Microfused Technology M E A S U R E M E N T S P E C I A L T I E S MSP-400 EMI/RFI Protected Stainless Steel Isolated Pressure Transducer Low Cost OEM 100% Leak Proof Features No Leaks No Welds No "O" Rings No Silicone Oil One-piece Stainless Steel Construction Ranges up to 10,000 PSI or 700 BAR Amplified Outputs Excellent Accuracy Wide Operating Temperature Range Applications Pumps and Compressors Hydraulic/Pneumatic Systems Off Road Energy and Water Management Pressure Instrumentation Refrigeration Equipment Agriculture Equipment Train Braking Systems UL LISTED Description The MSP series pressure transducers set a new price-performance standard for low cost, high volume, commercial and industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids or gases. The transducer pressure cavity is machined from a solid piece of 17-4 PH stainless steel. The standard version includes a 1/4 NPT pipe thread allowing a leak-proof, all metal sealed system. There are no o-rings, welds or organics exposed to the pressure media. The durability is excellent. Measurement Specialties proprietary Microfused technology, derived from demanding aerospace applications, employs micromachined silicon piezoresistive strain gages, fused with high temperature glass to a stainless steel diaphragm. This approach achieves media compatibility simply and elegantly providing an exceptionally stable sensor without the p-n junctions of conventional micromachined sensors. This product is geared to the OEM customer using medium to high volumes. The standard version is suitable for many applications, but the dedicated design team at our Transducer Engineering Center stands ready to provide a semi-custom design where the volume and application warrants. S PECI FICATIONS Performance at 77F (25C): Pressure range Accuracy (combined linearity, hysteresis and repeatability) Media compatibility Pressure ports Pressure cycles Pressure overload Burst pressure Long term stability (1 year) 0 to 100, 250, 500, 1000, 2500, 5000, 10000 PSI (consult factory for compound ranges) (0 to 7, 17, 35, 70, 175, 350, 700 BAR) .5% of FS Span (for higher accuracy consult factory) 17-4 PH stainless steel (for other material consult factory) 1/4" NPT (for other ports consult factory) >108 full pressure cycles 2X rated pressure 5X or 20000PSI whichever is less 0.25% FS Span (typical) Electrical: Supply voltage Supply current Outputs 5VDC <10mA 10-30VDC <15mA 1-5VDC, fixed (4) 0.5 - 4.5VDC, ratiometric to supply (3) 4-20mA two wire (5) 2 ft PVC jacketed cable (for other options consult factory) 2% of FS Span (for tighter tolerances consult factory) 2% of FS Span (for tighter tolerances consult factory) 5K Ohm (min) for high level voltage 0 Ohms @ 10V (1100 Ohms @ 32V) for 4-20mA < 2mVRMS DC to 1KHz (Typical) Interface Zero offset Span tolerance Output load Noise Bandwidth (-3dB) ORDE R I N G ENV I RON M ENTA L Operating temperature range -40 to 185F (-40 to 85C), (For other temperature ranges consult factory) Compensated temperature range Zero thermal error Span thermal error Storage temperature range Shock 30 to 158F (0 to 70C) < 1.5% of FS Span < 1.5% of FS Span -40 to 212F (-40 to 100C) 50g, 11msec half sine shock per MIL standard 202F, method 213B, condition A 20g MIL-STD-810C, Procedure 514.2, Figure 514.2-2, curve L EN 50081-2 EN 50082-2 (10V/M, 26-1000MHz) EN 61326 (Effective July 1, 2001) Vibration EMI/RFI Immunity MSP400 Pressure Range P = PSI B = BAR Outputs 3 = 0.5 - 4.5VDC 4 = 1- 5VDC 5 = 4-20mA two wire 1= 2 ft. cable N = 1/4 NPT * * * for others consult factory Electrical Connections: Outputs: Red Black White 3/4 +Supply Ground Output 5 Red Black UNITED STATES Measurement Specialties, Inc. PO Box 799 Valley Forge, PA 19482 Tel: (610) 650-1500 Fax: (610) 650-1509 Email: sensors@msiusa.com Web site: www.msiusa.com P/N: 2001315 10/00 +Supply Output M E A S U R E M E N T S P E C I A L T I E S