September 2015
NTCG06 0603 [0201 inch]*
NTCG10 1005 [0402 inch]
NTCG16 1608 [0603 inch]
NTCG20 2012 [0805 inch]
* Dimensions Code JIS[EIA]
NTC Thermistors
SMD
NTCG
series
Temperature Protection Devices
(2/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Temperature Protection Devices
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
Please pay careful attention to the precautions and follow safe designing practices when using these products.
Incorrect usage may lead to destroyed NTC thermistors and damages or malfunctions with the devices used.
Please use them within the ranges of the ratings and performance provided in the Catalog and delivery specifications upon confirming the
environments where they are to be used and installed.
Do not use them outside the operating temperature range.
Do not use them with the ratings or maximum permissible power levels exceeded.
Do not quickly apply 5mW or more of load with the constant-voltage power supply in the NTC thermistor as this may lead to staying in
thermal runaway mode or the red-shorting of chips.
Please be cautious of the applied voltage in thermistors as instruments may malfunction with the lowering of resistance due to self heating.
With instruments that consumers can touch the thermistors with their hands, please carefully warn them not to touch the thermistors.
Store them in locations where the temperature is –10°C to +40°C and the relative humidity is 75% or below, avoid environments where
there are sudden changes in temperatures, direct sunlight, corrosive gas, grit, or dust, and keep them packed in a manner where no
loading stress is applied in order to avoid deterioration and damage. (Please use them within six months.)
When sealing thermistors, please do so upon first considering the type, quantity, hardening conditions, and adhesiveness of the sealing
material and confirming its reliability.
Avoid powerful vibrations, impact (such as by dropping), pressure, etc. on thermistors that exceed the prescribed levels.
Do not use them for long periods of time in environments with a relative humidity of over 85%. (This excludes cases where
countermeasures have been taken.)
Do not use them in the following environments. (This excludes cases where countermeasures have been taken.)
Environments with corrosive gas (Cl2, NH3, SOx, NOx, etc.)
Environments with highly conductive substances (electrolytes, water, saltwater, etc.)
Environments with acid, alkali, or organic solvents
Dusty areas
Please observe the following precautions when attaching them to substrates as failure to do so may result in destruction or malfunction.
Do not let the substrates get warped or twisted at any time during the soldering.
The landing size must be even on both the left and right sides.
Do not use items that have been dropped or detached.
Do not allow the adherence of more solder than needed.
Reflow mounting is recommended with NTC thermistors, and not flow (dip) mounting.
Attaching or making corrections with a soldering iron is not recommended as it can lead to troubles such as significant distorting due to
thermal shock or cracking. If a soldering iron must be used, it should be 30W or below with the temperature of the tip at 350°C or below,
and at a maximum of 5 seconds of soldering time. Also, do not let the tip of the soldering iron come in direct contact with the chips.
When attaching or making corrections with a soldering iron, the temperature of the tip of the soldering iron should be 350°C or below at a
maximum of 5 seconds of soldering time. Do not let the tip of the soldering iron come in directly come in contact with the chips as doing
so may lead to particularly large distortions due to thermal shock or cracking.
Please use a substance such as resin that does not generate hydrogen (H2) when forming insulation film over chips.
Please contact our sales offices when considering the use of the products listed on this catalog for applications, whose performance and/
or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property ('specific uses' such as automobiles, airplanes,medical instruments, nuclear devices, etc.) as well as when
considering the use for applications that exceed the range and conditions of this catalog.
Please note that we are not responsible for any damages or losses incurred resulting from the use of these products that exceeds the range
and conditions of this catalog or specific uses.
Please take appropriate measures such as acquiring protective circuits and devices that meet the uses, applications, and conditions of the
instruments and keeping backup circuits.
REMINDERS
(3/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTC Thermistors
SMD
CHARACTERISTICS OF NTC THERMISTORS (EXAMPLE)
NTC(Negative Temperature Coefficient) Thermistors are manufactured from sintered metal oxides. Each thermistor consists of a combination
of two to four of the following materials: Manganese, Nickel, Cobalt and Copper. NTC thermistors are semiconductor resistors that exhibit
decreasing resistance characteristics with increasing temperature. TDK thermistors have low thermal time constants which result in extremely
high rates of resistance change to accurately track the temperature.
FEATURES
Small sized 0603 type (L0.6× W0.3× T0.3mm) series are available.
Lead (Pb) free product. By using lead-less terminal electrodes and electroplating (Ni-Sn), this product realized excellent solderablity and
soldering heat resistance, comparing with the conventional eutectic mixture solder and lead-free solder (Sn/Ag/Cu, etc.).
Product series provides a wide range of resistances and B constants. Good stability of resistance value after soldering. The 0603, 1005,
1608 and 2012 size provide 4 different shapes with identical resistance-temperature characteristics. Attains less that low floating capac-
itance (using TCXO) in the high frequency region.
APPLICATION
Temperature sensor
Temperature compensation
TYPICAL USED SET AND TDK PRODUCT NAMES
Overview of the NTCG Series
Used set Applied circuit Resistance
(R25)
B constant
(B25/85)
TDK recommended
part number
Mobile
communication
devices
TCXO(Temperature
compensated crystal
oscillator)
Low-temperature area compensated circuit 30: to 100:3250K(2800K) NTCG103EH400H
High-temperature area compensated circuit 1.0k: to 3.0k:4100K to 4500K NTCG104BH102H
Power amplifier module Power amplifier temperature compensated circuit 30: to 10k:3250K to 4500K NTCG104KH202J
LCD LCD temperature compensated circuit 22k: to 1M:4550K to 4750K NTCG104LH473J
Temperature monitor Various-circuit temperature compensated circuit 10k: to 470k:4100K to 4750K NTCG104BH103J
Battery pack Battery temperature monitor and charging control
circuit 10k: to 100k:3435K to 4550K NTCG103JF103F
Computer devices
CPU CPU temperature monitor 10k: to 1M:3435K to 4550K NTCG103JF103F
LCD LCD temperature compensated circuit 22k: to 1M:4550K to 4750K NTCG104LH473J
HDD Pickup temperature compensated circuit 10k: to 100k:3435K to 4550K NTCG103JF103F
NTCG104EF104F
ODD CD or DVD write current compensated circuit 10k: to 100k:3435K to 4550K NTCG103JF103F
NTCG104EF104F
Battery pack Battery temperature monitor and charging control
circuit 10k: to 100k:3435K to 4550K NTCG103JF103F
DVC, DSC
Auto focus Driving circuit temperature compensated circuit 1.0k: to 15k:3435K to 4100K NTCG104BH103J
Iris stop Hole element temperature compensated circuit 10k: to 100k:3435K to 4550K NTCG104LH473J
Battery pack Battery temperature monitor and charging control
circuit 10k: to 100k:3435K to 4550K NTCG103JF103F
Car audio unit Car CD or MD Laser pickup temperature compensated circuit 22k: to 150k:4550K NTCG104LH473J
Optical transmission
system
Laser transmitter or receiver temperature compensated
circuit 1.0k: to 150k:4100K to 4550K NTCG104LH154J
Printer Ink viscosity controller 10k: to 47k:3435K to 4550K NTCG104LH473H
Product compatible with RoHS directive
Compatible with lead-free solders
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
(4/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
Overview of the NTCG Series
CIRCUIT EXAMPLES
1. CELLULAR PHONE, TABLET TERMINAL
Power amp. module, Temperature monitor
Control of voltage
2. HARD DISK DRIVE
Chip NTC thermistor
NTCG06NTCG10 types
Resistance tolerance: ±1 to ±5%/B constant tolerance: ±1 to ±3%
TEMPERATURE SENSOR IC NTC THERMISTOR
(Cost: about 50% down)
Voltage vs. temperature characteristics
3. BATTERY PACK
Control circuit for quick charge battery
Main Board
LCD Display
Touch Panel
Bluetooth
/Wi-fi
Data Interface Side ButtonSpeaker
Power
Management
CPU
PA Module
Front Camera
Speaker Rear Camera
Headphone
Power SW
BatteryVibrator
Sensor, Power SW
Volume, Hold SW
Headphone
Data Interface,
Button, Speaker
Volume
Hold SW
NTC
NTC
Spindle motor
Track
Disk
Actuator
Swing arm
Magnetic head
IC
8bit
NTC
R1
R2
8bit R1:10kΩ±5%
R2:10kΩ±5%
NTC R
25
:10kΩ±5%
B
25/85
:4100K±3%
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
–50 0 +50 +100 +150
Temperature(˚C)
Voltage(V)
Vmax.
