W83194R-17/-17A 100MHZ AGP CLOCK FOR SIS CHIPSET W83194-17/17A Data Sheet Revision History Pages Dates Version Version Main Contents On Web 1 n.a. 2 n.a. 02/Apr 1.0 n.a. All of the versions before 0.50 are for internal use. 1.0 Change version and version on web site to 1.0 3 4 5 6 7 8 9 10 Please note that all data and specifications are subject to change without notice. All the trademarks of products and companies mentioned in this data sheet belong to their respective owners. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Winbond customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Winbond for any damages resulting from such improper use or sales. -1- Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 1.0 GENERAL DESCRIPTION The W83194R-17/-17A is a Clock Synthesizer, which provides all clocks required for high-speed RISC or CISC microprocessor such as Intel PentiumII, Pentium, AMD or Cyrix. Eight different frequencies of CPU, AGP and PCI clocks are externally selectable with smooth transitions. The W83194R-17/-17A provides AGP clocks especially for clone chipset. The highest CPU frequency provided by the W83194R-17 is up to 100MHz, but the one of W83194R-17A is up to 133MHz. The W83193R-17/-17A provides I2C serial bus interface to program the registers to enable or disable each clock outputs and choose the 0.5% or 1.5% center type spread spectrum to reduce EMI. The W83194R-17/-17A accepts a 14.318 MHz reference crystal as its input and runs on a 3.3V supply. High drive PCI and SDRAM CLOCK outputs typically provide greater than 1 V /ns slew rate into 30 pF loads. CPU CLOCK outputs typically provide better than 1 V /ns slew rate into 20 pF loads as maintaining 50 5% duty cycle. The fixed frequency outputs as REF, 24MHz, and 48 MHz provide better than 0.5V /ns slew rate. 2.0 PRODUCT FEATURES * Supports Pentium, Pentium Pro, Pentium II, AMD and Cyrix CPUs with I2C. * 4 CPU clocks * 12 SDRAM clocks for 3 DIMMs * Two AGP clocks * 6 PCI synchronous clocks. * Optional single or mixed supply: (Vdd = Vddq3 = Vddq2 = Vddq2b = 3.3V) or (Vdd =Vddq2 = Vddq3 = 3.3V, Vddq2b = 2.5V) * Skew form CPU to PCI clock -1 to 4 ns, center 2.6 ns, AGP to CPU sync. Skew 0 ns (250 ps) * Smooth frequency switch with selections from 60 MHz to 133 MHz CPU * I2C 2-Wire serial interface and I2C read back * 0.5% or 1.5% center type spread spectrum function to reduce EMI * Programmable registers to enable/stop each output and select modes (Mode as Tri-state or Normal) * MODE pin for power Management * 48 MHz for USB * 24 MHz for super I/O * 48-pin SSOP package -2- Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 3.0 BLOCK DIAGRAM 48MHz PLL2 /2 a X1 24MHz XTAL OSC X2 STOP PLL1 AGP(0:1) 2 STOP Spread Spectrum FS(0:2) MODE CPU3.3#_2.5 REF(0:1) 2 CPUCLK(0:3) 4 3 LATCH a 5 POR PCI clock Divder 12 3 STOP 5 SDRAM(0:11) PCICLK(0:4) PCICLK_F CPU_STOP# PCI_STOP# SDATA SCLK Control Logic Config. Reg. 4.0 PIN CONFIGURATION Vdd REF0/CPU3.3#_2.5 Vss Xin Xout Vddq3 PCICLK_F/*FS1 PCICLK0/*FS2 Vss PCICLK1 PCICLK2 PCICLK3 PCICLK4 Vddq3 AGP0 Vss CPU_STOP#/SDRAM11 PCI_STOP#/SDRAM10 Vddq3 SDRAM 9 SDRAM 8 Vss SDATA SDCLK -3- 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 Vddq2 AGP1 REF1 Vss CPUCLK0 CPUCLK1 Vddq2b CPUCLK2 CPUCLK3 Vss SDRAM 0 SDRAM 1 Vddq3 SDRAM 2 SDRAM 3 Vss SDRAM 4 SDRAM 5 Vddq3 SDRAM 6 SDRAM 7 Vss 48MHz/*FS0 24MHz/*MODE Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 5.0 PIN DESCRIPTION IN - Input OUT - Output I/O - Bi-directional Pin # - Active Low * - Internal 250k pull-up 5.1 Crystal I/O SYMBOL PIN I/O Xin 4 IN Xout 5 OUT FUNCTION Crystal input with internal loading capacitors and feedback resistors. Crystal output at 14.318MHz nominally. 