8533 Series 239-250_mod:Mise en page 1 24/02/2009 11:15 Page 239 8533 Series Description Applications * Screw coupling * Interchangeable and intermateable with MIL-C 83723 Series III T type * Plug with self locking system * High temperature connector * High level shock and vibration * Thermocouple contacts available except hermetic connectors. Engine area/sensors in harsh environments, railways (brake system), for all purposes in severe climatical environment and high temperature. Standards NFL 54143 - EN 2997 Characteristics Mechanical Electrical * Shell : aluminum alloy (class R-W-A) stainless steel (class K, E, Y and YE) * Plating : nickel (class R) olive green cadmium (class W) black anodized (class A) passivated (class K, E, Y and YE) * Insulator : thermoset * Grommet and seal : silicone elastomer * Contact : copper alloy ferrous alloy (class Y and YE) * Plating : gold over nickel * Mechanical endurance : 250 operations (class R and W) 500 operations (class K, E, Y and YE) * Shock : 300 g during 3 ms * Vibration : random 5 Hz to 2000 Hz 1 G2/Hz (2x8 hours) * Contact retention : size 20 : 090 N size 16 : 111 N size 12 : 133 N * Dielectric withstanding Climatic Altitude Service At ground 15 000 m 21 000 m 33 000 m 1500 600 400 200 Vrms Vrms Vrms Vrms * Contact resistance : as per NFL 54143 and EN 2997 * Insulation resistance : > 5000 M at 500 Vdc * Max current rating per contact : size 20 : 7.5 A size 20 : 05 A class Y size 16 : 13,0 A size 16 : 10 A and YE size 12 : 23,0 A size 12 : 17 A * Electrical continuity : - 5 m with RFI shielded - 60 m without RFI shielded * Shielding : to 100 MHz at 1 GHz attenuation > 65 dB } * Working temperature : - 65C to 175C (class W) - 65C to 200C (class R, A, K and Y) - 65C to 260C cyclic (class E and YE) * Leakage : low pressure immersion L54001 and interfacial sealing : pressure 2kPa * Hermeticity : differential pressure of 1 bar (air helium) leakage is 0,36 mm3/hr * Damp heat : as per NFL 54143 and EN 2997 10 cycles of 24 hours * Salt spray : 48 hours (class R-K-E-Y and YE) 500 hours (class W) * Fire resistance : as per NFL 54143 and EN 2997 (class K and E) Resistance to fluids MIL-H 5606 - SKYDROL 500 B4 - LD4 JP5 - MIL-L 7870 A - MIL-L 23699 MIL-L 7808 - MIL-C 25769 - MIL-A 8243 Ordering information Environmental connectors 8533 basic series shell type class - 0 R 0 7 3 4 - square flange receptacle jam nut receptacle plug with self locking and RFI shielding plug with self locking W R A K E - 175C (aluminum version with olive green cadmium plating) 200C (aluminum version with nickel plating) 200C (aluminum version with black anodized plating) 200C (stainless steel version) 260C (stainless steel version) S 14 - 15 P N * S - with 360 teeth shell size contact layouts contact type polarization - 08-10-12-14-16-18-20-22-24-26-28 - see table p 243 P - male S - female - N-6-7-8-9-Y - see p 244 specification without specification - connector supplied with standard contacts 08 - connector supplied with large barrel contacts L - connector supplied without contacts 239 1 8533 Series 239-250_mod:Mise en page 1 24/02/2009 11:15 Page 240 8533 Series Backshells aluminum version 852 - 31 N 14 8527 - 01 14 * 10 - 05 P N 83723 - 21 R 14 basic series backshell type 31 - backnut 52 - straight cable clamp 51 - elbow cable clamp plating N - nickel A - black anodized W - olive green cadmium shell size - 08-10-12-14-16-18-20-22-24 Backshells stainless steel version basic series backshell type shell size specification 01 - backnut 02 - straight cable clamp - 08-10-12-14-16-18-20-22-24 A - obligatory suffix for backshell type 02 only NOTE : for others types and sizes backshells - See catalogue M 85049 Hermetic connectors 8533 basic series shell type class shell size contact layouts contact type polarization - 1 Y 1 - solder fixing receptacle 2 - square flange receptacle 7 - jam nut receptacle Y - 200 YE - 260 - 08-10-12-14-16-18-20*-22-24* see table p 243 P - male only see table p 244 * Consult us Protective caps aluminum version basic series cap type 21 - cap for receptacle 22 - cap for plug plating R - nickel W - olive green cadmium A - black anodized shell size - 08-10-12-14-16-18-20-22 240 2 8533 Series 239-250_mod:Mise en page 1 24/02/2009 11:15 Page 241 8533 Series Cross reference list Souriau EN 2997 NFL 54143 (1) AEROSPATIALE ROLLS ROYCE Description ASN-E0455-01 ** N - 852-52N ** - ASN-E0455-02 ** N - 852-51N ** - ASN-E0455-03 ** N - 8527-01 ** - ASN-E0199-01 ** K - 8527-02 ** A - ASN-E0199-02 ** K - 8526-1348 EN 3155-018 M 2020 - - Standard size 20 8526-1349 EN 3155-018 M 1616 NSA 938 151 PA 1600 - Standard size 16 8526-1350 EN 3155-018 M 1212 NSA 938 151 PA 1200 - Standard size 12 8522-2349A EN 3155-018 M 2018 NSA 938 151 PA 2000 - Large barrel size 20 8522-6179A EN 3155-018 M 1614 NSA 938 151 PA 1601 - Large barrel size 16 8526-4175 EN 3155-018 M 1618 NSA 938 151 PA 1602 - 8526-5041 EN 3155-018 M 1218 NSA 938 151 PA 1202 - 8526-1344 EN 3155-019 F 2020 8526-1346 EN 3155-019 F 1616 NSA 938 152 SA 1600 - 8526-1347 EN 3155-019 F 1212 NSA 938 152 SA 1200 - 8520-292 EN 3155-019 F 2018 NSA 938 152 SA 2000 - 8522-6180A EN 3155-019 F 1614 NSA 938 152 SA 1601 - 8526-4176 EN 3155-019 F 1618 NSA 938 152 SA 1602 - 8526-5591 EN 3155-019 F 1218 NSA 938 152 SA 1202 - 8533-1000 EN 3155-004 M 2020 8533-1004 EN 3155-004 M 1616 ASN-E 0445 FW 1600 ESC30 P16 BC 8533-1002 EN 3155-004 M 2018 ASN-E 0445 FW 2001 - Large barrel size 20 8533-1006 EN 3155-004 M 1614 ASN-E 0445 FW 1601 - Large barrel size 16 8533-1008 EN 3155-004 M 1618 ASN-E 0445 FW 1602 - 8533-1035 EN 3155-004 M 1212 ASN-E 0445 FW 1200 ESC30 P12 BC 8533-1019 EN 3155-044 M 2022 - - 8533-1011 900 EN 3155-005 F 2020 - ESC30 S20 BC 8533-1012 900 EN 3155-005 F 1616 ASN-E 0446 DW 1600 ESC30 S16 BC 8533-1003 EN 3155-005 F 2018 ASN-E 0446 DW 2001 - Large barrel size 20 8533-1007 EN 3155-005 F 1614 ASN-E 0446 DW 1601 - Large barrel size 16 8533-1009 EN 3155-005 F 1618 ASN-E 0446 DW 1602 - 8533-1036 EN 3155-005 F 1212 ASN-E 0446 DW 1200 ESC30 S12 BC 8533-1018 EN 3155-045 F 2022 - - Double crimping size 20 8533KE3C** EN2997KE3C** - - Projective caps receptable 3 version Male Backnut Straight cable clamp Small barrel size 16 Small barrel size 12 Standard size 20 Standard size 16 Standard size 12 Female Large barrel size 20 Large barrel size 16 Small barrel size 16 Contact Small barrel size 12 Standard size 20 Male Standard size 16 Small barrel size 16 Small barrel size 1 Class 260 C Double crimping size 20 Standard size 20 Female Standard size 16 Small barrel size 16 version Standard size 12 steel ESC30 P20 BC steel Stainless Class 175 C and 200 C - - Straight cable clamp Elbow cable clamp Stainless - Backnut version - Aluminum 852-31 ** 241 8533 Series 239-250_mod:Mise en page 1 24/02/2009 11:15 Page 242 8533 Series Cross reference list 08(3) - L L - - - - - - - EN2997-RS0 **-** M F - - - - EN2997-WS0 **-** M F EN2997-RS0 **-** A B EN2997-WS0 **-** A B - - - - ASN-E0454RS **-** P S A - - - - - - - 08(3) - 08(3) - L L 08(3) 08 (3 L L ASN-E0454RS **-** P S ROLLS ROYCE ASN-E0452RS **-** P S - - - - - - - EN2997-RS6 **-** M F - - - - EN2997-WS6 **-** A B EN2997-RS6 **-** A B EN2997-WS6 **-** A B - - - - ASN-E0452RS **-** P S A - - - EN2997-R6 **-** M F EN2997-W6 **-** M F EN2997-R6 **-** A B EN2997-W6 **-** A B - - - - ASN-E0451R **-** P S - - - - - - - - - - - - - - - ASN-E0451R **-** P S A - - - - - - - - - - - - - - - - - - - plug with self locking plug with self locking EN2997-S6 **-** M F EN2997-S6 **-** A B (3) 8533-4KS **-** P S 08 8533-4KS **-** P S 8533-4KS **-** P S L - - - - EN2997-K6 **-** M F EN2997-K6 **-** A B - - - - - - - - - - - - - - - - 8533-1Y **-** P EN2997-Y1 **-** M - - - - **-** P EN2997-Y0 **-** M - - - - 8533-7Y **-** P EN2997-Y7 **-** M - - - - (3) 8533-3ES **-** P S 08 8533-3ES **-** P S 8533-3ES **-** P S L (3) 8533-4ES **-** P S 08 EN2997-SE0 **-** M F EN2997-SE0 **-** A B EN2997-SE6 **-** M F EN2997-SE6 **-** A B - ASN-E0444SE **-** P S - BACC63BT **B** P S ASN-E0444SE **-** P S A BACC63CN**-** P S ASN-E0442SE **-** P S - A ASN-E0441KE**-** P S A BACC63BT **B** P S ASN-E0442SE**-** P S square flange receptacle and RFI shielded 8533-2Y (3 8533-0ES **-** P S 08 P 8533-0ES **-** S 8533-0ES **-** P S L plug with self locking - (3 8533-3KS **-** P S 08 8533-3KS **-** P S 8533-3KS **-** P S L - Plug with self locking and RFI shielded - EN2997-S0 **-** M F EN2997-S0 **-** A B - Square flange receptacle - (3 8533-0KS **-** P S 08 8533-0KS **-** P S 8533-0KS **-** P S L - Description Aluminum version - BOEING BACC 63 BR/BT(2) Class 175 C and 200 C 08(3) BOEING BACC 63 CN/CM BACC63CM**-** P S - Stainless steel version 8533-0RS **-** P S 8533-0WS **-** P