Vnom.
Vmin.
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
–50 0 +50 +100 +150
Temperature(˚C)
Voltage(V)
Vmax.
Vnom.
Vmin.
(5/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
Overview of the NTCG Series
RESISTANCE VALUE RANGE
LIST OF SERIES BY TYPE
The B constant indicates the magnitude of a change in a zero-load resistance value to a temperature, and is obtained based on arbitrary
two temperatures in resistance-to-temperature characteristics.
B constant calculation formula
B: B Constant (K)
T1: Arbitrary temperature (K)
T2: Arbitrary temperature different from T1 (K)
R1: Zero-load resistance value at temperature T1(:)
R2: Zero-load resistance value at temperature T2(:)
Each temperature is measured in absolute temperature. 0°C=273.15K
Type 10Ω100Ω 1kΩ10kΩ100kΩ1MΩ
Resistance
NTCG06
NTCG10
NTCG16
NTCG20
1MΩ
1MΩ
1MΩ
150kΩ
30Ω
30Ω
30Ω
470Ω
Type B constant(K) Nominal resistance(Ω) [at 25°C]
10Ω
1.0kΩ
1.0kΩ
4.7kΩ
10kΩ
47kΩ
100kΩ150kΩ
33kΩ
15kΩ
3.3kΩ
1.5kΩ
470Ω
3.0kΩ
15kΩ
1MΩ
150kΩ
3.0kΩ
10kΩ
100Ω1kΩ10kΩ100kΩ1MΩ
NTCG06
NTCG10
NTCG16
2800K
3250K
3435K
3650K
4100K
4100K
4550K
4750K
4500K
NTCG20
3250K
3100K
3300K
3450K
3650K
3850K
4000K
4150K
150Ω
3.3kΩ
22kΩ
220kΩ
2.0kΩ
680Ω
6.8kΩ
68kΩ
22kΩ
B constant is calculated from the resistance at 25°C and 85°C
30Ω
2.2kΩ
(0603 type: 33kΩ min.)
680Ω
220Ω
100Ω
InR1InR2
(1/T1)(1/T2)
B=
(6/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
Overview of the NTCG Series
PART NUMBER CONSTRUCTION
The size of the B constant is indicated with a combination of one numeric character and one alphabetic character. Refer to the below for values
representing numeric characters and alphabetic characters.
Resistance tolerance H(±3%) products: NTCG20 type is excluded. For more details, please contact us separately.
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Concerning the "Standard" and "High reliability" of NTCG10 and NTCG16 types, please refer to Taping specifications in PART NUMBER
CONSTRUCTION.
Operating temperature range includes self-temperature rise.
The Storage temperature range is for after the circuit board is mounted.
NTC G ○○ 3E H 101 T
Series
name
Structural
classification
Shapes and
dimensions
code
B constant
B constant
tolerance
(%)
Nominal
resistance
(:)
Nominal
resistance
tolerance
(%)
Packaging
style
TDK internal code:
Taping specifications
NTC
thermistor
G
Multilayer internal
electroded chip
type
NTC thermistor
(Pb free type)
06 0603 3E 3201 to
3250 F ±1 300 30 F ±1 T Taping 1 Standard
10 1005 3N 3601 to
3650 H ±3 101 100 G ±2 B Bulk B NTCG06 type
standard
16 1608 4L 4501 to
4550 102 1000
(1k:)3 DS Automotive
(High reliability)
20 2012 4Q 4701 to
4750 103 10000
(10k:)5 1S
150°C
correspondence
(High reliability)
Numeric characters
(Represent the thousands place of the B constant)
Alphabetic characters
(Represent the ones, tens, and hundreds places of the B constant)
2 2000 A 0 to 50 K 451 to 500
3 3000 B 51 to 100 L 501 to 550
4 4000 C 101 to 150 N 601 to 650
E 201 to 250 Q 701 to 750
F 251 to 300 S 801 to 850
J401 to 450
Type
Temperature range
Package quantity Individual weight
Operating
temperature
Storage
temperature
°C °C pieces/reel mg
NTCG06 –40 to +125 –40 to +125 15000 0.3
NTCG10 Standard –40 to +125 –40 to +125 10000 2.5
High reliability –40 to +150 –40 to +150
NTCG16 Standard –40 to +125 –40 to +125 4000 5.0
High reliability –40 to +150 –40 to +150
NTCG20 –40 to +125 –40 to +125 2000 7.2
(7/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
Overview of the NTCG Series
RECOMMENDED REFLOW PROFILE
Preheating Soldering Peak
Temp. Time Temp. Time Temp. Time
T1 T2 t1 T3 t2 T4 t3
150°C 180°C 60 to 120s 220°C 60s 250 to 260°C 10s max.
Natural
cooling
t3
t1
Preheating
t2
Soldering
T3 T3
T4
T2
T1
t: Time
Peak
T: Temperature
(8/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG series
NTCG06 Type
SHAPE & DIMENSIONS STRUCTURAL DIAGRAM
RECOMMENDED LAND PATTERN
0.6±0.03
0.3±0.030.3±0.03
Electrode material
Internal:Pd
External:Ag/Ni/Sn
0.1 min.