5.2 CPU, SDRAM, PCI Clock Outputs SYMBOL PIN I/O 40,41,43,44 OUT Low skew (< 250ps) clock outputs for host frequencies such as CPU, Chipset and Cache. Vddq2b is the supply voltage for these outputs. 15,47 OUT Accelerate Graphic Port clock outputs 17 I/O If MODE =1 (default), then this pin is a SDRAM Clock buffered output. If MODE = 0 , then this pin is CPU_STOP# input used in power management mode for synchronously stopping the all CPU clocks. SDRAM10/ PCI_STOP# 18 I/O If MODE = 1 (default), then this pin is a SDRAM clock output. If MODE = 0, then this pin is PCI_STOP # and used in power management mode for synchronously stopping the all PCI clocks. SDRAM [0:9] 20,21,28,29,31 ,32,34, 35,37,38 O SDRAM clock outputs which have the same frequency as CPU clocks. 7 I/O Latched input for FS1 at initial power up for H/W selecting the output frequency of CPU, SDRAM and PCI clocks. CPUCLK [0:3] AGP [0:1] SDRAM11/ CPU_STOP# PCICLK_F/ *FS1 FUNCTION Free running PCI clock during normal operation. -4- Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 5.2 CPU, SDRAM, PCI Clock Outputs, continued SYMBOL PCICLK 0 / *FS2 PIN I/O 8 I/O FUNCTION Latched input for FS2 at initial power up for H/W selecting the output frequency of CPU, SDRAM and PCI clocks. PCI clock during normal operation. PCICLK [1:4] 10,11,12,13 OUT Low skew (< 250ps) PCI clock outputs. 5.3 I2C Control Interface SYMBOL PIN I/O FUNCTION 2 SDATA 23 I/O Serial data of I C 2-wire control interface SDCLK 24 IN Serial clock of I2C 2-wire control interface 5.4 Fixed Frequency Outputs SYMBOL REF0 / CPU3.3#_2.5 PIN I/O 2 I/O FUNCTION Internal 250k pull-up. Latched input for CPU3.3#_2.5 at initial power up. Reference clock during normal operation. Latched high - Vddq2b = 2.5V Latched low - Vddq2b = 3.3V REF1 46 I/O Internal 250k pull-up. 24MHz / *MODE 25 I/O Internal 250k pull-up. Latched input for MODE at initial power up. 24MHz output for super I/O during normal operation. 48MHz / *FS0 26 I/O Internal 250k pull-up. Latched input for FS0 at initial power up for H/W selecting the output frequency of CPU, SDRAM and PCI clocks. 48MHz output for USB during normal operation. 5.5 Power Pins SYMBOL PIN FUNCTION Vdd 1 Power supply for REF0 crystal and core logic. Vddq2 42 Power supply for AGP1, REF1either 2.5V or 3.3V. Vddq2b 48 Power supply for CPUCLK [0:3], either 2.5V or 3.3V Vddq3 6,14,19, 30, 36 Power supply for SDRAM, PCICLK and 48/24MHz outputs. Vss 3,9,16,22,27, 33,39,45 -5- Circuit Ground. Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 6.0 FREQUENCY SELECTION 6.1 W83194R-17 FREQUECY TABLE FS2 0 0 0 0 1 1 1 1 FS1 0 0 1 1 0 0 1 1 FS0 0 1 0 1 0 1 0 1 CPU, SDRAM (MHz) 60 66.8 68.5 75 75 83.3 90 100 PCI (MHz) 30 33.4 34.25 37.5 32 33.3 30 33.3 AGP (MHz) 60 66.8 68.5 75 64 66.6 60 66.6 REF (MHz) 14.318 14.318 14.318 14.318 14.318 14.318 14.318 14.318 PCI (MHz) 37.3 33.4 31 37.5 33.3 33.3 31.75 33.4 AGP (MHz) 74.7 66.8 62 75 66.6 66.6 63.5 66.8 REF (MHz) 14.318 14.318 14.318 14.318 14.318 14.318 14.318 14.318 6.2 W83194R-17A FREQUECY TABLE FS2 0 0 0 0 1 1 1 1 FS1 0 0 1 1 0 0 1 1 FS0 0 1 0 1 0 1 0 1 CPU, SDRAM (MHz) 112 66.8 124 75 133.3 83.3 95.25 100.2 7.0 CPU 3.3#_2.5 BUFFER SELECTION CPU 3.3#_2.5 (Pin 2) Input Level CPU Operate at 1 VDD = 2.5V 