S 8533-0RS **-** P S 8533-0WS **-** P S 8533-0RS **-** P S 8533-0WS **-** P S 8533-3RS **-** P S 8533-3WS **-** P S 8533-3RS **-** P S 8533-3WS **-** P S 8533-3RS **-** P S 8533-3WS **-** P S 8533-4RS **-** P S 8533-4WS **-** P S 8533-4RS **-** P S 8533-4WS **-** P S 8533-4RS **-** P S 8533-4WS **-** P S AEROSPATIALE solder fixing receptacle square flange hermetic receptacle jam nut hermetic receptacle square flange receptacle ESC10KE0 **-** P S - - plug with self locking BACC63BR **B** P S A BACC63BR **B** P S - and RFI shielded ESC10SE6 **-** P S Class 260 C EN 2997 NFL 54143 (1) Souriau - - - - - - - - - - - EN2997-YE1 **-** M - - - ESC10YE1 **-** P solder fixing receptacle 8533-2YE **-** P EN2997-YE0 **-** M - - - ESC10YE2 **-** P square flange hermetic receptacle 8533-7YE **-** P EN2997-YE7 **-** M - - jam nut hermetic receptacle 8533-4ES **-** P S 8533-4ES **-** P S L EN2997-KE6 **-** M F EN2997-KE6 **-** A B 8533-KE5 ** EN2997-KE5 ** 8533-1YE **-** P ASN-E0441KE**-** P S A plug with self locking ESC10KE6 **-** P S - dummy receptacle (1) : Part numbers in specification NLF 54143. Replace EN 2997 by 3. (2) : Superseded by BACC 63 CN/CM (3) : 08 for #20 contacts layouts 242 4 8533 Series 239-250_mod:Mise en page 1 24/02/2009 11:16 Page 243 8533 Series Contact layouts viewed from front face of male insulator class 200C class 260C hermetic 08 08-03 3#20 08-98 3#20 10 10-05 5#20 10-06 6#20 12 12-03 3#16 12-12 12#20 14 14-04 4#12 14-07 7#16 9#20 3#16 14-12 5 2 3 10#16 16-24 24#20 4 44 Coax 50 SN393 15#20 1 16 16-10 14-15 1#16 18 18-14 14#16 18-31 31#20 18-08 8#12 20 20-39 37#20 2#16 20-41 41#20 20-16 16#16 22 22-12 12#12 22-19 19#16 22-39 27#20 12#16 22-55 55#20 24 24-61 61#20 24-30 30#16 28 Consult us - Special product. 28-42 42#16 For other contacts layout please consult us. 243 5 8533 Series 239-250_mod:Mise en page 1 24/02/2009 11:16 Page 244 8533 Series Polarization positions key einsert N 6 7 8 9 Y 0 0 0 0 0 0 positions key einsert N 6 7 0 0 0 8 9 Y 0 0 0 a shell 08 b c 105 102 80 35 140 132 118 140 215 248 230 205 alternative shell key and insert positions (MIL STD 1554) shell 10 shell 12 shell 14 d a b c d a b c d a b c d a shell 16 b c d a shell 18 b c d 265 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265 320 102 132 248 320 18 149 192 259 18 149 192 259 18 149 192 259 18 149 192 259 312 80 118 230 312 92 152 222 342 92 152 222 342 92 152 222 342 92 152 222 342 275 35 140 205 275 84 152 204 334 84 152 204 334 84 152 204 334 84 152 204 334 24 135 199 240 24 135 199 240 24 135 199 240 98 152 268 338 98 152 268 338 alternative shell key and insert positions (MIL STD 1554) shell 20 shell 22 shell 24 a b c d a b c d a b c d view of front face of plug a shell 28 b c d 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265 18 149 192 259 18 149 192 259 18 149 192 259 18 149 192 259 92 152 222 342 92 152 222 342 92 152 222 342 92 152 222 342 84 152 204 334 24 135 199 240 98 152 268 338 Crimp contacts class 260C class 175C and 200C contact size part numbers male contact female contact type code by colour bands admissible wire section AWG mm2 external o over insulator min. Max. 20 standard large barrel 8526-1348 8522-2349A 8526-1344 8520-292 red - red red - violet 24-20 24-18 0.21-0.60 0.21-0.93 0.85 0.85 2.10 2.10 16 standard large barrel small barrel 8526-1349 8522-6179A 8526-4175 8526-1346 8522-6180A 8526-4176 blue - blue blue - orange blue - orange 20-16 18-14 22-18 0.60-1.34 0.93-1.91 0.38-0.93 1.20 1.20 1.20 2.70 2.70 2.70 12 standard large barrel 8526-1350 8526-5041 8526-1347 8526-5591 yellow - yellow yellow - violet 14-12 22-18 1.91-3.18 0.38-0.93 1.90 1.90 4.01 4.01 20 standard large barrel 8533-1000 8533-1002 8533-1001 8533-1003 red - red + 1 white dot red - violet + 1 white dot 24-20 22-18 0.25-0.60 0.38-0.93 0.85 0.85 2.10 2.10 20 double crimping 8533-1019 8533-1018 red - green + 1 white dot 22 0.4 - 1.25 16 standard large barrel small barrel 8533-1004 8533-1006 8533-1008 8533-1005 8533-1007 8533-1009 blue - blue + 1 white dot blue - orange + 1 white dot blue - violet + 1 white dot 20-16 18-14 22-18 0.60-1.34 0.93-1.91 0.38-0.93 1.20 1.20 1.20 2.70 2.70 2.70 12 standard 8533-1035 8533-1036 yellow - yellow + 1 white dot 14-12 1.91-3.18 1.90 4.01 Thermocouple contacts type contact size standard class 175C and 200C male contact C : chromel A : alumel 20 large barrel 16 standard 12 standard female contact part numbers code by colour bands part numbers code by colour bands C 8522-875A brown-orange-green 8522-877A brown-yel.-brown A 8522-876A brown-orange-yel. 8522-878A brown-yel.-black C 8522-3761 yellow 2 dots 8522-3770 yellow 2 dots A 8522-3760 black 2 dots 8522-3771 black 2 dots C 8522-881 yellow 1 dot 8522-883 yellow 1 dot A 8522-882 black 1 dot 8522-884 black 1 dot C 8522-887 yellow 1 dot 8522-889 yellow 1 dot A 8522-888 black 1 dot 8522-890 black 1 dot 244 6 admissible wire section 2 external o over insulator min. Max. 0.21-0.60 0.85 2.10 22-18 0.38-0.93 0.85 2.10 20-16 0.60-1.34 1.20 2.70 14-12 1.91-3.18 1.90 4.01 AWG mm 24-20 8533 Series 239-250_mod:Mise en page 1 24/02/2009 11:16 Page 245 8533 Series Dimensions Plug type 3 classes WS - RS - KS - ES and type 4 classes WS - AS - KS - ES with backshells Aluminum backshells O for flange Backnut 31 Straight cable clamp 52 Elbow cable clamp 51 shell size 08 10 12 14 16 18 20 22 24 28 A Max 21.30 24.90 29.60 31.25 34.42 37.34 41.91 44.07 47.24 52.00 .839 .980 1.165 1.230 1.355 1.470 1.650 1.735 1.860 2.047 1/2"-20 Thread UNEF 2A C Max 34.50 5/8"-24 UNEF 2A 34.50 3/4"-20 UNEF 2A 34.50 7/8"-20 UNEF 2A 34.50 1"-20 UNEF 2A 34.50 1-1/16"-18 UNEF 2A 34.50 1-3/16"-18 UNEF 2A 34.50 1-5/16"-18 UNEF 2A 34.50 1-7/16"-18 UNEF 2A 34.50 1-3/4"-18 UNEF 2A 34.50 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 D Max 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45 - .616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593 - E 6.75 9.40 12.80 14.75 17.93 19.94 23.11 26.29 29.20 - .266 .370 .504 .581 .706 .785 .910 1.035 1.150 - F Max 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 - .506 .506 .506 .506 .506 .506 .506 . 506 .506 - L1 Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 - B O for flange Stainless steel backshells 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 - min 3.20 4.75 7.40 8.90 12.75 13.45 14.75 16.35 17.95 - .126 .187 .291 .350 .502 .530 .581 .644 .707 - Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 - .205 .285 .417 .476 .626 .705 .831 .957 1.083 - H Max 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10 - .752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776 - J Max 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75 - .892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841 - L2 Max 45.80 47.60 51.00 51.00 54.00 61.00 63.60 67.50 69.90 - 1.803 1.874 2.008 2.008 2.126 2.402 2.504 2.657 2.752 - N Max 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10 - .807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421 - min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 - .126 .187 .291 .350 .502 .518 .581 .644 .707 - Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 - .205 .285 .417 .476 .626 .705 .831 .957 1.083 - M Max 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.50 - 1.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713 - L3 Max 50.75 52.45 55.05 56.55 60.45 61.85 63.40 65.05 66.65 - 1.998 2.065 2.167 2.226 2.380 2.435 2.496 2.561 2.624 - P Max 15.20 18.30 21.50 24.70 28.70 29.60 32.90 36.00 39.50 - .598 .720 .846 .972 1.130 1.165 1.295 1.417 1.555 - Q Max 7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50 - .295 .382 .508 .587 .711 .789 .921 1.039 1.161 - R Max 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 - .500 .500 .500 .500 .500 .500 .500 .500 .500 - L4 Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 - G Backnut 01 O for flange L Straight cable clamp 02 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 - min 3.18 4.75 7.40 8.91 12.72 13.16 14.76 16.36 17.93 - .125 .187 .291 .351 .501 .518 .581 .644 .706 - Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46 - .204 .286 .416 .476 .623 .706 .831 .956 1.081 - T Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10 - .752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776 - U Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60 - .886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874 - L5 Max 45.80 48.65 51.80 51.80 55.00 61.35 64.80 67.70 70.90 - 1.803 1.915 2.039 2.039 2.165 2.415 2.551 2.665 2.791 - S 245 7 8533 Series 239-250_mod:Mise en page 1 24/02/2009 11:16 Page 246 8533 Series Square flange receptacle type 0 classes WS - RS - AS - KS - ES with backshells Aluminum