Dimensions in mm
Thermistor body
(Metal oxide sintering ceramics)
Inner electrode
(Palladium)
Sn plating
Ni plating
Ag termination
underlayer
0.25 to 0.35
0.25 to 0.35 0.2 to 0.30.2 to 0.3
(9/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG06 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
The " " of the Part Number contains the nominal resistance tolerance, H (±3%) or J (±5%). However, in case the nominal resistance value is 30: or less,
only J can be contained.
RESISTANCE vs. TEMPERATURE CHARACTERISTICS TABLE (CONVERSION TABLE)
Examples
1R25=R25/R25(1.000)u30=30:2R25=R25/R25(1.000)u10=10k:3B25/50: 3380±1%
R85=R85/R25(0.1610)uR25(30:)=4.83:R85=R85/R25(0.09989)uR25(10k:)=0.999k:
Resistance-temperature group Part No.Nominal resistance value
[25°C]
B constant
[25/85°C] [25/50°C]
ANTCG063EH300 30:3250K±3% (3244K)
NTCG063EH400 40:3250K±3% (3244K)
BNTCG062QH101 100:2800K±3% (2794K)
DNTCG064KH202 2.0k:4500K±3% (4498K)
NTCG064KH302 3.0k:4500K±3% (4498K)
ENTCG064BH103 10k:4100K±3% (4067K)
H NTCG063JH103 10k:3435K±3% (3380K)
Temp.(°C)
Resistance-temperature
group
A B D E H
RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T)
–40 19.59 3182 12.65 2714 58.88 4358 38.44 3903 18.850 3140
–35 14.79 3188 9.960 2720 40.29 4374 27.34 3915 14.429 3159
–30 11.28 3193 7.912 2726 27.92 4389 19.68 3928 11.133 3176
–25 8.685 3199 6.337 2732 19.59 4402 14.33 3939 8.656 3194
–20 6.753 3204 5.116 2738 13.90 4415 10.54 3951 6.779 3210
–15 5.298 3208 4.161 2743 9.976 4426 7.837 3962 5.346 3226
–10 4.192 3213 3.408 2749 7.236 4436 5.883 3972 4.245 3241
–5 3.343 3217 2.810 2754 5.303 4446 4.456 3982 3.393 3256
0 2.687 3220 2.332 2759 3.925 4454 3.406 3992 2.728 3270
52.176 3224 1.947 2763 2.933 4462 2.625 4001 2.207 3283
10 1.774 3227 1.635 2768 2.212 4469 2.039 4010 1.796 3296
15 1.456 3230 1.381 2772 1.683 4475 1.596 4018 1.470 3308
20 1.203 3233 1.172 2776 1.292 4480 1.259 4026 1.209 3320
25 1.00013235 1.000 2780 1.000 4485 1.00024034 1.000 3332
30 0.8360 3237 0.857 2783 0.7801 4488 0.7997 4041 0.831 3343
35 0.7029 3239 0.738 2786 0.6133 4492 0.6437 4048 0.694 3353
40 0.5941 3241 0.639 2789 0.4857 4494 0.5213 4055 0.583 3363
45 0.5047 3243 0.555 2792 0.3875 4497 0.4248 4061 0.491 3373
50 0.4309 3244 0.484 2794 0.3112 4498 0.3481 4067 0.416
33823
(3346 to
3414)
55 0.3697 3246 0.424 2796 0.2516 4500 0.2869 4072 0.354 3390
60 0.3185 3247 0.373 2797 0.2048 4501 0.2377 4078 0.302 3399
65 0.2757 3248 0.329 2799 0.1677 4501 0.1979 4083 0.259 3407
70 0.2396 3248 0.292 2799 0.1381 4501 0.1657 4087 0.223 3414
75 0.2091 3249 0.260 2800 0.11439 4501 0.1393 4092 0.192 3422
80 0.1832 3250 0.232 2800 0.09528 4501 0.1177 4096 0.167 3428
85 0.161013250 0.207 2800 0.07978 4500 0.0998924100 0.145 3435
90 0.1421 3250 0.186 2799 0.06714 4499 0.08513 4104 0.127 3441
95 0.1258 3251 0.168 2798 0.05679 4498 0.07286 4107 0.111 3447
100 0.1118 3251 0.152 2797 0.04826 4497 0.06260 4110 0.0975 3453
105 0.09960 3251 0.138 2795 0.04119 4495 0.05400 4114 0.0860 3458
110 0.08903 3251 0.125 2793 0.03532 4493 0.04675 4116 0.0760 3463
115 0.07981 3251 0.114 2790 0.03041 4491 0.04063 4119 0.0674 3468
120 0.07175 3251 0.104 2787 0.02629 4489 0.03543 4122 0.0599 3473
125 0.06468 3251 0.096 2783 0.02282 4487 0.03099 4124 0.0534 3478
(10/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG06 Type (Narrow tolerance type products)
ELECTRICAL CHARACTERISTICS (Narrow tolerance type products)
CHARACTERISTICS SPECIFICATION TABLE
The products support narrow tolerance. The " " of the Part Number contains the nominal resistance tolerance, F (±1%), G (±2%), or H (±3%).
RESISTANCE vs. TEMPERATURE CHARACTERISTICS TABLE (CONVERSION TABLE)
1 B25/50: 3380±1%
2 B25/50: 4050±3%
Resistance-temperature group Part No.Nominal resistance value
[25°C]
B constant
[25/85°C] [25/50°C]
HNTCG063JF103 10k:±%3435K±1% (3380K)
NTCG064EF104 100k:±%(4308K) 4250K±1%
Temp.(°C)
Resistance-temperature group
H J K
RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T)
–40 18.850 3140 35.340 3813 42.510 4010
–35 14.429 3159 25.280 3822 30.049 4027
–30 11.133 3176 18.330 3834 21.489 4043
–25 8.656 3194 13.470 3848 15.538 4059
–20 6.779 3210 10.010 3864 11.353 4075
–15 5.346 3226 7.520 3882 8.378 4090
–10 4.245 3241 5.697 3900 6.241 4105
–5 3.393 3256 4.352 3919 4.691 4119
0 2.728 3270 3.349 3937 3.556 4133
52.207 3283 2.596 3956 2.718 4147
10 1.796 3296 2.026 3974 2.094 4160
15 1.470 3308 1.591 3989 1.625 4172
20 1.209 3320 1.258 4012 1.270 4185
25 1.000 3332 1.000 4024 1.000 4196
30 0.831 3343 0.800 4036 0.792 4208
35 0.694 3353 0.644 4049 0.632 4219
40 0.583 3363 0.521 4062 0.507 4230
45 0.491 3373 0.424 4074 0.409 4240
50 0.416 33821
(3346 to 3414) 0.347 40852
(3928 to 4171) 0.332 4250
55 0.354 3390 0.285 4096 0.271 4259
60 0.302 3399 0.235 4106 0.222 4269
65 0.259 3407 0.195 4115 0.183 4277
70 0.223 3414 0.163 4126 0.152 4286
75 0.192 3422 0.137 4134 0.126 4293
80 0.167 3428 0.115 4142 0.106 4301
85 0.145 3435 0.0971 4150 0.0889 4308
90 0.127 3441 0.0824 4158 0.0750 4315
95 0.111 3447 0.0702 4165 0.0636 4321
100 0.0975 3453 0.0601 4172 0.0541 4327
105 0.0860 3458 0.0515 4179 0.0462 4332
110 0.0760 3463 0.0444 4186 0.0397 4338
115 0.0674 3468 0.0384 4193 0.0342 4342
120 0.0599 3473 0.0333 4199 0.0295 4347
125 0.0534 3478 0.0289 4206 0.0256 4351
(11/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG06 Type
CHARACTERISTICS OF NTC THERMISTORS (EXAMPLE)
Y-axis: Linear Y-axis: Log.