0 VDD = 3.3V -6- Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 8.0 FUNTION DESCRIPTION 8.1 POWER MANAGEMENT FUNCTIONS All clocks can be individually enabled or disabled via the 2-wire control interface. On power up, external circuitry should allow 3 ms for the VCO to stabilize prior to enabling clock outputs to assure correct pulse widths. When MODE=0, pins 18 and 17 are inputs (PCI_STOP#), (CPU_STOP#), when MODE=1, these functions are not available. A particular clock could be enabled as both the 2wire serial control interface and one of these pins indicate that it should be enabled. The W83194R-17/-17A may be disabled in the low state according to the following table in order to reduce power consumption. All clocks are stopped in the low state, but maintain a valid high period on transitions from running to stop. The CPU and PCI clocks transform between running and stop by waiting for one positive edge on PCICLK_F followed by negative edge on the clock of interest, after which high levels of the output are either enabled or disabled. CPU_STOP# PCI_STOP# CPU & AGP PCI OTHER CLKs XTAL & VCOs 0 0 LOW LOW RUNNING RUNNING 0 1 LOW RUNNING RUNNING RUNNING 1 0 RUNNING LOW RUNNING RUNNING 1 1 RUNNING RUNNING RUNNING RUNNING 8.2 2-WIRE I2C CONTROL INTERFACE The clock generator is a slave I2C component that can be read back the data stored in the latches for verification. All proceeding bytes must be sent to change one of the control bytes. The 2-wire control interface allows each clock output individually enabled or disabled. On power up, the W83194R-17/-17A initializes with default register settings, and then it optional to use the 2-wire control interface. The SDATA signal only changes when the SDCLK signal is low, and is stable when SDCLK is high during normal data transfer. There are only two exceptions. One is a high-to-low transition on SDATA while SDCLK is high used to indicate the beginning of a data transfer cycle. The other is a low-to-high transition on SDATA while SDCLK is high used to indicate the end of a data transfer cycle. Data is always sent as complete 8-bit bytes followed by an acknowledge generated. Byte writing starts with a start condition followed by 7-bit slave address and [1101 0010], command code checking [0000 0000], and byte count checking. After successful reception of each byte, an acknowledge (low) on the SDATA wire will be generated by the clock chip. Controller can start to write to internal I2C registers after the string of data. The sequence order is as follows: -7- Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A Bytes sequence order for I2C controller: Clock Address A(6:0) & R/W Ack 8 bits dummy Command code Ack 8 bits dummy Byte count Ack Byte0,1,2... until Stop Ack Byte2, 3, 4... until Stop Set R/W to 1 when read back the data sequence is as follows: Clock Address A(6:0) & R/W Ack Byte 0 Ack Byte 1 8.3 SERIAL CONTROL REGISTERS The Pin column lists the affected pin number and the @PowerUp column gives the state at true power up. Registers are set to the values shown only on true power up. "Command Code" byte and "Byte Count" byte must be sent following the acknowledge of the Address Byte. Although the data (bits) in these two bytes are considered "don't care", they must be sent and will be acknowledge. After that, the below described sequence (Register 0, Register 1, Register 2...) will be valid and acknowledged. 