backshells Thread as plug (DIM.B) O for flange Backnut 31 Straight cable clamp 52 shell size 08 10 12 A Max 14.27 17.48 22.22 .562 .688 .875 .938 1.062 1.188 1.312 1.438 1.562 1.811 B Max 18.35 18.35 18.35 18.35 18.35 18.35 18.35 18.35 18.35 18.35 .722 .722 .722 .722 .722 .722 .722 .722 .722 .722 Min 1.32 1.32 1.32 1.32 1.32 1.32 1.32 1.32 1.32 1.32 .052 .052 .052 .052 .052 .052 .052 .052 .052 .052 Max 1.82 1.82 1.82 1.82 1.82 1.82 1.82 1.82 1.82 1.82 .072 .072 .072 .072 .072 .072 .072 .072 .072 D Max 12.66 15.84 19.02 22.19 25.36 26.95 30.12 33.30 36.47 .498 .624 .749 .874 .998 1.061 1.186 1.311 1.436 1.748 E Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 F Max 20.75 23.95 26.31 28.69 31.88 34.24 36.63 39.80 43.38 50.83 .817 .943 1.036 1.130 1.255 1.348 1.442 1.567 1.708 2.001 G 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.92 39.67 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.562 C Elbow cable clamp 51 O for flange Stainless steel backshells O for flange Straight cable clamp 02 3.10 23.83 3.10 16 18 20 22 26.97 30.18 33.32 36.53 3.10 3.10 3.10 3.10 24 39.67 28 45.99 .072 44.41 H Max 3.10 3.90 3.90 .122 .122 .122 .122 .122 .122 .122 .122 .154 .154 J Max 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45 .616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593 - K 6.75 9.40 12.80 14.75 17.95 19.95 23.10 26.30 40.45 - .266 .370 .504 .581 .707 .785 .909 1.035 1.593 - L Max 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 - .506 .506 .506 .506 .506 .506 .506 .506 .506 - L1 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 - - 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 - Min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 - .126 .187 .291 .350 .502 .518 .581 .644 .707 - Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 - .205 .285 .417 .476 .626 .705 .831 .957 1.083 - N Max 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10 - .752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776 - P Max 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75 - .892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841 - L2 Max 47.40 49.20 52.60 52.60 55.60 62.60 65.20 69.10 71.50 - 1.866 1.937 2.071 2.071 2.189 2.465 2.567 2.720 2.815 - Q Max 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10 - .807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421 - Min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 - .126 .187 .291 .350 .502 .518 .581 .644 .707 - M Backnut 01 3.10 14 R Max 5.20 .205 .285 .417 .476 .626 .705 .831 .957 1.083 - S Max 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.50 - 1.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713 - L3 Max 52.35 54.05 56.65 58.15 62.05 63.45 65.00 66.65 68.25 - 2.061 2.128 2.230 2.289 2.443 2.498 2.559 2.624 2.687 - T Max 15.20 18.30 21.50 24.70 28.10 29.60 32.90 36.00 39.50 - .598 .720 .846 .972 1.106 1.165 1.295 1.417 1.555 - U Max 7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50 - .295 .382 .508 .587 .711 .789 .921 1.039 1.161 - V Max 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 - .500 .500 .500 .500 .500 .500 .500 .500 .500 - L4 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 - 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 - Min 3.18 4.75 7.40 8.91 12.72 13.16 14.76 16.36 17.93 - .125 .187 .291 .351 .501 .518 .581 .644 .706 - Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46 - .204 .286 .416 .476 .625 .706 .831 .956 1.081 - X Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10 - .752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776 - Y Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60 - .886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874 - L5 Max 47.40 50.25 53.40 53.40 56.60 62.95 66.40 69.30 72.60 - 1.866 1.978 2.102 2.102 2.228 2.478 2.614 2.728 2.858 - W 7.25 246 8 10.60 12.10 15.90 17.90 21.10 24.30 27.50 - 8533 Series 239-250_mod:Mise en page 1 24/02/2009 11:16 Page 247 8533 Series Jam nut receptacle type 7 classes WS - RS - AS - KS - ES with backshells Thread as plug (DIM.B) Aluminum backshells O for flange Backnut 31 Straight cable clamp 52 shell size A Max 08 10 12 14.27 17.47 22.22 .562 .688 .875 .938 1.062 1.188 1.312 1.438 1.562 B Max 19.84 19.84 19.84 19.84 19.84 19.84 19.84 19.84 19.84 .781 .781 .781 .781 .781 .781 .781 .781 .781 min 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 .125 .125 .125 .125 .125 .125 .125 .125 .125 Max 1.57 1.57 1.57 1.57 1.57 1.57 1.57 1.57 1.57 .062 .062 .062 .062 .062 .062 .062 .062 .062 E Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 F Max 27.38 30.28 35.05 38.51 41.68 44.86 49.63 52.78 55.42 1.078 1.192 1.380 1.516 1.641 1.766 1.954 2.078 2.182 G Max 24.89 28.04 32.79 35.33 38.51 41.68 44.86 49.63 52.81 .980 1.104 1.291 1.391 1.516 1.641 1.766 1.954 2.079 H Max 21.06 24.23 29.01 30.61 33.76 36.96 40.11 43.31 46.46 .829 .954 1.142 1.205 1.329 1.455 1.579 1.705 1.829 J Max 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45 .616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593 K 6.75 9.40 12.80 14.75 17.95 19.95 23.10 26.30 40.45 .266 .370 .504 .581 .707 .785 .909 1.035 1.593 L Max 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 .506 .506 .506 .506 .506 .506 .506 .506 .506 L1 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 min M Max 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 .126 .187 .291 .350 .502 .518 .581 .644 .707 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 .205 .285 .417 .476 .626 .705 .831 .957 1.083 N Max 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10 .752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776 P Max 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75 .892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841 L2 Max 47.40 49.20 52.60 52.60 55.60 62.60 65.20 69.10 71.50 1.866 1.937 2.071 2.071 2.189 2.465 2.567 2.720 2.815 O Max 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10 .807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421 min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 .126 .187 .291 .350 .502 .518 .581 .644 .707 Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 .205 .285 .417 .476 .626 .705 .831 .957 1.083 S Max 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.50 1.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713 L3 Max 52.35 54.05 56.65 58.15 62.05 63.45 65.00 66.65 68.25 2.061 2.128 2.230 2.289 2.443 2.498 2.559 2.624 2.687 T Max 15.20 18.30 21.50 24.70 28.10 29.60 32.90 36.00 39.50 .598 .720 .846 .972 1.106 1.165 1.295 1.417 1.555 U Max 7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50 .295 .382 .508 .587 .711 .789 .921 1.039 1.161 V Max 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 .500 .500 .500 .500 .500 .500 .500 .500 .500 L4 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 min 3.18 4.75 7.40 8.91 12.72 13.16 14.76 16.36 17.93 .125 .187 .291 .351 .501 .354 .581 .644 .706 Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46 .204 .286 .416 .476 .625 .706 .831 .956 1.081 X Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10 .752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776 Y Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60 .886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874 L5 Max 47.40 50.25 53.40 53.40 56.60 62.95 66.40 69.30 72.60 1.866 1.978 2.102 2.102 2.228 2.478 2.614 2.728 2.858 D Elbow cable clamp 51 O for flange Stainless steel backshells O for flange Backnut 01 Straight cable clamp 02 R W 14 23.82 16 26.97 18 30.18 20 22 33.32 36.53 24 39.67 247 9 8533 Series 239-250_mod:Mise en page 1 24/02/2009 11:16 Page 248 8533 Series Panel cut-out Type 0 shell size Panel cut-out 08 10 12 14 16 18 20 22 24 28 A min 15.80 18.70 23.40 24.90 28.30 31.10 34.50 37.50 40.60 48.00 .622 .736 .921 .980 1.114 1.224 1.358 1.476 1.598 1.890 E 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.92 39.67 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.562 J 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.80 3.80 .126 .126 .126 .126 .126 .126 .126 .126 .150 .150 C Max 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 D Max 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 shell size 08 10 J 16.00 .630 Type 7 H K Max 12 14 16 18 20 22 24 19.17 23.92 25.52 28.70 31.87 .755 .942 1.005 1.130 1.255 35.05 38.22 41.40 1.380 1.505 1.630 15.24 18.41 23.16 24.76 27.94 .600 .725 .912 .975 1.100 30.99 34.16 37.33 40.51 1.220 1.345 1.470 3.18 3.18 3.18 3.18 1.595 3.18 3.18 3.18 3.18 .125 .125 .125 .125 3.18 .125 .125 .125 .125 .125 Dimensions Hermetic receptacle Type 1Y/1YE shell size A Max B Max C Max D Max E Max F Max G Max OJ min 08 1.45 22.05 18.45 14.29 18.12 12.70 26.50 12.96 .057 .868 .726 .563 .713 .500 