Rev Date: 03/08/2017 1 www.seielect.com
This speci fication ma y be cha ng ed at a ny time without prior notic e marketing@seielect.com
Please confirm technical specifications before you order and/or use.
RC Series
Carbon Composition Resistor
Stackpole Electronics, I nc.
Resistive Product Solutions
0
Ambient Temperature (ºC)
125ºC
-60
0
20
40
60
80
100
120
140
Percent Rated Power (%)
100
-55ºC
70ºC
0.248 ±0.028 0.094 ±0.004 1.181 ±0.118 0.024 ±0.002 inches
6.30 ±0.70 2.40 ±0.10 30.00 ±3.00 0.60 ±0.05 mm
0.374 ±0.031 0.142 ±0.008 1.102 ±0.118 0.028 ±0.003 inches
9.50 ±0.80 3.60 ±0.20 28.00 ±3.00 0.70 ±0.07 mm
RC14
RC12
Unit
Body Length
Body D iameter
Lead Length (B ulk)
Lead Diameter
Ty pe / Code
A
B
C
D
Features:
`
Power Derating Curve:
Non-inductive design
Molded body for package uniformity
Ideal for pulse-load handling characteristics
RoHS compliant / lead-free
Electrical Specifications
Mechanic al Spec ifications
Maximum
Continuous
Working Voltage
(1)
RC14 0.25W 250V 400V 500V
RC12 0.5W 350V 700V 700V
(1) Lesser of √PR or maximum working voltage.
2.2 - 5.6M
1 - 5.6M
1 - 22M
10%
Ohmic Range (Ω) and Tolerance
Type / Code
Power Rating
(Watts) @ 70ºC
Maximum
Pulse Voltage
Dielectric Withstanding
Voltage
5%
Rev Date: 03/08/2017 2 www.seielect.com
This speci fication ma y be cha ng ed at a ny time without prior notic e marketing@seielect.com
Please confirm technical specifications before you order and/or use.
RC Series
Carbon Composition Resistor
Stackpole Electronics, I nc.
Resistive Product Solutions
Under 1K +2 to + 5 -4 to -2
1K to 9.1K +5 to +9 -5 to -3
10K to 91K +8 to +11 -7 to -5
100K to 910K +10 to +14 -9 to -7
1M to 10M +13 to +20 -14 to -9
Maximum % resistance change from
room temperature (+25ºC) value
Resistance Range
-55ºC
+105ºC
Test Test Results Test Method
V-block method RC 1/4 100 VAC, 60 seconds
RC 1/2 500 VAC, 60 seconds
±2% +0.05Ω
No visible damage, legible markings
Tensile: ±2% +0.05Ω. No visible damage 10N for 5 - 10 seconds
Bending: ±2% +0.05Ω. No visible damage 5N, twice
Torsion: ±2% +0.05Ω. No visible damage 180ºC, two rotations
Solderability In accordance with Clause 4.17.4.5 235ºC, 5 seconds
±3% +0.05Ω
No visible damage, legible markings
±2% +0.05Ω
No visible damage.
±10% +0.5Ω
Insulation resistance: R 100M ohm.
No visible damage, legible markings
±10% +0.5Ω
Insulation resistance: R ≥1G ohm.
No visible damage.
±10% +0.5Ω
Insulation resistance: R ≥1G ohm.
No visible damage.
Operating Temperature Range: -55ºC to +125ºC
Endurance @ 70ºC
Rated voltage, 1.5 hours ON, 0.5 hours OFF at 70ºC, 1,000 hours
Endurance @ 125ºC
125ºC, no load, 1,000 hours
Climatic Sequence
±10% +0.5Ω
Dry/Damp heat: 12 +12 hour cycle, first cycle
Cold/Damp heat: 12 + 12 hour cycle, remaining cycle D.C. load
40ºC 95% relative humidity for 56 days,
test a, b and c of Clause 4.24.2.1
Damp Test, Steady State
Termination Strength
After immersion into flux, the immersion into solder shall be carried
out 4mm from the body at 350ºC for 3.5 seconds
Resistance to Soldering
Heat
Temperature Shock
5 cycles between -55ºC to 125ºC
Voltage Proof
No breakdown or flashover
2.5 times the rated voltage or twice the limiting element voltage,
whichever is less. Severe, 5 seconds.
