CTVS - Ceramic transient voltage suppressors SMD multilayer varistor, ESD/EMI filter series Series/Type: Ordering code: CA04F2FT5AUD010G B72862F1050S160 Date: Version: 2017-10-11 5 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF. Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it! Identification/Classification 1 (header 1 + top left header bar): Identification/Classification 2 (header 2 + bottom left header bar): Ordering code: (top right header bar) Series/Type: (top right header bar) Preliminary data (optional): Department: Date: Version: Prepared by: Release signed PD: Release signed QS: Modifications/Remarks: CTVS - Ceramic transient voltage suppressors SMD multilayer varistor, ESD/EMI filter series B72862F1050S160 CA04F2FT5AUD010G PPD ML PD 2017-10-11 5 Dr. Hofstatter Hr. Konrad Dr. Pecina Correction of d2 based on the Product Audit EPCOS AG 2017. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. CTVS - Ceramic transient voltage suppressors SMD multilayer varistor, ESD/EMI filter series B72862F1050S160 CA04F2FT5AUD010G ESD/EMI 0405 audio filter Description Today's electronic devices are more and more sensitive to electrostatic discharges (ESD) and electromagnetic interference (EMI). Therefore reliable protection components become absolutely necessary in order to meet enhanced EMC standards. The ESD/EMI 0405 Audio Filter has the benefit to offer two different functions in one component. It efficiently attenuates noise between 800 - 3000 MHz from the signal lines generated by electromagnetic interference of the frequency carrier bands of a mobile phone. Additionally it protects the circuit from the impact of ESD. The functionality of up to 10 discrete components was integrated in one component in a small size 0405. The novel feed trough design with common ground electrodes benefits in an easy PCB layout. Features * * * * * * * * High attenuation in a wide frequency range covering GSM, UMTS, GPRS, WLAN and Bluetooth and GPS ESD robustness according to IEC 61000-4-2 level 4 on input and output ports Up to 20 components integrated in one package Low DC leakage currents Bi-directional protection Low inductance due to common ground contacts High frequency stability versus temperature RoHS-compatible PPD ML PD Please read Cautions and warnings and Important notes at the end of this document. 2017-10-11 Page 2 of 13 CTVS - Ceramic transient voltage suppressors SMD multilayer varistor, ESD/EMI filter series B72862F1050S160 CA04F2FT5AUD010G Applications Reliable ESD/EMI filtering of audio lines (2-fold array), LCD module interface and camera sensor lines (4-fold array) in mobile phones, PDA's, notebooks. Example: ESD/EMI filtering of audio speaker lines in mobile phones Pin configuration Pin Description P1 I/O Line 1 P2 I/O Line 2 P3 I/O Line 1 P4 I/O Line 2 P5 GND P6 GND Due to the symmetrical configuration no marking information is needed. P1 and P3, P2 and P4 can be interchanged. Maximum ratings (TA = +85 C) Rating Symbol Value Unit Maximum DC operating voltage VDC,max 5 V Air discharge ESD capability (to IEC 61000-4-2 method) VESD,air 15 kV Contact discharge ESD capability (to IEC 61000-4-2 method) VESD,contact 8 kV Operating temperature (without derating) Top -40 ... +85 C Storage temperature Tstg -40 ... +125 C PPD ML PD Please read Cautions and warnings and Important notes at the end of this document. 2017-10-11 Page 3 of 13 CTVS - Ceramic transient voltage suppressors SMD multilayer varistor, ESD/EMI filter series B72862F1050S160 CA04F2FT5AUD010G Characteristics (TA = +25 C) Parameter Symbol Conditions Minimum Typical Maximum Unit Varistor voltage VV IV = 1 mA 8 10 - V DC leakage current Ileak Vleak = 3 V - 0.05 1 A Capacitance Cline=C1+C2 V = 0.5 V, f = 1 MHz 189 270 351 V DC resistance Rs - 0.2 - - - 0.5 ns Response time Temperature derating PPD ML PD Please read Cautions and warnings and Important notes at the end of this document. 2017-10-11 Page 4 of 13 CTVS - Ceramic transient voltage suppressors SMD multilayer varistor, ESD/EMI filter series B72862F1050S160 CA04F2FT5AUD010G Filtering characteristics Ordering code Capacitance DC resistance 1 MHz, 0.5 V DC B72862F1050S160 Cut-off frequency Resonance frequency -20 dB attenuation band -3 dB typical typical 30% Typ. 50 , Bias = 0 V 50 , Bias = 0 V 50 , Bias = 0 V pF Ohm MHz MHz MHz 900 200 ... 4000 270 0.2 Min. Typ. 10 25 Typical s-parameters Measurement setup: Network analyzer HP8573D with 50 impedance reference. Calibration procedure with full 4 port S-O-L-T in fixture cal kit. Measurement test boards are available upon request. In Out 50 50 PPD ML PD Please read Cautions and warnings and Important notes at the end of this document. 2017-10-11 Page 5 of 13 CTVS - Ceramic transient voltage suppressors SMD multilayer varistor, ESD/EMI filter series B72862F1050S160 CA04F2FT5AUD010G Equivalent circuit Dimensional drawing in mm Case size 0405 Symbol Dimensions mm Tolerance l 1.37 0.15 w 1.00 +0/-0.15 h 0.65 Max. e 0.64 Ref. d1 0.36 0.1 k1 0.20 0.1 d2 0.36 0.15 k2 0.20 0.15 PPD ML PD Please read Cautions and warnings and Important notes at the end of this document. 