CS 19 ADVANCE TECHNICAL INFORMATION VRRM IT(RMS) IT(AV)M Phase Control Thyristor ISOPLUS220TM = 800 - 1200 V = 35 A = 13 A Electrically Isolated Back Surface VRSM VDSM VRRM VDRM V V 800 1200 800 1200 ISOPLUS 220TM Type A C CS 19-08ho1C CS 19-12ho1C G G Test Conditions ITSM TVJ = 45C; VR = 0 V t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 100 105 TVJ = TVJM VR = 0 V t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 85 90 A A TVJ = 45C VR = 0 V t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 50 45 A2 s A2s TVJ = TVJM VR = 0 V t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 36 33 A2 s A2s 100 A/s e Features A A Features z z z z s z a TVJ = TVJM repetitive, IT = 20 A f = 50 Hz, tP =200 s VD = 2/3 VDRM IG =0.08 A non repetitive, IT = IT(AV)M diG/dt = 0.08 A/s h (dv/dt)cr A A -o 35 13 u TVJ = TVJM TC = 85C; 180 sine (di/dt)cr TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) z 500 A/s 500 V/s z W W W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 C C C 2500 V~ 260 C p tP = tP = 30 s 300 s 5 2.5 0.5 PGAV TVJ = TVJM IT = IT(AV)M VISOL 50/60 Hz RMS; IISOL 1 mA TL 1.6mm from case; 10s FC Mounting force 11...65 / 2.4...11 Weight 2 Silicon chip on Direct-Copper-Bond substrate - High power dissipation - Isolated mounting surface - 2500V electrical isolation Low cathode-to-tab capacitance (15pF typical) Planar passivated chips Epoxy meets UL 94V-0 High performance glass passivated chip Long-term stability of leakage current and blocking voltage Applications z PGM Isolated back surface* Maximum Ratings IT(RMS) IT(AV)M I2t S t Symbol D z z z Motor control Power converter AC power controller Light and temperature control SCR for inrush current limiting in power supplies or AC drive Advantages z z Space and weight savings Simple mounting N / lb g IXYS reserves the right to change limits, conditions and dimensions. DS98789A(8/03) (c) 2003 IXYS All rights reserved CS 19 Symbol Test Conditions Characteristic Values IR, ID TVJ = TVJM; VR = VRRM; VD = VDRM 1 VT IT 1.65 V VT0 rT For power-loss calculations only (TVJ = 125C) 0.87 29 V m VGT VD = 6 V; IGT VD = 6 V; VGD IGD TVJ = TVJM; IL 1.5 2.5 25 50 V V mA mA VD = 2/3 VDRM 0.2 3 V mA TVJ = 25C; tP = 10 s IG =0.08 A; diG/dt =0.08 A/s 75 mA IH TVJ = 25C; VD = 6 V; RGK = 50 mA tgd TVJ = 25C; VD = 1/2 VDRM IG = 0.08 A; diG/dt = 0.08 A/s RthJC RthCK DC current DC current a Max. acceleration, 50 Hz s -o 2 t TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C u = 30 A; TVJ = 25C mA a s e typical p h ISOPLUS220 OUTLINE 1.7 0.6 K/W K/W 50 m/s2