RC Series Stackpole Electronics, Inc. Carbon Composition Resistor * * * * Features: Resistive Product Solutions Non-inductive design Molded body for package uniformity Ideal for pulse-load handling characteristics RoHS compliant / lead-free Electrical Specifications Type / Code Maximum Continuous Power Rating (Watts) @ 70C Working Voltage (1) Maximum Pulse Voltage Dielectric Withstanding Voltage RC14 0.25W 250V 400V 500V RC12 0.5W 350V 700V 700V Ohmic Range () and Tolerance 5% 10% 2.2 - 5.6M 1 - 5.6M 1 - 22M (1) Lesser of PR or maximum working voltage. Mechanical Specifications Type / Code A Body Length B Body Diameter C Lead Length (Bulk) RC14 0.248 0.028 6.30 0.70 0.094 0.004 2.40 0.10 1.181 0.118 30.00 3.00 0.024 0.002 0.60 0.05 inches mm RC12 0.374 0.031 9.50 0.80 0.142 0.008 3.60 0.20 1.102 0.118 28.00 3.00 0.028 0.003 0.70 0.07 inches mm Power Derating Curve: Percent Rated Power (%) 100 -55C D Lead Diameter Unit 70C 80 60 40 20 125C 0 -60 0 20 40 60 80 100 120 140 Ambient Temperature (C) Rev Date: 03/08/2017 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 1 www.seielect.com marketing@seielect.com RC Series Stackpole Electronics, Inc. Carbon Composition Resistor Resistive Product Solutions Resistance Temperature Characteristics Resistance Range -55C +105C Under 1K +2 to + 5 -4 to -2 1K to 9.1K +5 to +9 -5 to -3 10K to 91K +8 to +11 -7 to -5 100K to 910K +10 to +14 -9 to -7 1M to 10M +13 to +20 -14 to -9 Maximum % resistance change from room temperature (+25C) value Performance Characteristics (JISC 5201 - 1:1998) Test Test Results Test Method Voltage Proof No breakdown or flashover V-block method RC 1/4 100 VAC, 60 seconds RC 1/2 500 VAC, 60 seconds 2.5 times the rated voltage or twice the limiting element voltage, whichever is less. Severe, 5 seconds. 2% +0.05 No visible damage, legible markings Tensile: 2% +0.05. No visible damage 10N for 5 - 10 seconds Termination Strength Bending: 2% +0.05. No visible damage 5N, twice Torsion: 2% +0.05. No visible damage 180C, two rotations Solderability In accordance with Clause 4.17.4.5 235C, 5 seconds After immersion into flux, the immersion into solder shall be carried 3% +0.05 Resistance to Soldering Heat out 4mm from the body at 350C for 3.5 seconds No visible damage, legible markings 2% +0.05 Temperature Shock 5 cycles between -55C to 125C No visible damage. Dry/Damp heat: 12 +12 hour cycle, first cycle Climatic Sequence 10% +0.5 Cold/Damp heat: 12 + 12 hour cycle, remaining cycle D.C. load 10% +0.5 40C 95% relative humidity for 56 days, Damp Test, Steady State Insulation resistance: R 100M ohm. test a, b and c of Clause 4.24.2.1 No visible damage, legible markings 10% +0.5 Endurance @ 70C Rated voltage, 1.5 hours ON, 0.5 hours OFF at 70C, 1,000 hours Insulation resistance: R 1G ohm. No visible damage. 10% +0.5 Endurance @ 125C 125C, no load, 1,000 hours Insulation resistance: R 1G ohm. No visible damage. Operating Temperature Range: -55C to +125C Overload Reliability Test - Load Life in Moisture Criteria (%) R/R Total Testing Time (Hrs) Number of Fractures (pcs) 0 2.984 x 106 6 0.201 0.244 4.098 x 105 20 6 2.990 x 10 4 0.134 0.176 5.682 x 105 60 2.997 x 106 2 0.067 0.104 9.615 x 105 100 2.992 x 106 3 0.1 0.139 7.194 x 105 5 10 Failure Ratio CL (60%) Load Ratio P/Pn (%) 7 Average Lifetime (60% reliability level) (Hrs) Total 1.196 x 10 15 0.125 0.138 7.209 x 105 Total 1.2 x 107 0 0.0055 0.0077 1.299 x 107 Rev Date: 03/08/2017 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 2 www.seielect.com marketing@seielect.com RC Series Stackpole Electronics, Inc. Carbon Composition Resistor Resistive Product Solutions Hot Spot Temperature Single Pulse Power Capability Rev Date: 03/08/2017 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 3 www.seielect.com marketing@seielect.com RC Series Stackpole Electronics, Inc. Carbon Composition Resistor Resistive Product Solutions Continuous Pulse Circuit 100 Pulse Data E: 10kV; C1: 1000pF; R1: 1K; R2: 4M; X: Sample: RS: 15M; 100 times pulse. Continuous Pulse Capability Rev Date: 03/08/2017 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 4 www.seielect.com marketing@seielect.com RC Series Stackpole Electronics, Inc. Carbon Composition Resistor Resistive Product Solutions Impedance x Frequency Equipment: HP4291A Impedance/Material Analyzer Rev Date: 03/08/2017 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 5 www.seielect.com marketing@seielect.com RC Series Stackpole Electronics, Inc. Carbon Composition Resistor Resistive Product Solutions Current Noise Current Noise Data (Q.T.L.) Packaging Specifications Type / Code A max.