Overload
Load Ratio Total Testing Number of Average Lifetime
P/Pn (%) Time (Hrs) Fractures (pcs) ƛ ƛCL (60%) (60% reliability level) (Hrs)
02.984 x 10
6
60.201 0.244 4.098 x 10
5
20 2.990 x 10
6
40.134 0.176 5.682 x 10
5
60 2.997 x 10
6
20.067 0.104 9.615 x 10
5
100 2.992 x 10
6
30.1 0.139 7.194 x 10
5
Total 1.196 x 10
7
15 0.125 0.138 7.209 x 10
5
±10 Total 1.2 x 10
7
00.0055 0.0077 1.299 x 10
7
R/R
Criteria (%)
Failure Ratio
±5
Resist ance T em per a tu r e Char acter i st ic s
Performance Characteristics (JISC 5201 - 1:1998)
Reliabilit y Test Load Life in Moisture
Rev Date: 03/08/2017 3 www.seielect.com
This speci fication ma y be cha ng ed at a ny time without prior notic e marketing@seielect.com
Please confirm technical specifications before you order and/or use.
RC Series
Carbon Composition Resistor
Stackpole Electronics, I nc.
Resistive Product Solutions
Hot Spot Temper ature
Single Pulse Power Capability
Rev Date: 03/08/2017 4 www.seielect.com
This speci fication ma y be cha ng ed at a ny time without prior notic e marketing@seielect.com
Please confirm technical specifications before you order and/or use.
RC Series
Carbon Composition Resistor
Stackpole Electronics, I nc.
Resistive Product Solutions
Continu ous P uls e Cir cuit
100 Pulse Data
E: 10kV; C1: 1000pF; R1: 1KΩ; R2: 4MΩ; X: Sample: RS: 15MΩ; 100 times pulse.
Continu ous P uls e Ca p abi li ty
Rev Date: 03/08/2017 5 www.seielect.com
This speci fication ma y be cha ng ed at a ny time without prior notic e marketing@seielect.com
Please confirm technical specifications before you order and/or use.
RC Series
Carbon Composition Resistor
Stackpole Electronics, I nc.
Resistive Product Solutions
Equipment: HP4291A Impedance/Material Analyzer
Impedance x Frequency
Rev Date: 03/08/2017 6 www.seielect.com
This speci fication ma y be cha ng ed at a ny time without prior notic e marketing@seielect.com
Please confirm technical specifications before you order and/or use.
RC Series
Carbon Composition Resistor
Stackpole Electronics, I nc.
Resistive Product Solutions
Current Noise
Current Noise Data (Q.T.L.)
Packaging Specifications
Type / Code Tape Unit
0.394 ±0.020 2.063 ±0.079 0.250 inches
10.00 ±0.50 52.40 ±2.00 6.35 mm
0.394 ±0.020 2.063 ±0.079 0.250 inches
10.00 ±0.50 52.40 ±2.00 6.35 mm
70.80
343.00
RC12
2.756
13.504
70.00
343.00
RC14
C
D
(2)
2.787
13.504
A max
.(1)
B max
Rev Date: 03/08/2017 7 www.seielect.com
This speci fication ma y be cha ng ed at a ny time without prior notic e marketing@seielect.com
Please confirm technical specifications before you order and/or use.
RC Series
Carbon Composition Resistor
Stackpole Electronics, I nc.
Resistive Product Solutions
Technical Guide:
1. Storage Conditions:
Temperature: 5 to 35ºC (40 to 95ºF)
Humidity: 25 60% relative humidity
Term: One year in poly-bag with des ic cant. If parts are removed from the poly-bag,
they should be used immediately or resealed in the bag.
Environment: Clean, dry environment, free of corrosive gases
2. Application precautions:
Lead forming: Forming is recommended at least 2mm of farther from the base of the lead
Soldering: Soldering is recommended at least 4mm or farther from the base of the lead
3. Washing:
Carbon composition resistors are highly hygroscopic and changes in resistance value can occur if too much
moisture is absorbed. For this reason it is recommended not to use water or water-soluble solvents to clean these
components. Alcohol or hydrocarbon solvents are recommended for rinsing.
4. Soldering Recommendations:
Note: T he c o nd iti ons sho wn belo w are for reference. Ple as e perf orm a mountin g e valuation to as sur e c ompatibilit y.
a. Flow soldering (recommended profile for Sn and Sn/Pb solders)
b. Soldering iron (recommended for Sn and Sn/Pb solders)
Temperature of soldering tip: 300ºC, duration: 10 sec. max.
Temperature of soldering tip: 350ºC, duration: 3 sec. max.