1.043 .510 10 1.45 22.05 18.45 17.46 21.52 14.25 26.50 14.53 .057 .868 .726 .687 .847 .561 1.043 .572 12 1.45 22.05 18.45 22.22 26.57 19.05 26.50 19.30 .057 .868 .726 .875 1.046 .750 1.043 .760 14 1.45 22.05 18.45 23.81 27.82 20.60 26.50 20.88 .057 .868 .726 .937 1.095 .811 1.043 .822 16 1.45 22.05 18.45 26.99 30.92 23.79 26.50 24.05 .057 .868 .726 1.063 1.217 .937 1.043 .947 18 1.45 22.05 18.45 30.16 34.22 26.95 26.50 27.23 .057 .868 .726 1.187 1.347 1.061 1.043 1.072 20* 1.45 22.05 18.45 33.34 37.22 30.12 26.50 30.40 .057 .868 .726 1.313 1.465 1.186 1.043 1.097 22 1.45 22.05 18.45 36.51 40.62 33.30 26.50 23.58 .057 .868 .726 1.437 1.599 1.311 1.043 .928 24* 1.45 22.05 18.45 39.69 43.62 36.47 26.50 36.70 .057 .868 .726 1.563 1.717 1.436 1.043 1.445 Panel cut-out * Consult us 248 10 8533 Series 239-250_mod:Mise en page 1 24/02/2009 11:16 Page 249 8533 Series Hermetic receptacle type 2Y/2YE Panel cut-out 4 holes OG shell size A Max 08 1.45 .057 12 1.45 .057 1.45 .057 .722 .868 .875 .750 1.043 .118 1.036 .812 .812 .126 .125 .125 .925 14 1.45 18.35 22.05 23.81 20.60 26.50 3.00 28.69 23.01 23.01 3.20 3.18 3.18 25.10 .057 .722 .868 .937 .811 1.043 .118 1.130 .906 .906 .126 .125 .125 .988 16 1.45 18.35 22.05 26.99 23.79 26.50 3.00 31.88 24.61 24.61 3.20 3.18 3.18 28.30 .057 .722 .868 1.063 .937 1.043 .118 1.255 .969 .969 .126 .125 .125 1.114 18 1.45 18.35 22.05 30.16 26.95 26.50 3.00 34.24 26.97 26.97 3.20 3.18 3.18 31.40 .057 .722 .868 1.187 1.061 1.043 .118 1.348 1.062 1.062 .126 .125 .125 1.236 20* 1.45 18.35 22.05 33.34 30.12 26.50 3.00 36.63 29.36 29.36 3.20 3.18 3.18 34.60 .057 .722 .868 1.313 1.186 1.043 .118 1.442 1.156 1.156 .126 .125 .125 1.362 22 1.45 18.35 22.05 36.51 33.30 26.50 3.00 39.80 31.75 31.75 3.20 3.18 3.18 37.80 .057 .722 .868 1.437 1.311 1.043 .118 1.567 1.250 1.250 .126 .125 .125 1.488 24* 1.45 18.35 22.05 39.69 36.47 26.50 3.80 43.38 34.92 34.92 4.00 3.18 3.18 40.90 .057 .722 .868 1.563 1.436 1.043 .150 1.708 1.375 1.375 .157 .125 .125 1.610 10 B Max C Max D Max E Max F Max G Max H Max J Max K L M N Max P min 18.35 22.05 14.29 12.70 26.50 3.00 20.75 15.09 .722 .868 .563 .500 1.043 .118 .817 .594 15.09 3.20 3.18 3.18 15.70 .594 .126 .125 .125 18.35 22.05 17.46 14.25 26.50 3.00 23.95 18.26 .618 18.26 3.20 3.18 3.18 18.90 .722 .868 .687 .561 1.043 .118 .943 .719 .719 .126 .125 .125 .744 18.35 22.05 22.22 19.05 26.50 3.00 26.31 20.62 20.62 3.20 3.18 3.18 23.50 * Not industrialized Hermetic receptacle type 7Y/7YE shell size B Max C Max D Max E Max F Max G Max H J 2.60 26.50 19.52 14.29 27.35 24.85 20.12 15.24 16.00 .102 1.043 .769 .563 1.077 .978 .792 .600 .630 .125 10 2.60 26.50 19.52 17.46 30.24 28.00 24.20 18.41 19.17 3.17 .102 1.043 .769 .687 1.191 1.102 .953 .725 .755 .125 12 2.60 26.50 19.52 22.22 35.01 32.75 28.95 23.16 23.92 3.17 .102 1.043 .769 .875 1.378 1.289 1.140 .912 .942 .125 14 2.60 26.50 19.52 23.81 38.46 35.29 30.30 24.76 25.52 3.17 .102 1.043 .769 .937 1.514 1.389 1.193 .975 1.005 .125 16 2.60 26.50 19.52 26.99 41.64 38.46 33.45 27.94 28.70 3.17 .102 1.043 .769 1.063 1.639 1.514 1.317 1.100 1.130 .125 18 2.60 26.50 19.52 30.16 44.81 41.64 34.64 30.99 31.87 3.17 .102 1.043 .769 1.187 1.764 1.639 1.364 1.220 1.255 .125 20* 3.35 26.50 19.52 33.34 49.60 44.86 39.80 34.16 35.05 3.17 .132 1.043 .769 1.313 1.953 1.766 1.567 1.345 1.380 .125 22 3.35 26.50 19.52 36.51 52.74 49.59 43.00 37.33 38.22 3.17 .132 1.043 .769 1.437 2.076 1.952 1.693 1.470 1.505 .125 24* 3.35 26.50 19.52 39.69 55.40 52.81 46.15 40.51 41.40 3.17 .132 1.043 .769 1.563 2.181 2.079 1.817 1.595 1.630 .125 08 A Max Panel cut-out K Max 3.17 * Not industrialized 249 11 8533 Series 239-250_mod:Mise en page 1 24/02/2009 11:16 Page 250 8533 Series Protective caps cap for plug Aluminum version shells A Max B Max 08 3.20 134.00 .126 5.276 10 3.20 134.00 .126 5.276 12 3.20 134.00 .126 5.276 14 3.20 134.00 .126 5.276 16 3.20 134.00 .126 5.276 18 3.20 134.00 .126 5.276 22 3.20 134.00 .126 5.276 cap for receptacle Protective caps Stainless steel version cap for receptacle Tooling crimping contact sizes wires mm2 0.93 0.60 0.38 0.21 1.91 1.34 0.93 0.60 0.38 3.18 1.91 20 16 12 Insertion and extraction of wired contacts disposable plastic tool : * colored tip for insertion * white tip for extraction Extraction of unwired contacts Filler plug these filler plugs are installed at the rear of unwired contacts to maintain connector sealing AWG 18 20 22 24 14 16 18 20 22 12 14 contact sizes 20 16 12 8365-02 (M22520 / 1-02) or 8476-02 (M22520 / 2-02) 8365 (M 22520 / 1-01) 8365-02 (M 22520 / 1-02) 8365 (M 22520 / 1-01) 8365-02 (M 22520 / 1-02) contact sizes 20 16 12 contact sizes 20 16 12 Two, three or four holes self locking fixing plates, see page 759. 12 colour red blue yellow part numbers 8522-56 8522-57 8522-58 part numbers 8522-389 A*/MS 27488-20 8522-390 A/MS 27488-16 8522-391 A/MS 27488-12 Reusable fixing plate locator 8365 (M 22520 / 1-01) or 8476-01 (M 22520 / 2-01) part numbers (M 81969-14-11) 8522-20 (M 81969-14-03) 8522-16 (M 81969-14-04) 8522-12 * for class 200C only 250 part numbers crimping pliers colour red blue yellow ABS Power Series 251 a 262_typo mod:Mise en page 1 24/02/2009 11:26 Page 251 8533 - ABS Power Series Technical Features And Benefits A unique contact design with a braid socket * Enabling 20 contact points for a size 4 contact vs 2 or 3 for a standard socket, Crimping Bucket Active part * Allowing 20 % more intensity as compared to standard socket, * Excellent vibration withstanding, * Insure excellent crimping (crimping bucket can be heat treated to insure good plasticity without affecting the active part elasticity insuredby the braid - added after heat treatment). Braid : active part of the socket. 20 contact points on the pin for a #4 contact Cut of a contact mated pair A versatile individual sealing on the cable * Sealing on the cable done thanks to a sealing boot, Grommet Cable * Same connector can accomodate a wild range of cable diameter. Sealing boot Thermo plastic insert Longitudinal cut of a connector A contact technology integrated in well proven standard aeromil connectors * Up to 260C service temperature, * Up to 43G vibration withstanding. 251 13 ABS Power Series 251 a 262_typo mod:Mise en page 1 24/02/2009 11:26 Page 252 8533 - ABS Power Series Technical Features Mechanical Environmental * Shell: Aluminum alloy (class R-W), Stainless steel (class E-K), Titanium (Class TT or TF). * Temperature range: - 60C+175C class W, - 60C +200C class R, A and K and TF, - 60C +260C class E and TT. * Plating: Nickel, black anodized, olive green cadmium, passivated, without plating. * Grommet and seal: silicon elastomer. * Insulator: Thermoplastic. * Leakage: low pressure immersion. L 54001 and interfacial sealing: pressure 2 kpa. * Damp Heat: as per EN2997 10 cycles of 24 hours. * Contact body: Copper Alloy. Description * Range extension of the EN2997-ESC 10 standards for High Power Supply - Screw coupling. - Removable crimp contacts for up to 80 Amps (#4). - High vibrations resistant. - High temperature resistant (up to 260C for some layouts). * ABS compliant (ABS 1340-1343, 1426-1427) * Versatile individual sealing on the cable: - Sealing through a sealing boot. - Various range of cable diameter accomodated by the same connector. * Fluid resistant providing maximum protection against fuel, oils, etc. * Contact plating: Gold Over Nickel. * Salt Spray: 48 hours (class A-R-K-E), 500 hours (class W). * Contact retention: #* 4 : 200N, # 6 :156 N * Fire resistance: as per EN 2997 (Class E, K). * Endurance: 500 mating / unmating operation. Resistance to fluid * Vibration & shock: according to EN 2997. Electrical * Dielectric withstanding: Altitude Alt ground 15 000 m 21 000 m 33 000 m Service 1500 Vrms 600 Vrms 400 Vrms 200 Vrms * Insulation Resistance: 5000 Mh under 500 Vdc. * Hermetic and quadrax version available. * Max current rating per contact: # 4 : 80 A. # 6 : 60 A. * Titanium version available for light and robust solutions. * Contact resistance: 1 mh. Applications * Electro mechanical actuator power supply, alternator, starter applications. * Electrical continuity: 5mh with RFI shielding. * Shielding: to 100 MHz at 1 GHz Attenuation >= 65dB. 252 14 MIL-H 5606 - SKYDROL 500 B4-LD4 JP5-MIL-L7870A - MIL L 23699 MIL -L 7808 -MIL C 25769 - MIL- A 8243. ABS Power Series 251 a 262_typo mod:Mise en page 1 24/02/2009 11:26 Page 253 8533 - ABS Power Series 3D view Male Plug with backshell Backshell Grommet Insert Plug body Sealing boot Male contact Interfacial Seal Female receptacle with backshell Backshell Grommet Receptacle body Sealing boot Female contact Insert 253 15 ABS Power Series 251 a 262_typo mod:Mise en page 1 24/02/2009 