8.3.1 Register 0: CPU Frequency Select Register Bit @PowerUp Pin 7 0 - Description 0 = 1.5% Spread Spectrum Modulation 1 = 0.5% Spread Spectrum Modulation 6 0 - SSEL2 (Frequency table selection by software via I2C) 5 0 - SSEL1 (Frequency table selection by software via I2C) 4 0 - SSEL0 (Frequency table selection by software via I2C) 3 0 - 0 = Selection by hardware 1 = Selection by software I2C - Bit 6:4 2 0 - 0 = Spread Spectrum center spread type 1 = Spread Spectrum down spread type 1 0 - 0 = Normal 1 = Spread Spectrum enabled 0 0 - 0 = Running 1 = Tristate all outputs -8- Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A W83194R-17 Frequency table selection by software via I2C SSEL2 0 0 0 0 1 1 1 1 SSEL1 0 0 1 1 0 0 1 1 SSEL0 0 1 0 1 0 1 0 1 CPU, SDRAM (MHz) 60 66.8 68.5 75 75 83.3 90 100 PCI (MHz) 30 33.4 34.25 37.5 32 33.3 30 33.3 AGP (MHz) 60 66.8 68.5 75 64 66.6 60 66.6 REF (MHz) 14.318 14.318 14.318 14.318 14.318 14.318 14.318 14.318 AGP (MHz) 74.7 66.8 62 75 66.6 66.6 63.4 66.8 REF (MHz) 14.318 14.318 14.318 14.318 14.318 14.318 14.318 14.318 W83194R-17A Frequency table selection by software via I2C SSEL2 0 0 0 0 1 1 1 1 SSEL1 0 0 1 1 0 0 1 1 SSEL0 0 1 0 1 0 1 0 1 CPU, SDRAM (MHz) 112 66.8 124 75 133.3 83.3 95.25 100.2 PCI (MHz) 37.3 33.4 31 37.5 33.3 33.3 31.75 33.4 FUNCTION TABLE Function Outputs Description CPU PCI SDRAM REF IOAPIC Tri-State Hi-Z Hi-Z Hi-Z Hi-Z Hi-Z Normal See table See table CPU 14.318 14.318 8.3.2 Register 1: CPU, 48/24 MHz Clock Register (1 = Active, 0 = Inactive) Bit @PowerUp Pin 7 1 - Reserved 6 1 - Reserved 5 1 - Reserved 4 1 - Reserved 3 1 40 CPUCLK3 (Active / Inactive) 2 1 41 CPUCLK2 (Active / Inactive) 1 1 43 CPUCLK1 (Active / Inactive) 0 1 44 CPUCLK0 (Active / Inactive) -9- Description Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 8.3.3 Register 2: PCI Clock Register (1 = Active, 0 = Inactive) Bit @PowerUp Pin Description 7 X - Reserved 6 1 7 PCICLK_F (Active / Inactive) 5 1 15 AGP0 (Active / Inactive) 4 1 13 PCICLK4 (Active / Inactive) 3 1 12 PCICLK3 (Active / Inactive) 2 1 11 PCICLK2 (Active / Inactive) 1 1 10 PCICLk1 (Active / Inactive) 0 1 8 PCICLK0 (Active / Inactive) 8.3.4 Register 3: SDRAM Clock Register (1 = Active, 0 = Inactive) Bit @PowerUp Pin Description 7 1 28 SDRAM7 (Active / Inactive) 6 1 29 SDRAM6 (Active / Inactive) 5 1 31 SDRAM5 (Active / Inactive) 4 1 32 SDRAM4 (Active / Inactive) 3 1 34 SDRAM3 (Active / Inactive) 2 1 35 SDRAM2 (Active / Inactive) 1 1 37 SDRAM1 (Active / Inactive) 0 1 38 SDRAM0 (Active / Inactive) 8.3.5 Register 4: Additional SDRAM Clock Register (1 = Active, 0 = Inactive) Bit @PowerUp Pin Description 7 X - Reserved 6 X - Reserved 5 X - Reserved 4 X - Reserved 3 1 17 SDRAM11 (Active / Inactive) 2 1 18 SDRAM10 (Active / Inactive) 1 1 20 SDRAM9 (Active / Inactive) 0 1 21 SDRAM8 (Active / Inactive) - 10 - Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 8.3.6 Register 5: Peripheral Control (1 = Active, 0 = Inactive) Bit @PowerUp Pin Description 7 x - Reserved 6 x - Reserved 5 x - Reserved 4 1 47 3 x - Reserved 2 x - Reserved 1 1 46 REF1 (Active / Inactive) 0 1 2 REF0 (Active / Inactive) AGP1 (Active / Inactive) 8.3.7 Register 6: Reserved Register Bit @PowerUp Pin Description 7 X - Reserved 6 X - Reserved 5 X - Reserved 4 X - Reserved 3 X - Reserved 2 X - Reserved 1 X - Reserved 0 X - Reserved - 11 - Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 9.0 SPECIFICATIONS 9.1 ABSOLUTE MAXIMUM RATINGS Stresses greater than those listed in this table may cause permanent damage to the