US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
AEC
Q200 105°C
+
Halogen
Free
Shielded Power Inductors
–
LPS3015
Document 436-1
Document 436-1 Revised 12/20/16
DCR SRF Isat (A)5 Irms (A)6
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
LPS3015-102MR_ 1.0 0.075 190 2.4 2.4 2.5 1.4 2.0
LPS3015-152MR_ 1.5 0.100 140 2.2 2.2 2.3 1.3 1.7
LPS3015-182MR_ 1.8 0.100 135 2.1 2.1 2.3 1.1 1.4
LPS3015-222MR_ 2.2 0.110 110 2.0 2.1 2.1 1.1 1.4
LPS3015-332MR_ 3.3 0.130 90 1.4 1.5 1.5 1.0 1.4
LPS3015-472MR_ 4.7 0.200 79 1.1 1.2 1.2 0.90 1.2
LPS3015-682MR_ 6.8 0.300 58 0.83 0.86 0.89 0.68 0.90
LPS3015-103MR_ 10 0.440 48 0.60 0.69 0.73 0.55 0.75
LPS3015-153MR_ 15 0.700 35 0.58 0.61 0.62 0.44 0.59
LPS3015-183MR_ 18 0.750 33 0.56 0.58 0.59 0.43 0.58
LPS3015-223MR_ 22 0.825 30 0.48 0.49 0.50 0.42 0.57
LPS3015-333MR_ 33 1.30 23 0.39 0.41 0.42 0.35 0.48
LPS3015-473MR_ 47 1.55 17 0.36 0.38 0.39 0.30 0.40
LPS3015-683MR_ 68 2.35 14 0.29 0.30 0.31 0.25 0.33
LPS3015-104MR_ 100 3.40 11 0.24 0.25 0.26 0.19 0.26
LPS3015-124MR_ 120 4.65 9.0 0.21 0.22 0.22 0.17 0.23
LPS3015-154MR_ 150 6.25 8.0 0.19 0.20 0.20 0.15 0.20
LPS3015-184MR_ 180 8.60 7.5 0.16 0.17 0.17 0.13 0.175
LPS3015-224MR_ 220 9.50 6.0 0.15 0.16 0.16 0.11 0.155
1. Please specify termination and packaging codes:
LPS3015-333MRC
Termination: R = RoHS compliant matte tin over nickel
over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
B = Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D = 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (3500 per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same for
parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at 25°C that causes the specified induc-
tance drop from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise
from 25°C ambient. This information is for reference
only and does not represent absolute maximum rat-
ings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 40 – 45 mg
Ambient temperature –40°C to +105°C with (40°C rise) Irms current.
Maximum part temperature +145°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +145°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,
0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
• Very low DCR; excellent current handling
• Miniature 3.0 × 3.0 mm footprint; less than 1.5 mm tall
Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH parts (3 each)
from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 µH to
33 µH parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of
220 µH to 3300 µH parts (3 each) from all five series. For details of kit contents and
to order, contact Coilcraft or visit http://order.coilcraft.com.
Sample
& buy
Support
& FAQ
Web
page
Tools &
softw
are
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
AEC
Q200 105°C
+
Halogen
Free
Shielded Power Inductors
–
LPS3015 Series
Document 436-2
Typical L vs Current
0.01 0.1
110
0.1
1
10
100
Inductance (µH)
0.01 0.1
110
Current (A)
4.7 µH
22 µH
33 µH
10 µH
3.3 µH
2.2 µH
1.0 µH
Typical L vs Frequency
0.01 0.1
110
0.1
1
10
100
Inductance (µH)
0.01 0.1
110
Frequency (MHz)
4.7 µH
22 µH
33 µH
10 µH
3.3 µH
2.2 µH
1.0 µH
Dimensions are in inches
mm
Document 436-1 Revised 12/20/16
Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,
0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth
NOTE NEW PART ORIENTATION Parts are rotated 90° in the
packaging tape compared to previous versions of this product.
NEW OLD
123
123
123
123 123 123
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Coilcraft:
LPS3015-153MLC LPS3015-223MLC LPS3015-104MLC LPS3015-683MLC LPS3015-472MLC LPS3015-334MLC
LPS3015-223MLB LPS3015-224MLB LPS3015-103MLB LPS3015-154MLB LPS3015-682MLB LPS3015-683MLB
LPS3015-473MLC LPS3015-332MLB LPS3015-183MLC LPS3015-222MLB LPS3015-152MLC LPS3015-154MLC
LPS3015-334MLB LPS3015-333MLB LPS3015-184MLC LPS3015-153MLB LPS3015-102MLC LPS3015-182MLC
LPS3015-472MLB LPS3015-124MLB LPS3015-152MLB LPS3015-473MLB LPS3015-333MLC LPS3015-124MLC
LPS3015-332MLC LPS3015-224MLC LPS3015-222MLC LPS3015-103MLC LPS3015-682MLC LPS3015-102MLB
LPS3015-184MLB LPS3015-182MLB LPS3015-183MLB LPS3015-104MLB LPS3015-152MRC LPS3015-102MRC
LPS3015-102MRB LPS3015-152MRB LPS3015-104MRC LPS3015-153MRB LPS3015-154MRC LPS3015-183MRB
LPS3015-683MRC LPS3015-223MRC LPS3015-222MRB LPS3015-682MRC LPS3015-683MRB LPS3015-
222MRC LPS3015-472MRC LPS3015-473MRB LPS3015-473MRC LPS3015-682MRB LPS3015-332MRB
LPS3015-182MRB LPS3015-224MRB LPS3015-224MRC LPS3015-332MRC LPS3015-333MRB LPS3015-333MRC
LPS3015-472MRB LPS3015-153MRC LPS3015-154MRB LPS3015-182MRC LPS3015-183MRC LPS3015-
184MRB LPS3015-223MRB LPS3015-184MRC LPS3015-103MRB LPS3015-103MRC LPS3015-104MRB
LPS3015-124MRB LPS3015-124MRC