2017-10-11 Page 6 of 13 CTVS - Ceramic transient voltage suppressors SMD multilayer varistor, ESD/EMI filter series B72862F1050S160 CA04F2FT5AUD010G Recommended solder pad layout A = 0.4 mm B = 0.55 mm C = 1.04 mm D = 0.6 mm E = 0.7 mm F = 1.7 mm G=H = 0.4 mm I = 0.64 mm PPD ML PD Please read Cautions and warnings and Important notes at the end of this document. 2017-10-11 Page 7 of 13 CTVS - Ceramic transient voltage suppressors SMD multilayer varistor, ESD/EMI filter series B72862F1050S160 CA04F2FT5AUD010G Recommended soldering temperature profiles Reflow soldering temperature profile Profile feature Sn-Pb eutectic assembly Pb-free assembly Average ramp-up rate (TSmax to Tp) +3 C/ second max. +3 C/ second max. Preheat - Temperature min (TSmin) - Temperature max (TSmax) - Time (tSmin to tSmax) +100 C +150 C 60 ... 120 seconds +150 C +200 C 60 ... 180 seconds Time maintained above - Temperature min (TL) - Time (tL) +183 C 60 ... 150 seconds +217 C 60 ... 150 seconds Peak classification temperature (Tp) +220 C ... +240 C +240 C ... +260 C Time within 5 C of actual peak temperature (tp) 10 ... 30 seconds 20 ... 40 seconds Ramp-down rate -6 C/ second max. -6 C/ second max. Time +25 C to peak temperature 6 minutes max. 8 minutes max. Notes: All temperatures refer to topside of the package, measured on the package body surface. Max. number of reflow cycles: 3 Soldering guidelines The usage of mild, non-activated fluxes for soldering is recommended, as well as proper cleaning of the PCB. The components are suitable for reflow soldering to JEDEC J-STD-020D. PPD ML PD Please read Cautions and warnings and Important notes at the end of this document. 2017-10-11 Page 8 of 13 CTVS - Ceramic transient voltage suppressors SMD multilayer varistor, ESD/EMI filter series B72862F1050S160 CA04F2FT5AUD010G Taping and packaging Tape and reel packing according to IEC 60286-3 Tape material: Cardboard Case size 0405 Definition Symbol in mm Tolerance Tape width W 8.00 0.3 Packing Packing material: Plastic Reel dimensions Definition Symbol Dimensions mm Tolerance mm Reel diameter A 180 +0/-3 Reel width (inside) W1 8.4 +1.5/-0 Reel width (outside) W2 14.4 max. Packing units Type Ordering code Case size Qty. per reel Reel size CA04F2FT5AUD010G B72862F1050S160 0405 5000 180 mm PPD ML PD Please read Cautions and warnings and Important notes at the end of this document. 2017-10-11 Page 9 of 13 CTVS - Ceramic transient voltage suppressors SMD multilayer varistor, ESD/EMI filter series B72862F1050S160 CA04F2FT5AUD010G Cautions and warnings General Some parts of this publication contain statements about the suitability of our ceramic transient voltage suppressor (CTVS) components (multilayer varistors (MLVs)), CeraDiodes, ESD/EMI filters, leaded transient voltage/ RFI suppressors (SHCV types)) for certain areas of application, including recommendations about incorporation/design-in of these products into customer applications. The statements are based on our knowledge of typical requirements often made of our CTVS devices in the particular areas. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our CTVS components for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always incumbent on the customer to check and decide whether the CTVS devices with the properties described in the product specification are suitable for use in a particular customer application. * * * Do not use EPCOS CTVS components for purposes not identified in our specifications, application notes and data books. Ensure the suitability of a CTVS in particular by testing it for reliability during design-in. Always evaluate a CTVS component under worst-case conditions. Pay special attention to the reliability of CTVS devices intended for use in safety-critical applications (e.g. medical equipment, automotive, spacecraft, nuclear power plant). Design notes * * * * * * * Always connect a CTVS in parallel with the electronic circuit to be protected. Consider maximum rated power dissipation if a CTVS has insufficient time to cool down between a number of pulses occurring within a specified isolated time period. Ensure that electrical characteristics do not degrade. Consider derating at higher operating temperatures. Choose the highest voltage class compatible with derating at higher temperatures. Surge currents beyond specified values will puncture a CTVS. In extreme cases a CTVS will burst. If steep surge current edges are to be expected, make sure your design is as low-inductance as possible. In some cases the malfunctioning of passive electronic components or failure before the end of their service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In applications requiring a very