device. Precautions should be taken to avoid application of any voltage higher than the maximum rated voltages to this circuit. Maximum conditions for extended periods may affect reliability. Unused inputs must always be tied to an appropriate logic voltage level (Ground or Vdd). Symbol Parameter Rating Vdd , VIN Voltage on any pin with respect to GND - 0.5 V to + 7.0 V TSTG Storage Temperature - 65C to + 150C TB Ambient Temperature - 55C to + 125C TA Operating Temperature 0C to + 70C 9.2 AC CHARACTERISTICS Vdd = Vddq2= Vddq3 = 3.3V 5 %, Vddq2b = 2.375V~2.9V, TA = 0C to +70C Parameter Symbol Output Duty Cycle Min Typ Max Units Test Conditions 45 50 55 % Measured at 1.5V 4 ns 15 pF Load Measured at 1.5V 15 pF Load Measured at 1.5V CPU/SDRAM to PCI Offset tOFF Skew (CPU-CPU), (PCIPCI), (SDRAM-SDRAM) tSKEW 250 ps tCCJ 250 ps tJA 500 ps BWJ 500 KHz 0.4 1.6 ns 15 pF Load on CPU and PCI outputs CPU/SDRAM 1 Cycle to Cycle Jitter CPU/SDRAM Absolute Jitter Jitter Spectrum 20 dB Bandwidth from Center Output Rise (0.4V ~ 2.0V) tTLH & Fall (2.0V ~0.4V) Time tTHL Overshoot/Undershoot Vover 0.7 1.5 V 22 at source of 8 inch PCB run to 15 pF load VRBE 0.7 2.1 V Ring Back must not enter this range. Beyond Power Rails Ring Back Exclusion - 12 - Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 9.3 DC CHARACTERISTICS Vdd = Vddq2= Vddq3 = 3.3V 5 %, Vddq2b = 2.375V~2.9V, TA = 0C to +70C Parameter Symbol Min Typ Max Units 0.8 Vdc Test Conditions Input Low Voltage VIL Input High Voltage VIH Input Low Current IIL -66 A Input High Current IIH 5 A VOL 0.4 Vdc All outputs Vdc All outputs using 3.3V power Output Low Voltage 2.0 Vdc IOL = 4 mA Output High Voltage VOH 2.4 IOH = 4mA Tri-State leakage Current Ioz Dynamic Supply Current Idd3 10 A mA for Vdd + Vddq3 Dynamic Supply Current CPU = 66.6 MHz PCI = 33.3 Mhz with load Idd2 mA Same as above ICPUS3 mA Same as above ICPUS2 mA Same as above IPD3 mA for Vddq2 + Vddq2b CPU Stop Current for Vdd + Vddq3 CPU Stop Current for Vddq2 + Vddq2b PCI Stop Current for Vdd + Vddq3 - 13 - Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 9.4 BUFFER CHARACTERISTICS 9.4.1 TYPE 1 BUFFER FOR CPU (0:3) Parameter Symbol Min Pull-Up Current Min IOH(min) -27 Pull-Up Current Max IOH(max) Pull-Down Current Min IOL(min) Pull-Down Current Max IOL(max) Rise/Fall Time Min Between 0.4 V and 2.0 V TRF(min) Rise/Fall Time Max Between 0.4 V and 2.0 V TRF(max) Typ Max -27 27 0.4 1.6 Units Test Conditions mA Vout = 1.0 V mA Vout = 2.0V mA Vout = 1.2 V mA Vout = 0.3 V ns 10 pF Load ns 20 pF Load 9.4.2 TYPE 2 BUFFER FOR IOAPIC Parameter Symbol Pull-Up Current Min IOH(min) Pull-Up Current Max IOH(max) Pull-Down Current Min IOL(min) Pull-Down Current Max IOL(max) Rise/Fall Time Min Between 0.7 V and 1.7 V TRF(min) Rise/Fall Time Max Between 0.7 V and 1.7 V TRF(max) - 14 - Min Typ Max -29 28 0.4 1.8 Units Test Conditions mA Vout = 1.4 V mA Vout = 2.7V mA Vout = 1.0 V mA Vout = 0.2 V ns 10 pF Load ns 20 pF Load Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 9.4.3 TYPE 3 BUFFER FOR REF (0:1), 24MHZ, 48MHZ Parameter Symbol Min Pull-Up Current Min IOH(min) -29 Pull-Up Current Max IOH(max) Pull-Down Current Min IOL(min) Pull-Down Current Max IOL(max) Rise/Fall Time Min Between 0.8 V and 2.0 V TRF(min) Rise/Fall Time Max TRF(max) Typ Max -23 29 1.0 4.0 Units Test Conditions mA Vout = 1.0 V mA Vout = 3.135V mA Vout = 1.95 V mA Vout = 0.4 V ns 10 pF Load ns 20 pF Load Between 0.8 V and 2.0 V 9.4.4 TYPE 4 BUFFER FOR REF0 and SDRAM (0:11) Parameter Symbol Pull-Up Current Min IOH(min) Pull-Up Current Max IOH(max) Pull-Down Current Min IOL(min) Pull-Down Current Max IOL(max) Rise/Fall Time Min Between 0.8 V and 2.0 V TRF(min) Rise/Fall Time Max TRF(max) Min Typ Max Units Test Conditions mA Vout = 1.65V mA Vout = 3.135V mA Vout = 1.65 V mA Vout = 0.4 V ns 20 pF Load 1.3 ns 30 pF Load Max Units -46 53 0.5 Between 0.8 V and 2.0 V 9.4.5 TYPE 5 BUFFER FOR PCICLK (0:4,F) Parameter Symbol Min Pull-Up Current Min IOH(min) -33 Pull-Up Current Max IOH(max) Pull-Down Current Min IOL(min) Pull-Down Current Max IOL(max) Rise/Fall Time Min Between 0.8 V and 2.0 V TRF(min) Rise/Fall Time Max TRF(max) Typ -33 30 38 0.5 2.0 Test Conditions mA Vout = 1.0 V mA Vout = 3.135 V mA Vout = 1.95 V mA Vout = 0.4 V ns 15 pF Load ns 30 pF Load Between 0.8 V and 2.0 V - 15 - Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 10.0 POWER MANAGEMENT TIMING 10.1 CPU_STOP# Timing Diagram CPUCLK (Internal) 2 1 2 1 PCICLK (Internal) PCICLK_F CPU_STOP# CPUCLK[0:3] SDRAM For synchronous Chipset, CPU_STOP# pin is a synchronous " active low " input pin used to stop the CPU clocks for low power operation. This pin is asserted synchronously by the external control logic at the rising edge of free running PCI clock (PCICLK_F). All other clocks will continue to run while the CPU clocks are stopped. The CPU clocks will always be stopped in a low state and resume output with full pulse width. In this case, CPU locks on latency" is less than 2 CPU clocks and locks off latency" is less then 2 CPU clocks. 10.2 PCI_STOP# Timing Diagram CPUCLK (Internal) 1 PCICLK (Internal) 2 1 2 PCICLK_F PCI_STOP# PCICLK[0:4] For synchronous Chipset, PCI_STOP# pin is a synchronous ctive low" input pin used to stop the PCICLK [0:4] for low power operation. This pin is asserted synchronously by the external control logic at the rising edge of free running PCI clock (PCICLK_F). All other clocks will continue to run while the PCI clocks are stopped. The PCI clocks will always be stopped in a low state and resume output with full pulse width. In this case, PCI locks on latency" is less than 1 PCI clocks and locks off latency" is less then 1 PCI clocks. - 16 - Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 11.0 OPERATION OF DUAL FUCTION PINS Pins 2, 7, 8, 25, and 26 are dual function pins and are used for selecting different functions in this device (see Pin description). During power up, these pins are in input mode (see Fig1), therefore, and are considered input select pins. When Vdd reaches 2.5V, the logic level that is present on these pins are latched into their appropriate internal registers. Once the correct information is properly latched, these pins will change into output pins and will be pulled low by default. At the end of the power up timer (within 3 ms) outputs starts to toggle at the specified frequency. 2.5V #2 REF0/CPU3.3#_2.5 #7 PCICLK_F/FS1 #8 PCICLK0/FS2 #25 24/MODE #26 48/FS0 Output tri-state Output pull-low Within 3ms Input All other clocks Vdd Output tri-state Output Output pull-low Each of these pins is a large pull-up resistor (250 k @3.3V) inside. The default state will be logic 1, but the internal pull-up resistor may be too large when long traces or heavy load appear on these dual function pins. Under these conditions, an external 10 k resistor is recommended to be connected to Vdd if logic 1 is expected. Otherwise, the 10 k resistor is connected to ground if logic 0 is desired. The 