STP120NF10, STB120NF10 STF120NF10, STW120NF10 N-channel 100 V, 0.009 , 110 A STripFETTM II Power MOSFET in TO-247, TO-220, DPAK, TO-220FP Features Type VDSS STW120NF10 STP120NF10 STB120NF10 STF120NF10 100V RDS(on) max ID <0.0105 110 A 110 A 110 A 41 A Exceptional dv/dt capability 100% avalanche tested Application oriented characterization 3 1 TO-247 DPAK 3 3 1 2 1 2 TO-220FP TO-220 Application Switching applications Figure 1. Internal schematic diagram Description These devices are N-channel Power MOSFET realized with STMicroelectronics unique STripFETTM process has specifically been designed to minimize the on-resistance. It is therefore suitable as primary switch in advanced high-efficiency, high-frequency isolated DC-DC converters for telecom and computer application. It is also intended for any applications with low gate drive requirements. Table 1. Device summary Order codes Marking Packages Packaging STB120NF10 B120NF10 DPAK Tape and reel STF120NF10 120NF10 TO-220FP STP120NF10 P120NF10 TO-220 STW120NF10 W120NF10 TO-247 May 2011 Doc ID 9522 Rev 7 Tube 1/21 www.st.com 21 Contents STB/F/PW120NF10 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 2/21 .............................................. 9 Doc ID 9522 Rev 7 STB/F/PW120NF10 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter Unit TO-220, TO-247, TO-220FP DPAK VDS Drain-source voltage (VGS = 0) 100 V VGS Gate-source voltage 20 V ID Drain current (continuous) at TC = 25 C 110 41 (1) A ID Drain current (continuous) at TC=100 C 77 29(1) A Drain current (pulsed) 440 164 (1) A Total dissipation at TC = 25 C 312 45 W Derating factor 2.08 0.30 W/C IDM (2) PTOT dv/dt (3) Peak diode recovery voltage slope 10 V/ns EAS(4) Single pulse avalanche energy 550 mJ TJ Operating junction temperature Storage temperature -55 to 175 C Tstg 1. Limited only by maximum temperature allowed. 2. Pulse width limited by safe operating area. 3. ISD 120 A, di/dt 300 A/s, VDD = 80%V(BR)DSS 4. Starting Tj = 25 C, ID = 60 A, VDD = 50 V Table 3. Thermal resistance Value Symbol Parameter Unit TO-220 TO-247 DPAK TO-220FP Rthj-case Thermal resistance junction-case max Rthj-amb Thermal resistance junction-ambient max 0.48 62.5 Rthj-pcb(1) Thermal resistance junction-pcb max TL Maximum lead temperature for soldering purpose 3.33 C/W 62.5 C/W 35 300 C/W 300 C 1. When mounted on 1inch FR-4 board, 2 oz Cu Doc ID 9522 Rev 7 3/21 Electrical characteristics 2 STB/F/PW120NF10 Electrical characteristics (TCASE = 25 C unless otherwise specified) Table 4. Symbol V(BR)DSS On/off states Parameter Test conditions Drain-source breakdown voltage ID = 250 A, VGS= 0 Min. Typ. 100 Zero gate voltage drain current (VGS = 0) IGSS Gate body leakage current (VDS = 0) VGS = 20 V VGS(th) Gate threshold voltage VDS= VGS, ID = 250 A RDS(on) Static drain-source on resistance VGS= 10V, ID= 60 A (1) Unit V VDS = Max rating, IDSS Max. 1 10 A A 100 nA 4 V 0.009 0.0105 Min. Typ. Max. Unit - 90 S - 5200 785 325 pF pF pF - 172 32 64 VDS = Max rating@125C 2 1. For TO-220FP ID = 40 A Table 5. Dynamic Symbol Parameter gfs (1) Forward transconductance VDS =25 V, ID = 60 A Input capacitance Output capacitance Reverse transfer capacitance VDS =25 V, f=1 MHz, VGS=0 Total gate charge Gate-source charge Gate-drain charge VGS =10 V Ciss Coss Crss Qg Qgs Qgd Test conditions VDD=80 V, ID = 120 A (see Figure 16) 1. Pulsed: pulse duration=300s, duty cycle 1.5% 4/21 Doc ID 9522 Rev 7 233 nC nC nC STB/F/PW120NF10 Table 6. Symbol td(on) tr td(off) tf Table 7. Symbol ISD Electrical characteristics Switching times Parameter Test conditions Turn-on delay time Rise time Turn-off delay time Fall time Min. Typ. Max. Unit - 25 90 132 68 - ns ns ns ns Min. Typ. Max. Unit VDD=50 V, ID= 60 A, RG=4.7 , VGS=10 V (see Figure 15) Source drain diode Parameter Test conditions Source-drain current - 110 A ISDM(1) Source-drain current (pulsed) - 440 A VSD(2) Forward on voltage - 1.3 V trr Qrr IRRM ISD=120 A, VGS=0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD=120 A, di/dt = 100 A/s, VDD=40 V, Tj=150 C (see Figure 20) - 152 760 10 ns nC A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300s, duty cycle 1.5% Doc ID 9522 Rev 7 5/21 Electrical characteristics STB/F/PW120NF10 2.1 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 7. Transfer characteristics !