11:26 Page 254 8533 - ABS Power Series Ordering information Racine / Basic Series 8533 0 R Shell type: 0: Square flange receptacle 3: Plug with RFI shielding 7: Jam nut receptacle Plating (according shell material - see below): Aluminum shell: W: Olive green cadmium 175C R: Nickel 200C A: Black anodized 200C Stainless steel shell: K: Corrosion resistant 200C E: Nickel 260C Titanium shell: TT: Without plating 260C TF: Nickel 200C Hermetics: Y: Shell 20 & 24 S: with 360 teeth Shell size: 18 - 20 - 24 - 28 Contact layout: see table below. Contact type: P: Pin S: Socket Orientation: N - 6 - 7 - 8 - 9 - Y Specification: 109: with contact #4 for cable #6 + sealing boot (layout 24-04) 115: with contact #4 for cable #8 + sealing boot (layout 24-04) 126: with backshell, without contact and sealing boot (layouts 18-02, 20-04, 24-04, 28-06) 136: with contact #6 for cable #6 + sealing boot (layouts 18-02, 20-04, 28-06) 138: with contact #6 for cable #8 + sealing boot (layouts 18-02, 20-04, 28-06) 143: with contact #6 for cable #10/12 + sealing boot (layouts 18-02, 20-04, 28-06) L: without contact and sealing boot 254 16 S 24 04 P N L ABS Power Series 251 a 262_typo mod:Mise en page 1 24/02/2009 11:26 Page 255 8533 - ABS Power Series Layouts 18-02 20-04 24-04 24-03 28-06 2 contacts size 8 Quadrax version only 4 contacts size 6* 4 contacts size 4 3 contacts size 6* Power version only 6 contacts size 6* * Quadrax version available. ABS Cross Reference Circular plug SOURIAU Reference Stainless Steel Aluminium Version 8533 3RS2004PNL Receptacle square Flange ABS Reference SOURIAU Reference ABS1343 C-2004 NF ABS Reference 8533 ORS2004PNL ABS 1426 C-2004 NF 8533 3RS2004PN126 ABS1343 P-2004 NF 8533 ORS2004PN126 ABS 1426 P-2004 NF 8533 3RS2004SNL ABS1343 D-2004 NF 8533 ORS2004SNL ABS 1426 D-2004 NF 8533 3RS2004SN126 ABS1343 S-2004 NF 8533 ORS2004SN126 ABS 1426 S-2004 NF 8533 3RS2404PNL ABS1343 C-2404 NF 8533 ORS2404PNL ABS 1426 C-2404 NF 8533 3RS2404PN126 ABS1343 P-2404 NF 8533 ORS2404PN126 ABS 1426 P-2404 NF 8533 3RS2404SNL ABS1343 D-2404 NF 8533 ORS2404SNL ABS 1426 D-2404 NF 8533 3RS2404SN126 ABS1343 S-2404 NF 8533 ORS2404SN126 ABS 1426 S-2404 NF 8533 3RS2806PNL ABS1343 C-2806 NF 8533 ORS2806PNL ABS 1426 C-2806 NF 8533 3RS2806PN126 ABS1343 P-2806 NF 8533 ORS2806PN126 ABS 1426 P-2806 NF 8533 3RS2806SNL ABS1343 D-2806 NF 8533 ORS2806SNL ABS 1426 D-2806 NF 8533 3RS2806SN126 ABS1343 S-2806 NF 8533 ORS2806SN126 ABS 1426 S-2806 NF 8533 3ES2004PNL ABS1340 C-2004 NF 8533 OES2004PNL ABS 1427 C-2004 NF 8533 3ES2004PN126 ABS1340 P-2004 NF 8533 OES2004PN126 ABS 1427 P-2004 NF 8533 3ES2004SNL ABS1340 D-2004 NF 8533 OES2004SNL ABS 1427 D-2004 NF 8533 3ES2004SN126 ABS1340 S-2004 NF 8533 OES2004SN126 ABS 1427 S-2004 NF 8533 3ES2806PNL ABS1340 C-2806 NF 8533 OES2806PNL ABS 1427 C-2806 NF 8533 3ES2806PN126 ABS1340 P-2806 NF 8533 OES2806PN126 ABS 1427 P-2806 NF 8533 ERS2806SNL ABS1340 D-2806 NF 8533 OES2806SNL ABS 1427 D-2806 NF 8533 3ES2806SN126 ABS1340 S-2806 NF 8533 OES2806SN126 ABS 1427 S-2806 NF 255 17 ABS Power Series 251 a 262_typo mod:Mise en page 1 24/02/2009 11:26 Page 256 8533 Series Dimensions Plug Type 3 ABS 1340 - 1343 Shell size A max B (thread) C max 20 24 28 41,91 47,24 52,00 1-3/16 18 UNEF 2A 1- 7/16 18 UNEF 2A 1-3/4 18 UNEF 2A 34,50 34,50 34,50 Dimensions Receptacle Type 0 ABS 1426 - 1427 Shell size 20 24 28 A max 33,32 39,67 45,99 B max 18,35 18,35 18,35 C max 1,45 1,45 1,45 D max 30,12 36,47 44,41 E max 36,00 36,00 36,00 F max 36,63 43,88 50,83 G 29,36 34,92 39,67 3,10 3,90 3,90 H max Dimensions Receptacle Type 7 Shell size 256 18 20 24 A max 33,32 39,67 B max 19,84 19,84 D min 3,18 3,18 D max 1,57 1,57 E max 36,00 36,00 F max 49,63 55,42 G max 44,86 52,81 ABS Power Series 251 a 262_typo mod:Mise en page 1 24/02/2009 11:26 Page 257 8533 Series Hermetic Jam Nut Receptacle shell size 20 Technical Features Mechanical Electrical * Max current rating: 46 A. * Shell: Stainless steel. * Plating: Passivated. Environmental * Interfacial seal: silicon elastomer. * Temperature range: -65 C + 200 C. * Insulator: Glass. * Leakage rate: 1.10-9. * Contact body: Gold Plated steel. * Salt Spray: 48 h. P/N 8533 7Y 20-04 PN 112 257 19 ABS Power Series 251 a 262_typo mod:Mise en page 1 24/02/2009 11:26 Page 258 8533 Series Hermetic Jam Nut Receptacle shell size 24 Technical Features Mechanical Electrical * Max current rating: 46 A. * Shell: Stainless steel. * Plating: Passivated. Environmental * Interfacial seal: silicon elastomer. * Temperature range: -65 C + 200 C. * Insulator: Glass. * Leakage rate: 1.10-9. * Contact body: Gold Plated steel. * Salt Spray: 48 h. P/N 8533 7Y 24-03 PN 112 258 20 ABS Power Series 251 a 262_typo mod:Mise en page 1 24/02/2009 11:27 Page 259 8533 Series Strain relief Backshell ABS 1452 Layout code Souriau Ref. ABS Ref. 20-04 Alu 8533 8250 20-04 Stainless Steel 85338281 24-04 Alu 8533 8223 ABS 1452 A 2404 24-04 Stainless Steel Consult us ABS 1452 C 2404 28-06 Alu 8533 8245 ABS 1452 A 2806 28-06 Stainless Steel 85338288 OA OB 0.05 0.1 OC Max OL OL1 0.05 1.20 OL2 W 1 0.12 Number of holes Thread Class 2B Mass (g) ABS 1452 A 2004 22.94 27.72 30.12 24.1 41.78 38.28 33.21 4 1.1875-18 UNEF 73 4 1.7/16/18 UNEF 95 6 1.750018UNS 116 ABS 1452 C 2004 29.8 33.71 38 31.2 48.8 46.28 45 34.74 39.7 44.4 37.7 41.78 38.28 47.49 ABS 1452 C 2806 259 21 ABS Power Series 251 a 262_typo mod:Mise en page 1 24/02/2009 11:27 Page 260 8533 Series Contacts Socket contact ABS 1344 Socket contact ABS 1403 Cable Contact Contact size type Dimensions Souriau reference ABS reference Conductor size (mm2) AWG Material L Max (mm) D Max (mm) 4 MALE 8533-8202 ABS 1403 104KZ06 9 & 14 8&6 Copper 14,55 5,74 4 MALE 8533-8201 ABS 1403 104KZ04 22 4 Copper 14,55 5,74 4 FEMALE 8533-8171 ABS 1344 104LZ06 9 & 14 8&6 Copper 11,15 9,6 4 FEMALE 8533-8120 ABS 1344 104LZ04 22 4 Copper 11,15 9,6 6 MALE 8533-8246 ABS 1403 1K6LZ06 14 6 Copper 13,7 4,59 6 MALE 8533-8272 ABS 1403 1K6LZ08 9 8 Copper 13,7 4,59 6 MALE 8533-8248 ABS 1403 1K6LZ10 5&3 10 & 12 Copper 13,7 4,59 6 FEMALE 8533-8247 ABS 1344 1K6LZ06 14 6 Copper 15,3 7,33 6 FEMALE 8533-8273 ABS 1344 1K6LZ08 9 8 Copper 15,3 7,33 6 FEMALE 8533-8249 ABS 1344 1K6LZ10 5&3 10 & 12 Copper 15,3 7,33 Sealing boot ABS 0992 SOURIAU ABS SOURIAU ABS Contact Cable Cable part Number part Number part Number part Number size AWG material Class 200 C Class 200 C Class 260 C Class 260 C A B #6 6 Copper 8533-8296 ABS0992-A 03 8533-8308 Consult us 3.30 to 4.83 13 max #6 8 Copper 8533-8236 ABS0992-A 05 8533-8307 Consult us 3.30 to 4.83 13 max #6 10 to 12 Copper 8533-8287 ABS0992-A 02 8533-8306 Consult us 3.30 to 4.83 13 max #6 quad Copper ABS0973 / 0974 8533-8236 ABS0992-A 01 3.30 to 4.83 13 max #4 4 Copper 8599-4591 ABS0992C04 Consult us Consult us 3.30 to 4.83 230.005 #4 6 Copper 8533-8163 ABS0992C05 Consult us Consult us 3.30 to 4.83 230.005 #4 8 Copper 8533-8163 ABS0992C05 Consult us Consult us 3.30 to 4.83 230.005 10 to 12 Copper 8533-8262 Consult us Consult us 3.30 to 4.83 230.005 8533-8253 ASNE0616BC0400 ASNE0616BB0400 Consult us Consult us 3.30 to 4.83 230.005 #4 Filler plug #4 4 Blue PTFE 260 22 ABS Power Series 251 a 262_typo mod:Mise en page 1 24/02/2009 11:27 Page 261 8533 Series Tooling Contact Contact size type Contact reference Cable Conductor AWG size (mm2) Crimping tool Cable material Die*set Pneumatic 4 MALE 8533-8202 9 & 14 8&6 Copper M22520/23-01 M22520/23-02 4 MALE 8533-8201 22 4 Copper M22520/23-01 M22520/23-04 4 FEMALE 8533-8171 9 & 14 8&6 Copper M22520/23-01 M22520/23-02 4 FEMALE 8533-8120 22 4 Copper M22520/23-01 M22520/23-04 Sealing boot Locator extraction tool 8533-8193 8533-8141 8533-8193 8533-8193 8533-8141 8533-8193 6 MALE 8533-8246 14 6 Copper M22520/23-01 M22520/23-03 8530-1603 6 MALE 8533-8272 9 8 Copper M22520/23-01 M22520/23-02 8530-1603 6 MALE 8533-8248 5&3 10 & 12 Copper M22520/23-01 WA23-112DA 8530-1603 6 FEMALE 8533-8247 14 6 Copper M22520/23-01 M22520/23-03 8530-1603 6 FEMALE 8533-8273 9 8 Copper M22520/23-01 M22520/23-02 8530-1603 6 FEMALE 5&3 10 & 12 Copper M22520/23-01 WA23-112DA 8530-1603 8533-8249 Pneumatic tool Crimping tool (M 22520/23-01) Die Set (M 22520/23-02) Locator (M 22520/23-11) Extraction tool Contact Size 06 04 Material Part number Plastic M 811969/14-06 (red) Metallic 860-197 Plastic Metallic M 811969/14-07 (blue) 8533-8175 Plastic extraction tool Metallic extraction tool 261 23 891-2 Series 270-280_typo_mod:Mise en page 1 24/02/2009 11:42 Page 270 891/2 Series Description Applications * Screw coupling * High temperature connector for severe environment * Fire resistant and fire wall * High level of shock and vibration * Thermocouple contacts available except hermetic class * Stainless steel shells * Hermetic version available with male contacts only Aircraft engines High temperature applications Standards MIL-C 5015 G, class K NFL 54140 Characteristics Electrical Mechanical Maximum current rating per contact : All 89 series connectors listed below are interchangeable and intermateable with other connectors conforming to MIL-C-5015G, class K. connector series temperature range fire-proof with self-locking number of operations thread plating interfacial sealing standard 891 standard 892 892-04 (ESC.004) special 891* -55 +200C -55 +260C -55 +260C yes yes yes yes yes yes 500 500 500 on plug on plug on plug yes yes no -55 +200C yes no 3000 yes special 892* -55 +260C yes no 3000 plug and receptacle plug and receptacle yes 16 temperature (Max.) 20C 175C 260C 020 10 007.5 12 035 19 13 04 110 55 39 contact size Dielectric withstanding voltage : service at ground level at 21,000 meters (approx. 