10 k resistor should be place before the serious terminating resistor. Note that this logic will only be latched at initial power on. If optional EMI reducing capacitor is needed, they should be placed as close to the series terminating resistor as possible and after the series-terminating resistor. This capacitor has typical values ranging from 4.7pF to 22pF. - 17 - Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A Vdd 10k Series Terminating Resistor Device Pin Clock Trace EMI Reducing Cap 10k Optional Ground Ground Programming Header Vdd Pad Ground Pad 10k Device Pin Series Terminating Resistor Clock Trace EMI Reducing Cap Optional Ground - 18 - Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 12.0 POWER SUPPLY SUGGESTION 1.A solid ground plane should be placed around the clock device. Ground connections should be tied to this main ground plane as short as possible. No cuts should be made in the ground plane around the device. 2.C21, C22, C31, C36 are decoupling capacitors (0.1F surface mount, low ESR, ceramic capacitors.) They should be placed as possible as the Vdd pin and the ground via. 3.C1 and C2 are supplying filtering capacitors for low frequency power supply noise. A 22F (or 10F) tantalum capacitor is recommended. 4.Use of Ferrite Bead (FB) is recommended to further reduce the power supply noise. 5.The power supply race to the Vdd pins must be thick enough so that voltage drops across the trace resistance is negligible. Vdd (3.3V) C1 FB2 FB1 Vdd Plane C31 Vdd2 Plane 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C32 C33 C34 - 19 - 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 C21 Vdd2 (3.3Vor2.5V) C2 C22 C36 C35 Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 13.0 ORDERING INFORMATION Part Number Package Type Production Flow W83194R-17/-17A 48 PIN SSOP Commercial, 0C to +70C 14.0 HOW TO READ THE TOP MARKING W83194R-17 28051234 814GBB W83194R-17A 28051234 814GBB 1st line: Winbond logo and the type number: W83194R-17/-17A 2nd line: Tracking code 2 8051234 2: wafers manufactured in Winbond FAB 2 8051234: wafer production series lot number 3rd line: Tracking code 814 G B B 814: packages made in '98, week 14 G: assembly house ID; A means ASE, S means SPIL, G means GR BB: IC revision All the trade marks of products and companies mentioned in this data sheet belong to their respective owners. - 20 - Publication Release Date: Sep. 1998 Revision 1.0 W83194R-17/-17A 15.0 PACKAGE DRAWING AND DIMENSIONS Headquarters Winbond Electronics (H.K.) Ltd. Winbond Electronics No. 4, Creation Rd. III Science-Based Industrial Park Rm. 803, World Trade Square, Tower II (North America) Corp. Hsinchu, Taiwan TEL: 886-35-770066 123 Hoi Bun Rd., Kwun Tong 2727 North First Street Kowloon, Hong Kong San Jose, California 95134 TEL: 852-27516023-7 TEL: 1-408-9436666 FAX: 852-27552064 FAX: 1-408-9436668 FAX: 886-35-789467 www: http://www.winbond.com.tw/ Taipei Office 9F, No. 480, Rueiguang Road, Neihu District, Taipei, 114, Taiwan TEL: 886-2-81777168 FAX: 886-2-87153579 Please note that all data and specifications are subject to change without notice. All the trade marks of products and companies mentioned in this data sheet belong to their respective owners. These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Winbond customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Winbond for any damages resulting from such improper use or sale. - 21 - Publication Release Date: Sep. 1998 Revision 1.0