–50 0 50
Temperature(˚C)
Resistance(kΩ)
100 150
0
20
40
60
80
100
120
140
160
180
200
–50 0 50
Temperature(˚C)
Resistance(kΩ)
100 150
0.1
1
10
100
1000
(12/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG series
NTCG10 Type
SHAPE & DIMENSIONS STRUCTURAL DIAGRAM
RECOMMENDED LAND PATTERN
Dimensions in mm
1±0.05
0.5±0.050.5±0.05
Electrode material
Internal:Pd
External:Ag/Ni/Sn
0.1 min.
Thermistor body
(Metal oxide sintering ceramics)
Inner electrode
(Palladium)
Sn plating
Ni plating
Ag termination
underlayer
0.4 to 0.6
0.3 to 0.5 0.35 to 0.450.35 to 0.45
(13/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG10 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
The " " of the Part Number contains the nominal resistance tolerance, H (±3%) or J (±5%). However, in case the nominal resistance value is 30: or less,
only J can be contained.
Resistance-temperature group Part No.Nominal resistance value
[25°C]
B constant
[25/85°C] [25/50°C]
A
NTCG103EH300 30:3250K±3% (3244K)
NTCG103EH400 40:3250K±3% (3244K)
NTCG103EH101 100:3250K±3% (3244K)
C
NTCG104BH102 1.0k:4100K±3% (4096K)
NTCG104BH152 1.5k:4100K±3% (4096K)
NTCG104BH222 2.2k:4100K±3% (4096K)
E
NTCG104BH472 4.7k:4100K±3% (4067K)
NTCG104BH682 6.8k:4100K±3% (4067K)
NTCG104BH103 10k:4100K±3% (4067K)
F
NTCG104LH223 22k:4550K±3% (4485K)
NTCG104LH333 33k:4550K±3% (4485K)
NTCG104LH473 47k:4550K±3% (4485K)
NTCG104LH683 68k:4550K±3% (4485K)
NTCG104LH104 100k:4550K±3% (4485K)
NTCG104LH154 150k:4550K±3% (4485K)
G
NTCG104QH224 220k:4750K±3% (4661K)
NTCG104QH334 330k:4750K±3% (4661K)
NTCG104QH474 470k:4750K±3% (4661K)
NTCG104QH105 1.0M:4750K±3% (4661K)
HNTCG103JH103 10k:3435K±3% (3380K)
JNTCG104BF473 47k:(4150K) 4085K±1%
NTCG104BF683 68k:(4150K) 4085K±1%
KNTCG104EH104 100k:(4308K) 4250K±3%
U NTCG103UH103J 10k:3950K±3% (3900K)
(14/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG10 Type
ELECTRICAL CHARACTERISTICS
RESISTANCE vs. TEMPERATURE CHARACTERISTICS TABLE (CONVERSION TABLE)
Examples
1R25=R25/R25(1.000)u30=30:2R25=R25/R25(1.000)u10=10k:
R85=R85/R25(0.1610)uR25(30:)=4.83:R85=R85/R25(0.09989)uR25(10k:)=0.999k:
Temp.(°C)
Resistance-temperature group
A C E F
RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T)
–40 19.59 3182 41.78 3991 38.44 3903 50.89 4203
–35 14.79 3188 29.45 4003 27.34 3915 35.49 4224
–30 11.28 3193 21.01 4014 19.68 3928 25.03 4245
–25 8.685 3199 15.17 4024 14.33 3939 17.85 4264
–20 6.753 3204 11.07 4033 10.54 3951 12.86 4284
–15 5.298 3208 8.168 4041 7.837 3962 9.353 4302
–10 4.192 3213 6.087 4049 5.883 3972 6.869 4320
–5 3.343 3217 4.581 4056 4.456 3982 5.090 4337
0 2.687 3220 3.480 4062 3.406 3992 3.805 4353
52.176 3224 2.667 4068 2.625 4001 2.868 4369
10 1.774 3227 2.062 4073 2.039 4010 2.179 4384
15 1.456 3230 1.607 4077 1.596 4018 1.669 4399
20 1.203 3233 1.263 4081 1.259 4026 1.287 4412
25 1.00013235 1.000 4084 1.00024034 1.000 4426
30 0.8360 3237 0.7976 4088 0.7997 4041 0.7823 4439
35 0.7029 3239 0.6407 4090 0.6437 4048 0.6160 4451
40 0.5941 3241 0.5182 4092 0.5213 4055 0.4882 4463
45 0.5047 3243 0.4218 4094 0.4248 4061 0.3893 4474
50 0.4309 3244 0.3455 4096 0.3481 4067 0.3123 4485
55 0.3697 3246 0.2847 4097 0.2869 4072 0.2520 4496
60 0.3185 3247 0.2360 4098 0.2377 4078 0.2044 4506
65 0.2757 3248 0.1967 4099 0.1979 4083 0.1667 4515
70 0.2396 3248 0.1648 4099 0.1657 4087 0.1367 4524
75 0.2091 3249 0.1388 4100 0.1393 4092 0.1126 4533
80 0.1832 3250 0.1175 4100 0.1177 4096 0.09325 4542
85 0.161013250 0.0999 4100 0.0998924100 0.07757 4550
90 0.1421 3250 0.0853 4100 0.08513 4104 0.06482 4558
95 0.1258 3251 0.0732 4100 0.07286 4107 0.05440 4565
100 0.1118 3251 0.0630 4100 0.06260 4110 0.04584 4573
105 0.09960 3251 0.05451 4100 0.05400 4114 0.03879 4580
110 0.08903 3251 0.04731 4100 0.04675 4116 0.03295 4586
115 0.07981 3251 0.04121 4101 0.04063 4119 0.02810 4593
120 0.07175 3251 0.03602 4101 0.03543 4122 0.02405 4599
125 0.06468 3251 0.03159 4101 0.03099 4124 0.02066 4606
(15/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG10 Type
ELECTRICAL CHARACTERISTICS
RESISTANCE VS. TEMPERATURE CHARACTERISTICS TABLE (CONVERSION TABLE)
1 B25/50: 3380±1%
2 B25/50: 4050±3%
3 B25/50: 3900±3%
Temp.(°C)
Resistance-temperature group
G H J K U
RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T)