-V ON $ 3 / ,I PER M AT ITE IO D NI BY N M THIS AX A 2 REA IS )$ ! S MS MS 4J # 4C # 3INGLE PULSE Figure 6. 6/21 Output characterisics 6$36 Doc ID 9522 Rev 7 STB/F/PW120NF10 Figure 8. Electrical characteristics Normalized BVDSS vs temperature Figure 9. Static drain-source on resistance Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations Figure 12. Normalized gate threshold voltage vs temperature Figure 13. Normalized on resistance vs temperature Doc ID 9522 Rev 7 7/21 Electrical characteristics STB/F/PW120NF10 Figure 14. Source-drain diode forward characteristics 8/21 Doc ID 9522 Rev 7 STB/F/PW120NF10 3 Test circuits Test circuits Figure 15. Switching times test circuit for resistive load Figure 16. Gate charge test circuit VDD 12V 47k 1k 100nF 3.3 F 2200 RL F VGS IG=CONST VDD 100 Vi=20V=VGMAX VD RG 2200 F D.U.T. D.U.T. VG 2.7k PW 47k 1k PW AM01469v1 AM01468v1 Figure 17. Test circuit for inductive load Figure 18. Unclamped inductive load test switching and diode recovery times circuit A A D.U.T. FAST DIODE B B L A D G VD L=100H S 3.3 F B 25 1000 F D VDD 2200 F 3.3 F VDD ID G RG S Vi D.U.T. Pw AM01470v1 Figure 19. Unclamped inductive waveform AM01471v1 Figure 20. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 0 Doc ID 9522 Rev 7 10% AM01473v1 9/21 Package mechanical data 4 STB/F/PW120NF10 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 10/21 Doc ID 9522 Rev 7 STB/F/PW120NF10 Table 8. Package mechanical data TO-220FP mechanical data mm Dim. Min. Typ. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 Figure 21. TO-220FP drawing L7 E A B D Dia L5 L6 F1 F2 F G H G1 L4 L2 L3 7012510_Rev_K Doc ID 9522 Rev 7 11/21 Package mechanical data Table 9. STB/F/PW120NF10 DPAK (TO-263) mechanical data mm Dim. Min. Typ. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 E 10 E1 8.50 10.40 e 2.54 e1 4.88 5.28 H 15 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R V2 12/21 Max. 0.4 0 8 Doc ID 9522 Rev 7 STB/F/PW120NF10 Package mechanical data Figure 22. DPAK (TO-263) drawing 0079457_R Figure 23. DPAK footprint(a) 16.90 12.20 5.08 1.60 3.50 9.75 Footprint a. All dimension are in millimeters Doc ID 9522 Rev 7 13/21 Package mechanical data Table 10. STB/F/PW120NF10 TO-220 type A mechanical data mm Dim. Min. Typ. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 14/21 Max. 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 P 3.75 3.85 Q 2.65 2.95 Doc ID 9522 Rev 7 STB/F/PW120NF10 Package mechanical data Figure 24. TO-220 type A drawing 0015988_typeA_Rev_S Doc ID 9522 Rev 7 15/21 Package mechanical data Table 11. STB/F/PW120NF10 TO-247 mechanical data mm Dim. Min. Typ. A 4.85 5.15 A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e 5.45 L 14.20 14.80 L1 3.70 4.30 L2 18.50 P 3.55 3.65 R 4.50 5.50 S 16/21 Max. 5.50 Doc ID 9522 Rev 7 STB/F/PW120NF10 Package mechanical data Figure 25. TO-247 drawing 0075325_F Doc ID 9522 Rev 7 17/21 Packaging mechanical data 5 STB/F/PW120NF10 Packaging mechanical data Table 12. DPAK (TO-263) tape and reel mechanical data Tape Reel mm mm Dim. 18/21 Dim. Min. Max. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base qty 1000 P2 1.9 2.1 Bulk qty 1000 R 50 T 0.25 0.35 W 23.7 24.3 Doc ID 9522 Rev 7 Min. Max. 330 13.2 26.4 30.4 STB/F/PW120NF10 Packaging mechanical data Figure 26. Tape 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F W K0 B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v2 Figure 27. Reel T REEL DIMENSIONS 40mm min. Access hole At sl ot location B D C N A Full radius Tape slot in core for tape start 25 mm min. width G measured at hub AM08851v2 Doc ID 9522 Rev 7 19/21 Revision history 6 STB/F/PW120NF10 Revision history Table 13. 20/21 Revision history Date Revision Changes 20-Mar-2006 2 Preliminary datasheet 31-Mar-2006 3 Typing error 19-Jun-2006 4 New template, no content change 28-Jun-2006 5 New ID value on Table 2 05-Oct-2006 6 New value on Table 7 11-May-2011 7 Added new package and mechanicala data: TO-220FP. Doc ID 9522 Rev 7 STB/F/PW120NF10 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 9522 Rev 7 21/21