TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
NPN LOW POWER SILICON TRANSISTOR
Qualified per MIL-PRF-19500/181
T4-LDS-0200 Rev. 1 (110597) Page 1 of 4
DEVICES LEVELS
2N718A 2N1613 JAN
2N1613L JANTX
JANTXV
ABSOLUTE MAXIMUM RATI NG S (TC = +25°C unless otherwise noted)
Parameters / Test Conditions Symbol Min. Unit
Collector-Emitter Voltage VCEO 30 Vdc
Collector-Base Voltage VCBO 75 Vdc
Emitter-Base Voltage VEBO 7.0 Vdc
Collector Current IC 500 mAdc
Total Power Dissipation
@ TA = +25°C
2N718A
2N1613, L PT 0.5
0.8 W
Total Power Dissipation
@ TC = +25°C
2N718A
2N1613, L PT 1.8
3.0 W
Operating & Storage Junction Temperature Range TJ, Tstg -65 to +200 °C
Thermal Resistance, Junction-to-Case
2N718A
2N1613, L RθJC 97
58 °C/W
(1) Derate linearly at 4.57 mW/°C for 2N1613, L and 2.85mW/°C for 2N718A for TA > +25°C
(2) Derate linearly at 17.2 mW/°C for 2N1613, L and 10.3mW/°C for 2N718A for TC > +25°C
ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted)
Parameters / Test Conditions Symbol Min. Max. Unit
OFF CHARACTERTICS
Collector-Emitter Breakdown Voltage
IC = 100µAdc V(BR)CEO 30 Vdc
Collector-Emitter Breakdown Voltage
IC = 100µAdc, RBE = 10 V(BR)CER 50 Vdc
Collector-Base Cutoff Current
VCB = 60Vdc
VCB = 75Vdc
ICBO 10
10
ηAdc
µAdc
Emitter-Base Cutoff Current
VEB = 5.0Vdc
VEB = 7.0Vdc
IEBO
10
10
ηA dc
µAdc
TO-18 (TO-206AA)
2N718A
TO-39 (TO-205AD)
2N1613
TO-5
2N1613L
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
T4-LDS-0200 Rev. 1 (110597) Page 2 of 4
ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted)
Parameters / Test Conditions Symbol Min. Max. Unit
ON CHARACTERISTICS (3)
Forward-Current Transfer Ratio
hFE
IC = 0.1mAdc, VCE = 10Vdc
IC = 10mAdc, VCE = 10Vdc
IC = 150mAdc, VCE = 10Vdc
IC = 500mAdc, VCE = 10Vdc
20
35
40
20
120
Collector-Emitter Saturation Voltage
VCE(sat)
Vdc
IC = 150mAdc, IB = 15mAdc 1.5
Base-Emitter Saturation Voltage
VBE(sat)
Vdc
IC = 150mAdc, IB = 15mAdc
1.3
DYNAMIC CHARACTERISTICS
Parameters / Test Conditions Symbol Min. Max. Unit
Magnitude of Small-Signal Forward Current Transfer Ratio
|hfe|
IC = 50mAdc, VCE = 10Vdc, f = 20MHz 3.0
Small-Signal Forward Current Transfer Ratio
hfe
IC = 1.0mAdc, VCE = 5Vdc, f = 1.0kHz
IC = 5.0mAdc, VCE = 10Vdc, f = 1.0kHz
30
35
100
150
Small-Signal Short Circuit Input Impedance
IC = 5.0mAdc, VCB = 10Vdc, f = 1.0kHz hib 4.0 8.0
Small-Signal Short Circuit Output Admittance
IC = 5.0mAdc, VCB = 10Vdc, f = 1.0kHz hob 1.0
η
Output Capacitance
VCB = 10Vdc, IE = 0, 100 kHz f 1.0MHz Cobo 25
pF
SWITCHING CHARACTERISTICS
Parameters / Test Conditions Symbol Min. Max. Unit
Turn-On Time & Turn-Off Time
(See Figure 5 of MIL-PRF-19500/181) ton + toff 30 ηs
(3) Pulse Test: Pulse Width = 300μs, Duty Cycle 2.0%
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
T4-LDS-0200 Rev. 1 (110597) Page 3 of 4
PACKAGE DIMENSIONS
NOTES:
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. This zone is controlled for automatic handling. The variation in actual diameter within this zone shall not exceed .010
inch (0.254 mm).
4. (Three leads) LU applies between L1 and L2. LD applies between L2 and .5 inch (12.70 mm) from seating plane.
Diameter is uncontrolled in L1 and beyond .5 inch (12.70 mm) from seating plane.
5. Measured from maximum diameter of the actual device.
6. Details of outline in this zone optional.
7. The collector shall be electrically connected to the case.
8. Lead number 1 - emitter; lead number 2 - base; lead number 3 - collector.
9. All three leads.
10. In accordance with ANSI Y14.5M, diameters are equivalent to Φx symbology.
FIGURE 1. Physical dimensions 2N718A (TO-18).
Dimensions
Symbol Inches Millimeters Notes
Min Max Min Max
CD .178 .195 4.52 4.95
CH .170 .210 4.32 5.33
HD .209 .230 5.31 5.84
LC .100 TP 2.54 TP 5
LD .016 .021 0.41 0.53 8, 9
LL .500 .750 12.70 19.05 7, 9
LU .016 .019 0.41 0.48 4, 8, 9
L1 .050 1.27 9
L2 .250 6.35 9
TL .028 .048 0.71 1.22 5
TW .036 .046 .91 1.17
P .100 2.54 3
Q .030 0.76 6
R .010 .025
α 45° TP 45° TP
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
T4-LDS-0200 Rev. 1 (110597) Page 4 of 4
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Beyond r (radius) maximum, TW shall be held for a minimum length of 0.011 inch (0.28 mm).
4. TL measured from maximum HD.
5. Outline in this zone is not controlled.
6. CD shall not vary more than .010 inch (0.25 mm) in zone P. This zone is controlled for automatic handling.
7. Leads at gauge plane .054 +.001, -.000 inch (1.37 +0.03, -0.000 mm) below seating plane shall be within .007 inch (0.18
mm) radius of true position (TP) at a maximum material condition (MMC) relative to the tab at MMC. The device may
be measured by direct methods or by the gauging procedure.
8. LU applies between L1 and L2. LU applies between L2 and LL minimum. Diameter is uncontrolled in L1 and beyond
LL minimum.
9. All three leads.
10. The collector shall be electrically and mechanically connected to the case.
11. r (radius) applies to both inside corners of tab.
12. For transistor types 2N1613, dimension LL is .500 inch (12.70 mm) minimum, and .750 inch (19.05 mm) maximum.
13. For transistor types 2N1613L, dimension LL is 1.500 inches (38.10 mm) minimum, and 1.750 inches (44.45 mm)
maximum.
14. Lead number 1 - emitter; lead number 2 - base; lead number 3 - collector.
FIGURE 2. Physical dimensions 2N1613 and 2N1613L (similar to TO-5 and TO-39).
Dimensions
Symbol Inches Millimeters Notes
Min Max Min Max
CH .240 .260 6.10 6.60
LC .200 TP 5.08 TP 7
LD .016 .021 0.41 0.53 8, 9
LL See notes 12 and 13
LU .016 .019 0.41 0.48 8, 9
L1 .050 1.27 8, 9
L2 .250 6.35 8, 9
HD .335 .370 8.51 9.40
CD .305 .335 7.75 8.51
P .100 2.54 6
Q .050 1.27 5
r .010 0.25
TL .029 .045 0.74 1.14 4
TW .028 .034 0.71 0.86
α 45° TP 45° TP 7