69.000 feet) inst 1000 Vrms 260 Vrms A 2000 Vrms 360 Vrms Firewall and fireproof tests D 2800 Vrms 400 Vrms 891, 892 and 892.04 (ESC.004) series, comply with the following specifications : NF 54140, AIR 8467, test 14 MIL-C 5015G class K - 4.3.20 - 4.6.16 ESC 00015 and ESC 00024 E 3500 Vrms 440 Vrms * Only available on special request Insulation resistance (at 500 Vdc) : at normal temperature . . . . . . . . . . . . . . . 5000 M Ordering information : 891/2 connectors without backfittings 891/2 hermetic connectors 89 basic series sub series shell style class shell size contact layouts contacts 1 - 00 1 - 200C 2 - 260C -- 00 02 07 06 26 -- 01 02 05 - standard connector square flange receptacle with thread for backfittings square flange receptacle without thread for backfittings jam nut receptacle (on request) plug without self-locking plug with self-locking hermetic connectors solder fixing receptacle square flange receptacle large flange, solder fixing receptacle K - fire resistant (standard) H - hermetic - 10SL, 12S, 14S, 16S, 16, 18, 20, 22, 24 or 28 - see table p 274 P - male S - female polarization N (normal), W, X, Y, Z - see table p 275 L - connector without contacts 270 24 K -16S- 8 - S - N - L 891-2 Series 270-280_typo_mod:Mise en page 1 24/02/2009 11:42 Page 271 891/2 Series 891/2 connectors with backfittings 89 basic series sub series shell style type of backfitting 1 - 200C 1 - 26 2 - 260C 00 07 26 06 - square flange receptacle jam nut receptacle (on request) plug with self-locking plug without self-locking A C E F - straight adapter (8590AXX type) elbow adapter (on request) (ESC 87 type) simple backnut (may be fitted onto A or C)*(8950 EXX type) cable clamp (may be fitted onto A or C)*(ESC 86 XX) shell size - 10SL, 12S, 14S, 16S, 16, 18, 20, 22, 24 or 28 contact layouts - see table p 274 contacts P - male polarization N (normal), W, X, Y, Z - see table p 275 L F - 22 - 14 - P - N - L S - female connectors without contacts 892 suffix 04 connectors with backfittings (including types corresponding to ESC & PAN nos.) 89 basic series sub series shell style type of backfitting 2 - 26 - E - 24 - 28 - P - N - 04 00 - square flange receptacle 26 - self-locking plug K A C E F - no backfitting with straight adapter (8590AXX type) with elbow adapter (on request) (ESC 87 type) with simple backnut (8950 EXX type) with cable clamp (ESC 86 XX) shell size - 10SL, 12S, 14S, 16S, 16, 18, 20, 22, 24 or 28 contact layouts - see table p 274 (note : some arrangements are not included in Rolls-Royce JDS 1371 spec.) contacts polarization L 2 - 260C P - male S - female N (normal), W, X, Y, Z - see table p 275 04 - compulsory digits - ESC.004 specification - connectors supplied without contacts (compulsory) As above but Rolls-Royce ESC part nos. ESC. 004- K - O - 24 - 28 - P - N Rolls-Royce connector specifications specification number shell style A - square flange receptacle K - self-locking plug type of backfitting O - no backfitting shell size - 10SL, 12S, 14S, 16S, 16, 18, 20, 22, 24 or 28 contact layouts - see table p 274 (note : some arrangements are not included in Rolls-Royce JDS 1371 spec.) contacts P - male polarization N (normal), W, X, Y, Z - see table p 275 S - female Note : contacts are not supplied with these connectors 271 25 891-2 Series 270-280_typo_mod:Mise en page 1 24/02/2009 11:42 Page 272 891/2 Series Part number cross reference tables Souriau 891 (200C) series/MIL-C 5015G classes KS & HS MIL-C 83723 Series II Plugs/receptacles with contacts description square flange receptacle plug without self locking plug with self locking jam nut receptacle square flange receptacle Souriau part number MIL-C 5015G class KS 891.00K............ P 891.00K............ S 891.06K............ P 891.06K............ S 891.26K............ P 891.26K............ S 891.07K............ P 891.07K............ S 891.02K............ P 891.02K............ S MS3450 KS............. P MS3450 KS............. S MS3456 KS............. P MS3456 KS............. S MS3459 KS............. P MS3459 KS............. S Contacts description pin. 16.16 pin. 12.12 pin. 4.4 socket 16S.16 short socket 16.16 long socket 12.12 socket 4.4 Souriau part number 8950.4100B 8950.4107B 8950.4112B 8950.4101C 8950.4105C 8950.4108B 8950.4113B Hermetic receptacles description solder mounting square flange receptacle solder mounting Souriau part number MIL-C 5015G class HS 891.01H............... P 891.02H............... P 891.05H............... P MS 3142 HS....C ....P MS 3143 HS....C ....P Souriau 892 (260C) series / MIL-C 5015G classes KS & HS Plugs/receptacles with contacts description square flange receptacle plug without self locking plug with self locking jam nut receptacle square flange receptacle Souriau part number MIL-C 5015G class KS 892.00 K .......... P 892.00 K .......... S 892.06 K .......... P 892.06 K .......... S 892.26 K .......... P 892.26 K .......... S 892.07 K .......... P 892.07 K .......... S 892.02 K .......... P 892.02 K .......... S MS 3450 KS ...... P MS 3450 KS ...... S MS 3456 KS ...... P MS 3456 KS ...... S MS 3459 KS ...... P MS 3459 KS ...... S Hermetic receptacles description solder mounting square flange receptacle solder mounting Souriau part number MIL-C-5015G class HS 892.01 H................ P 892.02 H................ P 892.05 H................ P MS 3142 HS ...C ...P MS 3143 HS ...C ...P Accessories description size 16 sealing plugs size 12 sealing plugs size 4 sealing plugs size 16 insertion/extraction tool size 12 insertion/extraction tool size 4 extraction tool Souriau part number MIL-C-5015G 8522.390A 8522.391A 8950.4152 8522.16 8522.12 8950.4004 MS 3187.16.2 MS 3187.12.2 MS 3187.4.2 MS 3447.16 MS 3447.12 MS 3165.4 272 26 891-2 Series 270-280_typo_mod:Mise en page 1 24/02/2009 11:42 Page 273 891/2 Series Souriau 891 (200C) series / NFL 54140 class 1 (France) 892 (260C) series / NFL 54140 class 2 (France) Plugs/receptacles with contacts description square flange receptacle plug without self locking jam nut receptacle Souriau part number NFL 54140 891 00 .................. 2 892 00 .................. 2 891 06 .................. 2 892 06 .................. 2 891 07 .................. 2 892 07 .................. 2 91 00 ................. 2 92 00 ................. 2 91 06 ................. 2 92 06 ................. 2 91 07 ................. 2 92 07 ................. 2 Backfittings description Souriau part number back nut straight adapter cable clamp NFL 54140 8950 E ............ 8950 A ............ 8950 F ............ 9R .............. 9RA ............ 9RC ............ Souriau 892 suffix 04(260C) series / ESC.004 (Rolls-Royce) PAN 6434 (Panavia) Plugs/receptacles without contacts description square flange receptacle plug with self locking hermetic receptacle/solder flange *on request Souriau part number PAN 6434 892.00K ........... 04L 892.26K ........... 04L 892.05H ........... 04* ESC.004 ESC.004 AO ........... ESC.004 KO ........... ESC.004 CO ........... Receptacles/plugs with end fittings, without contacts description Souriau part number PAN 6434 ESC.004 square flange receptacle with backnut square flange receptacle with cable clamp square flange receptacle with straight adapter plug with straight adapter plug with cable clamp plug with elbow adapter *on request 892.00E ........... 04L 892.00F ........... 04L 892.00A ........... 04L 892.26A ........... 04L 892.26F ........... 04L 892.26C ........... 04L* PAN 6434 CG ........... PAN 6434 CA ........... PAN 6434 CB ........... PAN 6434 DB ........... PAN 6434 DA ........... PAN 6434 DE ........... ESC.004 AA ........... ESC.004 AB ........... ESC.004 AD ........... ESC.004 KD ........... ESC.004 KB ........... ESC.004 KE ........... Souriau part number PAN 6434 Backfittings description back nut cable clamp straight adapter elbow adapter 8950.E ................ 