R TDK SMD Transformers Photoflash Capacitor Charging Transformer LDT565630T-011 RoHS Compliant: Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retar dants, PBB and PBDE, have not been used except for exempted applications. Mechanical 1 1 1 5.8 MAX 2 3 4 Bottom view 0.4 1 011 8 7 6 5 Top view ( 0.85 ) 5.8 MAX ( 0.85 ) ( 3.9 ) 3.0 MAX 5.6 +/- 0.2 1 1 0.6 1 Pad Layout Note : Non applicable application : Military, Medical. 1.3 Electrical Specifications at 25degreesC 3.6 1.3 6.2 Mass : 0.25 g Unit : mm. 1. Inductance 5,6 - 7,8 : 6.0uH +/-15% at 100kHz, 20mVrms 2. Leakage Inductance 5,6 - 7,8 ( short 1 - 4 ) : 200nH MAX. at 100kHz, 20mVrms 3. DC Resistance 5,6 - 7,8 : 110 mOhm MAX. 1 - 4 : 15.5 Ohm MAX. 4. Withstanding Voltage Schematics Pri. - Sec. : 500Vrms 5. Operating Temperature -20 ~ 110 deg. ( included self temperature rise ) 5 Np1 4 7 Ns Connect on PCB Maximum primary switching current : 1.5A at 100degreesC 1 6 Np2 waveform 8 1.5A Turns Ratio 1 : 15.4 +/- 3% Dot marks mean polarity 0A R TDK USA Corporation / Component Engineering Laboratory TDK Corporation / Japan PRELIMINARY Apr./14/2008