–40 18.850 3140 35.340 3813 42.510 4010 31.059 3675
–35 14.429 3159 25.280 3822 30.049 4027 22.561 3688
–30 11.133 3176 18.330 3834 21.489 4043 16.573 3701
–25 8.656 3194 13.470 3848 15.538 4059 12.304 3714
–20 13.55 4371 6.779 3210 10.010 3864 11.353 4075 9.226 3727
–15 9.833 4398 5.346 3226 7.520 3882 8.378 4090 6.983 3740
–10 7.197 4424 4.245 3241 5.697 3900 6.241 4105 5.333 3752
–5 5.309 4449 3.393 3256 4.352 3919 4.691 4119 4.107 3765
0 3.947 4473 2.728 3270 3.349 3937 3.556 4133 3.188 3777
52.957 4496 2.207 3283 2.596 3956 2.718 4147 2.494 3789
10 2.232 4518 1.796 3296 2.026 3974 2.094 4160 1.965 3801
15 1.696 4539 1.470 3308 1.591 3989 1.625 4172 1.559 3813
20 1.298 4559 1.209 3320 1.258 4012 1.270 4185 1.245 3824
25 1.000 4577 1.000 3332 1.000 4024 1.000 4196 1.000 3835
30 0.7755 4596 0.831 3343 0.800 4036 0.792 4208 0.808 3847
35 0.6052 4614 0.694 3353 0.644 4049 0.632 4219 0.657 3857
40 0.4753 4630 0.583 3363 0.521 4062 0.507 4230 0.537 3868
45 0.3754 4646 0.491 3373 0.424 4074 0.409 4240 0.441 3878
50 0.2983 4661 0.416 33821
(3346 to 3414) 0.347 40852
(3928 to 4171) 0.332 4250 0.365 38883
(3783 to 4017)
55 0.2384 4676 0.354 3390 0.285 4096 0.271 4259 0.303 3898
60 0.1916 4690 0.302 3399 0.235 4106 0.222 4269 0.252 3907
65 0.1548 4703 0.259 3407 0.195 4115 0.183 4277 0.211 3917
70 0.1257 4716 0.223 3414 0.163 4126 0.152 4286 0.178 3925
75 0.1026 4728 0.192 3422 0.137 4134 0.126 4293 0.150 3934
80 0.08412 4739 0.167 3428 0.115 4142 0.106 4301 0.128 3942
85 0.06933 4750 0.145 3435 0.0971 4150 0.0889 4308 0.109 3950
90 0.05740 4760 0.127 3441 0.0824 4158 0.0750 4315 0.0929 3958
95 0.04773 4770 0.111 3447 0.0702 4165 0.0636 4321 0.0798 3965
100 0.03987 4780 0.0975 3453 0.0601 4172 0.0541 4327 0.0687 3972
105 0.03344 4789 0.0860 3458 0.0515 4179 0.0462 4332 0.0594 3978
110 0.02817 4797 0.0760 3463 0.0444 4186 0.0397 4338 0.0516 3985
115 0.02382 4806 0.0674 3468 0.0384 4193 0.0342 4342 0.0449 3990
120 0.02022 4813 0.0599 3473 0.0333 4199 0.0295 4347 0.0392 3996
125 0.01723 4821 0.0534 3478 0.0289 4206 0.0256 4351 0.0344 4001
(16/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG10 Type (Narrow tolerance type products)
ELECTRICAL CHARACTERISTICS (Narrow tolerance type products)
CHARACTERISTICS SPECIFICATION TABLE
The products support narrow tolerance. The " " of the Part Number contains the nominal resistance tolerance, F (±1%), G (±2%), or H (±3%).
RESISTANCE vs. TEMPERATURE CHARACTERISTICS TABLE (CONVERSION TABLE)
1 B25/50: 3380±1%
2 B25/50: 4050±3%
Resistance-temperature group Part No.Nominal resistance value
[25°C]
B constant
[25/85°C] [25/50°C]
H NTCG103JF103 10k:± % 3435K±1% (3380K)
JNTCG104BF473 47k:±% (4150K) 4085K±1%
K NTCG104EF104 100k:± % (4308K) 4250K±1%
Temp.(°C)
Resistance-temperature group
H J K
RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T)
–40 18.850 3140 35.340 3813 42.510 4010
–35 14.429 3159 25.280 3822 30.049 4027
–30 11.133 3176 18.330 3834 21.489 4043
–25 8.656 3194 13.470 3848 15.538 4059
–20 6.779 3210 10.010 3864 11.353 4075
–15 5.346 3226 7.520 3882 8.378 4090
–10 4.245 3241 5.697 3900 6.241 4105
–5 3.393 3256 4.352 3919 4.691 4119
0 2.728 3270 3.349 3937 3.556 4133
52.207 3283 2.596 3956 2.718 4147
10 1.796 3296 2.026 3974 2.094 4160
15 1.470 3308 1.591 3989 1.625 4172
20 1.209 3320 1.258 4012 1.270 4185
25 1.000 3332 1.000 4024 1.000 4196
30 0.831 3343 0.800 4036 0.792 4208
35 0.694 3353 0.644 4049 0.632 4219
40 0.583 3363 0.521 4062 0.507 4230
45 0.491 3373 0.424 4074 0.409 4240
50 0.416 33821
(3346 to 3414) 0.347 40852
(3928 to 4171) 0.332 4250
55 0.354 3390 0.285 4096 0.271 4259
60 0.302 3399 0.235 4106 0.222 4269
65 0.259 3407 0.195 4115 0.183 4277
70 0.223 3414 0.163 4126 0.152 4286
75 0.192 3422 0.137 4134 0.126 4293
80 0.167 3428 0.115 4142 0.106 4301
85 0.145 3435 0.0971 4150 0.0889 4308
90 0.127 3441 0.0824 4158 0.0750 4315
95 0.111 3447 0.0702 4165 0.0636 4321
100 0.0975 3453 0.0601 4172 0.0541 4327
105 0.0860 3458 0.0515 4179 0.0462 4332
110 0.0760 3463 0.0444 4186 0.0397 4338
115 0.0674 3468 0.0384 4193 0.0342 4342
120 0.0599 3473 0.0333 4199 0.0295 4347
125 0.0534 3478 0.0289 4206 0.0256 4351
(17/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG10 Type
CHARACTERISTICS OF NTC THERMISTORS (EXAMPLE)
Y-axis: Linear Y-axis: Log.