8950.F ................ 8950.A ................ 8950.C ................* ESC.004 ESC.004 OA .................. ESC.004 OB .................. ESC.004 OD .................. ESC.004 OE .................. *on request Contacts description pin, standard, 16.16 pin, standard, 16.24 pin, alumel, 16.16 pin, chromel,16.16 socket, standard, short 16.16 socket, standard, short 16.24 socket, standard, long 16.16 socket, standard, long 16.24 socket, alumel, short, 16.16 socket, alumel, long, 16.16 socket, chromel, short 16.16 socket, chromel, long 16.16 Souriau part number PAN 6434 8950-5049A 900 8950-5048A 900 8950-5149 8950-5143 8950-5052A 900 8950-5050A 900 8950-5053A 900 8950-5051A 900 8950-5151 8950-5153 8950-5145 8950-5147 900 PAN 6434 PA PAN 6434 PB PAN 6434 SD PAN 6434 SE PAN 6434 SF PAN 6434 SG ESC.004 ESC.007 PB 16 ESC.007 PA 16 ESC.007 PB 16A ESC.007 PB 16C ESC.007 SB 16S ESC.007 SA 16S ESC.007 SB 16L ESC.007 SA 16L ESC.007 SB 16SA ESC.007 SB 16LA ESC.007 SB 16SC ESC.007 SB 16LC 273 27 891-2 Series 270-280_typo_mod:Mise en page 1 24/02/2009 11:42 Page 274 891/2 Series Contact layouts 10SL 12S 10SL.3 3#16 10SL.4* 2#16 12S.3 14S 2#16 4#16 16.S1 7#16 14S.5 5#16 16.S8* 5#16 14S.6 6#16 6#16 3#12 20.27 20.29 22.14 16.11 18 2#12 18.1 10#16 18.5* 1#16 2#12 18.11 5#12 3#16 22 20.18* 16 14S.2 14S.7 20 16S 24 19#16 24.28 28 28.12* 26#16 14#16 28.21 37#16 17#16 28.22 * these arrangements not available with ESC.004 (FCI Souriau 892 suffix 04) part numbers 274 28 24#16 these arrangements are available in hermetic receptacles 3#16 3#40 891-2 Series 270-280_typo_mod:Mise en page 1 24/02/2009 11:42 Page 275 891/2 Series Polarization N orientation in degrees W X Y 10SL.3 10SL.4 12S.3 14S.2 14S.5 14S.6 14S.7 16S.1 16S.8 16.11 18.1 18.11 20.18 20.27 20.29 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 70 90 80 35 70 35 35 80 22 22.14 0 80 - - 280 24 24.28 0 80 110 250 280 28 28.12 28.21 28.22 0 0 0 90 80 70 180 110 145 270 250 215 280 290 shell size N 10SL 12S 14S Z 16S W 16 18 Y 20 X contact arrangement 145 120 110 180 170 110 145 170 110 110 - Z 215 240 270 265 250 215 265 250 250 - 290 280 325 290 325 325 280 Standard and thermocouple contacts (with colour bands) Standard contacts contact type size wire size 16 16 16 12 12 4 4 16-20 16-20 16-20 12-14 12-14 4-6 4-6 pin short socket long socket pin socket pin socket 891 (200C) series part n col. bands 8950-4773A 8950-4778 8950-4779 8950-4774 8950-4781 8950-4775 8950-4783 892 (260C) series part n col. bands blue/blue blue/blue blue/blue - 8950-4773A 8950-4778 8950-4779 8950-4774 8950-4781 8950-4775 8950-4783 blue/blue blue/blue blue/blue - 892.04 (ESC) series part n col. bands 8950-5049A 8950-5052A 8950-5053A - blue/blue blue/blue blue/blue - Contacts with reduced barrels contact type size wire size 16 16 16 20-24 20-24 20-24 pin short socket long socket Special contacts contact type pin short socket long socket 891 (200C) series part n col. bands 8950-5833 8950-5835 8950-5838 892 (260C) series part n col. bands - 8950-5833 8950-5835 8950-5838 - 892.04 (ESC) series part n col. bands 8950-5048A 8950-5050A 8950-5051A blue/green blue/green blue/green (long barrel with external cable dia. 3.3 mm) size wire size 16 16 16 16-20 16-20 16-20 891 (200C) series part n col. bands 8950-5049A 8950-5052A 8950-5053A 892 (260C) series part n col. bands blue/blue blue/blue blue/blue 8950-5049A 8950-5052A 8950-5053A blue/blue blue/blue blue/blue 892.04 (ESC) series part n col. bands - - Thermocouple alumel contacts contact type pin short socket long socket pin short socket long socket size wire size 16 16 16 16 16 16 16-20 16-20 16-20 20-24 20-24 20-24 891 (200C) series part n col. dot 8950-4122 8950-4123B 8950-4128B 8950-5843 8950-5849 8950-5851 892 (260C) series part n col. dot black black black black black black 8950-4122 8950-4123B 8950-4128B 8950-5843 8950-5849 8950-5851 black black black black black black 892.04 (ESC) series part n col. bands 8950-5149 8950-5151 8950-5153 - - Thermocouple chromel contacts contact type pin short socket long socket pin short socket long socket size wire size 16 16 16 16 16 16 16-20 16-20 16-20 20-24 20-24 20-24 891 (200C) series part n col. dot 8950-4132 8950-4133B 8950-4138B 8950-5841 8950-5845 8950-5847 892 (260C) series part n col. dot yellow yellow yellow yellow yellow yellow 8950-4132 8950-4133B 8950-4138B 8950-5841 8950-5845 8950-5847 yellow yellow yellow yellow yellow yellow 892.04 (ESC) series part n col. bands 8950-5143 8950-5145 8950-5147 - - 275 29 891-2 Series 270-280_typo_mod:Mise en page 1 24/02/2009 11:42 Page 276 891/2 Series Dimensions M Plugs - type 06 and type 26 thread V shell size L M 10SL 39.65 23.50 1.56 0.93 12S 39.65 25.50 1.56 1.00 14S 39.65 28.00 1.56 1.10 16S 39.65 31.90 1.56 1.26 16 44.15 31.90 1.74 1.26 18 44.15 34.00 1.74 1.34 20 44.15 37.50 1.74 1.48 22 44.15 40.60 1.74 1.60 24 44.15 43.80 1.74 1.72 28 44.15 50.00 1.74 1.97 L V 5 8 / "-24 UNEF.2A 3/4" -20 UNEF.2A 7/8" -20 UNEF.2A 7/8" -20 UNEF.2A 1"-20 UNEF.2A 3/16" -18 1 UNEF.2A 11/4"-18 UNEF.2A 17/16"-18 UNEF.2A 15/8"-18 UNEF.2A : 5/8" - 24 UNEF.2A for all types except Rolls-Royce ESC.004 connectors which have an 11/16" - 24 UNEF.2A thread Square flange receptacles - type 00 K K L M N R S T 10SL 1.60 39.65 14.90 15.84 18.25 25.25 3.80 .06 1.56 .59 .62 .72 .99 .15 12S 1.60 39.65 14.90 19.02 20.60 27.60 3.80 .06 1.56 .59 .75 .81 1.09 .15 14S 1.60 39.65 14.90 22.19 23.00 30.00 3.80 .06 1.56 .59 .87 .91 1.18 .15 16S 1.60 39.65 14.90 25.40 24.60 32.62 3.80 .06 1.56 .59 1.00 .97 1.28 .15 16 1.60 44.15 19.65 25.40 24.60 32.62 3.80 .06 1.74 .77 1.00 .97 1.28 .15 18 1.60 44.15 19.65 28.50 26.97 35.00 4.60 .06 1.74 .77 1.12 1.06 1.38 .18 UNEF.2A 20 2.00 44.15 19.65 31.70 29.40 37.40 4.60 13/16"-18 .08 1.74 .77 1.25 1.16 1.47 .18 UNEF.2A 22 2.00 44.15 19.65 34.88 31.75 40.80 4.60 11/4"-18 .08 1.74 .77 1.37 1.25 1.61 .18 UNEF.2A 24 2.00 44.15 20.65 38.05 34.90 43.90 4.60 17/16"-18 .08 1.74 .81 1.50 1.37 1.73 .18 UNEF.2A 28 2.00 44.15 20.65 44.40 39.65 50.65 4.60 15/8" -18 .08 1.74 .81 1.75 1.56 1.99 .18 UNEF.2A 4 holes OT S ON M shell size L Thread V R / "-24 UNEF.2A 3 4 / "-20 UNEF.2A 7 8 / "-20 UNEF.2A 7 8 / " -20 UNEF.2A 1"-20 : 5/8" - 24 NEF.2A for all types except Rolls-Royce ESC.004 connectors which have an 11/16" - 24 NEF.2A thread Panel cut-out B rear of panel B C E Max A 10SL 20.50 18.25 3.80 10.00 17.00 18.25 3.80 .81 .72 .15 .39 .67 .72 .15 .24 12S 20.50 20.60 3.80 10.00 20.20 20.60 3.80 6.0 .81 .81 .15 .39 .79 .81 .15 .24 14S 23.50 23.00 3.80 10.00 23.40 23.00 3.80 6.0 .93 .91 .15 .39 .92 .91 .15 .24 16S 26.50 24.60 3.80 10.00 26.60 24.60 3.80 6.0 1.04 .97 .15 .39 1.05 .97 .15 .24 16 26.50 24.60 3.80 10.00 26.60 24.60 3.80 5.30 1.04 .97 .15 .39 1.05 .97 .15 .21 18 29.80 27.00 4.60 10.00 29.70 27.00 4.60 5.30 1.17 1.06 .18 .39 1.17 1.06 .18 .21 20 34.60 29.40 4.60 10.00 32.90 29.40 4.60 5.30 1.36 1.16 .18 .39 1.29 1.16 .18 22 36.20 31.75 4.60 10.00 36.10 31.75 4.60 1.43 1.25 .18 .39 1.42 1.25 .18 24 41.10 34.90 4.60 10.00 39.30 34.90 4.60 1.62 1.37 .18 .39 1.55 1.37 .18 28 46.30 39.65 4.60 10.00 45.60 39.65 4.60 5.30 1.82 1.56 .18 .39 1.79 1.56 .18 .21 E A D front of panel B C D Max shell size O B V 5 8 panel 4 holes OC 276 30 A 6.0 .21 5.30 .21 5.30 .21 891-2 Series 270-280_typo_mod:Mise en page 1 24/02/2009 11:42 Page 277 891/2 Series Jam nut receptacles - type 07 shell size L K ON M Thread V OT OS K L M N S T 10SL 2.00 32.00 22.30 15.84 26.00 20.00 12S 2.00 3200 22.30 19.02 29.00 23.00 14S 2.00 32.00 22.30 22.19 32.50 26.97 16S 2.00 32.00 22.30 25.40 36.50 30.17 16 2.00 36.50 26.60 25.40 36.50 30.17 18 2.20 36.50 26.60 28.50 39.00 33.32 1.31 UNEF.2A 20 2.20 36.50 26.60 31.70 44.00 36.52 13/16"-18 22 2.20 36.50 26.60 34.88 47.20 39.67 1.56 UNEF.2A 24 2.20 36.50 26.60 38.05 50.50 42.87 17/16"-18 28 2.20 36.50 26.60 44.40 57.00 50.00 .08 1.26 .08 .88 1.26 .08 1.26 .08 .09 .09 .09 .09 1.73 1.37 1.05 1.44 1.54 1.25 1.05 1.44 1.44 1.12 1.05 1.44 1.44 1.00 1.05 1.44 .09 1.28 1.00 1.05 1.44 1.14 .87 .88 1.44 1.02 .75 .88 1.26 .08 .62 .88 1.86 1.50 1.05 1.99 1.75 2.24 Panel cut-out shell size C B C D Max D min 10SL 19.00 1.80 10.50 1.50 12S 20.20 22.20 1.80 10.50 1.50 14S 23.40 25.40 1.80 10.50 1.50 16S 26.60 28.60 1.80 10.50 1.50 16 26.60 28.60 1.80 9.30 1.50 18 29.70 31.70 1.80 9.30 1.50 20 32.90 34.90 1.80 9.30 1.50 22 36.10 38.10 1.80 9.30 1.50 24 39.30 40.30 1.80 9.30 1.50 28 45.60 47.60 1.80 9.30 1.50 O A B D A 17.00 .67 .75 .79 .07 .87 .92 .07 1.00 1.05 1.17 1.29 1.42 1.50 1.55 1.59 1.79 1.19 1.19 1.44 1.69 1.97 UNEF.2A 7 8 / "-24 UNEF.2A 7 8 / "-20 UNEF.2A 1"-20 UNEF.2A 11/4"-18 UNEF.2A 15/8"-18 UNEF.2A : 5/8" - 24 UNEF.2A for