Other:
1. Evaluate and confirm the compatibility of your assembly process with this product.
2. Refer to the catalog, the product news, and the specifications for details on the RC series resistors.
3. If you have any questions, please contact our sales staff.
Rev Date: 03/08/2017 8 www.seielect.com
This speci fication ma y be cha ng ed at a ny time without prior notic e marketing@seielect.com
Please confirm technical specifications before you order and/or use.
RC Series
Carbon Composition Resistor
Stackpole Electronics, I nc.
Resistive Product Solutions
Surface Temperature / Impressing Electric Power
RC14 200KΩ ±5% (Rated Power: 0.25W)
Measurement Condition:
Test Method Details
I t em Tested Fixed carbon composition resistors (200KΩ)
Character ist ics Test ed Surfac e t emperat ur e of the pr oduct / Impres sing electr ic pow er
Results and Meas ur e Condition I t r ef er s t o t he f ollow ing dat a.
Test M et hod Det ails
Characteristic Data
I mpressing Electr ic Pow er ( W) Surfac e Temper at ur e ( ° C)
0.125 40.7
0.250 53.6
0.375 66.8
Rev Date: 03/08/2017 9 www.seielect.com
This speci fication ma y be cha ng ed at a ny time without prior notic e marketing@seielect.com
Please confirm technical specifications before you order and/or use.
RC Series
Carbon Composition Resistor
Stackpole Electronics, I nc.
Resistive Product Solutions
Surface Temperature / Impressing Electric Power
RC12 330KΩ ±5% (Rated Power: 0.5W)
Measurement Condition:
Test Method Details
I t em Tested Fixed carbon composition resistors (330KΩ)
Character ist ics Test ed Surfac e t emperat ur e of the pr oduct / Impres sing electr ic pow er
Results and Meas ur e Condition I t r ef er s t o t he f ollow ing dat a.
Test M et hod Det ails
Characteristic Data
I mpressing Electr ic Pow er ( W) Surfac e Temper at ur e ( ° C)
0.25 52.3
0.50 68.5
0.75 85.6
Rev Date: 03/08/2017 10 www.seielect.com
This speci fication ma y be cha ng ed at a ny time without prior notic e marketing@seielect.com
Please confirm technical specifications before you order and/or use.
RC Series
Carbon Composition Resistor
Stackpole Electronics, I nc.
Resistive Product Solutions
12345678910
R C 1 2 J T 5 M 6 0
Size
RC 14 Code Quantity
12 J
5,000
K
1,000
0.25W
All Sizes
Carbon Comp
Tape and Reel
All Sizes
0.5W
Code
T
B
Tol
5%
10%
Value
E24
10 Kohm = 10K0
1 Mohm = 1M 00
Product Series
Power Rat ing
Resistance Value
Packaging
Tolerance
1 ohm = 1R00
Description
Size
Four charact er s w it h
the multiplier us ed as
the decimal holder.
Bulk
RoHS Comp liance
Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to
meet t he vari ous r egu lat or y r equirements no w pre va le nt, s uch as the Eur o pea n U nio n’s d ir ect ive r eg ardi ng “Restr ictio ns
on Hazardous Substances” (RoHS 2). As part of this ongoing program, we periodicall y update this docum ent with the
status regarding the availability of our compliant components. All our standard part numbers are compliant to EU
Directive 2011/65/EU of the European Parliament.
“Conflict Metals” Commitment
W e at Stack pole Elec tronics, Inc . ar e joined with our i n dust r y in opp osing t he us e of m etals m ined in the “c on f lict r egion”
of the Eas tern Dem ocratic Repu blic of the Cong o (DRC) in o ur products . Recognizin g that the suppl y chain f or metals
used in th e electronics industr y is very com plex, we work closely with our o wn suppliers to verify to the extent possib le
that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in
compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals.
Comp lian c e to “REACH”
We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High
Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, “The Registration, Evaluation,
Authorization and Restriction of Chemicals”, otherwise referred to as REACH. Contact us for complete list of REACH
Substance Candidate List.
Environmental Policy
It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We
continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding
the protection of our environment and all requests related to the environment to which we have agreed. We are
committed to the prevention of all forms of pollution.
How to Order
RoHS Compliance Status
RC
Carbon Composition Leaded Resistor Axial YES 100% M at te Sn Jan-86 86/01
Lead-Fr ee
Mfg. Effective Date
(St d Product Series)
Lead-Fr ee
Eff ective Date
Code
(YY/WW)
Standar d
Product
Series
Description
Package /
Termination
Type
Standard
Series
RoHS
Compliant
Lead-Fr ee Ter mination
Composition