–50 0 50
Temperature(˚C)
Resistance(kΩ)
100 150
0
20
40
60
80
100
120
140
160
180
200
–50 0 50
Temperature(˚C)
Resistance(kΩ)
100 150
0.1
1
10
100
1000
(18/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG series
NTCG16 Type
SHAPE & DIMENSIONS STRUCTURAL DIAGRAM
RECOMMENDED LAND PATTERN
Dimensions in mm
1.6±0.1
0.8±0.10.8±0.1
Electrode material
Internal:Pd
External:Ag/Ni/Sn
0.2 min.
Thermistor body
(Metal oxide sintering ceramics)
Inner electrode
(Palladium)
Sn plating
Ni plating
Ag termination
underlayer
0.6 to 0.8
0.6 to 0.8 0.6 to 0.80.6 to 0.8
(19/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG16 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
The " " of the Part Number contains the nominal resistance tolerance, H (±3%) or J (±5%). However, in case the nominal resistance value is 30: or less,
only J can be contained.
Resistance-temperature group Part No.Nominal resistance value
[25°C]
B constant
[25/85°C] [25/50°C]
A
NTCG163EH300 30:3250K±3% (3244K)
NTCG163EH400 40:3250K±3% (3244K)
NTCG163EH101 100:3250K±3% (3244K)
CNTCG164BH102 1.0k:4100K±3% (4096K)
NTCG164BH222 2.2k:4100K±3% (4096K)
E
NTCG164BH332 3.3k:4100K±3% (4067K)
NTCG164BH472 4.7k:4100K±3% (4067K)
NTCG164BH103 10k:4100K±3% (4067K)
F
NTCG164LH223 22k:4550K±3% (4485K)
NTCG164LH333 33k:4550K±3% (4485K)
NTCG164LH473 47k:4550K±3% (4485K)
NTCG164LH104 100k:4550K±3% (4485K)
NTCG164LH154 150k:4550K±3% (4485K)
G
NTCG164QH224 220k:4750K±3% (4661K)
NTCG164QH334 330k:4750K±3% (4661K)
NTCG164QH474 470k:4750K±3% (4661K)
NTCG164QH105 1.0M:4750K±3% (4661K)
HNTCG163JH103 10k:3435K±3% (3380K)
J NTCG164CH473 47k:4150K±3% (4050K)
(20/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG16 Type
ELECTRICAL CHARACTERISTICS
RESISTANCE vs. TEMPERATURE CHARACTERISTICS TABLE (CONVERSION TABLE)
Examples
1R25=R25/R25(1.000)u30=30:2R25=R25/R25(1.000)u10=10k:
R85=R85/R25(0.1610)uR25(30:)=4.83:R85=R85/R25(0.09989)uR25(10k:)=0.999k:
Temp.(°C)
Resistance-temperature group
A C E F
RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T)
–40 19.59 3182 41.78 3991 38.44 3903 50.89 4203
–35 14.79 3188 29.45 4003 27.34 3915 35.49 4224
–30 11.28 3193 21.01 4014 19.68 3928 25.03 4245
–25 8.685 3199 15.17 4024 14.33 3939 17.85 4264
–20 6.753 3204 11.07 4033 10.54 3951 12.86 4284
–15 5.298 3208 8.168 4041 7.837 3962 9.353 4302
–10 4.192 3213 6.087 4049 5.883 3972 6.869 4320
–5 3.343 3217 4.581 4056 4.456 3982 5.090 4337
0 2.687 3220 3.480 4062 3.406 3992 3.805 4353
52.176 3224 2.667 4068 2.625 4001 2.868 4369
10 1.774 3227 2.062 4073 2.039 4010 2.179 4384
15 1.456 3230 1.607 4077 1.596 4018 1.669 4399
20 1.203 3233 1.263 4081 1.259 4026 1.287 4412
25 1.00013235 1.000 4084 1.00024034 1.000 4426
30 0.8360 3237 0.7976 4088 0.7997 4041 0.7823 4439
35 0.7029 3239 0.6407 4090 0.6437 4048 0.6160 4451
40 0.5941 3241 0.5182 4092 0.5213 4055 0.4882 4463
45 0.5047 3243 0.4218 4094 0.4248 4061 0.3893 4474
50 0.4309 3244 0.3455 4096 0.3481 4067 0.3123 4485
55 0.3697 3246 0.2847 4097 0.2869 4072 0.2520 4496
60 0.3185 3247 0.2360 4098 0.2377 4078 0.2044 4506
65 0.2757 3248 0.1967 4099 0.1979 4083 0.1667 4515
70 0.2396 3248 0.1648 4099 0.1657 4087 0.1367 4524
75 0.2091 3249 0.1388 4100 0.1393 4092 0.1126 4533
80 0.1832 3250 0.1175 4100 0.1177 4096 0.09325 4542
85 0.161013250 0.0999 4100 0.0998924100 0.07757 4550
90 0.1421 3250 0.0853 4100 0.08513 4104 0.06482 4558
95 0.1258 3251 0.0732 4100 0.07286 4107 0.05440 4565
100 0.1118 3251 0.0630 4100 0.06260 4110 0.04584 4573
105 0.09960 3251 0.05451 4100 0.05400 4114 0.03879 4580
110 0.08903 3251 0.04731 4100 0.04675 4116 0.03295 4586
115 0.07981 3251 0.04121 4101 0.04063 4119 0.02810 4593
120 0.07175 3251 0.03602 4101 0.03543 4122 0.02405 4599
125 0.06468 3251 0.03159 4101 0.03099 4124 0.02066 4606
(21/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG16 Type
ELECTRICAL CHARACTERISTICS
RESISTANCE VS. TEMPERATURE CHARACTERISTICS TABLE (CONVERSION TABLE)
1B25/50: 3380±1%
2 B25/50: 4050±3%
Temp.(°C)
Resistance-temperature group
G H J
RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T)
–40 18.850 3140 35.340 3813
–35 14.429 3159 25.280 3822
–30 11.133 3176 18.330 3834
–25 8.656 3194 13.470 3848
–20 13.55 4371 6.779 3210 10.010 3864
–15 9.833 4398 5.346 3226 7.520 3882
–10 7.197 4424 4.245 3241 5.697 3900
–5 5.309 4449 3.393 3256 4.352 3919
0 3.947 4473 2.728 3270 3.349 3937
52.957 4496 2.207 3283 2.596 3956
10 2.232 4518 1.796 3296 2.026 3974
15 1.696 4539 1.470 3308 1.591 3989
20 1.298 4559 1.209 3320 1.258 4012
25 1.000 4577 1.000 3332 1.000 4024
30 0.7755 4596 0.831 3343 0.800 4036
35 0.6052 4614 0.694 3353 0.644 4049
40 0.4753 4630 0.583 3363 0.521 4062
45 0.3754 4646 0.491 3373 0.424 4074
50 0.2983 4661 0.416 33821
(3346 to 3414) 0.347 40852
(3928 to 4171)
55 0.2384 4676 0.354 3390 0.285 4096
60 0.1916 4690 0.302 3399 0.235 4106
65 0.1548 4703 0.259 3407 0.195 4115
70 0.1257 4716 0.223 3414 0.163 4126
75 0.1026 4728 0.192 3422 0.137 4134
80 0.08412 4739 0.167 3428 0.115 4142
85 0.06933 4750 0.145 3435 0.0971 4150
90 0.05740 4760 0.127 3441 0.0824 4158
95 0.04773 4770 0.111 3447 0.0702 4165
100 0.03987 4780 0.0975 3453 0.0601 4172
105 0.03344 4789 0.0860 3458 0.0515 4179
110 0.02817 4797 0.0760 3463 0.0444 4186
115 0.02382 4806 0.0674 3468 0.0384 4193
120 0.02022 4813 0.0599 3473 0.0333 4199
125 0.01723 4821 0.0534 3478 0.0289 4206
(22/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG16 Type (Narrow tolerance type products)
ELECTRICAL CHARACTERISTICS (Narrow tolerance type products)
CHARACTERISTICS SPECIFICATION TABLE
The products support narrow tolerance. The " " of the Part Number contains the nominal resistance tolerance, F (±1%), G (±2%), or H (±3%).
