
NM
ME
EN
NT
T T
TO
OO
OL
L
2-in1 nonconductive Alignment
Tool 1/4" in diameter, stepped
down to 5/32" in diameter. Ideal
for most variable capacitors, coils
and resistors. Also used to
harness and separate fine wire
terminals in computers,
telephones and cables. Made of
non-conductive thermoplastic
material. 7" long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
AATT--66224411Alignment Tool
S
SP
PU
UD
DG
GE
ER
R
Plastic pencil type tool tapered to
a point on one end and
screwdriver tip on other end.
Used to form, shape, guide,
spudge and separate fine
computer wire terminals,
telephone wires and cables. Also
used for breaking solder bridges,
probing or positioning loose
components. Made of a high
impact non-conductive
thermoplastic material. 6"
double ended 5/16" diameter
long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
AATT--33111122Spudger
O
OR
RA
AN
NG
GE
E S
ST
TI
IC
CK
KS
S
Static free double ended economical tool
made of birch wood. Used for cleaning
electrical components and separating
contact points, fine wires and other delicate
components. 3/16” diameter x 7” long. The
S-389 has one end tapered to a point and
the other end to a flat screwdriver type tip.
The S-389M has both ends tapered with a
flat screwdriver type tip.
AATT--33111122AATT--66224411AATT--33776677
SS--338899
SS--338899MM
Flat end
Sharp end
AATT--33111122
AATT--66224411
AATT--33776677
JJIICC--2222003355
SS--338899
PROBE PICK
Tough resilient yellow nylon
probe “spudger”. One end is
tapered to a 1/16” diameter point
having an insulated “L” shaped
wire hook extension. The other
end tapers to a flat, 3/16” wide
and 1/16” thick, with 2 small
notches. Used in electrical
contacts. 7” long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
JIC-22035 Insulated Probe Pick
JIC-22035NT Uninsulated Probe Pick
JJIICC--2222003355
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
INDUSTRIES CORP.
49
BURNISHERS
PPBB--33,, PPBB--77 && PPBB--33RR
BB--33RRBB--33
BB--77
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
DD--220000Diamond Burnisher Coarse
DD--330000Diamond Burnisher
Medium
DD--440000Diamond Burnisher
Fine
KK--223344Diamond Burnisher
Assortment Kit
D
D-
-2
20
00
0 C
Co
oa
ar
rs
se
e (
(g
gr
ri
it
t f
fo
or
r r
ra
ap
pi
id
d c
cl
le
ea
an
ni
in
ng
g)
),
,
.019" Thick, two diamond faces, green shaft.
D
D-
-3
30
00
0 M
Me
ed
di
iu
um
m (
(g
gr
ri
it
t f
fo
or
r i
in
nt
te
er
rm
me
ed
di
ia
at
te
e s
si
iz
ze
e
c
co
on
nt
ta
ac
ct
ts
s)
),
,.017" Thick, two diamond faces,
red shaft.
D
D-
-4
40
00
0 F
Fi
in
ne
e (
(g
gr
ri
it
t f
fo
or
r s
sm
ma
al
ll
l s
se
en
ns
si
it
ti
iv
ve
e c
co
on
nt
ta
ac
ct
ts
s)
),
,
.011" Thick, single diamond face, blue shaft.
K
K-
-2
23
34
4,
,Three assorted spatulas in a leather
case.
C
CO
ON
NT
TA
AC
CT
T B
BU
UR
RN
NI
IS
SH
HE
ER
RS
S
Plastic insulated handles for working on live contacts. Tools are
packaged in a clear plastic vial for protection from grease and
moisture.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
OOBB--11//33FFoorr FFiinnee CCoonnttaaccttss..
Black handle 3/16” wide, .007” thick. 3” long, Package of 3
OOBB--11//1122FFoorr FFiinnee CCoonnttaaccttss..
Black handle 3/16” wide, .007” thick. 3” long, Package of 12
OOBB--22//1122FFoorr EExxttrraa SSeennssiittiivvee PPooiinnttss..
Blue handle. 1/4” wide, .007” thick. 3” long, Package of 12
OOBB--33//1122FFoorr GGeenneerraall PPuurrppoossee CCoonnttaaccttss..
Red handle. 1/4” wide, .010” thick. 3” long, Package of 12
OOBB--44//1122FFoorr IInndduussttrriiaall UUssee..
Green handle. 1/4” wide. .020” thick 3” long, Package of 12
KK--223344
P
PO
OC
CK
KE
ET
T T
TY
YP
PE
E B
BU
UR
RN
NI
IS
SH
HE
ER
RS
S
Adjustment of flexible blade-length and rigidity -
is possible by varying depth in chuck. Supplied
with replaceable blades stored in pen barrel at
other end. Plastic barrel and cap made of sturdy
plastic for dielectric work. Length 4 1/2",
diameter 3/8". Blades are 3/16" Wide x 1 1/2"
long. Rods are .020" diameter x 1 1/4" long.
JJOONNAARRDD
PP//NNDDEESSCCRRIIPPTTIIOONN
PPBB--33Pen With 6 Blades .0035” Thick
P
PB
B-
-3
3R
RPB-3 plus 6 abrasive rods .020”
P
PB
B-
-7
7Pen With 6 Blades, .007” thick
B
B-
-3
3/
/2
25
5Pkg. 25 Replacement Blades for PB-3 (.0035”)
B
B-
-3
3R
R/
/2
25
5Pkg. 25 Replacement Rods for PB-3R (.020”)
B
B-
-7
7/
/2
25
5Pkg. 25 Replacement Blades for PB-7 (.007”)
OOBB--44
OOBB--11
OOBB--22
OOBB--33
D
DI
IA
AM
MO
ON
ND
D B
BU
UR
RN
NI
IS
SH
HE
ER
RS
S
These diamond contact
burnishing spatulas consist of
uniform abrasive diamond
particles, set in a special metal
for precise effective cleaning,
polishing and burnishing with
minimum pressure, so very little
metal is removed. Diamond face
1” x 1/4”. Total length 6”.