high level of operational safety and especially when the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention, life-saving systems, or automotive battery line applications such as clamp 30), ensure by suitable design of the application or other measures (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of such a malfunction or failure. Only use CTVS components from the automotive series in safety-relevant applications. Specified values only apply to CTVS components that have not been subject to prior electrical, mechanical or thermal damage. The use of CTVS devices in line-to-ground applications is therefore not advisable, and it is only allowed together with safety countermeasures like thermal fuses. PPD ML PD Please read Cautions and warnings and Important notes at the end of this document. 2017-10-11 Page 10 of 13 CTVS - Ceramic transient voltage suppressors SMD multilayer varistor, ESD/EMI filter series B72862F1050S160 CA04F2FT5AUD010G Storage * * * * * * * Only store CTVS in their original packaging. Do not open the package before storage. Storage conditions in original packaging: temperature 25 to +45C, relative humidity d75% annual average, maximum 95%, dew precipitation is inadmissible. Do not store CTVS devices where they are exposed to heat or direct sunlight. Otherwise the packaging material may be deformed or CTVS may stick together, causing problems during mounting. Avoid contamination of the CTVS surface during storage, handling and processing. Avoid storing CTVS devices in harmful environments where they are exposed to corrosive gases for example (SOx, Cl). Use CTVS as soon as possible after opening factory seals such as polyvinyl-sealed packages. Solder CTVS components after shipment from EPCOS within the time specified: o CTVS with Ni barrier termination, 12 months o CTVS with AgPt termination, 6 months o SHCV 24 months Handling * * * * Do not drop CTVS components and allow them to be chipped. Do not touch CTVS with your bare hands - gloves are recommended. Avoid contamination of the CTVS surface during handling. Washing processes may damage the product due to the possible static or cyclic mechanical loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts, which might lead to reduced reliability or lifetime. Mounting * * * * * When CTVS devices are encapsulated with sealing material or overmolded with plastic material, electrical characteristics might be degraded and the life time reduced. Make sure an electrode is not scratched before, during or after the mounting process. Make sure contacts and housings used for assembly with CTVS components are clean before mounting. The surface temperature of an operating CTVS can be higher. Ensure that adjacent components are placed at a sufficient distance from a CTVS to allow proper cooling. Avoid contamination of the CTVS surface during processing. Soldering * * * * Complete removal of flux is recommended to avoid surface contamination that can result in an instable and/or high leakage current. Use resin-type or non-activated flux. Bear in mind that insufficient preheating may cause ceramic cracks. Rapid cooling by dipping in solvent is not recommended, otherwise a component may crack. PPD ML PD Please read Cautions and warnings and Important notes at the end of this document. 2017-10-11 Page 11 of 13 CTVS - Ceramic transient voltage suppressors SMD multilayer varistor, ESD/EMI filter series B72862F1050S160 CA04F2FT5AUD010G Operation * * * * * * * Use CTVS only within the specified operating temperature range. Use CTVS only within specified voltage and current ranges. Environmental conditions must not harm a CTVS. Only use them in normal atmospheric conditions. Reducing the atmosphere (e.g. hydrogen or nitrogen atmosphere) is prohibited. Prevent a CTVS from contacting liquids and solvents. Make sure that no water enters a CTVS (e.g. through plug terminals). Avoid dewing and condensation. EPCOS CTVS components are mainly designed for encased applications. Under all circumstances avoid exposure to: o direct sunlight o rain or condensation o steam, saline spray o corrosive gases o atmosphere with reduced oxygen content EPCOS CTVS devices are not suitable for switching applications or voltage stabilization where static power dissipation is required. This listing does not claim to be complete, but merely reflects the experience of EPCOS AG. Display of ordering codes for EPCOS products The ordering code for one and the same EPCOS product can be represented differently in data sheets, data books, other publications, on the EPCOS website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes PPD ML PD Please read Cautions and warnings and Important notes at the end of this document. 2017-10-11 Page 12 of 13 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 13 of 13 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: EPCOS / TDK: B72862F1050S160 B72499C9999D99