RESISTANCE vs. TEMPERATURE CHARACTERISTICS TABLE (CONVERSION TABLE)
1 B25/50: 3380±1%
2 B25/50: 4050±3%
Resistance-temperature group Part No.Nominal resistance value
[25°C]
B constant
[25/85°C] [25/50°C]
H NTCG163JF103 10k:± % 3435K±1% (3380K)
Temp.(°C)
Resistance-temperature group
H J K
RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T)
–40 18.850 3140 35.340 3813 42.510 4010
–35 14.429 3159 25.280 3822 30.049 4027
–30 11.133 3176 18.330 3834 21.489 4043
–25 8.656 3194 13.470 3848 15.538 4059
–20 6.779 3210 10.010 3864 11.353 4075
–15 5.346 3226 7.520 3882 8.378 4090
–10 4.245 3241 5.697 3900 6.241 4105
–5 3.393 3256 4.352 3919 4.691 4119
0 2.728 3270 3.349 3937 3.556 4133
52.207 3283 2.596 3956 2.718 4147
10 1.796 3296 2.026 3974 2.094 4160
15 1.470 3308 1.591 3989 1.625 4172
20 1.209 3320 1.258 4012 1.270 4185
25 1.000 3332 1.000 4024 1.000 4196
30 0.831 3343 0.800 4036 0.792 4208
35 0.694 3353 0.644 4049 0.632 4219
40 0.583 3363 0.521 4062 0.507 4230
45 0.491 3373 0.424 4074 0.409 4240
50 0.416 33821
(3346 to 3414) 0.347 40852
(3928 to 4171) 0.332 4250
55 0.354 3390 0.285 4096 0.271 4259
60 0.302 3399 0.235 4106 0.222 4269
65 0.259 3407 0.195 4115 0.183 4277
70 0.223 3414 0.163 4126 0.152 4286
75 0.192 3422 0.137 4134 0.126 4293
80 0.167 3428 0.115 4142 0.106 4301
85 0.145 3435 0.0971 4150 0.0889 4308
90 0.127 3441 0.0824 4158 0.0750 4315
95 0.111 3447 0.0702 4165 0.0636 4321
100 0.0975 3453 0.0601 4172 0.0541 4327
105 0.0860 3458 0.0515 4179 0.0462 4332
110 0.0760 3463 0.0444 4186 0.0397 4338
115 0.0674 3468 0.0384 4193 0.0342 4342
120 0.0599 3473 0.0333 4199 0.0295 4347
125 0.0534 3478 0.0289 4206 0.0256 4351
(23/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG16 Type
CHARACTERISTICS OF NTC THERMISTORS (EXAMPLE)
Y-axis: Linear Y-axis: Log.
–50 0 50
Temperature(˚C)
Resistance(kΩ)
100 150
0
20
40
60
80
100
120
140
160
180
200
–50 0 50
Temperature(˚C)
Resistance(kΩ)
100 150
0.1
1
10
100
1000
(24/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG series
NTCG20 Type
SHAPE & DIMENSIONS STRUCTURAL DIAGRAM
RECOMMENDED LAND PATTERN
Dimensions in mm
2±0.2
1.25±0.20.7±0.2
Electrode material
Internal:Pd
External:Ag/Ni/Sn
0.2 min.
Thermistor body
(Metal oxide sintering ceramics)
Inner electrode
(Palladium)
Sn plating
Ni plating
Ag termination
underlayer
0.9 to 1.2
0.9 to 1.2 0.7 to 0.90.7 to 0.9
(25/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG20 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
RESISTANCE vs. TEMPERATURE CHARACTERISTICS TABLE (CONVERSION TABLE)
Examples
1R25=R25/R25(1.000)u470=470:2R25=R25/R25(1.000)u3.3=3.3k:
R85=R85/R25(0.161)uR25(470:)=75.67:R85=R85/R25(0.156)uR25(3.3k:)=0.5148k:
Resistance-temperature group Part No.Nominal resistance value
[25°C]
B constant
[25/85°C] [25/50°C]
LNTCG203EH471J470:±5% 3250K±3% (3232K)
NTCG203EH681J680:±5% 3250K±3% (3232K)
MNTCG203BH102J1.0k:±5% 3100K±3% (3060K)
NTCG203BH152J1.5k:±5% 3100K±3% (3060K)
NNTCG203FH222J2.2k:±5% 3300K±3% (3248K)
NTCG203FH332J3.3k:±5% 3300K±3% (3248K)
PNTCG203JH472J4.7k:±5% 3450K±3% (3392K)
NTCG203JH682J6.8k:±5% 3450K±3% (3392K)
QNTCG203NH103J10k:±5% 3650K±3% (3590K)
NTCG203NH153J15k:±5% 3650K±3% (3590K)
RNTCG203SH223J22k:±5% 3850K±3% (3782K)
NTCG203SH333J33k:±5% 3850K±3% (3782K)
SNTCG204AH473J47k:±5% 4000K±3% (3931K)
NTCG204AH683J68k:±5% 4000K±3% (3931K)
TNTCG204CH104J100k:±5% 4150K±3% (4085K)
NTCG204CH154J150k:±5% 4150K±3% (4085K)
Temp.