all types except Rolls-Royce ESC.004 connectors which have an 11/16" - 24 UNEF.2A thread .06 .37 .07 1.06 / "-20 .06 .37 .07 1.87 3 4 .06 .37 .07 UNEF.2A .91 .06 .37 .07 .79 / "-24 .06 .37 .07 1.37 .06 .41 .07 1.25 .06 .41 .07 1.13 .06 .41 .07 1.13 1.05 .41 V 5 8 .06 .37 .06 Square flange receptacles - type 02 M 4 holes OT W S R ON K shell size K L M N R S T W 10SL 1.60 32.00 14.90 15.84 18.25 25.25 3.80 14.50 12S 1.60 32.00 14.90 19.02 20.60 27.60 3.80 14.50 14S 1.60 32.00 14.90 22.19 23.00 30.00 3.80 17.40 16S 1.60 32.00 14.90 25.40 24.60 32.62 3.80 20.65 16 1.60 36.50 19.65 25.40 24.60 32.62 3.80 20.65 18 1.60 36.50 19.65 28.50 26.97 35.00 4.60 23.70 20 2.00 36.50 19.65 31.70 29.40 37.40 4.60 28.15 22 2.00 36.50 19.65 34.88 31.75 40.80 4.60 29.95 24 2.00 36.50 20.65 38.05 34.90 43.90 4.60 33.25 28 2.00 36.50 20.65 44.40 39.65 50.65 4.60 39.40 rear of panel B C E Max L R .06 .06 .06 .06 .06 .06 .08 .08 .08 .08 1.26 1.26 1.26 1.26 1.44 1.44 1.44 1.44 1.44 1.44 .59 .59 .59 .59 .77 .77 .77 .77 .81 .81 .62 .75 .87 1.00 1.00 1.12 1.25 1.37 1.50 1.75 .72 .81 .91 .97 .97 1.06 1.16 1.25 1.37 1.56 .99 1.09 1.18 1.28 1.28 1.38 1.47 1.61 1.73 1.99 .15 .15 .15 .15 .15 .18 .18 .18 .18 .18 .57 .57 .69 .81 .81 .93 1.11 1.18 1.31 1.55 Panel cut-out shell size B O A E panel 4 holes OC front of panel B C D Max A 10SL 20.50 .81 20.50 12S 18.25 3.80 10.00 17.00 18.25 3.80 6.0 20.60 3.80 10.00 20.20 20.60 3.80 6.0 14S 23.50 23.00 3.80 10.00 23.40 23.00 3.80 6.0 16S 26.50 24.60 3.80 10.00 26.60 24.60 3.80 6.0 16 26.50 24.60 3.80 10.00 26.60 24.60 3.80 5.30 18 29.80 27.00 4.60 10.00 29.70 27.00 4.60 5.30 20 34.60 29.40 4.60 10.00 32.90 29.40 4.60 5.30 22 36.20 31.75 4.60 10.00 36.10 31.75 4.60 5.30 24 41.10 34.90 4.60 10.00 39.30 34.90 4.60 5.30 28 46.30 39.65 4.60 10.00 45.60 39.65 4.60 5.30 .81 D B A .93 1.04 1.04 1.17 1.36 1.43 1.62 1.82 .72 .81 .91 .97 .97 1.06 1.16 1.25 1.37 1.56 .15 .15 .15 .15 .15 .18 .18 .18 .18 .18 .39 .39 .39 .39 .39 .39 .39 .39 .39 .39 .67 .79 .92 1.05 1.05 1.17 1.29 1.42 1.55 1.79 .72 .81 .91 .97 .97 1.06 1.16 1.25 1.37 1.56 .15 .15 .15 .15 .15 .18 .18 .18 .18 .18 .24 .24 .24 .24 .21 .21 .21 .21 .21 .21 277 31 891-2 Series 270-280_typo_mod:Mise en page 1 24/02/2009 11:42 Page 278 891/2 Series Hermetic solder fixing recep. type 01H ON OR K OQ M L S shell size K L 10SL 1.60 20.40 .06 .80 .65 .62 .62 .50 1.15 12S 1.60 20.40 16.55 19.02 19.02 16.70 29.20 .06 .80 .65 .75 .75 .66 1.15 14S 1.60 20.40 16.55 22.19 22.19 18.30 29.20 .06 .80 .65 .87 .87 .72 1.15 16S 1.60 20.40 16.55 25.40 25.40 21.40 29.20 .06 .80 .65 1.00 1.0 .84 1.15 18 2.00 25.15 20.65 28.50 28.50 24.70 33.70 .08 .99 .81 1.12 1.12 0.97 1.32 20 2.00 25.15 21.05 31.70 32.50 29.40 33.70 .08 .99 .83 1.25 1.25 1.15 1.32 28 2.00 25.15 21.05 44.40 44.40 41.30 33.70 .08 .99 .83 1.74 1.74 1.62 1.32 M N 16.55 Q 15.84 15.84 R S 12.70 29.20 Panel cut-out shell size 10SL 13.20 12S 17.20 14S 18.80 16S 21.90 18 25.20 20 29.90 28 41.80 solder .52 .68 .74 .86 O A A .99 1.18 1.65 Hermetic square flange recep. type 02H K L Q S 4 holes OT (see table page 251) OR ON M S shell size K L M N Q R S V 10SL 1.60 20.40 16.55 15.84 25.25 12.70 18.25 29.20 .06 .80 .65 .62 .99 .50 .72 1.15 12S 1.60 20.40 16.55 19.02 27.60 16.70 20.60 29.20 .06 .80 .65 .75 1.08 .66 .81 1.15 14S 1.60 20.40 16.55 22.19 30.00 18.30 23.00 29.20 .06 .80 .65 .87 1.18 .72 .91 1.15 16S 1.60 20.40 16.55 25.40 32.60 21.40 24.60 29.20 .06 .80 .65 1.00 1.28 .84 .97 1.15 18 2.00 25.15 20.65 28.50 35.00 24.70 26.97 33.70 .08 .99 .81 1.12 1.38 .97 1.06 1.32 20 2.00 25.15 21.05 31.70 37.40 29.40 29.40 33.70 .08 .99 .83 1.25 1.47 1.15 1.16 1.35 28 2.00 25.15 21.05 44.40 50.65 41.30 39.65 33.70 .08 .99 .83 1.74 1.99 1.62 1.56 1.32 V Panel cut-out shell size A D 4 holes 278 32 A rear of panel B C D Max 13.20 18.25 3.80 17.00 18.25 3.80 .52 .72 .15 .67 .72 .15 .24 12S 17.20 20.60 3.80 20.20 20.60 3.80 6.00 .68 .81 .15 .79 .81 .15 .24 14S 18.80 23.00 3.80 23.40 23.00 3.80 6.00 .74 .91 .15 .92 .91 .15 .24 16S 21.90 24.60 3.80 26.60 24.60 3.80 6.00 .86 .97 .15 1.05 .97 .15 .24 18 25.20 27.00 4.60 29.70 27.00 4.60 5.30 .99 1.06 .18 1.17 1.06 .18 .21 20 29.90 29.40 4.60 32.90 29.40 4.60 5.30 1.18 1.16 .18 1.29 1.16 .18 .21 28 41.80 39.65 4.60 45.60 39.65 4.60 5.30 1.65 1.56 .18 1.79 1.56 .18 .21 O B OC front of panel B C 10SL B panel A 6.00 891-2 Series 270-280_typo_mod:Mise en page 1 24/02/2009 11:42 Page 279 891/2 Series Hermetic solder fixing recep. type 05H M OR OQ ON K L S shell size K L 10SL 1.60 20.40 .06 .80 .65 .62 .86 .50 1.15 12S 1.60 20.40 16.55 19.02 25.15 16.70 29.20 .06 .80 .65 .75 .99 .66 1.15 14S 1.60 20.40 16.55 22.19 28.35 18.30 29.20 .06 .80 .65 .87 1.11 .72 1.15 16S 1.60 20.40 16.55 25.40 31.50 21.40 29.20 .06 .80 .65 1.00 1.24 .84 1.15 18 2.00 25.15 20.65 28.50 34.65 24.70 33.70 .08 .99 .81 1.12 1.36 .97 1.32 20 2.00 25.15 21.05 31.70 37.85 29.40 33.70 .08 .99 .83 1.25 1.49 1.15 1.32 28 2.00 25.15 21.05 44.40 50.55 41.30 33.70 .08 .99 .83 1.74 1.99 1.62 1.32 M N 16.55 15.84 Q 22.00 R S 12.70 29.20 Panel cut-out shell size O A Solder A 10SL 13.20 12S 17.20 14S 18.20 16S 21.90 18 25.20 20 29.90 28 41.80 .52 .68 .74 .86 .99 1.18 1.65 Simple backnuts shell size part number B Max C 8950-E-12 13.00 19.20 11.60 14 8950-E-14 13.00 22.20 14.40 16 8950-E-16 13.00 25.20 16.70 18 8950-E-18 13.00 28.50 19.80 20 8950-E-20 13.00 33.30 24.20 22 8950-E-22 13.00 34.90 26.60 24 8950-E-24 13.00 39.80 29.55 28 8950-E-28 13.00 45.00 35.60 10/12 OC OB A A .52 .52 .52 .52 .52 .52 .52 .52 .76 .87 .99 1.12 1.31 1.37 1.57 1.77 .46 .57 .66 .78 .95 1.05 1.16 1.40 : when using with 892.04 (ESC) connectors, -04 should be added to the backshell number e.g. 8950-E-12-04 (size 12 only) Straight cable clamps shell size part number 10/12 8950-F-12 14 8950-F-14 16 8950-F-16 18 8950-F-18 20 8950-F-20 22 8950-F-22 24 8950-F-24 28 8950-F-28 : when using with 892.04 (ESC) connectors, -04 should be added to the backshell number e.g. 8950-F-12-04 (size 12 only) 279 33 891-2 Series 270-280_typo_mod:Mise en page 1 24/02/2009 11:42 Page 280 891/2 Series Straight adapters shell size thread allows fitting of simple backnuts, cable clamps and further adapters B Max C E Max 8950-A-12 19.90 11.60 23.25 14 8950-A-14 22.20 14.40 23.25 16 8950-A-16 25.20 16.70 23.25 18 8950-A-18 28.50 19.80 23.25 20 8950-A-20 33.20 24.20 23.25 22 8950-A-22 34.90 26.60 23.25 24 8950-A-24 39.80 29.55 23.25 28 8950-A-28 45.00 35.60 26.45 10/12 OC OB part number .76 .46 .87 .92 .57 .99 .92 .66 1.12 .92 .78 1.31 .92 .95 1.37 .92 1.05 1.57 .92 1.16 1.77 .92 1.40 1.04 : when using with 892.04 (ESC) connectors, -04 should be added to the backshell number e.g. 8950-E-12-04 (size 12 only) E Elbow adapters 15 angle applies to shell sizes 24 and 28 shell size part number 10/12 8950-14-12 19.90 24.80 17.50 14 8950-14-14 22.20 24.80 18.50 16 8950-14-16 25.20 26.80 21.00 18 8950-14-18 28.50 29.90 22.50 20 8950-14-20 33.20 29.40 26.00 22 8950-14-22 34.90 32.40 26.00 24 8950-14-24 39.80 24.10 39.60 28 8950-14-28 45.00 35.10 39.60 OC OB G thread allows fitting of simple backnuts, cable clamps and further adapters For dimension C, see tables above F B Max F Max .76 G Max .98 .87 .69 .98 .99 .73 1.05 1.12 .83 1.14 1.31 .89 1.18 1.37 1.02 1.28 1.57 1.02 1.74 1.77 1.56 1.30 1.56 : when using with 892.04 (ESC) connectors, -04 should be added to the backshell number e.g. 8950-E-12-04 (size 12 only) Parking receptacles R 4 holes O T R shell size part number shell size part number 10SL 8950-40 18 8950-45 12S 8950-41 20 8950-46 14S 8950-42 22 8950-47 16S 8950-44 24 8950-48 16 8950-43 28 8950-49 Common dimensions with square flange receptacle (page 276) Metal protective caps temperature class Nuts for jam nut receptacles temperature class Gaskets for jam nut receptacles temperature class Gaskets for square flange receptacles temperature class 10SL 12S 14S 16S 16 18 20 22 24 28 1 8950-60 8950-61 8950-62 8950-63 8950-64 8950-65 8950-66 8950-67 8950-68 8950-69 2 8950-60 8950-61 8950-62 8950-63 8950-64 8950-65 8950-66 8950-67 8950-68 8950-69 10SL 12S 14S 16S 16 18 20 22 24 28 1 8950-339 8950-340 8522-843 8522-844 8522-844 8522-845 8522-846 8522-847 8522-848 8522-341 2 8950-339 8950-340 8522-843 8522-844 8522-844 8522-845 8522-846 8522-847 8522-848 8550-341 10SL 12S 14S 16S 16 18 20 22 24 28 1 8950-4731 8950-4732 8950-4733 8950-4734 8950-4734 8950-4735 8950-4736 8950-4737 8950-4738 8950-4739 2 8950-4731 8950-4732 8950-4733 8950-4734 8950-4734 8950-4735 8950-4736 8950-4737 8950-4738 8950-4739 10SL 12S 14S 16S 16 18 20 22 24 28 1 8950-241 8950-242 8950-243 8950-244 8950-244 8950-245 8950-246 8950-333 8950-247 8950-248 2 8950-241 8950-242 8950-243 8950-244 8950-244 8950-245 8950-246 8950-333 8950-247 8950-248 280 34