(1) B max C D(2) Tape Unit RC14 2.787 70.80 13.504 343.00 0.394 0.020 10.00 0.50 2.063 0.079 52.40 2.00 0.250 6.35 inches mm RC12 2.756 70.00 13.504 343.00 0.394 0.020 10.00 0.50 2.063 0.079 52.40 2.00 0.250 6.35 inches mm Rev Date: 03/08/2017 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 6 www.seielect.com marketing@seielect.com RC Series Stackpole Electronics, Inc. Carbon Composition Resistor Resistive Product Solutions Technical Guide: 1. Storage Conditions: Temperature: 5 to 35C (40 to 95F) Humidity: 25 - 60% relative humidity Term: One year in poly-bag with desiccant. If parts are removed from the poly-bag, they should be used immediately or resealed in the bag. Environment: Clean, dry environment, free of corrosive gases 2. Application precautions: Lead forming: Forming is recommended at least 2mm of farther from the base of the lead Soldering: Soldering is recommended at least 4mm or farther from the base of the lead 3. Washing: Carbon composition resistors are highly hygroscopic and changes in resistance value can occur if too much moisture is absorbed. For this reason it is recommended not to use water or water-soluble solvents to clean these components. Alcohol or hydrocarbon solvents are recommended for rinsing. 4. Soldering Recommendations: Note: The conditions shown below are for reference. Please perform a mounting evaluation to assure compatibility. a. Flow soldering (recommended profile for Sn and Sn/Pb solders) b. Soldering iron (recommended for Sn and Sn/Pb solders) Temperature of soldering tip: 300C, duration: 10 sec. max. Temperature of soldering tip: 350C, duration: 3 sec. max. Other: 1. Evaluate and confirm the compatibility of your assembly process with this product. 2. Refer to the catalog, the product news, and the specifications for details on the RC series resistors. 3. If you have any questions, please contact our sales staff. Rev Date: 03/08/2017 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 7 www.seielect.com marketing@seielect.com RC Series Stackpole Electronics, Inc. Carbon Composition Resistor Resistive Product Solutions Surface Temperature / Impressing Electric Power RC14 200K 5% (Rated Power: 0.25W) Test Method Details Item Tested Characteristics Tested Results and Measure Condition Test Method Details Fixed carbon composition resistors (200K) Surface temperature of the product / Impressing electric power It refers to the following data. Characteristic Data Impressing Electric Power (W) 0.125 0.250 0.375 Surface Temperature (C) 40.7 53.6 66.8 Measurement Condition: Rev Date: 03/08/2017 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 8 www.seielect.com marketing@seielect.com RC Series Stackpole Electronics, Inc. Carbon Composition Resistor Resistive Product Solutions Surface Temperature / Impressing Electric Power RC12 330K 5% (Rated Power: 0.5W) Test Method Details Item Tested Characteristics Tested Results and Measure Condition Test Method Details Fixed carbon composition resistors (330K) Surface temperature of the product / Impressing electric power It refers to the following data. Characteristic Data Surface Temperature (C) 52.3 68.5 85.6 Impressing Electric Power (W) 0.25 0.50 0.75 Measurement Condition: Rev Date: 03/08/2017 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 9 www.seielect.com marketing@seielect.com RC Series Stackpole Electronics, Inc. Carbon Composition Resistor Resistive Product Solutions RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various regulatory requirements now prevalent, such as the European Union's directive regarding "Restrictions on Hazardous Substances" (RoHS 2). As part of this ongoing program, we periodically update this document with the status regarding the availability of our compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament. RoHS Compliance Status Standard Product Series Description Package / Termination Type Standard Series RoHS Compliant Lead-Free Termination Composition Lead-Free Mfg. Effective Date (Std Product Series) Lead-Free Effective Date Code (YY/WW) RC Carbon Composition Leaded Resistor Axial YES 100% Matte Sn Jan-86 86/01 "Conflict Metals" Commitment We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined in the "conflict region" of the Eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals. Compliance to "REACH" We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, "The Registration, Evaluation, Authorization and Restriction of Chemicals", otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List. Environmental Policy It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution. How to Order RC 1 2 3 4 5 6 7 8 9 10 R C 1 2 J T 5 M 6 0 Product Series Carbon Comp Size Power Rating 14 0.25W 12 0.5W Code J K Tolerance Tol Value 5% E24 10% Code T B Packaging Description Size Tape and Reel All Sizes Bulk All Sizes Resistance Value Quantity 5,000 1,000 Four characters with the multiplier used as the decimal holder. 1 ohm = 1R00 10 Kohm = 10K0 1 Mohm = 1M00 Rev Date: 03/08/2017 This specification may be changed at any time without prior notice Please confirm technical specifications before you order and/or use. 10 www.seielect.com marketing@seielect.com