Technical Data Sheet Chip LED with Bi-Color(Multi-Color) 11-22/G6Y2C-A30/2T Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-Free. The product itself will remain within RoHS compliant version. Descriptions The 11-22 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Emitted Color Resin Color Type Material G6 AlGaInP Brilliant Yellow Green Y2 AlGaInP Brilliant Yellow Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002239 Prepared date: 5-Sep. -2009 Water Clear Rev 1 Page: 1 of 12 Prepared by: Xie Haitao 11-22/G6Y2C-A30/2T Package Outline Dimensions Notes: Tolerances Unless Dimension 0.1mm, Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002239 Prepared date: 5-Sep. -2009 Rev 1 Page: 2 of 12 Prepared by: Xie Haitao 11-22/G6Y2C-A30/2T Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF Power Dissipation Pd Peak Forward Current (Duty 1/10 @1KHz) IFP Electrostatic Discharge(HBM) ESD Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40~ +90 Soldering Temperature Tsol G6:25 mA Y2:25 G6:60 mW Y2:60 G6:60 mA Y2:60 G6:2000 V Y2:2000 Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002239 Prepared date: 5-Sep. -2009 Rev 1 Page: 3 of 12 Prepared by: Xie Haitao 11-22/G6Y2C-A30/2T Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Symbol Iv Viewing Angle Peak Wavelength Dominant Wavelength Min. Typ. Max. G6 57 ----- 225 Y2 112 ----- 450 ----- 60 ----- deg ----- nm 21/2 p G6 Y2 d G6 --------- Y2 ----- Spectrum Radiation G6 Bandwidth ----- Y2 Forward Voltage Reverse Current VF IR 575 589 573 591 20 15 --------- 1.7 2.0 2.4 Y2 1.7 2.0 2.4 ----- ----- Y2 mcd ----- G6 G6 Unit Condition 10 10 nm IF=20mA nm V A VR=5V Notes: 1.Tolerance of Luminous Intensity 11% Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002239 Prepared date: 5-Sep. -2009 Rev 1 Page: 4 of 12 Prepared by: Xie Haitao 11-22/G6Y2C-A30/2T Bin Range Of Luminous Intensity G6 Bin Min Max 1 57 90 2 90 140 3 140 225 Bin Min Max R 112 180 S 180 285 T 285 450 Unit Condition mcd IF =20mA Unit Condition mcd IF =20mA Y2 Notes: 1.Tolerance of Luminous Intensity 11% Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002239 Prepared date: 5-Sep. -2009 Rev 1 Page: 5 of 12 Prepared by: Xie Haitao 11-22/G6Y2C-A30/2T Typical Electro-Optical Characteristics Curves G6 Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002239 Prepared date: 5-Sep. -2009 Rev 1 Page: 6 of 12 Prepared by: Xie Haitao 11-22/G6Y2C-A30/2T Typical Electro-Optical Characteristics Curves Y2 Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002239 Prepared date: 5-Sep. -2009 Rev 1 Page: 7 of 12 Prepared by: Xie Haitao 11-22/G6Y2C-A30/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS REF: Forward Voltage Rank XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: Tolerances Unless Dimension 0.1mm,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002239 Prepared date: 5-Sep. -2009 Rev 1 Page: 8 of 12 Prepared by: Xie Haitao 11-22/G6Y2C-A30/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: Tolerances Unless Dimension 0.1mm , Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002239 Prepared date: 5-Sep. -2009 Desiccant Rev 1 Label Page: 9 of 12 Prepared by: Xie Haitao 11-22/G6Y2C-A30/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 2 Temperature Cycle 3 Thermal Shock 4 5 High Temperature Storage Low Temperature Storage Test Sample Hours/Cycles Size Ac/Re 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002239 Prepared date: 5-Sep. -2009 Rev 1 Page: 10 of 12 Prepared by: Xie Haitao 11-22/G6Y2C-A30/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002239 Prepared date: 5-Sep. -2009 Rev 1 Page: 11 of 12 Prepared by: Xie Haitao 11-22/G6Y2C-A30/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0002239 Prepared date: 5-Sep. -2009 Rev 1 Page: 12 of 12 Prepared by: Xie Haitao