(°C)
Resistance-temperature group
L M N P Q R S T
RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T) RT/R25 B(25/T)
–40 17.74 3076 15.18 2909 17.65 3070 19.80 3193 23.36 3370 27.76 3554 31.77 3699 35.34 3813
–35 13.62 3091 11.78 2919 13.52 3082 15.00 3205 17.42 3382 20.43 3570 23.02 3712 25.28 3822
–30 10.54 3105 9.217 2928 10.45 3094 11.47 3216 13.13 3394 15.18 3585 16.88 3725 18.33 3834
–25 8.226 3118 7.273 2936 8.150 3104 8.853 3227 9.994 3406 11.39 3599 12.50 3738 13.47 3848
–20 6.466 3131 5.786 2944 6.405 3115 6.894 3238 7.679 3419 8.618 3613 9.357 3751 10.01 3864
–15 5.119 3142 4.639 2953 5.073 3125 5.413 3249 5.952 3432 6.582 3626 7.070 3763 7.520 3882
–10 4.081 3152 3.746 2961 4.048 3134 4.283 3261 4.650 3445 5.073 3640 5.391 3777 5.697 3900
–5 3.277 3163 3.047 2969 3.254 3144 3.415 3273 3.661 3458 3.937 3652 4.147 3790 4.352 3919
0 2.647 3171 2.494 2977 2.633 3154 2.740 3284 2.903 3472 3.080 3665 3.215 3804 3.349 3937
52.153 3180 2.054 2985 2.145 3163 2.215 3297 2.317 3484 2.427 3677 2.511 3817 2.596 3956
10 1.762 3188 1.702 2993 1.757 3173 1.800 3307 1.862 3499 1.926 3690 1.975 3830 2.026 3974
15 1.450 3195 1.418 3000 1.449 3184 1.471 3319 1.505 3512 1.539 3702 1.564 3843 1.591 3989
20 1.201 3203 1.188 3011 1.200 3194 1.210 3329 1.223 3519 1.237 3715 1.247 3856 1.258 4012
25 1.00013207 1.000 3017 1.00023202 1.000 3339 1.000 3532 1.000 3727 1.000 3868 1.000 4024
30 0.837 3211 0.846 3023 0.837 3211 0.831 3350 0.822 3546 0.813 3738 0.807 3881 0.800 4036
35 0.704 3218 0.719 3031 0.704 3223 0.694 3361 0.679 3557 0.665 3748 0.654 3895 0.644 4049
40 0.596 3224 0.613 3046 0.595 3232 0.582 3372 0.564 3568 0.546 3762 0.534 3907 0.521 4062
45 0.506 3227 0.526 3047 0.505 3240 0.490 3383 0.470 3579 0.451 3772 0.438 3919 0.424 4074
50 0.432 3232 0.452 3060 0.430 3248 0.415 3392 0.394 3590 0.375 3782 0.361 3931 0.347 4085
55 0.371 3235 0.391 3062 0.369 3255 0.352 3402 0.332 3599 0.313 3793 0.299 3940 0.285 4096
60 0.320 3237 0.339 3070 0.316 3266 0.301 3411 0.280 3609 0.262 3803 0.249 3951 0.235 4106
65 0.276 3241 0.295 3077 0.273 3271 0.257 3420 0.238 3618 0.220 3813 0.208 3963 0.195 4115
70 0.240 3243 0.258 3080 0.236 3279 0.221 3427 0.203 3626 0.186 3823 0.174 3973 0.163 4126
75 0.209 3246 0.226 3087 0.205 3285 0.191 3436 0.174 3635 0.158 3832 0.147 3982 0.137 4134
80 0.183 3248 0.199 3091 0.179 3292 0.166 3443 0.149 3642 0.134 3841 0.124 3991 0.115 4142
85 0.16113250 0.175 3102 0.15623302 0.144 3451 0.129 3650 0.115 3850 0.106 4000 0.0971 4150
90 0.142 3252 0.155 3105 0.137 3308 0.126 3457 0.111 3657 0.0986 3858 0.0901 4008 0.0824 4158
95 0.126 3253 0.138 3106 0.121 3313 0.110 3461 0.0967 3663 0.0850 3866 0.0772 4016 0.0702 4165
100 0.111 3255 0.123 3109 0.107 3318 0.0966 3467 0.0842 3671 0.0734 3874 0.0664 4023 0.0601 4172
105 0.0992 3256 0.110 3111 0.0945 3324 0.0851 3472 0.0737 3675 0.0637 3881 0.0573 4030 0.0515 4179
110 0.0886 3257 0.0980 3122 0.0841 3327 0.0751 3479 0.0646 3682 0.0554 3888 0.0496 4036 0.0444 4186
115 0.0793 3258 0.0880 3125 0.0750 3331 0.0666 3484 0.0569 3686 0.0484 3895 0.0431 4042 0.0384 4193
120 0.0713 3259 0.0790 3132 0.0668 3339 0.0594 3485 0.0502 3691 0.0424 3901 0.0376 4047 0.0333 4199
125 0.0642 3260 0.0720 3123 0.0600 3340 0.0530 3487 0.0445 3695 0.0372 3906 0.0329 4053 0.0289 4206
(26/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG seriesNTCG20 Type
CHARACTERISTICS OF NTC THERMISTORS (EXAMPLE)
Y-axis: Linear Y-axis: Log.
–50 0 50
Temperature(˚C)
Resistance(kΩ)
100 150
0
20
40
60
80
100
120
140
160
180
200
–50 0 50
Temperature(˚C)
Resistance(kΩ)
100 150
0.1
1
10
100
1000
(27/27)
20150928 / tpd_ntc-thermistor_ntcg_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
Temperature Protection Devices
NTCG series
Packaging Style
REEL DIMENSIONS
TAPE DIMENSIONS
Dimensions in mm
Typ e A B P1 K
NTCG06 0.38±0.05 0.68±0.05 2±0.05 0.45max.
NTCG10 0.65+0.05/–0.1 1.15+0.05/–0.1 2±0.05 0.7max.
NTCG16 1.1±0.2 1.9±0.2 4±0.1 1.1max.
NTCG20 1.5±0.2 2.3±0.2 4±0.1 1.1max.
ø180±2.0
2.0±0.5
ø13±0.2
ø21±0.8
Dimensions in mm
1.0
ø60min.
14.4max.
8.4 +2.0
–0.0
4.0±0.12.0±0.05
B
A P1
8.0±0.3
1.75±0.1
3.5±0.05
K
1.5 +0.1
0
Dimensions in mm
160min. Taping 200min.
300min.
Drawing direction