DD--220000,, DD--330000,, DD--440000
134 Marbledale Road, Tuckahoe, NY 10707 • www.jonard.com
INDUSTRIES CORP.
50
FORCE GAUGES TENSION
PUSH-PULL GAUGES
Measurement is extremely simple. Just place point of gauge arm perpendicular to the force to be measured.
Reading can be taken in both directions - clockwise and counter-clockwise. Gauges offer extreme precision and
durability. The measuring springs are made of hard tempered annealed beryllium copper. All gauges equipped with
maximum reading pointer. Tolerance ± .01 (Reading + Maximum Scale Reading.)
Jonard force gauges are all ergonomically designed and have become the industry standard for measuring force. Our 3
different lines of force gauges are used by a multitude of industries and these gauges are being used in over 1000
different applications for measuring, calibrating, standardizing, testing and evaluating.
P
PU
US
SH
H-
-P
PU
UL
LL
L P
PR
RE
EC
CI
IS
SI
IO
ON
N T
TE
EN
NS
SI
IO
ON
N G
GA
AU
UG
GE
E
Precision, compact tubular-type
mechanical force gauge slender shape
permits its use in confined areas. Gauge is
graduated in two scales: grams and
ounces. Precision springs individually are
calibrated. Full scale accuracy and
permanent calibration is held to ± 1
graduation. Construction is brass with
satin chrome finish. Size: 1/2" diameter x
15" long.
JJOONNAARRDDAAVVOOIIRRDDUUPPOOIISSMMEETTRRIICC
PP//NNCCAAPPAACCIITTYYCCAAPPAACCIITTYY
GGPPPP--888 oz. x 0.25 oz 220 g x 5 g
GGPPPP--336636 oz. x 0.5 oz. 1,020 g x 20 g
GGPPPP--772272 oz. x 1 oz. 2,025 g x 25 g
GGPPPP--115515 lb. x 4 oz. 6,804 x 100 g
JJOONNAARRDDAAVVOOIIRRDDUUPPOOIISSMMEETTRRIICC
PP//NNCCAAPPAACCIITTYYCCAAPPAACCIITTYY
GGPPPP--551 lb X 1 oz. 500 g X 50 g
E
EC
CO
ON
NO
OM
MY
Y P
PU
US
SH
H-
-P
PU
UL
LL
L T
TE
EN
NS
SI
IO
ON
N G
GA
AU
UG
GE
ES
S
These high impact polystyrene cased
instruments accurately measure push pull
forces. Gauge is graduated in two scales:
grams and ounces. Precision springs. Full
scale accuracy is held to ±1 graduation.
Size: 11/2" wide x 1" deep x 14" long.
GGPPPP--55
SSmmaallll GGaauuggeess
(Flat Tip, Dial Diameter 1 1/2")
JJOONNAARRDDRRAANNGGEEGGRRAADDUUAATTIIOONN
PPAARRTT NNOO..IINN GGRRAAMMSSIINN GGRRAAMMSS
GGDD--110-10 .25
GGDD--334-35 1.00
GGDD--555-50 1.00
GGDD--110010-100 2.00
GGDD--115515-150 5.00
GGDD--225530-250 10.00
GGDD--330040-350 10.00
LLaarrggee GGaauuggeess
(Round Tip, Dial Diameter 2 1/2")
JJOONNAARRDDRRAANNGGEEGGRRAADDUUAATTIIOONN
PPAARRTT NNOO..IINN GGRRAAMMSSIINN GGRRAAMMSS
GGDD--550060-500 20.00
GGDD--110000100-1000 25.00
GGDD--220000200-2000 50.00
GGDD--440000400-4000 100.00
GGPPPP--88
GGPPPP--3366
GGPPPP--7722
GGPPPP--1155
INDUSTRIES CORP.
Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com
51
REMOVE PANEL KNOCKOUTS WITHOUT CUTTING HOLES IN THE DRYWALL
(For use on electrical, security, alarm, and datacom panels)
KNOCKOUT KIT
PATENT
PENDING
After removing the
panel cover place the
panel buddy on the edge
of the panel in front of
knockout to be removed.
Next insert the modified
screwdriver through the
hole and between the
drywall under the knockout.
Push to loosen the knockout.
Using the screwdriver, remove
the panel knockout.
WARNING: Do not use near live circuits.
Intended for use by licensed professionals.
JJOONNAARRDD
PP//NNDDeessccrriippttiioonn
WBK-100 Knockout Kit
STEP
1
STEP
2
STEP
3
STEP
4
LIFETIME WARRANTY
This product is warranted to be free from
defects in materials and workmanship for
the normal life of the product. For complete
details visit: www.jonard.com
Installation • Maintenance • Repair
134 Marbledale Road • Tuckahoe, New York 10707
Phone: (914) 793-0700 • Fax: (914) 793-4527
sales@jonard.com • www.jonard.com
Tools for Telecom, Fiber Optics, CATV,
Wireless and Electronics Industries
Div. of Jonard Industries
