MCC TM Micro Commercial Components TIP105 TIP106 TIP107 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features * * * * * * * * * Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) PNP Plastic Medium-Power Silicon Transistors High DC Current Gain : hFE=2500 (Typ) @ IC=4.0Adc Low Collector-Emitter Saturation Voltage Monolithic Construction with Built-in Base-Emitter Shunt Resistors TO-220 Compact package Epoxy meets UL 94 V-0 flammability rating Moisure Sensitivity Level 1 Mounting Torgue: 5 in-lbs Maximum Halogen free available upon request by adding suffix "-HF" Maximum Ratings Symbol VCEO VCBO VEBO IC ICP IB PD TJ, TSTG Rating Collector-Emitter Voltage Collector-Base Voltage TIP105 TIP106 TIP107 TIP105 TIP106 TIP107 Emitter-Base Voltage Collector Current-continuous Collector Current-peak Base Current Collector Dissipation @TC=25OC O Derate above 25 C Junction Temperature Storage Temperature Rating Unit 60 80 100 V Parameter 60 80 100 5.0 8.0 15 1.0 80 0.64 -55 to +150 -55 to +150 Min S V Q V A A A W O W/ C O C O C Max T A U 1 2 ICEO ICBO IEBO Collector-Emitter Sustaining Voltage (IC=30mAdc, IB=0) TIP105 TIP106 TIP107 Collector Cut-off Current (VCE=30Vdc, IB=0) TIP105 (VCE=40Vdc, IB=0) TIP106 (VCE=50Vdc, IB=0) TIP107 Collector Cut-off Current (VCB=60Vdc, IE=0) TIP105 (VCB=80Vdc, IE=0) TIP106 (VCB=100Vdc, IE=0) TIP107 Emitter Cut-off Current (VBE=5.0Vdc, IC=0) K Units V L ------- ------- 50 50 50 ------- 50 50 50 --- 8.0 N ----- 20000 --- mAdc ---- 2.0 2.5 Vdc --- 2.8 Vdc 4.0 --- --- --- 300 PIN 1. PIN 2. PIN 3. uAdc uAdc R G Vdc hFE(1) 1000 200 J D 60 80 100 ON CHARACTERISTICS(1) DC Current Gain (IC=3.0Adc, VCE=4.0Vdc) (IC=8.0Adc, VCE=4.0Vdc) VCE(sat) Collector-Emitter Saturation Voltage (IC=3.0Adc, IB=6.0mAdc) (IC=8.0Adc, IB=80mAdc) VBE(ON) Base-Emitter On Voltage (IC=8.0Adc,VCE=4.0Adc) hfe Small-Signal Current Gain (IC=3.0Adc,VCE=4.0Vdc,f=1.0MHz) Cob Output Capacitance (VCB=10V, IE=0, f=0.1MHz) (1) Pulse Test: Pulse Width<300us, Duty Cycle<2% 3 H OFF CHARACTERISTICS VCEO(SUS) C B F Electrical Characteristics @ 25OC Unless Otherwise Specified Symbol TO-220 BASE COLLECTOR EMITTER DIM A B C DIMENSIONS INCHES MM MIN MAX MIN MAX .560 .625 14.22 15.88 .380 .420 9.65 10.67 .140 .190 3.56 4.82 D F G H J K L N .020 .139 .190 --.012 .500 .045 .190 .045 .161 .110 .250 .025 .580 .060 .210 0.51 3.53 2.29 --0.30 12.70 1.14 4.83 1.14 4.09 2.79 6.35 0.64 14.73 1.52 5.33 Q R S T U V .100 .080 .045 .230 ----.045 .135 .115 .055 .270 .050 ----- 2.54 2.04 1.14 5.84 ----1.15 3.43 2.92 1.39 6.86 1.27 ----- NOTE pF Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. www.mccsemi.com Revision: C 1 of 4 2013/01/01 MCC TIP105,106,107 Micro Commercial Components 5.0 ts 3.0 2.0 3.0 60 tf 1.0 t, TIME ( s) PD, POWER DISSIPATION (WATTS) TA TC 4.0 80 TC 2.0 40 0.7 0.5 0.3 0.2 1.0 20 TA 0 0.1 0.07 0.05 0.1 0 0 20 40 60 80 100 T, TEMPERATURE (C) 120 160 140 1.0 0.7 0.5 D = 0.5 0.3 0.2 0.2 tr VCC = 30 V IC/IB = 250 IB1 = IB2 TJ = 25C 0.2 td @ VBE(off) = 0 V 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (AMP) 5.0 7.0 10 Figure 2. Switching Times Figure 1. Power Derating r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) TM 0.1 0.1 0.07 0.05 P(pk) ZJC(t) = r(t) RJC RJC = 1.56C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN t1 READ TIME AT t1 t2 TJ(pk) - TC = P(pk) ZJC(t) DUTY CYCLE, D = t1/t2 0.05 0.02 0.03 0.02 0.01 0.01 0.01 0.02 SINGLE PULSE 0.05 0.1 0.2 0.5 1.0 2.0 5.0 t, TIME (ms) 10 20 50 100 200 500 1.0 k Figure 3. Thermal Response 20 IC, COLLECTOR CURRENT (mA) 10 5 ms 5.0 100 s 2.0 1 ms dc TJ = 150C BONDING WIRE LIMITED THERMALLY LIMITED @ TC = 25C SECOND BREAKDOWN LIMITED CURVES APPLY BELOW RATED VCEO 1.0 0.5 0.2 0.1 TIP105 TIP106 TIP107 0.05 0.02 1.0 10 2.0 5.0 20 50 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 100 Figure 4. Active-Region Safe Operating Area www.mccsemi.com Revision: C 2 of 4 2013/01/01 MCC TIP105,106,107 TM Micro Commercial Components 300 5000 3000 2000 TC = 25C VCE = 4.0 Vdc IC = 3.0 Adc TJ = 25C 200 C, CAPACITANCE (pF) h fe , SMALL-SIGNAL CURRENT GAIN 10,000 1000 500 300 200 100 50 30 20 10 1.0 Cob 100 Cib 70 50 2.0 5.0 10 20 50 100 f, FREQUENCY (kHz) 200 30 0.1 500 1000 0.2 Figure 5. Small-Signal Current Gain VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) VCE = 4.0 V hFE , DC CURRENT GAIN 10,000 TJ = 150C 25C 3000 2000 - 55C 1000 700 500 300 200 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (AMP) 50 100 Figure 6. Capacitance 20,000 7000 5000 0.5 1.0 2.0 5.0 10 20 VR, REVERSE VOLTAGE (VOLTS) 5.0 7.0 10 3.0 TJ = 25C 2.6 IC = 2.0 A 2.2 4.0 A 6.0 A 1.8 1.4 1.0 0.3 0.5 Figure 7. DC Current Gain 0.7 1.0 2.0 5.0 IB, BASE CURRENT (mA) 10 20 30 Figure 8. Collector Saturation Region 3.0 TJ = 25C V, VOLTAGE (VOLTS) 2.5 2.0 1.5 VBE @ VCE = 4.0 V VBE(sat) @ IC/IB = 250 1.0 0.5 0.1 VCE(sat) @ IC/IB = 250 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 IC, COLLECTOR CURRENT (AMP) Figure 9. "On" Voltages www.mccsemi.com Revision: C 3 of 4 2013/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-BP Bulk;1Kpcs/Box Note : Adding "-HF" suffix for halogen free, eg. Part Number-BP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: C 4 of 4 2013/01/01